From 1645f44dd5b846a473d7789fe622c278eb880d48 Mon Sep 17 00:00:00 2001
From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
Date: Fri, 30 Sep 2022 16:20:59 +0200
Subject: [PATCH 01/12] net: phylink: add ability to validate a set of
 interface modes
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Rather than having the ability to validate all supported interface
modes or a single interface mode, introduce the ability to validate
a subset of supported modes.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
[ rebased on current net-next ]
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/phy/phylink.c | 17 ++++++++++-------
 1 file changed, 10 insertions(+), 7 deletions(-)

diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index d0af026c9afae..2cf388fad1be2 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -637,8 +637,9 @@ static int phylink_validate_mac_and_pcs(struct phylink *pl,
 	return phylink_is_empty_linkmode(supported) ? -EINVAL : 0;
 }
 
-static int phylink_validate_any(struct phylink *pl, unsigned long *supported,
-				struct phylink_link_state *state)
+static int phylink_validate_mask(struct phylink *pl, unsigned long *supported,
+				 struct phylink_link_state *state,
+				 const unsigned long *interfaces)
 {
 	__ETHTOOL_DECLARE_LINK_MODE_MASK(all_adv) = { 0, };
 	__ETHTOOL_DECLARE_LINK_MODE_MASK(all_s) = { 0, };
@@ -647,7 +648,7 @@ static int phylink_validate_any(struct phylink *pl, unsigned long *supported,
 	int intf;
 
 	for (intf = 0; intf < PHY_INTERFACE_MODE_MAX; intf++) {
-		if (test_bit(intf, pl->config->supported_interfaces)) {
+		if (test_bit(intf, interfaces)) {
 			linkmode_copy(s, supported);
 
 			t = *state;
@@ -668,12 +669,14 @@ static int phylink_validate_any(struct phylink *pl, unsigned long *supported,
 static int phylink_validate(struct phylink *pl, unsigned long *supported,
 			    struct phylink_link_state *state)
 {
-	if (!phy_interface_empty(pl->config->supported_interfaces)) {
+	const unsigned long *interfaces = pl->config->supported_interfaces;
+
+	if (!phy_interface_empty(interfaces)) {
 		if (state->interface == PHY_INTERFACE_MODE_NA)
-			return phylink_validate_any(pl, supported, state);
+			return phylink_validate_mask(pl, supported, state,
+						     interfaces);
 
-		if (!test_bit(state->interface,
-			      pl->config->supported_interfaces))
+		if (!test_bit(state->interface, interfaces))
 			return -EINVAL;
 	}
 

From fd580c9830316edad6f8b1d9f542563730658efe Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@armlinux.org.uk>
Date: Fri, 30 Sep 2022 16:21:00 +0200
Subject: [PATCH 02/12] net: sfp: augment SFP parsing with phy_interface_t
 bitmap
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

We currently parse the SFP EEPROM to a bitmap of ethtool link modes,
and then attempt to convert the link modes to a PHY interface mode.
While this works at present, there are cases where this is sub-optimal.
For example, where a module can operate with several different PHY
interface modes.

To start addressing this, arrange for the SFP EEPROM parsing to also
provide a bitmap of the possible PHY interface modes.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/phy/at803x.c          |  3 +-
 drivers/net/phy/marvell-88x2222.c |  3 +-
 drivers/net/phy/marvell.c         |  3 +-
 drivers/net/phy/marvell10g.c      |  3 +-
 drivers/net/phy/phylink.c         |  4 +-
 drivers/net/phy/sfp-bus.c         | 75 +++++++++++++++++++++++--------
 drivers/net/phy/sfp.c             |  7 ++-
 drivers/net/phy/sfp.h             |  3 +-
 include/linux/sfp.h               |  5 ++-
 9 files changed, 78 insertions(+), 28 deletions(-)

diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index 11ebd59bf2eb6..9e9adde335c83 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -676,6 +676,7 @@ static int at803x_sfp_insert(void *upstream, const struct sfp_eeprom_id *id)
 	struct phy_device *phydev = upstream;
 	__ETHTOOL_DECLARE_LINK_MODE_MASK(phy_support);
 	__ETHTOOL_DECLARE_LINK_MODE_MASK(sfp_support);
+	DECLARE_PHY_INTERFACE_MASK(interfaces);
 	phy_interface_t iface;
 
 	linkmode_zero(phy_support);
@@ -686,7 +687,7 @@ static int at803x_sfp_insert(void *upstream, const struct sfp_eeprom_id *id)
 	phylink_set(phy_support, Asym_Pause);
 
 	linkmode_zero(sfp_support);
-	sfp_parse_support(phydev->sfp_bus, id, sfp_support);
+	sfp_parse_support(phydev->sfp_bus, id, sfp_support, interfaces);
 	/* Some modules support 10G modes as well as others we support.
 	 * Mask out non-supported modes so the correct interface is picked.
 	 */
diff --git a/drivers/net/phy/marvell-88x2222.c b/drivers/net/phy/marvell-88x2222.c
index f070776ca904a..fd9ad48201924 100644
--- a/drivers/net/phy/marvell-88x2222.c
+++ b/drivers/net/phy/marvell-88x2222.c
@@ -478,6 +478,7 @@ static int mv2222_config_init(struct phy_device *phydev)
 
 static int mv2222_sfp_insert(void *upstream, const struct sfp_eeprom_id *id)
 {
+	DECLARE_PHY_INTERFACE_MASK(interfaces);
 	struct phy_device *phydev = upstream;
 	phy_interface_t sfp_interface;
 	struct mv2222_data *priv;
@@ -489,7 +490,7 @@ static int mv2222_sfp_insert(void *upstream, const struct sfp_eeprom_id *id)
 	priv = (struct mv2222_data *)phydev->priv;
 	dev = &phydev->mdio.dev;
 
-	sfp_parse_support(phydev->sfp_bus, id, sfp_supported);
+	sfp_parse_support(phydev->sfp_bus, id, sfp_supported, interfaces);
 	phydev->port = sfp_parse_port(phydev->sfp_bus, id, sfp_supported);
 	sfp_interface = sfp_select_interface(phydev->sfp_bus, sfp_supported);
 
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index a3e810705ce22..2810f4f9da0cc 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -2845,6 +2845,7 @@ static int marvell_probe(struct phy_device *phydev)
 
 static int m88e1510_sfp_insert(void *upstream, const struct sfp_eeprom_id *id)
 {
+	DECLARE_PHY_INTERFACE_MASK(interfaces);
 	struct phy_device *phydev = upstream;
 	phy_interface_t interface;
 	struct device *dev;
@@ -2856,7 +2857,7 @@ static int m88e1510_sfp_insert(void *upstream, const struct sfp_eeprom_id *id)
 
 	dev = &phydev->mdio.dev;
 
-	sfp_parse_support(phydev->sfp_bus, id, supported);
+	sfp_parse_support(phydev->sfp_bus, id, supported, interfaces);
 	interface = sfp_select_interface(phydev->sfp_bus, supported);
 
 	dev_info(dev, "%s SFP module inserted\n", phy_modes(interface));
diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c
index 2b7d0720720b6..05a5ed0899659 100644
--- a/drivers/net/phy/marvell10g.c
+++ b/drivers/net/phy/marvell10g.c
@@ -466,9 +466,10 @@ static int mv3310_sfp_insert(void *upstream, const struct sfp_eeprom_id *id)
 {
 	struct phy_device *phydev = upstream;
 	__ETHTOOL_DECLARE_LINK_MODE_MASK(support) = { 0, };
+	DECLARE_PHY_INTERFACE_MASK(interfaces);
 	phy_interface_t iface;
 
-	sfp_parse_support(phydev->sfp_bus, id, support);
+	sfp_parse_support(phydev->sfp_bus, id, support, interfaces);
 	iface = sfp_select_interface(phydev->sfp_bus, support);
 
 	if (iface != PHY_INTERFACE_MODE_10GBASER) {
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 2cf388fad1be2..b76bf8df83ff1 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -77,6 +77,7 @@ struct phylink {
 
 	struct sfp_bus *sfp_bus;
 	bool sfp_may_have_phy;
+	DECLARE_PHY_INTERFACE_MASK(sfp_interfaces);
 	__ETHTOOL_DECLARE_LINK_MODE_MASK(sfp_support);
 	u8 sfp_port;
 };
@@ -2898,7 +2899,8 @@ static int phylink_sfp_module_insert(void *upstream,
 	ASSERT_RTNL();
 
 	linkmode_zero(support);
-	sfp_parse_support(pl->sfp_bus, id, support);
+	phy_interface_zero(pl->sfp_interfaces);
+	sfp_parse_support(pl->sfp_bus, id, support, pl->sfp_interfaces);
 	pl->sfp_port = sfp_parse_port(pl->sfp_bus, id, support);
 
 	/* If this module may have a PHY connecting later, defer until later */
diff --git a/drivers/net/phy/sfp-bus.c b/drivers/net/phy/sfp-bus.c
index 0a9099c77694f..29e3fa86bac36 100644
--- a/drivers/net/phy/sfp-bus.c
+++ b/drivers/net/phy/sfp-bus.c
@@ -139,12 +139,14 @@ EXPORT_SYMBOL_GPL(sfp_may_have_phy);
  * @bus: a pointer to the &struct sfp_bus structure for the sfp module
  * @id: a pointer to the module's &struct sfp_eeprom_id
  * @support: pointer to an array of unsigned long for the ethtool support mask
+ * @interfaces: pointer to an array of unsigned long for phy interface modes
+ *		mask
  *
  * Parse the EEPROM identification information and derive the supported
  * ethtool link modes for the module.
  */
 void sfp_parse_support(struct sfp_bus *bus, const struct sfp_eeprom_id *id,
-		       unsigned long *support)
+		       unsigned long *support, unsigned long *interfaces)
 {
 	unsigned int br_min, br_nom, br_max;
 	__ETHTOOL_DECLARE_LINK_MODE_MASK(modes) = { 0, };
@@ -171,54 +173,81 @@ void sfp_parse_support(struct sfp_bus *bus, const struct sfp_eeprom_id *id,
 	}
 
