From fc6c391a7acf410b21c161764a48e5a6cc01c474 Mon Sep 17 00:00:00 2001 From: Yishai Hadas Date: Sun, 13 May 2018 13:21:40 +0300 Subject: [PATCH 01/15] net/mlx5: Prevent warns in dmesg upon firmware commands When DEVX is used application builds by itself the command mail box, this patch prevents warns upon firmware commands as of invalid user space usage. In addition, A failure in destroy_mkey command was changed to be printed only under debug mode. This prevents a redundant warn when a memory window was used with rereg_mr and finally was some kernel cleanup as of reset flow/process termination. In that case this command might temporarily fails as part of the cleanup but finally it expects to succeed. Signed-off-by: Yishai Hadas Signed-off-by: Leon Romanovsky --- drivers/net/ethernet/mellanox/mlx5/core/cmd.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c index 487388aed98f2..b99d6df3905b3 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c @@ -677,7 +677,7 @@ struct mlx5_ifc_mbox_out_bits { struct mlx5_ifc_mbox_in_bits { u8 opcode[0x10]; - u8 reserved_at_10[0x10]; + u8 uid[0x10]; u8 reserved_at_20[0x10]; u8 op_mod[0x10]; @@ -697,6 +697,7 @@ static int mlx5_cmd_check(struct mlx5_core_dev *dev, void *in, void *out) u8 status; u16 opcode; u16 op_mod; + u16 uid; mlx5_cmd_mbox_status(out, &status, &syndrome); if (!status) @@ -704,8 +705,18 @@ static int mlx5_cmd_check(struct mlx5_core_dev *dev, void *in, void *out) opcode = MLX5_GET(mbox_in, in, opcode); op_mod = MLX5_GET(mbox_in, in, op_mod); + uid = MLX5_GET(mbox_in, in, uid); - mlx5_core_err(dev, + if (!uid && opcode != MLX5_CMD_OP_DESTROY_MKEY) + mlx5_core_err(dev, + "%s(0x%x) op_mod(0x%x) failed, status %s(0x%x), syndrome (0x%x)\n", + mlx5_command_str(opcode), + opcode, op_mod, + cmd_status_str(status), + status, + syndrome); + else + mlx5_core_dbg(dev, "%s(0x%x) op_mod(0x%x) failed, status %s(0x%x), syndrome (0x%x)\n", mlx5_command_str(opcode), opcode, op_mod, From 38b7ca927d6a12bf4466be22a90b7d998f5ae69a Mon Sep 17 00:00:00 2001 From: Yishai Hadas Date: Thu, 8 Mar 2018 14:36:27 +0200 Subject: [PATCH 02/15] net/mlx5: Expose DEVX specification This patch updates the mlx5_ifc structures and command interface to support DEVX. Signed-off-by: Yishai Hadas Signed-off-by: Leon Romanovsky --- drivers/net/ethernet/mellanox/mlx5/core/cmd.c | 4 ++ include/linux/mlx5/device.h | 3 + include/linux/mlx5/mlx5_ifc.h | 67 ++++++++++++++++++- 3 files changed, 73 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c index b99d6df3905b3..d07f24de8fa34 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c @@ -310,6 +310,7 @@ static int mlx5_internal_err_ret_value(struct mlx5_core_dev *dev, u16 op, case MLX5_CMD_OP_DEALLOC_ENCAP_HEADER: case MLX5_CMD_OP_DEALLOC_MODIFY_HEADER_CONTEXT: case MLX5_CMD_OP_FPGA_DESTROY_QP: + case MLX5_CMD_OP_DESTROY_GENERAL_OBJECT: return MLX5_CMD_STAT_OK; case MLX5_CMD_OP_QUERY_HCA_CAP: @@ -427,6 +428,7 @@ static int mlx5_internal_err_ret_value(struct mlx5_core_dev *dev, u16 op, case MLX5_CMD_OP_FPGA_MODIFY_QP: case MLX5_CMD_OP_FPGA_QUERY_QP: case MLX5_CMD_OP_FPGA_QUERY_QP_COUNTERS: + case MLX5_CMD_OP_CREATE_GENERAL_OBJECT: *status = MLX5_DRIVER_STATUS_ABORTED; *synd = MLX5_DRIVER_SYND; return -EIO; @@ -599,6 +601,8 @@ const char *mlx5_command_str(int