From 8be9cdc6911877843c4f13e44e836382818eb355 Mon Sep 17 00:00:00 2001 From: Wei Yongjun <weiyongjun1@huawei.com> Date: Sat, 26 Feb 2022 09:43:33 +0000 Subject: [PATCH 1/3] bus: imx-weim: make symbol 'weim_of_notifier' static The sparse tool complains as follows: drivers/bus/imx-weim.c:373:23: warning: symbol 'weim_of_notifier' was not declared. Should it be static? This symbol is not used outside of imx-weim.c, so marks it static. Fixes: e6cb5408289f ("bus: imx-weim: add DT overlay support for WEIM bus") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> --- drivers/bus/imx-weim.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/bus/imx-weim.c b/drivers/bus/imx-weim.c index 2ea0a51f79f65..828c66bbaa676 100644 --- a/drivers/bus/imx-weim.c +++ b/drivers/bus/imx-weim.c @@ -369,7 +369,7 @@ static int of_weim_notify(struct notifier_block *nb, unsigned long action, return ret; } -struct notifier_block weim_of_notifier = { +static struct notifier_block weim_of_notifier = { .notifier_call = of_weim_notify, }; #endif /* IS_ENABLED(CONFIG_OF_DYNAMIC) */ From 45974e4276a8d6653394f66666fc57d8ffa6de9a Mon Sep 17 00:00:00 2001 From: Max Krummenacher <max.krummenacher@toradex.com> Date: Thu, 14 Apr 2022 10:50:54 +0200 Subject: [PATCH 2/3] ARM: dts: imx6ull-colibri: fix vqmmc regulator The correct spelling for the property is gpios. Otherwise, the regulator will neither reserve nor control any GPIOs. Thus, any SD/MMC card which can use UHS-I modes will fail. Fixes: c2e4987e0e02 ("ARM: dts: imx6ull: add Toradex Colibri iMX6ULL support") Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Denys Drozdov <denys.drozdov@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> --- arch/arm/boot/dts/imx6ull-colibri.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/imx6ull-colibri.dtsi b/arch/arm/boot/dts/imx6ull-colibri.dtsi index 7f35a06dff95b..951a2a6c5a657 100644 --- a/arch/arm/boot/dts/imx6ull-colibri.dtsi +++ b/arch/arm/boot/dts/imx6ull-colibri.dtsi @@ -37,7 +37,7 @@ reg_sd1_vmmc: regulator-sd1-vmmc { compatible = "regulator-gpio"; - gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>; + gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_snvs_reg_sd>; regulator-always-on; From 0310b5aa0656a94102344f1e9ae2892e342a665d Mon Sep 17 00:00:00 2001 From: Fabio Estevam <festevam@denx.de> Date: Mon, 18 Apr 2022 14:47:31 -0300 Subject: [PATCH 3/3] arm64: dts: imx8mn-ddr4-evk: Describe the 32.768 kHz PMIC clock The ROHM BD71847 PMIC has a 32.768 kHz clock. Describe the PMIC clock to fix the following boot errors: bd718xx-clk bd71847-clk.1.auto: No parent clk found bd718xx-clk: probe of bd71847-clk.1.auto failed with error -22 Based on the same fix done for imx8mm-evk as per commit a6a355ede574 ("arm64: dts: imx8mm-evk: Add 32.768 kHz clock to PMIC") Fixes: 3e44dd09736d ("arm64: dts: imx8mn-ddr4-evk: Add rohm,bd71847 PMIC support") Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org> --- arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts index 7dfee715a2c4d..d8ce217c60166 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts @@ -59,6 +59,10 @@ interrupts = <3 IRQ_TYPE_LEVEL_LOW>; rohm,reset-snvs-powered; + #clock-cells = <0>; + clocks = <&osc_32k 0>; + clock-output-names = "clk-32k-out"; + regulators { buck1_reg: BUCK1 { regulator-name = "buck1";