 	/* Set ethtool support from the compliance fields. */
-	if (id->base.e10g_base_sr)
+	if (id->base.e10g_base_sr) {
 		phylink_set(modes, 10000baseSR_Full);
-	if (id->base.e10g_base_lr)
+		__set_bit(PHY_INTERFACE_MODE_10GBASER, interfaces);
+	}
+	if (id->base.e10g_base_lr) {
 		phylink_set(modes, 10000baseLR_Full);
-	if (id->base.e10g_base_lrm)
+		__set_bit(PHY_INTERFACE_MODE_10GBASER, interfaces);
+	}
+	if (id->base.e10g_base_lrm) {
 		phylink_set(modes, 10000baseLRM_Full);
-	if (id->base.e10g_base_er)
+		__set_bit(PHY_INTERFACE_MODE_10GBASER, interfaces);
+	}
+	if (id->base.e10g_base_er) {
 		phylink_set(modes, 10000baseER_Full);
+		__set_bit(PHY_INTERFACE_MODE_10GBASER, interfaces);
+	}
 	if (id->base.e1000_base_sx ||
 	    id->base.e1000_base_lx ||
-	    id->base.e1000_base_cx)
+	    id->base.e1000_base_cx) {
 		phylink_set(modes, 1000baseX_Full);
+		__set_bit(PHY_INTERFACE_MODE_1000BASEX, interfaces);
+	}
 	if (id->base.e1000_base_t) {
 		phylink_set(modes, 1000baseT_Half);
 		phylink_set(modes, 1000baseT_Full);
+		__set_bit(PHY_INTERFACE_MODE_1000BASEX, interfaces);
+		__set_bit(PHY_INTERFACE_MODE_SGMII, interfaces);
 	}
 
 	/* 1000Base-PX or 1000Base-BX10 */
 	if ((id->base.e_base_px || id->base.e_base_bx10) &&
-	    br_min <= 1300 && br_max >= 1200)
+	    br_min <= 1300 && br_max >= 1200) {
 		phylink_set(modes, 1000baseX_Full);
+		__set_bit(PHY_INTERFACE_MODE_1000BASEX, interfaces);
+	}
 
 	/* 100Base-FX, 100Base-LX, 100Base-PX, 100Base-BX10 */
-	if (id->base.e100_base_fx || id->base.e100_base_lx)
+	if (id->base.e100_base_fx || id->base.e100_base_lx) {
 		phylink_set(modes, 100baseFX_Full);
-	if ((id->base.e_base_px || id->base.e_base_bx10) && br_nom == 100)
+		__set_bit(PHY_INTERFACE_MODE_100BASEX, interfaces);
+	}
+	if ((id->base.e_base_px || id->base.e_base_bx10) && br_nom == 100) {
 		phylink_set(modes, 100baseFX_Full);
+		__set_bit(PHY_INTERFACE_MODE_100BASEX, interfaces);
+	}
 
 	/* For active or passive cables, select the link modes
 	 * based on the bit rates and the cable compliance bytes.
 	 */
 	if ((id->base.sfp_ct_passive || id->base.sfp_ct_active) && br_nom) {
 		/* This may look odd, but some manufacturers use 12000MBd */
-		if (br_min <= 12000 && br_max >= 10300)
+		if (br_min <= 12000 && br_max >= 10300) {
 			phylink_set(modes, 10000baseCR_Full);
-		if (br_min <= 3200 && br_max >= 3100)
+			__set_bit(PHY_INTERFACE_MODE_10GBASER, interfaces);
+		}
+		if (br_min <= 3200 && br_max >= 3100) {
 			phylink_set(modes, 2500baseX_Full);
-		if (br_min <= 1300 && br_max >= 1200)
+			__set_bit(PHY_INTERFACE_MODE_2500BASEX, interfaces);
+		}
+		if (br_min <= 1300 && br_max >= 1200) {
 			phylink_set(modes, 1000baseX_Full);
+			__set_bit(PHY_INTERFACE_MODE_1000BASEX, interfaces);
+		}
 	}
 	if (id->base.sfp_ct_passive) {
-		if (id->base.passive.sff8431_app_e)
+		if (id->base.passive.sff8431_app_e) {
 			phylink_set(modes, 10000baseCR_Full);
+			__set_bit(PHY_INTERFACE_MODE_10GBASER, interfaces);
+		}
 	}
 	if (id->base.sfp_ct_active) {
 		if (id->base.active.sff8431_app_e ||
 		    id->base.active.sff8431_lim) {
 			phylink_set(modes, 10000baseCR_Full);
+			__set_bit(PHY_INTERFACE_MODE_10GBASER, interfaces);
 		}
 	}
 
@@ -243,12 +272,14 @@ void sfp_parse_support(struct sfp_bus *bus, const struct sfp_eeprom_id *id,
 	case SFF8024_ECC_10GBASE_T_SFI:
 	case SFF8024_ECC_10GBASE_T_SR:
 		phylink_set(modes, 10000baseT_Full);
+		__set_bit(PHY_INTERFACE_MODE_10GBASER, interfaces);
 		break;
 	case SFF8024_ECC_5GBASE_T:
 		phylink_set(modes, 5000baseT_Full);
 		break;
 	case SFF8024_ECC_2_5GBASE_T:
 		phylink_set(modes, 2500baseT_Full);
+		__set_bit(PHY_INTERFACE_MODE_2500BASEX, interfaces);
 		break;
 	default:
 		dev_warn(bus->sfp_dev,
@@ -261,10 +292,14 @@ void sfp_parse_support(struct sfp_bus *bus, const struct sfp_eeprom_id *id,
 	if (id->base.fc_speed_100 ||
 	    id->base.fc_speed_200 ||
 	    id->base.fc_speed_400) {
-		if (id->base.br_nominal >= 31)
+		if (id->base.br_nominal >= 31) {
 			phylink_set(modes, 2500baseX_Full);
-		if (id->base.br_nominal >= 12)
+			__set_bit(PHY_INTERFACE_MODE_2500BASEX, interfaces);
+		}
+		if (id->base.br_nominal >= 12) {
 			phylink_set(modes, 1000baseX_Full);
+			__set_bit(PHY_INTERFACE_MODE_1000BASEX, interfaces);
+		}
 	}
 
 	/* If we haven't discovered any modes that this module supports, try
@@ -277,14 +312,18 @@ void sfp_parse_support(struct sfp_bus *bus, const struct sfp_eeprom_id *id,
 	 * 2500BASE-X, so we allow some slack here.
 	 */
 	if (bitmap_empty(modes, __ETHTOOL_LINK_MODE_MASK_NBITS) && br_nom) {
-		if (br_min <= 1300 && br_max >= 1200)
+		if (br_min <= 1300 && br_max >= 1200) {
 			phylink_set(modes, 1000baseX_Full);
-		if (br_min <= 3200 && br_max >= 2500)
+			__set_bit(PHY_INTERFACE_MODE_1000BASEX, interfaces);
+		}
+		if (br_min <= 3200 && br_max >= 2500) {
 			phylink_set(modes, 2500baseX_Full);
+			__set_bit(PHY_INTERFACE_MODE_2500BASEX, interfaces);
+		}
 	}
 
 	if (bus->sfp_quirk && bus->sfp_quirk->modes)
-		bus->sfp_quirk->modes(id, modes);
+		bus->sfp_quirk->modes(id, modes, interfaces);
 
 	linkmode_or(support, support, modes);
 
diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c
index cb1dbd0d9701a..b150e47658199 100644
--- a/drivers/net/phy/sfp.c
+++ b/drivers/net/phy/sfp.c
@@ -331,13 +331,16 @@ static void sfp_fixup_halny_gsfp(struct sfp *sfp)
 }
 
 static void sfp_quirk_2500basex(const struct sfp_eeprom_id *id,
-				unsigned long *modes)
+				unsigned long *modes,
+				unsigned long *interfaces)
 {
 	linkmode_set_bit(ETHTOOL_LINK_MODE_2500baseX_Full_BIT, modes);
+	__set_bit(PHY_INTERFACE_MODE_2500BASEX, interfaces);
 }
 
 static void sfp_quirk_ubnt_uf_instant(const struct sfp_eeprom_id *id,
-				      unsigned long *modes)
+				      unsigned long *modes,
+				      unsigned long *interfaces)
 {
 	/* Ubiquiti U-Fiber Instant module claims that support all transceiver
 	 * types including 10G Ethernet which is not truth. So clear all claimed
diff --git a/drivers/net/phy/sfp.h b/drivers/net/phy/sfp.h
index 7ad06deae76c1..6cf1643214d3e 100644
--- a/drivers/net/phy/sfp.h
+++ b/drivers/net/phy/sfp.h
@@ -9,7 +9,8 @@ struct sfp;
 struct sfp_quirk {
 	const char *vendor;
 	const char *part;
-	void (*modes)(const struct sfp_eeprom_id *id, unsigned long *modes);
+	void (*modes)(const struct sfp_eeprom_id *id, unsigned long *modes,
+		      unsigned long *interfaces);
 	void (*fixup)(struct sfp *sfp);
 };
 
diff --git a/include/linux/sfp.h b/include/linux/sfp.h
index 302094b855fba..d1f343853b6c7 100644
--- a/include/linux/sfp.h
+++ b/include/linux/sfp.h
@@ -535,7 +535,7 @@ int sfp_parse_port(struct sfp_bus *bus, const struct sfp_eeprom_id *id,
 		   unsigned long *support);
 bool sfp_may_have_phy(struct sfp_bus *bus, const struct sfp_eeprom_id *id);
 void sfp_parse_support(struct sfp_bus *bus, const struct sfp_eeprom_id *id,
-		       unsigned long *support);
+		       unsigned long *support, unsigned long *interfaces);
 phy_interface_t sfp_select_interface(struct sfp_bus *bus,
 				     unsigned long *link_modes);
 
@@ -568,7 +568,8 @@ static inline bool sfp_may_have_phy(struct sfp_bus *bus,
 
 static inline void sfp_parse_support(struct sfp_bus *bus,
 				     const struct sfp_eeprom_id *id,
-				     unsigned long *support)
+				     unsigned long *support,
+				     unsigned long *interfaces)
 {
 }
 

From f81fa96d8a6c7a7723b7cfa2ef8f6e514843d577 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@armlinux.org.uk>
Date: Fri, 30 Sep 2022 16:21:01 +0200
Subject: [PATCH 03/12] net: phylink: use phy_interface_t bitmaps for optical
 modules
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Where a MAC provides a phy_interface_t bitmap, use these bitmaps to
select the operating interface mode for optical SFP modules, rather
than using the linkmode bitmaps.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/phy/phylink.c | 164 +++++++++++++++++++++++++++++++-------
 1 file changed, 134 insertions(+), 30 deletions(-)

diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index b76bf8df83ff1..ab32ef767d69f 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -2803,6 +2803,70 @@ static void phylink_sfp_detach(void *upstream, struct sfp_bus *bus)
 	pl->netdev->sfp_bus = NULL;
 }
 