command) MLX5_COMMAND_STR_CASE(FPGA_QUERY_QP); MLX5_COMMAND_STR_CASE(FPGA_QUERY_QP_COUNTERS); MLX5_COMMAND_STR_CASE(FPGA_DESTROY_QP); + MLX5_COMMAND_STR_CASE(CREATE_GENERAL_OBJECT); + MLX5_COMMAND_STR_CASE(DESTROY_GENERAL_OBJECT); default: return "unknown command opcode"; } } diff --git a/include/linux/mlx5/device.h b/include/linux/mlx5/device.h index 02f72ebf31a78..f8671c0a43aaa 100644 --- a/include/linux/mlx5/device.h +++ b/include/linux/mlx5/device.h @@ -1071,6 +1071,9 @@ enum mlx5_qcam_feature_groups { #define MLX5_CAP_GEN(mdev, cap) \ MLX5_GET(cmd_hca_cap, mdev->caps.hca_cur[MLX5_CAP_GENERAL], cap) +#define MLX5_CAP_GEN_64(mdev, cap) \ + MLX5_GET64(cmd_hca_cap, mdev->caps.hca_cur[MLX5_CAP_GENERAL], cap) + #define MLX5_CAP_GEN_MAX(mdev, cap) \ MLX5_GET(cmd_hca_cap, mdev->caps.hca_max[MLX5_CAP_GENERAL], cap) diff --git a/include/linux/mlx5/mlx5_ifc.h b/include/linux/mlx5/mlx5_ifc.h index 27134c4fcb76e..f810772e80c0f 100644 --- a/include/linux/mlx5/mlx5_ifc.h +++ b/include/linux/mlx5/mlx5_ifc.h @@ -75,6 +75,15 @@ enum { MLX5_SET_HCA_CAP_OP_MOD_ATOMIC = 0x3, }; +enum { + MLX5_GENERAL_OBJ_TYPES_CAP_UCTX = (1ULL << 4), + MLX5_GENERAL_OBJ_TYPES_CAP_UMEM = (1ULL << 5), +}; + +enum { + MLX5_OBJ_TYPE_UCTX = 0x0004, +}; + enum { MLX5_CMD_OP_QUERY_HCA_CAP = 0x100, MLX5_CMD_OP_QUERY_ADAPTER = 0x101, @@ -242,6 +251,8 @@ enum { MLX5_CMD_OP_FPGA_QUERY_QP = 0x962, MLX5_CMD_OP_FPGA_DESTROY_QP = 0x963, MLX5_CMD_OP_FPGA_QUERY_QP_COUNTERS = 0x964, + MLX5_CMD_OP_CREATE_GENERAL_OBJECT = 0xa00, + MLX5_CMD_OP_DESTROY_GENERAL_OBJECT = 0xa03, MLX5_CMD_OP_MAX }; @@ -1113,7 +1124,9 @@ struct mlx5_ifc_cmd_hca_cap_bits { u8 reserved_at_3f8[0x3]; u8 log_max_current_uc_list[0x5]; - u8 reserved_at_400[0x80]; + u8 general_obj_types[0x40]; + + u8 reserved_at_440[0x40]; u8 reserved_at_480[0x3]; u8 log_max_l2_table[0x5]; @@ -9115,4 +9128,56 @@ struct mlx5_ifc_dealloc_memic_out_bits { u8 reserved_at_40[0x40]; }; +struct mlx5_ifc_general_obj_in_cmd_hdr_bits { + u8 opcode[0x10]; + u8 uid[0x10]; + + u8 reserved_at_20[0x10]; + u8 obj_type[0x10]; + + u8 obj_id[0x20]; + + u8 reserved_at_60[0x20]; +}; + +struct mlx5_ifc_general_obj_out_cmd_hdr_bits { + u8 status[0x8]; + u8 reserved_at_8[0x18]; + + u8 syndrome[0x20]; + + u8 obj_id[0x20]; + + u8 reserved_at_60[0x20]; +}; + +struct mlx5_ifc_umem_bits { + u8 modify_field_select[0x40]; + + u8 reserved_at_40[0x5b]; + u8 log_page_size[0x5]; + + u8 page_offset[0x20]; + + u8 num_of_mtt[0x40]; + + struct mlx5_ifc_mtt_bits mtt[0]; +}; + +struct mlx5_ifc_uctx_bits { + u8 modify_field_select[0x40]; + + u8 reserved_at_40[0x1c0]; +}; + +struct mlx5_ifc_create_umem_in_bits { + struct mlx5_ifc_general_obj_in_cmd_hdr_bits hdr; + struct mlx5_ifc_umem_bits umem; +}; + +struct mlx5_ifc_create_uctx_in_bits { + struct mlx5_ifc_general_obj_in_cmd_hdr_bits hdr; + struct mlx5_ifc_uctx_bits uctx; +}; + #endif /* MLX5_IFC_H */ From 0af5107cd0640ee3424e337b492e4b11b450ce28 Mon Sep 17 00:00:00 2001 From: Talat Batheesh Date: Thu, 17 May 2018 11:14:18 +0300 Subject: [PATCH 03/15] net/mlx5: Add RoCE RX ICRC encapsulated counter Add capability bit in PCAM register and RoCE ICRC error counter to PPCNT register. Signed-off-by: Talat Batheesh Reviewed-by: Mark Bloch Signed-off-by: Leon Romanovsky --- include/linux/mlx5/mlx5_ifc.h | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/include/linux/mlx5/mlx5_ifc.h b/include/linux/mlx5/mlx5_ifc.h index f810772e80c0f..deb3a459a22e7 100644 --- a/include/linux/mlx5/mlx5_ifc.h +++ b/include/linux/mlx5/mlx5_ifc.h @@ -1681,7 +1681,11 @@ struct mlx5_ifc_eth_extended_cntrs_grp_data_layout_bits { u8 rx_buffer_full_low[0x20]; - u8 reserved_at_1c0[0x600]; + u8 rx_icrc_encapsulated_high[0x20]; + + u8 rx_icrc_encapsulated_low[0x20]; + + u8 reserved_at_200[0x5c0]; }; struct mlx5_ifc_eth_3635_cntrs_grp_data_layout_bits { @@ -8044,8 +8048,9 @@ struct mlx5_ifc_peir_reg_bits { }; struct mlx5_ifc_pcam_enhanced_features_bits { - u8 reserved_at_0[0x76]; - + u8 reserved_at_0[0x6d]; + u8 rx_icrc_encapsulated_counter[0x1]; + u8 reserved_at_6e[0x8]; u8 pfcc_mask[0x1]; u8 reserved_at_77[0x4]; u8 rx_buffer_fullness_counters[0x1]; From b30408d7a38356e4d6b4f913686b25401fae386c Mon Sep 17 00:00:00 2001 From: Leon Romanovsky Date: Sun, 24 Jun 2018 11:23:46 +0300 Subject: [PATCH 04/15] net/mlx5: Rate limit errors in command interface Any error status returned by FW will trigger a print similar to the following error message in the dmesg. [ 55.884355] mlx5_core 0000:00:04.0: mlx5_cmd_check:712:(pid 555): ALLOC_UAR(0x802) op_mod(0x0) failed, status limits exceeded(0x8), syndrome (0x0) Those prints are extremely valuable to diagnose issues with running system and it is important to keep them. However, not-so-careful user can trigger endless number of such prints by depleting HW resources and will spam dmesg. Rate limiting of such messages solves this issue. Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe --- drivers/net/ethernet/mellanox/mlx5/core/cmd.c | 11 ++++------- drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.h | 6 ++++++ 2 files changed, 10 insertions(+), 7 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c index d07f24de8fa34..3cb629e9f27c1 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c @@ -712,13 +712,10 @@ static int mlx5_cmd_check(struct mlx5_core_dev *dev, void *in, void *out) uid = MLX5_GET(mbox_in, in, uid); if (!uid && opcode != MLX5_CMD_OP_DESTROY_MKEY) - mlx5_core_err(dev, - "%s(0x%x) op_mod(0x%x) failed, status %s(0x%x), syndrome (0x%x)\n", - mlx5_command_str(opcode), - opcode, op_mod, - cmd_status_str(status), - status, - syndrome); + mlx5_core_err_rl(dev, + "%s(0x%x) op_mod(0x%x) failed, status %s(0x%x), syndrome (0x%x)\n", + mlx5_command_str(opcode), opcode, op_mod, + cmd_status_str(status), status, syndrome); else mlx5_core_dbg(dev, "%s(0x%x) op_mod(0x%x) failed, status %s(0x%x), syndrome (0x%x)\n", diff --git a/drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.h b/drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.h index 023882d9a22e5..49955117ae365 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.h @@ -66,6 +66,12 @@ do { \ __func__, __LINE__, current->pid, \ ##__VA_ARGS__) +#define mlx5_core_err_rl(__dev, format, ...) \ + dev_err_ratelimited(&(__dev)->pdev->dev, \ + "%s:%d:(pid %d): " format, \ + __func__, __LINE__, current->pid, \ + ##__VA_ARGS__) + #define mlx5_core_warn(__dev, format, ...) \ dev_warn(&(__dev)->pdev->dev, "%s:%d:(pid %d): " format, \ __func__, __LINE__, current->pid, \ From 4d4fb5dc988a36307711be292bde6e39b8bdbceb Mon Sep 17 00:00:00 2001 From: Yonatan Cohen Date: Tue, 19 Jun 2018 