From b9b5ab11ea221a9f2d5af41da639e0898675c34c Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@linaro.org>
Date: Fri, 13 Sep 2013 21:45:51 +0200
Subject: [PATCH 1/4] clk: nomadik: set all timers to use 2.4 MHz TIMCLK
This fixes a regression for the Nomadik on the main system
timers.
The Nomadik seemed a bit slow and its heartbeat wasn't looking
healthy. And it was not strange, because it has been connected
to the 32768 Hz clock at boot, while being told by the clock driver
that it was 2.4MHz. Actually connect the TIMCLK to 2.4MHz by
default as this is what we want for nice scheduling, clocksource
and clock event.
Cc: stable@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
drivers/clk/clk-nomadik.c | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/drivers/clk/clk-nomadik.c b/drivers/clk/clk-nomadik.c
index 51410c2ac2cb6..4d978a3c88f74 100644
--- a/drivers/clk/clk-nomadik.c
+++ b/drivers/clk/clk-nomadik.c
@@ -27,6 +27,14 @@
*/
#define SRC_CR 0x00U
+#define SRC_CR_T0_ENSEL BIT(15)
+#define SRC_CR_T1_ENSEL BIT(17)
+#define SRC_CR_T2_ENSEL BIT(19)
+#define SRC_CR_T3_ENSEL BIT(21)
+#define SRC_CR_T4_ENSEL BIT(23)
+#define SRC_CR_T5_ENSEL BIT(25)
+#define SRC_CR_T6_ENSEL BIT(27)
+#define SRC_CR_T7_ENSEL BIT(29)
#define SRC_XTALCR 0x0CU
#define SRC_XTALCR_XTALTIMEN BIT(20)
#define SRC_XTALCR_SXTALDIS BIT(19)
@@ -543,6 +551,19 @@ void __init nomadik_clk_init(void)
__func__, np->name);
return;
}
+
+ /* Set all timers to use the 2.4 MHz TIMCLK */
+ val = readl(src_base + SRC_CR);
+ val |= SRC_CR_T0_ENSEL;
+ val |= SRC_CR_T1_ENSEL;
+ val |= SRC_CR_T2_ENSEL;
+ val |= SRC_CR_T3_ENSEL;
+ val |= SRC_CR_T4_ENSEL;
+ val |= SRC_CR_T5_ENSEL;
+ val |= SRC_CR_T6_ENSEL;
+ val |= SRC_CR_T7_ENSEL;
+ writel(val, src_base + SRC_CR);
+
val = readl(src_base + SRC_XTALCR);
pr_info("SXTALO is %s\n",
(val & SRC_XTALCR_SXTALDIS) ? "disabled" : "enabled");
From 1022c75f5abd3a3b25e679bc8793d21bedd009b4 Mon Sep 17 00:00:00 2001
From: Simon Guinot <simon.guinot@sequanux.org>
Date: Thu, 3 Oct 2013 12:05:02 +0200
Subject: [PATCH 2/4] clk: armada-370: fix tclk frequencies
This patch fixes the tclk frequency array for the Armada-370 SoC.
This bug has been introduced by commit 6b72333d
("clk: mvebu: add Armada 370 SoC-centric clock init").
A wrong tclk frequency affects the following drivers: mvsdio, mvneta,
i2c-mv64xxx and mvebu-devbus. This list may be incomplete.
About the mvneta Ethernet driver, note that the tclk frequency is used
to compute the Rx time coalescence. Then, this bug harms the coalescence
configuration and also degrades the networking performances with the
default values.
Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory CLEMENT <gregory.clement@free-electrons.com>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Cc: stable@vger.kernel.org
Signed-off-by: Michael Turquette <mturquette@deferred.io>
---
drivers/clk/mvebu/armada-370.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/mvebu/armada-370.c b/drivers/clk/mvebu/armada-370.c
index fc777bdc18865..81a202d12a7ad 100644
--- a/drivers/clk/mvebu/armada-370.c
+++ b/drivers/clk/mvebu/armada-370.c
@@ -39,8 +39,8 @@ static const struct coreclk_ratio a370_coreclk_ratios[] __initconst = {
};
static const u32 a370_tclk_freqs[] __initconst = {
- 16600000,
- 20000000,
+ 166000000,
+ 200000000,
};
static u32 __init a370_get_tclk_freq(void __iomem *sar)
From 79a2e998895ae3e75d6d3d9fdeec2be94bfcf6c8 Mon Sep 17 00:00:00 2001
From: Dinh Nguyen <dinguyen@altera.com>
Date: Tue, 17 Sep 2013 11:23:05 -0500
Subject: [PATCH 3/4] clk: socfpga: Fix incorrect sdmmc clock name
The SD/MMC clock is named "sdmmc_clk", and NOT "mmc_clk". Because of this,
the SD driver was getting the incorrect clock value. This prevented the
SD driver from initializing correctly.
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
CC: Arnd Bergmann <arnd@arndb.de>
CC: Olof Johansson <olof@lixom.net>
Reviewed-by: Pavel Machek <pavel@denx.de>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
drivers/clk/socfpga/clk.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/clk/socfpga/clk.c b/drivers/clk/socfpga/clk.c
index 5bb848cac6ece..81dd31a686df9 100644
--- a/drivers/clk/socfpga/clk.c
+++ b/drivers/clk/socfpga/clk.c
@@ -49,7 +49,7 @@
#define SOCFPGA_L4_SP_CLK "l4_sp_clk"
#define SOCFPGA_NAND_CLK "nand_clk"
#define SOCFPGA_NAND_X_CLK "nand_x_clk"
-#define SOCFPGA_MMC_CLK "mmc_clk"
+#define SOCFPGA_MMC_CLK "sdmmc_clk"
#define SOCFPGA_DB_CLK "gpio_db_clk"
#define div_mask(width) ((1 << (width)) - 1)
From 2f9f64bc5aa31836810cd25301aa4772ad73ebab Mon Sep 17 00:00:00 2001
From: Jonathan Austin <jonathan.austin@arm.com>
Date: Tue, 23 Jul 2013 16:42:18 +0100
Subject: [PATCH 4/4] clk: fixup argument order when setting VCO parameters
The order of arguments in the call to vco_set() for the ICST clocks appears to
have been switched in error, which results in the VCO not being initialised
correctly. This in turn stops the integrated LCD on things like Integrator/CP
from working correctly.
This patch fixes the order and restores the expected functionality.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Austin <jonathan.austin@arm.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Cc: stable@vger.kernel.org
---
drivers/clk/versatile/clk-icst.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/clk/versatile/clk-icst.c b/drivers/clk/versatile/clk-icst.c
index 67ccf4aa72773..f5e4c21b301f6 100644
--- a/drivers/clk/versatile/clk-icst.c
+++ b/drivers/clk/versatile/clk-icst.c
@@ -107,7 +107,7 @@ static int icst_set_rate(struct clk_hw *hw, unsigned long rate,
vco = icst_hz_to_vco(icst->params, rate);
icst->rate = icst_hz(icst->params, vco);
- vco_set(icst->vcoreg, icst->lockreg, vco);
+ vco_set(icst->lockreg, icst->vcoreg, vco);
return 0;
}