+static const phy_interface_t phylink_sfp_interface_preference[] = {
+	PHY_INTERFACE_MODE_25GBASER,
+	PHY_INTERFACE_MODE_USXGMII,
+	PHY_INTERFACE_MODE_10GBASER,
+	PHY_INTERFACE_MODE_5GBASER,
+	PHY_INTERFACE_MODE_2500BASEX,
+	PHY_INTERFACE_MODE_SGMII,
+	PHY_INTERFACE_MODE_1000BASEX,
+	PHY_INTERFACE_MODE_100BASEX,
+};
+
+static phy_interface_t phylink_choose_sfp_interface(struct phylink *pl,
+						    const unsigned long *intf)
+{
+	phy_interface_t interface;
+	size_t i;
+
+	interface = PHY_INTERFACE_MODE_NA;
+	for (i = 0; i < ARRAY_SIZE(phylink_sfp_interface_preference); i++)
+		if (test_bit(phylink_sfp_interface_preference[i], intf)) {
+			interface = phylink_sfp_interface_preference[i];
+			break;
+		}
+
+	return interface;
+}
+
+static void phylink_sfp_set_config(struct phylink *pl, u8 mode,
+				   unsigned long *supported,
+				   struct phylink_link_state *state)
+{
+	bool changed = false;
+
+	phylink_dbg(pl, "requesting link mode %s/%s with support %*pb\n",
+		    phylink_an_mode_str(mode), phy_modes(state->interface),
+		    __ETHTOOL_LINK_MODE_MASK_NBITS, supported);
+
+	if (!linkmode_equal(pl->supported, supported)) {
+		linkmode_copy(pl->supported, supported);
+		changed = true;
+	}
+
+	if (!linkmode_equal(pl->link_config.advertising, state->advertising)) {
+		linkmode_copy(pl->link_config.advertising, state->advertising);
+		changed = true;
+	}
+
+	if (pl->cur_link_an_mode != mode ||
+	    pl->link_config.interface != state->interface) {
+		pl->cur_link_an_mode = mode;
+		pl->link_config.interface = state->interface;
+
+		changed = true;
+
+		phylink_info(pl, "switched to %s/%s link mode\n",
+			     phylink_an_mode_str(mode),
+			     phy_modes(state->interface));
+	}
+
+	if (changed && !test_bit(PHYLINK_DISABLE_STOPPED,
+				 &pl->phylink_disable_state))
+		phylink_mac_initial_config(pl, false);
+}
+
 static int phylink_sfp_config(struct phylink *pl, u8 mode,
 			      const unsigned long *supported,
 			      const unsigned long *advertising)
@@ -2811,7 +2875,6 @@ static int phylink_sfp_config(struct phylink *pl, u8 mode,
 	__ETHTOOL_DECLARE_LINK_MODE_MASK(support);
 	struct phylink_link_state config;
 	phy_interface_t iface;
-	bool changed;
 	int ret;
 
 	linkmode_copy(support, supported);
@@ -2854,61 +2917,103 @@ static int phylink_sfp_config(struct phylink *pl, u8 mode,
 		return ret;
 	}
 
-	phylink_dbg(pl, "requesting link mode %s/%s with support %*pb\n",
-		    phylink_an_mode_str(mode), phy_modes(config.interface),
-		    __ETHTOOL_LINK_MODE_MASK_NBITS, support);
-
 	if (phy_interface_mode_is_8023z(iface) && pl->phydev)
 		return -EINVAL;
 
-	changed = !linkmode_equal(pl->supported, support) ||
-		  !linkmode_equal(pl->link_config.advertising,
-				  config.advertising);
-	if (changed) {
-		linkmode_copy(pl->supported, support);
-		linkmode_copy(pl->link_config.advertising, config.advertising);
+	pl->link_port = pl->sfp_port;
+
+	phylink_sfp_set_config(pl, mode, support, &config);
+
+	return 0;
+}
+
+static int phylink_sfp_config_optical(struct phylink *pl)
+{
+	__ETHTOOL_DECLARE_LINK_MODE_MASK(support);
+	DECLARE_PHY_INTERFACE_MASK(interfaces);
+	struct phylink_link_state config;
+	phy_interface_t interface;
+	int ret;
+
+	phylink_dbg(pl, "optical SFP: interfaces=[mac=%*pbl, sfp=%*pbl]\n",
+		    (int)PHY_INTERFACE_MODE_MAX,
+		    pl->config->supported_interfaces,
+		    (int)PHY_INTERFACE_MODE_MAX,
+		    pl->sfp_interfaces);
+
+	/* Find the union of the supported interfaces by the PCS/MAC and
+	 * the SFP module.
+	 */
+	phy_interface_and(interfaces, pl->config->supported_interfaces,
+			  pl->sfp_interfaces);
+	if (phy_interface_empty(interfaces)) {
+		phylink_err(pl, "unsupported SFP module: no common interface modes\n");
+		return -EINVAL;
 	}
 
-	if (pl->cur_link_an_mode != mode ||
-	    pl->link_config.interface != config.interface) {
-		pl->link_config.interface = config.interface;
-		pl->cur_link_an_mode = mode;
+	memset(&config, 0, sizeof(config));
+	linkmode_copy(support, pl->sfp_support);
+	linkmode_copy(config.advertising, pl->sfp_support);
+	config.speed = SPEED_UNKNOWN;
+	config.duplex = DUPLEX_UNKNOWN;
+	config.pause = MLO_PAUSE_AN;
+	config.an_enabled = true;
 
-		changed = true;
+	/* For all the interfaces that are supported, reduce the sfp_support
+	 * mask to only those link modes that can be supported.
+	 */
+	ret = phylink_validate_mask(pl, pl->sfp_support, &config, interfaces);
+	if (ret) {
+		phylink_err(pl, "unsupported SFP module: validation with support %*pb failed\n",
+			    __ETHTOOL_LINK_MODE_MASK_NBITS, support);
+		return ret;
+	}
 
-		phylink_info(pl, "switched to %s/%s link mode\n",
-			     phylink_an_mode_str(mode),
-			     phy_modes(config.interface));
+	interface = phylink_choose_sfp_interface(pl, interfaces);
+	if (interface == PHY_INTERFACE_MODE_NA) {
+		phylink_err(pl, "failed to select SFP interface\n");
+		return -EINVAL;
+	}
+
+	phylink_dbg(pl, "optical SFP: chosen %s interface\n",
+		    phy_modes(interface));
+
+	config.interface = interface;
+
+	/* Ignore errors if we're expecting a PHY to attach later */
+	ret = phylink_validate(pl, support, &config);
+	if (ret) {
+		phylink_err(pl, "validation with support %*pb failed: %pe\n",
+			    __ETHTOOL_LINK_MODE_MASK_NBITS, support,
+			    ERR_PTR(ret));
+		return ret;
 	}
 
 	pl->link_port = pl->sfp_port;
 
-	if (changed && !test_bit(PHYLINK_DISABLE_STOPPED,
-				 &pl->phylink_disable_state))
-		phylink_mac_initial_config(pl, false);
+	phylink_sfp_set_config(pl, MLO_AN_INBAND, pl->sfp_support, &config);
 
-	return ret;
+	return 0;
 }
 
 static int phylink_sfp_module_insert(void *upstream,
 				     const struct sfp_eeprom_id *id)
 {
 	struct phylink *pl = upstream;
-	unsigned long *support = pl->sfp_support;
 
 	ASSERT_RTNL();
 
-	linkmode_zero(support);
+	linkmode_zero(pl->sfp_support);
 	phy_interface_zero(pl->sfp_interfaces);
-	sfp_parse_support(pl->sfp_bus, id, support, pl->sfp_interfaces);
-	pl->sfp_port = sfp_parse_port(pl->sfp_bus, id, support);
+	sfp_parse_support(pl->sfp_bus, id, pl->sfp_support, pl->sfp_interfaces);
+	pl->sfp_port = sfp_parse_port(pl->sfp_bus, id, pl->sfp_support);
 
 	/* If this module may have a PHY connecting later, defer until later */
 	pl->sfp_may_have_phy = sfp_may_have_phy(pl->sfp_bus, id);
 	if (pl->sfp_may_have_phy)
 		return 0;
 
-	return phylink_sfp_config(pl, MLO_AN_INBAND, support, support);
+	return phylink_sfp_config_optical(pl);
 }
 
 static int phylink_sfp_module_start(void *upstream)
@@ -2927,8 +3032,7 @@ static int phylink_sfp_module_start(void *upstream)
 	if (!pl->sfp_may_have_phy)
 		return 0;
 
-	return phylink_sfp_config(pl, MLO_AN_INBAND,
-				  pl->sfp_support, pl->sfp_support);
+	return phylink_sfp_config_optical(pl);
 }
 
 static void phylink_sfp_module_stop(void *upstream)

From e60846370ca96a042d0e203782b84ed9558a8546 Mon Sep 17 00:00:00 2001
From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
Date: Fri, 30 Sep 2022 16:21:02 +0200
Subject: [PATCH 04/12] net: phylink: rename phylink_sfp_config()
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

phylink_sfp_config() now only deals with configuring the MAC for a
SFP containing a PHY. Rename it to be specific.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/phy/phylink.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index ab32ef767d69f..f6e9231f0cbe2 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -2867,9 +2867,8 @@ static void phylink_sfp_set_config(struct phylink *pl, u8 mode,
 		phylink_mac_initial_config(pl, false);
 }
 
-static int phylink_sfp_config(struct phylink *pl, u8 mode,
-			      const unsigned long *supported,
-			      const unsigned long *advertising)
+static int phylink_sfp_config_phy(struct phylink *pl, u8 mode,
+				  struct phy_device *phy)
 {
 	__ETHTOOL_DECLARE_LINK_MODE_MASK(support1);
 	__ETHTOOL_DECLARE_LINK_MODE_MASK(support);
@@ -2877,10 +2876,10 @@ static int phylink_sfp_config(struct phylink *pl, u8 mode,
 	phy_interface_t iface;
 	int ret;
 
-	linkmode_copy(support, supported);
+	linkmode_copy(support, phy->supported);
 
 	memset(&config, 0, sizeof(config));
-	linkmode_copy(config.advertising, advertising);
+	linkmode_copy(config.advertising, phy->advertising);
 	config.interface = PHY_INTERFACE_MODE_NA;
 	config.speed = SPEED_UNKNOWN;
 	config.duplex = DUPLEX_UNKNOWN;
@@ -3093,7 +3092,7 @@ static int phylink_sfp_connect_phy(void *upstream, struct phy_device *phy)
 		mode = MLO_AN_INBAND;
 
 	/* Do the initial configuration */
-	ret = phylink_sfp_config(pl, mode, phy->supported, phy->advertising);
+	ret = phylink_sfp_config_phy(pl, mode, phy);
 	if (ret < 0)
 		return ret;
 

From eca68a3c7d05b38b4e728cead0c49718f2bc1d5a Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel@kernel.org>
Date: Fri, 30 Sep 2022 16:21:03 +0200
Subject: [PATCH 05/12] net: phylink: pass supported host PHY interface modes
 to phylib for SFP's PHYs
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Pass the supported PHY interface types to phylib if the PHY we are
connecting is inside a SFP, so that the PHY driver can select an
appropriate host configuration mode for their interface according to
the host capabilities.