08:47:22 +0300 Subject: [PATCH 05/15] net/mlx5: Limit scope of dump_fill_mkey function mlx5_core_dump_fill_mkey() is going to be used in next patch in IB and doesn't need to be visible to whole mlx5_core. Move that command to mlx5_ib. Signed-off-by: Yonatan Cohen Signed-off-by: Leon Romanovsky --- drivers/infiniband/hw/mlx5/cmd.c | 15 +++++++++++++++ drivers/infiniband/hw/mlx5/cmd.h | 1 + drivers/net/ethernet/mellanox/mlx5/core/mr.c | 17 ----------------- include/linux/mlx5/driver.h | 2 -- 4 files changed, 16 insertions(+), 19 deletions(-) diff --git a/drivers/infiniband/hw/mlx5/cmd.c b/drivers/infiniband/hw/mlx5/cmd.c index 188512bf46e63..ccc0b5d06a7df 100644 --- a/drivers/infiniband/hw/mlx5/cmd.c +++ b/drivers/infiniband/hw/mlx5/cmd.c @@ -32,6 +32,21 @@ #include "cmd.h" +int mlx5_cmd_dump_fill_mkey(struct mlx5_core_dev *dev, u32 *mkey) +{ + u32 out[MLX5_ST_SZ_DW(query_special_contexts_out)] = {0}; + u32 in[MLX5_ST_SZ_DW(query_special_contexts_in)] = {0}; + int err; + + MLX5_SET(query_special_contexts_in, in, opcode, + MLX5_CMD_OP_QUERY_SPECIAL_CONTEXTS); + err = mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out)); + if (!err) + *mkey = MLX5_GET(query_special_contexts_out, out, + dump_fill_mkey); + return err; +} + int mlx5_cmd_null_mkey(struct mlx5_core_dev *dev, u32 *null_mkey) { u32 out[MLX5_ST_SZ_DW(query_special_contexts_out)] = {}; diff --git a/drivers/infiniband/hw/mlx5/cmd.h b/drivers/infiniband/hw/mlx5/cmd.h index e7206c8a8011b..98ea4648c655a 100644 --- a/drivers/infiniband/hw/mlx5/cmd.h +++ b/drivers/infiniband/hw/mlx5/cmd.h @@ -37,6 +37,7 @@ #include #include +int mlx5_cmd_dump_fill_mkey(struct mlx5_core_dev *dev, u32 *mkey); int mlx5_cmd_null_mkey(struct mlx5_core_dev *dev, u32 *null_mkey); int mlx5_cmd_query_cong_params(struct mlx5_core_dev *dev, int cong_point, void *out, int out_size); diff --git a/drivers/net/ethernet/mellanox/mlx5/core/mr.c b/drivers/net/ethernet/mellanox/mlx5/core/mr.c index f4f02f775c938..0670165afd5fd 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/mr.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/mr.c @@ -146,23 +146,6 @@ int mlx5_core_query_mkey(struct mlx5_core_dev *dev, struct mlx5_core_mkey *mkey, } EXPORT_SYMBOL(mlx5_core_query_mkey); -int mlx5_core_dump_fill_mkey(struct mlx5_core_dev *dev, struct mlx5_core_mkey *_mkey, - u32 *mkey) -{ - u32 out[MLX5_ST_SZ_DW(query_special_contexts_out)] = {0}; - u32 in[MLX5_ST_SZ_DW(query_special_contexts_in)] = {0}; - int err; - - MLX5_SET(query_special_contexts_in, in, opcode, - MLX5_CMD_OP_QUERY_SPECIAL_CONTEXTS); - err = mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out)); - if (!err) - *mkey = MLX5_GET(query_special_contexts_out, out, - dump_fill_mkey); - return err; -} -EXPORT_SYMBOL(mlx5_core_dump_fill_mkey); - static inline u32 mlx5_get_psv(u32 *out, int psv_index) { switch (psv_index) { diff --git a/include/linux/mlx5/driver.h b/include/linux/mlx5/driver.h index 80cbb7fdce4a1..1cb1c0317b778 100644 --- a/include/linux/mlx5/driver.h +++ b/include/linux/mlx5/driver.h @@ -1067,8 +1067,6 @@ int mlx5_core_destroy_mkey(struct mlx5_core_dev *dev, struct mlx5_core_mkey *mkey); int mlx5_core_query_mkey(struct mlx5_core_dev *dev, struct mlx5_core_mkey *mkey, u32 *out, int outlen); -int mlx5_core_dump_fill_mkey(struct mlx5_core_dev *dev, struct mlx5_core_mkey *_mkey, - u32 *mkey); int mlx5_core_alloc_pd(struct mlx5_core_dev *dev, u32 *pdn); int mlx5_core_dealloc_pd(struct mlx5_core_dev *dev, u32 pdn); int mlx5_core_mad_ifc(struct mlx5_core_dev *dev, const void *inb, void *outb, From b183ee27f5fb07c8428e2fe45d5f35dac611c45d Mon Sep 17 00:00:00 2001 From: Leon Romanovsky Date: Tue, 19 Jun 2018 08:47:23 +0300 Subject: [PATCH 06/15] net/mlx5: Add hardware definitions for dump_fill_mkey MLX5 IB HCA offers the memory key, dump_fill_mkey to boost performance by forcing local HCA operations to skip the PCI bus access, This patch adds needed hardware definitions. Signed-off-by: Leon Romanovsky --- include/linux/mlx5/mlx5_ifc.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/include/linux/mlx5/mlx5_ifc.h b/include/linux/mlx5/mlx5_ifc.h index deb3a459a22e7..1853e7fd6924a 100644 --- a/include/linux/mlx5/mlx5_ifc.h +++ b/include/linux/mlx5/mlx5_ifc.h @@ -885,7 +885,9 @@ struct mlx5_ifc_cmd_hca_cap_bits { u8 log_max_eq_sz[0x8]; u8 reserved_at_e8[0x2]; u8 log_max_mkey[0x6]; - u8 reserved_at_f0[0xc]; + u8 reserved_at_f0[0x8]; + u8 dump_fill_mkey[0x1]; + u8 reserved_at_f9[0x3]; u8 log_max_eq[0x4]; u8 max_indirection[0x8]; From 31e33a5b41bb158f27c30e13b12d6e5e6513ea05 Mon Sep 17 00:00:00 2001 From: Jann Horn Date: Fri, 6 Jul 2018 22:18:09 +0200 Subject: [PATCH 07/15] net/mlx5: fix uaccess beyond "count" in debugfs read/write handlers In general, accessing userspace memory beyond the length of the supplied buffer in VFS read/write handlers can lead to both kernel memory corruption (via kernel_read()/kernel_write(), which can e.g. be triggered via sys_splice()) and privilege escalation inside userspace. In this case, the affected files are in debugfs (and should therefore only be accessible to root) and check that *pos is zero (which prevents the sys_splice() trick). Therefore, this is not a security fix, but rather a small cleanup. For the read handlers, fix it by using simple_read_from_buffer() instead of custom logic. For the write handler, add a check. changed in v2: - also fix dbg_write() Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Jann Horn Reviewed-by: Leon Romanovsky Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/cmd.c | 28 +++++-------------- .../net/ethernet/mellanox/mlx5/core/debugfs.c | 22 ++------------- 2 files changed, 9 insertions(+), 41 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c index 3cb629e9f27c1..a94955302482d 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c @@ -1032,7 +1032,10 @@ static ssize_t dbg_write(struct file *filp, const char __user *buf, if (!dbg->in_msg || !dbg->out_msg) return -ENOMEM; - if (copy_from_user(lbuf, buf, sizeof(lbuf))) + if (count < sizeof(lbuf) - 1) + return -EINVAL; + + if (copy_from_user(lbuf, buf, sizeof(lbuf) - 1)) return -EFAULT; lbuf[sizeof(lbuf) - 1] = 0; @@ -1236,21 +1239,12 @@ static ssize_t data_read(struct file *filp, char __user *buf, size_t count, { struct mlx5_core_dev *dev = filp->private_data; struct mlx5_cmd_debug *dbg = &dev->cmd.dbg; - int copy; - - if (*pos) - return 0; if (!dbg->out_msg) return -ENOMEM; - copy = min_t(int, count, dbg->outlen); - if (copy_to_user(buf, dbg->out_msg, copy)) - return -EFAULT; - - *pos += copy; - - return copy; + return