For example the Marvell 88X3310 PHY inside RollBall SFP modules
defaults to 10gbase-r mode on host's side, and the marvell10g
driver currently does not change this setting. But a host may not
support 10gbase-r. For example Turris Omnia only supports sgmii,
1000base-x and 2500base-x modes. The PHY can be configured to use
those modes, but in order for the PHY driver to do that, it needs
to know which modes are supported.

Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/phy/phylink.c | 17 +++++++++++++++++
 include/linux/phy.h       |  4 ++++
 2 files changed, 21 insertions(+)

diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index f6e9231f0cbe2..9ff8eb5166664 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -2814,6 +2814,8 @@ static const phy_interface_t phylink_sfp_interface_preference[] = {
 	PHY_INTERFACE_MODE_100BASEX,
 };
 
+static DECLARE_PHY_INTERFACE_MASK(phylink_sfp_interfaces);
+
 static phy_interface_t phylink_choose_sfp_interface(struct phylink *pl,
 						    const unsigned long *intf)
 {
@@ -3091,6 +3093,10 @@ static int phylink_sfp_connect_phy(void *upstream, struct phy_device *phy)
 	else
 		mode = MLO_AN_INBAND;
 
+	/* Set the PHY's host supported interfaces */
+	phy_interface_and(phy->host_interfaces, phylink_sfp_interfaces,
+			  pl->config->supported_interfaces);
+
 	/* Do the initial configuration */
 	ret = phylink_sfp_config_phy(pl, mode, phy);
 	if (ret < 0)
@@ -3444,4 +3450,15 @@ void phylink_mii_c45_pcs_get_state(struct mdio_device *pcs,
 }
 EXPORT_SYMBOL_GPL(phylink_mii_c45_pcs_get_state);
 
+static int __init phylink_init(void)
+{
+	for (int i = 0; i < ARRAY_SIZE(phylink_sfp_interface_preference); ++i)
+		__set_bit(phylink_sfp_interface_preference[i],
+			  phylink_sfp_interfaces);
+
+	return 0;
+}
+
+module_init(phylink_init);
+
 MODULE_LICENSE("GPL v2");
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 9c66f357f489c..d65fc76fe0aee 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -571,6 +571,7 @@ struct macsec_ops;
  * @advertising: Currently advertised linkmodes
  * @adv_old: Saved advertised while power saving for WoL
  * @lp_advertising: Current link partner advertised linkmodes
+ * @host_interfaces: PHY interface modes supported by host
  * @eee_broken_modes: Energy efficient ethernet modes which should be prohibited
  * @autoneg: Flag autoneg being used
  * @rate_matching: Current rate matching mode
@@ -670,6 +671,9 @@ struct phy_device {
 	/* used with phy_speed_down */
 	__ETHTOOL_DECLARE_LINK_MODE_MASK(adv_old);
 
+	/* Host supported PHY interface types. Should be ignored if empty. */
+	DECLARE_PHY_INTERFACE_MASK(host_interfaces);
+
 	/* Energy efficient ethernet modes which should be prohibited */
 	u32 eee_broken_modes;
 

From 3891569b2fc378e7fb882f5dbdc001ee8f78f024 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel@kernel.org>
Date: Fri, 30 Sep 2022 16:21:04 +0200
Subject: [PATCH 06/12] net: phy: marvell10g: Use tabs instead of spaces for
 indentation
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Some register definitions were defined with spaces used for indentation.
Change them to tabs.

Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/phy/marvell10g.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c
index 05a5ed0899659..06d0fe4b76c34 100644
--- a/drivers/net/phy/marvell10g.c
+++ b/drivers/net/phy/marvell10g.c
@@ -117,16 +117,16 @@ enum {
 	MV_V2_33X0_PORT_CTRL_MACTYPE_10GBASER_NO_SGMII_AN	= 0x5,
 	MV_V2_33X0_PORT_CTRL_MACTYPE_10GBASER_RATE_MATCH	= 0x6,
 	MV_V2_33X0_PORT_CTRL_MACTYPE_USXGMII			= 0x7,
-	MV_V2_PORT_INTR_STS     = 0xf040,
-	MV_V2_PORT_INTR_MASK    = 0xf043,
-	MV_V2_PORT_INTR_STS_WOL_EN      = BIT(8),
-	MV_V2_MAGIC_PKT_WORD0   = 0xf06b,
-	MV_V2_MAGIC_PKT_WORD1   = 0xf06c,
-	MV_V2_MAGIC_PKT_WORD2   = 0xf06d,
+	MV_V2_PORT_INTR_STS		= 0xf040,
+	MV_V2_PORT_INTR_MASK		= 0xf043,
+	MV_V2_PORT_INTR_STS_WOL_EN	= BIT(8),
+	MV_V2_MAGIC_PKT_WORD0		= 0xf06b,
+	MV_V2_MAGIC_PKT_WORD1		= 0xf06c,
+	MV_V2_MAGIC_PKT_WORD2		= 0xf06d,
 	/* Wake on LAN registers */
-	MV_V2_WOL_CTRL          = 0xf06e,
-	MV_V2_WOL_CTRL_CLEAR_STS        = BIT(15),
-	MV_V2_WOL_CTRL_MAGIC_PKT_EN     = BIT(0),
+	MV_V2_WOL_CTRL			= 0xf06e,
+	MV_V2_WOL_CTRL_CLEAR_STS	= BIT(15),
+	MV_V2_WOL_CTRL_MAGIC_PKT_EN	= BIT(0),
 	/* Temperature control/read registers (88X3310 only) */
 	MV_V2_TEMP_CTRL		= 0xf08a,
 	MV_V2_TEMP_CTRL_MASK	= 0xc000,

From d6d29292640d3f778a28a74c53ae1733c023392f Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@armlinux.org.uk>
Date: Fri, 30 Sep 2022 16:21:05 +0200
Subject: [PATCH 07/12] net: phy: marvell10g: select host interface
 configuration
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Select the host interface configuration according to the capabilities of
the host if the host provided them. This is currently provided only when
connecting PHY that is inside a SFP.

The PHY supports several configurations of host communication:
- always communicate with host in 10gbase-r, even if copper speed is
  lower (rate matching mode),
- the same as above but use xaui/rxaui instead of 10gbase-r,
- switch host SerDes mode between 10gbase-r, 5gbase-r, 2500base-x and
  sgmii according to copper speed,
- the same as above but use xaui/rxaui instead of 10gbase-r.

This mode of host communication, called MACTYPE, is by default selected
by strapping pins, but it can be changed in software.

This adds support for selecting this mode according to which modes are
supported by the host.

This allows the kernel to:
- support SFP modules with 88X33X0 or 88E21X0 inside them

Note: we use mv3310_select_mactype() for both 88X3310 and 88X3340,
although 88X3340 does not support XAUI. This is not a problem because
88X3340 does not declare XAUI in it's supported_interfaces, and so this
function will never choose that MACTYPE.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
[ rebase, updated, also added support for 88E21X0 ]
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/phy/marvell10g.c | 112 +++++++++++++++++++++++++++++++++++
 1 file changed, 112 insertions(+)

diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c
index 06d0fe4b76c34..383a9c9f36e54 100644
--- a/drivers/net/phy/marvell10g.c
+++ b/drivers/net/phy/marvell10g.c
@@ -96,6 +96,11 @@ enum {
 	MV_PCS_PORT_INFO_NPORTS_MASK	= 0x0380,
 	MV_PCS_PORT_INFO_NPORTS_SHIFT	= 7,
 
+	/* SerDes reinitialization 88E21X0 */
+	MV_AN_21X0_SERDES_CTRL2	= 0x800f,
+	MV_AN_21X0_SERDES_CTRL2_AUTO_INIT_DIS	= BIT(13),
+	MV_AN_21X0_SERDES_CTRL2_RUN_INIT	= BIT(15),
+
 	/* These registers appear at 0x800X and 0xa00X - the 0xa00X control
 	 * registers appear to set themselves to the 0x800X when AN is
 	 * restarted, but status registers appear readable from either.
@@ -140,6 +145,8 @@ struct mv3310_chip {
 	bool (*has_downshift)(struct phy_device *phydev);
 	void (*init_supported_interfaces)(unsigned long *mask);
 	int (*get_mactype)(struct phy_device *phydev);
+	int (*set_mactype)(struct phy_device *phydev, int mactype);
+	int (*select_mactype)(unsigned long *interfaces);
 	int (*init_interface)(struct phy_device *phydev, int mactype);
 
 #ifdef CONFIG_HWMON
@@ -594,6 +601,49 @@ static int mv2110_get_mactype(struct phy_device *phydev)
 	return mactype & MV_PMA_21X0_PORT_CTRL_MACTYPE_MASK;
 }
 
+static int mv2110_set_mactype(struct phy_device *phydev, int mactype)
+{
+	int err, val;
+
+	mactype &= MV_PMA_21X0_PORT_CTRL_MACTYPE_MASK;
+	err = phy_modify_mmd(phydev, MDIO_MMD_PMAPMD, MV_PMA_21X0_PORT_CTRL,
+			     MV_PMA_21X0_PORT_CTRL_SWRST |
+			     MV_PMA_21X0_PORT_CTRL_MACTYPE_MASK,
+			     MV_PMA_21X0_PORT_CTRL_SWRST | mactype);
+	if (err)
+		return err;
+
+	err = phy_set_bits_mmd(phydev, MDIO_MMD_AN, MV_AN_21X0_SERDES_CTRL2,
+			       MV_AN_21X0_SERDES_CTRL2_AUTO_INIT_DIS |
+			       MV_AN_21X0_SERDES_CTRL2_RUN_INIT);
+	if (err)
+		return err;
+
+	err = phy_read_mmd_poll_timeout(phydev, MDIO_MMD_AN,
+					MV_AN_21X0_SERDES_CTRL2, val,
+					!(val &
+					  MV_AN_21X0_SERDES_CTRL2_RUN_INIT),
+					5000, 100000, true);
+	if (err)
+		return err;
+
+	return phy_clear_bits_mmd(phydev, MDIO_MMD_AN, MV_AN_21X0_SERDES_CTRL2,
+				  MV_AN_21X0_SERDES_CTRL2_AUTO_INIT_DIS);
+}
+
+static int mv2110_select_mactype(unsigned long *interfaces)
+{
+	if (test_bit(PHY_INTERFACE_MODE_USXGMII, interfaces))
+		return MV_PMA_21X0_PORT_CTRL_MACTYPE_USXGMII;
+	else if (test_bit(PHY_INTERFACE_MODE_SGMII, interfaces) &&
+		 !test_bit(PHY_INTERFACE_MODE_10GBASER, interfaces))
+		return MV_PMA_21X0_PORT_CTRL_MACTYPE_5GBASER;
+	else if (test_bit(PHY_INTERFACE_MODE_10GBASER, interfaces))
+		return MV_PMA_21X0_PORT_CTRL_MACTYPE_10GBASER_RATE_MATCH;
+	else
+		return -1;
+}
+
 static int mv3310_get_mactype(struct phy_device *phydev)
 {
 	int mactype;
@@ -605,6 +655,46 @@ static int mv3310_get_mactype(struct phy_device *phydev)
 	return mactype & MV_V2_33X0_PORT_CTRL_MACTYPE_MASK;
 }
 
+static int mv3310_set_mactype(struct phy_device *phydev, int mactype)
+{
+	int ret;
+
+	mactype &= MV_V2_33X0_PORT_CTRL_MACTYPE_MASK;
+	ret = phy_modify_mmd_changed(phydev, MDIO_MMD_VEND2, MV_V2_PORT_CTRL,
+				     MV_V2_33X0_PORT_CTRL_MACTYPE_MASK,
+				     mactype);
+	if (ret <= 0)
+		return ret;
+
+	return phy_set_bits_mmd(phydev, MDIO_MMD_VEND2, MV_V2_PORT_CTRL,
+				MV_V2_33X0_PORT_CTRL_SWRST);
+}
+
+static int mv3310_select_mactype(unsigned long *interfaces)
+{
+	if (test_bit(PHY_INTERFACE_MODE_USXGMII, interfaces))
+		return MV_V2_33X0_PORT_CTRL_MACTYPE_USXGMII;
+	else if (test_bit(PHY_INTERFACE_MODE_SGMII, interfaces) &&
+		 test_bit(PHY_INTERFACE_MODE_10GBASER, interfaces))
+		return MV_V2_33X0_PORT_CTRL_MACTYPE_10GBASER;
+	else if (test_bit(PHY_INTERFACE_MODE_SGMII, interfaces) &&
+		 test_bit(PHY_INTERFACE_MODE_RXAUI, interfaces))
+		return MV_V2_33X0_PORT_CTRL_MACTYPE_RXAUI;
+	else if (test_bit(PHY_INTERFACE_MODE_SGMII, interfaces) &&
+		 test_bit(PHY_INTERFACE_MODE_XAUI, interfaces))
+		return MV_V2_3310_PORT_CTRL_MACTYPE_XAUI;
+	else if (test_bit(PHY_INTERFACE_MODE_10GBASER, interfaces))
+		return MV_V2_33X0_PORT_CTRL_MACTYPE_10GBASER_RATE_MATCH;
+	else if (test_bit(PHY_INTERFACE_MODE_RXAUI, interfaces))
+		return MV_V2_33X0_PORT_CTRL_MACTYPE_RXAUI_RATE_MATCH;
+	else if (test_bit(PHY_INTERFACE_MODE_XAUI, interfaces))
+		return MV_V2_3310_PORT_CTRL_MACTYPE_XAUI_RATE_MATCH;
+	else if (test_bit(PHY_INTERFACE_MODE_SGMII, interfaces))
+		return MV_V2_33X0_PORT_CTRL_MACTYPE_10GBASER;
+	else
+		return -1;
+}
+
 static int mv2110_init_interface(struct phy_device *phydev, int mactype)
 {
 	struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev);
@@ -688,6 +778,20 @@ static int mv3310_config_init(struct phy_device *phydev)
 	if (err)
 		return err;
 
+	/* If host provided host supported interface modes, try to select the
+	 * best one
+	 */
+	if (!phy_interface_empty(phydev->host_interfaces)) {
+		mactype = chip->select_mactype(phydev->host_interfaces);
+		if (mactype >= 0) {
+			phydev_info(phydev, "Changing MACTYPE to %i\n",
+				    mactype);
+			err = chip->set_mactype(phydev, mactype);
+			if (err)
+				return err;
+		}
+	}
+
 	mactype = chip->get_mactype(phydev);
 	if (mactype < 0)
 		return mactype;
@@ -1050,6 +1154,8 @@ static const struct mv3310_chip mv3310_type = {
 	.has_downshift = mv3310_has_downshift,
 	.init_supported_interfaces = mv3310_init_supported_interfaces,
 	.get_mactype = mv3310_get_mactype,
+	.set_mactype = mv3310_set_mactype,
+	.select_mactype = mv3310_select_mactype,
 	.init_interface = mv3310_init_interface,
 
 #ifdef CONFIG_HWMON
@@ -1061,6 +1167,8 @@ static const struct mv3310_chip mv3340_type = {
 	.has_downshift = mv3310_has_downshift,
 	.init_supported_interfaces = mv3340_init_supported_interfaces,
 	.get_mactype = mv3310_get_mactype,
+	.set_mactype = mv3310_set_mactype,
+	.select_mactype = mv3310_select_mactype,
 	.init_interface = mv3340_init_interface,
 
 #ifdef CONFIG_HWMON
@@ -1071,6 +1179,8 @@ static const struct mv3310_chip mv3340_type = {
 static const struct mv3310_chip mv2110_type = {
 	.init_supported_interfaces = mv2110_init_supported_interfaces,
 	.get_mactype = mv2110_get_mactype,
+	.set_mactype = mv2110_set_mactype,
+	.select_mactype = mv2110_select_mactype,
 	.init_interface = mv2110_init_interface,
 
 #ifdef CONFIG_HWMON
@@ -1081,6 +1191,8 @@ static const struct mv3310_chip mv2110_type = {
 static const struct mv3310_chip mv2111_type = {
 	.init_supported_interfaces = mv2111_init_supported_interfaces,
 	.get_mactype = mv2110_get_mactype,
+	.set_mactype = mv2110_set_mactype,
+	.select_mactype = mv2110_select_mactype,
 	.init_interface = mv2110_init_interface,
 
 #ifdef CONFIG_HWMON

From 31eb8907aa5b9e9be1a63f2ac574973715172ab4 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel@kernel.org>
Date: Fri, 30 Sep 2022 16:21:06 +0200
Subject: [PATCH 08/12] net: phylink: allow attaching phy for SFP modules on
 802.3z mode
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Some SFPs may contain an internal PHY which may in some cases want to
connect with the host interface in 1000base-x/2500base-x mode.
Do not fail if such PHY is being attached in one of these PHY interface
modes.

Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Pali Rohár <pali@kernel.org>
Cc: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/phy/phylink.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 9ff8eb5166664..75464df191ef7 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -1669,7 +1669,7 @@ static int phylink_attach_phy(struct phylink *pl, struct phy_device *phy,
 {
 	if (WARN_ON(pl->cfg_link_an_mode == MLO_AN_FIXED ||
 		    (pl->cfg_link_an_mode == MLO_AN_INBAND &&
-		     phy_interface_mode_is_8023z(interface))))
+		     phy_interface_mode_is_8023z(interface) && !pl->sfp_bus)))
 		return -EINVAL;
 
 	if (pl->phydev)
@@ -2918,9 +2918,6 @@ static int phylink_sfp_config_phy(struct phylink *pl, u8 mode,
 		return ret;
 	}
 
-	if (phy_interface_mode_is_8023z(iface) && pl->phydev)
-		return -EINVAL;
-
 	pl->link_port = pl->sfp_port;
 
 	phylink_sfp_set_config(pl, mode, support, &config);

From 13c8adcf221f1ff407115d3269e0fb57e8cecf82 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel@kernel.org>
Date: Fri, 30 Sep 2022 16:21:07 +0200
Subject: [PATCH 09/12] net: sfp: Add and use macros for SFP quirks definitions
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Add macros SFP_QUIRK(), SFP_QUIRK_M() and SFP_QUIRK_F() for defining SFP
quirk table entries. Use them to deduplicate the code a little bit.

Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/phy/sfp.c | 61 ++++++++++++++++++-------------------------
 1 file changed, 26 insertions(+), 35 deletions(-)

diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c
index b150e47658199..3201e2726e61e 100644
--- a/drivers/net/phy/sfp.c
+++ b/drivers/net/phy/sfp.c
@@ -350,42 +350,33 @@ static void sfp_quirk_ubnt_uf_instant(const struct sfp_eeprom_id *id,
 	linkmode_set_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT, modes);
 }
 
+#define SFP_QUIRK(_v, _p, _m, _f) \
+	{ .vendor = _v, .part = _p, .modes = _m, .fixup = _f, }
+#define SFP_QUIRK_M(_v, _p, _m) SFP_QUIRK(_v, _p, _m, NULL)
+#define SFP_QUIRK_F(_v, _p, _f) SFP_QUIRK(_v, _p, NULL, _f)
+
 static const struct sfp_quirk sfp_quirks[] = {
-	{
-		// Alcatel Lucent G-010S-P can operate at 2500base-X, but
-		// incorrectly report 2500MBd NRZ in their EEPROM
-		.vendor = "ALCATELLUCENT",
-		.part = "G010SP",
-		.modes = sfp_quirk_2500basex,
-	}, {
-		// Alcatel Lucent G-010S-A can operate at 2500base-X, but
-		// report 3.2GBd NRZ in their EEPROM
-		.vendor = "ALCATELLUCENT",
-		.part = "3FE46541AA",
-		.modes = sfp_quirk_2500basex,
-		.fixup = sfp_fixup_long_startup,
-	}, {
-		.vendor = "HALNy",
-		.part = "HL-GSFP",
-		.fixup = sfp_fixup_halny_gsfp,
-	}, {
-		// Huawei MA5671A can operate at 2500base-X, but report 1.2GBd
-		// NRZ in their EEPROM
-		.vendor = "HUAWEI",
-		.part = "MA5671A",
-		.modes = sfp_quirk_2500basex,
-		.fixup = sfp_fixup_ignore_tx_fault,
-	}, {
-		// Lantech 8330-262D-E can operate at 2500base-X, but
-		// incorrectly report 2500MBd NRZ in their EEPROM
-		.vendor = "Lantech",
-		.part = "8330-262D-E",
-		.modes = sfp_quirk_2500basex,
-	}, {
-		.vendor = "UBNT",
-		.part = "UF-INSTANT",
-		.modes = sfp_quirk_ubnt_uf_instant,
-	}
+	// Alcatel Lucent G-010S-P can operate at 2500base-X, but incorrectly
+	// report 2500MBd NRZ in their EEPROM
+	SFP_QUIRK_M("ALCATELLUCENT", "G010SP", sfp_quirk_2500basex),
+
+	// Alcatel Lucent G-010S-A can operate at 2500base-X, but report 3.2GBd
+	// NRZ in their EEPROM
+	SFP_QUIRK("ALCATELLUCENT", "3FE46541AA", sfp_quirk_2500basex,
+		  sfp_fixup_long_startup),
+
+	SFP_QUIRK_F("HALNy", "HL-GSFP", sfp_fixup_halny_gsfp),
+
+	// Huawei MA5671A can operate at 2500base-X, but report 1.2GBd NRZ in
+	// their EEPROM
+	SFP_QUIRK("HUAWEI", "MA5671A", sfp_quirk_2500basex,
+		  sfp_fixup_ignore_tx_fault),
+
+	// Lantech 8330-262D-E can operate at 2500base-X, but incorrectly report
+	// 2500MBd NRZ in their EEPROM
+	SFP_QUIRK_M("Lantech", "8330-262D-E", sfp_quirk_2500basex),
+
+	SFP_QUIRK_M("UBNT", "UF-INSTANT", sfp_quirk_ubnt_uf_instant),
 };
 
 static size_t sfp_strlen(const char *str, size_t maxlen)

From e85b1347ace677c3822c12d9332dfaaffe594da6 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel@kernel.org>
Date: Fri, 30 Sep 2022 16:21:08 +0200
Subject: [PATCH 10/12] net: sfp: create/destroy I2C mdiobus before PHY
 probe/after PHY release
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Instead of configuring the I2C mdiobus when SFP driver is probed,
create/destroy the mdiobus before the PHY is probed for/after it is
released.

This way we can tell the mdio-i2c code which protocol to use for each
SFP transceiver.

Move the code that determines MDIO I2C protocol from
sfp_sm_probe_for_phy() to sfp_sm_mod_probe(), where most of the SFP ID
parsing is done. Don't allocate I2C bus if no PHY is expected.

Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/phy/sfp.c         | 64 ++++++++++++++++++++++++++++-------
 include/linux/mdio/mdio-i2c.h |  6 ++++
 2 files changed, 57 insertions(+), 13 deletions(-)

diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c
index 3201e2726e61e..ccd7710685f2e 100644
--- a/drivers/net/phy/sfp.c
+++ b/drivers/net/phy/sfp.c
@@ -218,6 +218,7 @@ struct sfp {
 	struct i2c_adapter *i2c;
 	struct mii_bus *i2c_mii;
 	struct sfp_bus *sfp_bus;
+	enum mdio_i2c_proto mdio_protocol;
 	struct phy_device *mod_phy;
 	const struct sff_data *type;
 	size_t i2c_block_size;
@@ -530,9 +531,6 @@ static int sfp_i2c_write(struct sfp *sfp, bool a2, u8 dev_addr, void *buf,
 
 static int sfp_i2c_configure(struct sfp *sfp, struct i2c_adapter *i2c)
 {
-	struct mii_bus *i2c_mii;
-	int ret;
-
 	if (!i2c_check_functionality(i2c, I2C_FUNC_I2C))
 		return -EINVAL;
 
@@ -540,7 +538,15 @@ static int sfp_i2c_configure(struct sfp *sfp, struct i2c_adapter *i2c)
 	sfp->read = sfp_i2c_read;
 	sfp->write = sfp_i2c_write;
 
-	i2c_mii = mdio_i2c_alloc(sfp->dev, i2c);
+	return 0;
+}
+
+static int sfp_i2c_mdiobus_create(struct sfp *sfp)
+{
+	struct mii_bus *i2c_mii;
+	int ret;
+
+	i2c_mii = mdio_i2c_alloc(sfp->dev, sfp->i2c);
 	if (IS_ERR(i2c_mii))
 		return PTR_ERR(i2c_mii);
 
@@ -558,6 +564,12 @@ static int sfp_i2c_configure(struct sfp *sfp, struct i2c_adapter *i2c)
 	return 0;
 }
 
+static void sfp_i2c_mdiobus_destroy(struct sfp *sfp)
+{
+	mdiobus_unregister(sfp->i2c_mii);
+	sfp->i2c_mii = NULL;
+}
+
 /* Interface */
 static int sfp_read(struct sfp *sfp, bool a2, u8 addr, void *buf, size_t len)
 {
@@ -1674,6 +1686,14 @@ static void sfp_sm_fault(struct sfp *sfp, unsigned int next_state, bool warn)
 	}
 }
 
+static int sfp_sm_add_mdio_bus(struct sfp *sfp)
+{
+	if (sfp->mdio_protocol != MDIO_I2C_NONE)
+		return sfp_i2c_mdiobus_create(sfp);
+
+	return 0;
+}
+
 /* Probe a SFP for a PHY device if the module supports copper - the PHY
  * normally sits at I2C bus address 0x56, and may either be a clause 22
  * or clause 45 PHY.
@@ -1689,19 +1709,19 @@ static int sfp_sm_probe_for_phy(struct sfp *sfp)
 {
 	int err = 0;
 
-	switch (sfp->id.base.extended_cc) {
-	case SFF8024_ECC_10GBASE_T_SFI:
-	case SFF8024_ECC_10GBASE_T_SR:
-	case SFF8024_ECC_5GBASE_T:
-	case SFF8024_ECC_2_5GBASE_T:
-		err = sfp_sm_probe_phy(sfp, true);
+	switch (sfp->mdio_protocol) {
+	case MDIO_I2C_NONE:
 		break;
 
-	default:
-		if (sfp->id.base.e1000_base_t)
-			err = sfp_sm_probe_phy(sfp, false);
+	case MDIO_I2C_MARVELL_C22:
+		err = sfp_sm_probe_phy(sfp, false);
+		break;
+
+	case MDIO_I2C_C45:
+		err = sfp_sm_probe_phy(sfp, true);
 		break;
 	}
+
 	return err;
 }
 
@@ -2028,6 +2048,16 @@ static int sfp_sm_mod_probe(struct sfp *sfp, bool report)
 
 	sfp->tx_fault_ignore = false;
 
+	if (sfp->id.base.extended_cc == SFF8024_ECC_10GBASE_T_SFI ||
+	    sfp->id.base.extended_cc == SFF8024_ECC_10GBASE_T_SR ||
+	    sfp->id.base.extended_cc == SFF8024_ECC_5GBASE_T ||
+	    sfp->id.base.extended_cc == SFF8024_ECC_2_5GBASE_T)
+		sfp->mdio_protocol = MDIO_I2C_C45;
+	else if (sfp->id.base.e1000_base_t)
+		sfp->mdio_protocol = MDIO_I2C_MARVELL_C22;
+	else
+		sfp->mdio_protocol = MDIO_I2C_NONE;
+
 	sfp->quirk = sfp_lookup_quirk(&id);
 	if (sfp->quirk && sfp->quirk->fixup)
 		sfp->quirk->fixup(sfp);
@@ -2204,6 +2234,8 @@ static void sfp_sm_main(struct sfp *sfp, unsigned int event)
 			sfp_module_stop(sfp->sfp_bus);
 		if (sfp->mod_phy)
 			sfp_sm_phy_detach(sfp);
+		if (sfp->i2c_mii)
+			sfp_i2c_mdiobus_destroy(sfp);
 		sfp_module_tx_disable(sfp);
 		sfp_soft_stop_poll(sfp);
 		sfp_sm_next(sfp, SFP_S_DOWN, 0);
@@ -2266,6 +2298,12 @@ static void sfp_sm_main(struct sfp *sfp, unsigned int event)
 				     sfp->sm_fault_retries == N_FAULT_INIT);
 		} else if (event == SFP_E_TIMEOUT || event == SFP_E_TX_CLEAR) {
 	init_done:
+			/* Create mdiobus and start trying for PHY */
+			ret = sfp_sm_add_mdio_bus(sfp);
+			if (ret < 0) {
+				sfp_sm_next(sfp, SFP_S_FAIL, 0);
+				break;
+			}
 			sfp->sm_phy_retries = R_PHY_RETRY;
 			goto phy_probe;
 		}
diff --git a/include/linux/mdio/mdio-i2c.h b/include/linux/mdio/mdio-i2c.h
index b1d27f7cd23fb..3bde1a555a495 100644
--- a/include/linux/mdio/mdio-i2c.h
+++ b/include/linux/mdio/mdio-i2c.h
@@ -11,6 +11,12 @@ struct device;
 struct i2c_adapter;
 struct mii_bus;
 
+enum mdio_i2c_proto {
+	MDIO_I2C_NONE,
+	MDIO_I2C_MARVELL_C22,
+	MDIO_I2C_C45,
+};
+
 struct mii_bus *mdio_i2c_alloc(struct device *parent, struct i2c_adapter *i2c);
 
 #endif

From 09bbedac72d5a9267088c15d1a71c8c3a8fb47e7 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel@kernel.org>
Date: Fri, 30 Sep 2022 16:21:09 +0200
Subject: [PATCH 11/12] net: phy: mdio-i2c: support I2C MDIO protocol for
 RollBall SFP modules
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Some multigig SFPs from RollBall and Hilink do not expose functional
MDIO access to the internal PHY of the SFP via I2C address 0x56
(although there seems to be read-only clause 22 access on this address).

Instead these SFPs PHY can be accessed via I2C via the SFP Enhanced
Digital Diagnostic Interface - I2C address 0x51. The SFP_PAGE has to be
selected to 3 and the password must be filled with 0xff bytes for this
PHY communication to work.

This extends the mdio-i2c driver to support this protocol by adding a
special parameter to mdio_i2c_alloc function via which this RollBall
protocol can be selected.

Signed-off-by: Marek Behún <kabel@kernel.org>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/mdio/mdio-i2c.c   | 310 +++++++++++++++++++++++++++++++++-
 drivers/net/phy/sfp.c         |   6 +-
 include/linux/mdio/mdio-i2c.h |   4 +-
 3 files changed, 313 insertions(+), 7 deletions(-)

diff --git a/drivers/net/mdio/mdio-i2c.c b/drivers/net/mdio/mdio-i2c.c
index 09200a70b3151..bf8bf5e20fafe 100644
--- a/drivers/net/mdio/mdio-i2c.c
+++ b/drivers/net/mdio/mdio-i2c.c
@@ -3,6 +3,7 @@
  * MDIO I2C bridge
  *
  * Copyright (C) 2015-2016 Russell King
+ * Copyright (C) 2021 Marek Behun
  *
  * Network PHYs can appear on I2C buses when they are part of SFP module.
  * This driver exposes these PHYs to the networking PHY code, allowing
@@ -12,6 +13,7 @@
 #include <linux/i2c.h>
 #include <linux/mdio/mdio-i2c.h>
 #include <linux/phy.h>
+#include <linux/sfp.h>
 
 /*
  * I2C bus addresses 0x50 and 0x51 are normally an EEPROM, which is
@@ -28,7 +30,7 @@ static unsigned int i2c_mii_phy_addr(int phy_id)
 	return phy_id + 0x40;
 }
 
-static int i2c_mii_read(struct mii_bus *bus, int phy_id, int reg)
+static int i2c_mii_read_default(struct mii_bus *bus, int phy_id, int reg)
 {
 	struct i2c_adapter *i2c = bus->priv;
 	struct i2c_msg msgs[2];
@@ -62,7 +64,8 @@ static int i2c_mii_read(struct mii_bus *bus, int phy_id, int reg)
 	return data[0] << 8 | data[1];
 }
 
-static int i2c_mii_write(struct mii_bus *bus, int phy_id, int reg, u16 val)
+static int i2c_mii_write_default(struct mii_bus *bus, int phy_id, int reg,
+				 u16 val)
 {
 	struct i2c_adapter *i2c = bus->priv;
 	struct i2c_msg msg;
@@ -91,9 +94,288 @@ static int i2c_mii_write(struct mii_bus *bus, int phy_id, int reg, u16 val)
 	return ret < 0 ? ret : 0;
 }
 
-struct mii_bus *mdio_i2c_alloc(struct device *parent, struct i2c_adapter *i2c)
+/* RollBall SFPs do not access internal PHY via I2C address 0x56, but
+ * instead via address 0x51, when SFP page is set to 0x03 and password to
+ * 0xffffffff.
+ *
+ * address  size  contents  description
+ * -------  ----  --------  -----------
+ * 0x80     1     CMD       0x01/0x02/0x04 for write/read/done
+ * 0x81     1     DEV       Clause 45 device
+ * 0x82     2     REG       Clause 45 register
+ * 0x84     2     VAL       Register value
+ */
+#define ROLLBALL_PHY_I2C_ADDR		0x51
+
+#define ROLLBALL_PASSWORD		(SFP_VSL + 3)
+
+#define ROLLBALL_CMD_ADDR		0x80
+#define ROLLBALL_DATA_ADDR		0x81
+
+#define ROLLBALL_CMD_WRITE		0x01
+#define ROLLBALL_CMD_READ		0x02
+#define ROLLBALL_CMD_DONE		0x04
+
+#define SFP_PAGE_ROLLBALL_MDIO		3
+
+static int __i2c_transfer_err(struct i2c_adapter *i2c, struct i2c_msg *msgs,
+			      int num)
+{
+	int ret;
+
+	ret = __i2c_transfer(i2c, msgs, num);
+	if (ret < 0)
+		return ret;
+	else if (ret != num)
+		return -EIO;
+	else
+		return 0;
+}
+
+static int __i2c_rollball_get_page(struct i2c_adapter *i2c, int bus_addr,
+				   u8 *page)
+{
+	struct i2c_msg msgs[2];
+	u8 addr = SFP_PAGE;
+
+	msgs[0].addr = bus_addr;
+	msgs[0].flags = 0;
+	msgs[0].len = 1;
+	msgs[0].buf = &addr;
+
+	msgs[1].addr = bus_addr;
+	msgs[1].flags = I2C_M_RD;
+	msgs[1].len = 1;
+	msgs[1].buf = page;
+
+	return __i2c_transfer_err(i2c, msgs, 2);
+}
+
+static int __i2c_rollball_set_page(struct i2c_adapter *i2c, int bus_addr,
+				   u8 page)
+{
+	struct i2c_msg msg;
+	u8 buf[2];
+
+	buf[0] = SFP_PAGE;
+	buf[1] = page;
+
+	msg.addr = bus_addr;
+	msg.flags = 0;
+	msg.len = 2;
+	msg.buf = buf;
+
+	return __i2c_transfer_err(i2c, &msg, 1);
+}
+
+/* In order to not interfere with other SFP code (which possibly may manipulate
+ * SFP_PAGE), for every transfer we do this:
+ *   1. lock the bus
+ *   2. save content of SFP_PAGE
+ *   3. set SFP_PAGE to 3
+ *   4. do the transfer
+ *   5. restore original SFP_PAGE
+ *   6. unlock the bus
+ * Note that one might think that steps 2 to 5 could be theoretically done all
+ * in one call to i2c_transfer (by constructing msgs array in such a way), but
+ * unfortunately tests show that this does not work :-( Changed SFP_PAGE does
+ * not take into account until i2c_transfer() is done.
+ */
+static int i2c_transfer_rollball(struct i2c_adapter *i2c,
+				 struct i2c_msg *msgs, int num)
+{
+	int ret, main_err = 0;
+	u8 saved_page;
+
+	i2c_lock_bus(i2c, I2C_LOCK_SEGMENT);
+
+	/* save original page */
+	ret = __i2c_rollball_get_page(i2c, msgs->addr, &saved_page);
+	if (ret)
+		goto unlock;
+
+	/* change to RollBall MDIO page */
+	ret = __i2c_rollball_set_page(i2c, msgs->addr, SFP_PAGE_ROLLBALL_MDIO);
+	if (ret)
+		goto unlock;
+
+	/* do the transfer; we try to restore original page if this fails */
+	ret = __i2c_transfer_err(i2c, msgs, num);
+	if (ret)
+		main_err = ret;
+
+	/* restore original page */
+	ret = __i2c_rollball_set_page(i2c, msgs->addr, saved_page);
+
+unlock:
+	i2c_unlock_bus(i2c, I2C_LOCK_SEGMENT);
+
+	return main_err ? : ret;
+}
+
+static int i2c_rollball_mii_poll(struct mii_bus *bus, int bus_addr, u8 *buf,
+				 size_t len)
+{
+	struct i2c_adapter *i2c = bus->priv;
+	struct i2c_msg msgs[2];
+	u8 cmd_addr, tmp, *res;
+	int i, ret;
+
+	cmd_addr = ROLLBALL_CMD_ADDR;
+
+	res = buf ? buf : &tmp;
+	len = buf ? len : 1;
+
+	msgs[0].addr = bus_addr;
+	msgs[0].flags = 0;
+	msgs[0].len = 1;
+	msgs[0].buf = &cmd_addr;
+
+	msgs[1].addr = bus_addr;
+	msgs[1].flags = I2C_M_RD;
+	msgs[1].len = len;
+	msgs[1].buf = res;
+
+	/* By experiment it takes up to 70 ms to access a register for these
+	 * SFPs. Sleep 20ms between iterations and try 10 times.
+	 */
+	i = 10;
+	do {
+		msleep(20);
+
+		ret = i2c_transfer_rollball(i2c, msgs, ARRAY_SIZE(msgs));
+		if (ret)
+			return ret;
+
+		if (*res == ROLLBALL_CMD_DONE)
+			return 0;
+	} while (i-- > 0);
+
+	dev_dbg(&bus->dev, "poll timed out\n");
+
+	return -ETIMEDOUT;
+}
+
+static int i2c_rollball_mii_cmd(struct mii_bus *bus, int bus_addr, u8 cmd,
+				u8 *data, size_t len)
+{
+	struct i2c_adapter *i2c = bus->priv;
+	struct i2c_msg msgs[2];
+	u8 cmdbuf[2];
+
+	cmdbuf[0] = ROLLBALL_CMD_ADDR;
+	cmdbuf[1] = cmd;
+
+	msgs[0].addr = bus_addr;
+	msgs[0].flags = 0;
+	msgs[0].len = len;
+	msgs[0].buf = data;
+
+	msgs[1].addr = bus_addr;
+	msgs[1].flags = 0;
+	msgs[1].len = sizeof(cmdbuf);
+	msgs[1].buf = cmdbuf;
+
+	return i2c_transfer_rollball(i2c, msgs, ARRAY_SIZE(msgs));
+}
+
+static int i2c_mii_read_rollball(struct mii_bus *bus, int phy_id, int reg)
+{
+	u8 buf[4], res[6];
+	int bus_addr, ret;
+	u16 val;
+
+	if (!(reg & MII_ADDR_C45))
+		return -EOPNOTSUPP;
+
+	bus_addr = i2c_mii_phy_addr(phy_id);
+	if (bus_addr != ROLLBALL_PHY_I2C_ADDR)
+		return 0xffff;
+
+	buf[0] = ROLLBALL_DATA_ADDR;
+	buf[1] = (reg >> 16) & 0x1f;
+	buf[2] = (reg >> 8) & 0xff;
+	buf[3] = reg & 0xff;
+
+	ret = i2c_rollball_mii_cmd(bus, bus_addr, ROLLBALL_CMD_READ, buf,
+				   sizeof(buf));
+	if (ret < 0)
+		return ret;
+
+	ret = i2c_rollball_mii_poll(bus, bus_addr, res, sizeof(res));
+	if (ret == -ETIMEDOUT)
+		return 0xffff;
+	else if (ret < 0)
+		return ret;
+
+	val = res[4] << 8 | res[5];
+
+	return val;
+}
+
+static int i2c_mii_write_rollball(struct mii_bus *bus, int phy_id, int reg,
+				  u16 val)
+{
+	int bus_addr, ret;
+	u8 buf[6];
+
+	if (!(reg & MII_ADDR_C45))
+		return -EOPNOTSUPP;
+
+	bus_addr = i2c_mii_phy_addr(phy_id);
+	if (bus_addr != ROLLBALL_PHY_I2C_ADDR)
+		return 0;
+
+	buf[0] = ROLLBALL_DATA_ADDR;
+	buf[1] = (reg >> 16) & 0x1f;
+	buf[2] = (reg >> 8) & 0xff;
+	buf[3] = reg & 0xff;
+	buf[4] = val >> 8;
+	buf[5] = val & 0xff;
+
+	ret = i2c_rollball_mii_cmd(bus, bus_addr, ROLLBALL_CMD_WRITE, buf,
+				   sizeof(buf));
+	if (ret < 0)
+		return ret;
+
+	ret = i2c_rollball_mii_poll(bus, bus_addr, NULL, 0);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int i2c_mii_init_rollball(struct i2c_adapter *i2c)
+{
+	struct i2c_msg msg;
+	u8 pw[5];
+	int ret;
+
+	pw[0] = ROLLBALL_PASSWORD;
+	pw[1] = 0xff;
+	pw[2] = 0xff;
+	pw[3] = 0xff;
+	pw[4] = 0xff;
+
+	msg.addr = ROLLBALL_PHY_I2C_ADDR;
+	msg.flags = 0;
+	msg.len = sizeof(pw);
+	msg.buf = pw;
+
+	ret = i2c_transfer(i2c, &msg, 1);
+	if (ret < 0)
+		return ret;
+	else if (ret != 1)
+		return -EIO;
+	else
+		return 0;
+}
+
+struct mii_bus *mdio_i2c_alloc(struct device *parent, struct i2c_adapter *i2c,
+			       enum mdio_i2c_proto protocol)
 {
 	struct mii_bus *mii;
+	int ret;
 
 	if (!i2c_check_functionality(i2c, I2C_FUNC_I2C))
 		return ERR_PTR(-EINVAL);
@@ -104,10 +386,28 @@ struct mii_bus *mdio_i2c_alloc(struct device *parent, struct i2c_adapter *i2c)
 
 	snprintf(mii->id, MII_BUS_ID_SIZE, "i2c:%s", dev_name(parent));
 	mii->parent = parent;
-	mii->read = i2c_mii_read;
-	mii->write = i2c_mii_write;
 	mii->priv = i2c;
 
+	switch (protocol) {
+	case MDIO_I2C_ROLLBALL:
+		ret = i2c_mii_init_rollball(i2c);
+		if (ret < 0) {
+			dev_err(parent,
+				"Cannot initialize RollBall MDIO I2C protocol: %d\n",
+				ret);
+			mdiobus_free(mii);
+			return ERR_PTR(ret);
+		}
+
+		mii->read = i2c_mii_read_rollball;
+		mii->write = i2c_mii_write_rollball;
+		break;
+	default:
+		mii->read = i2c_mii_read_default;
+		mii->write = i2c_mii_write_default;
+		break;
+	}
+
 	return mii;
 }
 EXPORT_SYMBOL_GPL(mdio_i2c_alloc);
diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c
index ccd7710685f2e..20f48464a06a4 100644
--- a/drivers/net/phy/sfp.c
+++ b/drivers/net/phy/sfp.c
@@ -546,7 +546,7 @@ static int sfp_i2c_mdiobus_create(struct sfp *sfp)
 	struct mii_bus *i2c_mii;
 	int ret;
 
-	i2c_mii = mdio_i2c_alloc(sfp->dev, sfp->i2c);
+	i2c_mii = mdio_i2c_alloc(sfp->dev, sfp->i2c, sfp->mdio_protocol);
 	if (IS_ERR(i2c_mii))
 		return PTR_ERR(i2c_mii);
 
@@ -1720,6 +1720,10 @@ static int sfp_sm_probe_for_phy(struct sfp *sfp)
 	case MDIO_I2C_C45:
 		err = sfp_sm_probe_phy(sfp, true);
 		break;
+
+	case MDIO_I2C_ROLLBALL:
+		err = -EOPNOTSUPP;
+		break;
 	}
 
 	return err;
diff --git a/include/linux/mdio/mdio-i2c.h b/include/linux/mdio/mdio-i2c.h
index 3bde1a555a495..65b550a6fc329 100644
--- a/include/linux/mdio/mdio-i2c.h
+++ b/include/linux/mdio/mdio-i2c.h
@@ -15,8 +15,10 @@ enum mdio_i2c_proto {
 	MDIO_I2C_NONE,
 	MDIO_I2C_MARVELL_C22,
 	MDIO_I2C_C45,
+	MDIO_I2C_ROLLBALL,
 };
 
-struct mii_bus *mdio_i2c_alloc(struct device *parent, struct i2c_adapter *i2c);
+struct mii_bus *mdio_i2c_alloc(struct device *parent, struct i2c_adapter *i2c,
+			       enum mdio_i2c_proto protocol);
 
 #endif

From 324e88cbe3b7be03af67828469cedb52c8610bd1 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel@kernel.org>
Date: Fri, 30 Sep 2022 16:21:10 +0200
Subject: [PATCH 12/12] net: sfp: add support for multigig RollBall
 transceivers
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This adds support for multigig copper SFP modules from RollBall/Hilink.
These modules have a specific way to access clause 45 registers of the
internal PHY.

We also need to wait at least 22 seconds after deasserting TX disable
before accessing the PHY. The code waits for 25 seconds just to be sure.

Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/phy/sfp.c | 49 ++++++++++++++++++++++++++++++++++---------
 1 file changed, 39 insertions(+), 10 deletions(-)

diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c
index 20f48464a06a4..40c9a64c5e301 100644
--- a/drivers/net/phy/sfp.c
+++ b/drivers/net/phy/sfp.c
@@ -166,6 +166,7 @@ static const enum gpiod_flags gpio_flags[] = {
  * on board (for a copper SFP) time to initialise.
  */
 #define T_WAIT			msecs_to_jiffies(50)
+#define T_WAIT_ROLLBALL		msecs_to_jiffies(25000)
 #define T_START_UP		msecs_to_jiffies(300)
 #define T_START_UP_BAD_GPON	msecs_to_jiffies(60000)
 
@@ -205,8 +206,11 @@ static const enum gpiod_flags gpio_flags[] = {
 
 /* SFP modules appear to always have their PHY configured for bus address
  * 0x56 (which with mdio-i2c, translates to a PHY address of 22).
+ * RollBall SFPs access phy via SFP Enhanced Digital Diagnostic Interface
+ * via address 0x51 (mdio-i2c will use RollBall protocol on this address).
  */
-#define SFP_PHY_ADDR	22
+#define SFP_PHY_ADDR		22
+#define SFP_PHY_ADDR_ROLLBALL	17
 
 struct sff_data {
 	unsigned int gpios;
@@ -252,6 +256,7 @@ struct sfp {
 	struct sfp_eeprom_id id;
 	unsigned int module_power_mW;
 	unsigned int module_t_start_up;
+	unsigned int module_t_wait;
 	bool tx_fault_ignore;
 
 	const struct sfp_quirk *quirk;
@@ -331,6 +336,22 @@ static void sfp_fixup_halny_gsfp(struct sfp *sfp)
 	sfp->state_hw_mask &= ~(SFP_F_TX_FAULT | SFP_F_LOS);
 }
 
+static void sfp_fixup_rollball(struct sfp *sfp)
+{
+	sfp->mdio_protocol = MDIO_I2C_ROLLBALL;
+	sfp->module_t_wait = T_WAIT_ROLLBALL;
+}
+
+static void sfp_fixup_rollball_cc(struct sfp *sfp)
+{
+	sfp_fixup_rollball(sfp);
+
+	/* Some RollBall SFPs may have wrong (zero) extended compliance code
+	 * burned in EEPROM. For PHY probing we need the correct one.
+	 */
+	sfp->id.base.extended_cc = SFF8024_ECC_10GBASE_T_SFI;
+}
+
 static void sfp_quirk_2500basex(const struct sfp_eeprom_id *id,
 				unsigned long *modes,
 				unsigned long *interfaces)
@@ -378,6 +399,12 @@ static const struct sfp_quirk sfp_quirks[] = {
 	SFP_QUIRK_M("Lantech", "8330-262D-E", sfp_quirk_2500basex),
 
 	SFP_QUIRK_M("UBNT", "UF-INSTANT", sfp_quirk_ubnt_uf_instant),
+
+	SFP_QUIRK_F("OEM", "SFP-10G-T", sfp_fixup_rollball_cc),
+	SFP_QUIRK_F("OEM", "RTSFP-10", sfp_fixup_rollball_cc),
+	SFP_QUIRK_F("OEM", "RTSFP-10G", sfp_fixup_rollball_cc),
+	SFP_QUIRK_F("Turris", "RTSFP-10", sfp_fixup_rollball),
+	SFP_QUIRK_F("Turris", "RTSFP-10G", sfp_fixup_rollball),
 };
 
 static size_t sfp_strlen(const char *str, size_t maxlen)
@@ -1585,12 +1612,12 @@ static void sfp_sm_phy_detach(struct sfp *sfp)
 	sfp->mod_phy = NULL;
 }
 
-static int sfp_sm_probe_phy(struct sfp *sfp, bool is_c45)
+static int sfp_sm_probe_phy(struct sfp *sfp, int addr, bool is_c45)
 {
 	struct phy_device *phy;
 	int err;
 
-	phy = get_phy_device(sfp->i2c_mii, SFP_PHY_ADDR, is_c45);
+	phy = get_phy_device(sfp->i2c_mii, addr, is_c45);
 	if (phy == ERR_PTR(-ENODEV))
 		return PTR_ERR(phy);
 	if (IS_ERR(phy)) {
@@ -1714,15 +1741,15 @@ static int sfp_sm_probe_for_phy(struct sfp *sfp)
 		break;
 
 	case MDIO_I2C_MARVELL_C22:
-		err = sfp_sm_probe_phy(sfp, false);
+		err = sfp_sm_probe_phy(sfp, SFP_PHY_ADDR, false);
 		break;
 
 	case MDIO_I2C_C45:
-		err = sfp_sm_probe_phy(sfp, true);
+		err = sfp_sm_probe_phy(sfp, SFP_PHY_ADDR, true);
 		break;
 
 	case MDIO_I2C_ROLLBALL:
-		err = -EOPNOTSUPP;
+		err = sfp_sm_probe_phy(sfp, SFP_PHY_ADDR_ROLLBALL, true);
 		break;
 	}
 
@@ -2049,6 +2076,7 @@ static int sfp_sm_mod_probe(struct sfp *sfp, bool report)
 		sfp->state_hw_mask |= SFP_F_LOS;
 
 	sfp->module_t_start_up = T_START_UP;
+	sfp->module_t_wait = T_WAIT;
 
 	sfp->tx_fault_ignore = false;
 
@@ -2263,9 +2291,10 @@ static void sfp_sm_main(struct sfp *sfp, unsigned int event)
 
 		/* We need to check the TX_FAULT state, which is not defined
 		 * while TX_DISABLE is asserted. The earliest we want to do
-		 * anything (such as probe for a PHY) is 50ms.
+		 * anything (such as probe for a PHY) is 50ms (or more on
+		 * specific modules).
 		 */
-		sfp_sm_next(sfp, SFP_S_WAIT, T_WAIT);
+		sfp_sm_next(sfp, SFP_S_WAIT, sfp->module_t_wait);
 		break;
 
 	case SFP_S_WAIT:
@@ -2279,8 +2308,8 @@ static void sfp_sm_main(struct sfp *sfp, unsigned int event)
 			 * deasserting.
 			 */
 			timeout = sfp->module_t_start_up;
-			if (timeout > T_WAIT)
-				timeout -= T_WAIT;
+			if (timeout > sfp->module_t_wait)
+				timeout -= sfp->module_t_wait;
 			else
 				timeout = 1;