simple_read_from_buffer(buf, count, pos, dbg->out_msg, + dbg->outlen); } static const struct file_operations dfops = { @@ -1268,19 +1262,11 @@ static ssize_t outlen_read(struct file *filp, char __user *buf, size_t count, char outlen[8]; int err; - if (*pos) - return 0; - err = snprintf(outlen, sizeof(outlen), "%d", dbg->outlen); if (err < 0) return err; - if (copy_to_user(buf, &outlen, err)) - return -EFAULT; - - *pos += err; - - return err; + return simple_read_from_buffer(buf, count, pos, outlen, err); } static ssize_t outlen_write(struct file *filp, const char __user *buf, diff --git a/drivers/net/ethernet/mellanox/mlx5/core/debugfs.c b/drivers/net/ethernet/mellanox/mlx5/core/debugfs.c index 413080a312a7f..90fabd612b6cd 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/debugfs.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/debugfs.c @@ -150,22 +150,13 @@ static ssize_t average_read(struct file *filp, char __user *buf, size_t count, int ret; char tbuf[22]; - if (*pos) - return 0; - stats = filp->private_data; spin_lock_irq(&stats->lock); if (stats->n) field = div64_u64(stats->sum, stats->n); spin_unlock_irq(&stats->lock); ret = snprintf(tbuf, sizeof(tbuf), "%llu\n", field); - if (ret > 0) { - if (copy_to_user(buf, tbuf, ret)) - return -EFAULT; - } - - *pos += ret; - return ret; + return simple_read_from_buffer(buf, count, pos, tbuf, ret); } static ssize_t average_write(struct file *filp, const char __user *buf, @@ -442,9 +433,6 @@ static ssize_t dbg_read(struct file *filp, char __user *buf, size_t count, u64 field; int ret; - if (*pos) - return 0; - desc = filp->private_data; d = (void *)(desc - desc->i) - sizeof(*d); switch (d->type) { @@ -470,13 +458,7 @@ static ssize_t dbg_read(struct file *filp, char __user *buf, size_t count, else ret = snprintf(tbuf, sizeof(tbuf), "0x%llx\n", field); - if (ret > 0) { - if (copy_to_user(buf, tbuf, ret)) - return -EFAULT; - } - - *pos += ret; - return ret; + return simple_read_from_buffer(buf, count, pos, tbuf, ret); } static const struct file_operations fops = { From eff8ea8f24eac76bc21c25e4ca4ac4ee2dade846 Mon Sep 17 00:00:00 2001 From: Feras Daoud Date: Mon, 16 Jul 2018 18:35:30 -0700 Subject: [PATCH 08/15] net/mlx5: FW tracer, add hardware structures This change adds the infrastructure to mlx5 core fw tracer. It introduces the following 4 new registers: MLX5_REG_MTRC_CAP - Used to read tracer capabilities MLX5_REG_MTRC_CONF - Used to set tracer configurations MLX5_REG_MTRC_STDB - Used to query tracer strings database MLX5_REG_MTRC_CTRL - Used to control the tracer The capability of the tracing can be checked using mcam access register, therefore, the mcam access register interface will expose the tracer register. Signed-off-by: Feras Daoud Signed-off-by: Saeed Mahameed --- include/linux/mlx5/driver.h | 4 +++ include/linux/mlx5/mlx5_ifc.h | 61 ++++++++++++++++++++++++++++++++++- 2 files changed, 64 insertions(+), 1 deletion(-) diff --git a/include/linux/mlx5/driver.h b/include/linux/mlx5/driver.h index 1cb1c0317b778..4a4125b4279d4 100644 --- a/include/linux/mlx5/driver.h +++ b/include/linux/mlx5/driver.h @@ -138,6 +138,10 @@ enum { MLX5_REG_HOST_ENDIANNESS = 0x7004, MLX5_REG_MCIA = 0x9014, MLX5_REG_MLCR = 0x902b, + MLX5_REG_MTRC_CAP = 0x9040, + MLX5_REG_MTRC_CONF = 0x9041, + MLX5_REG_MTRC_STDB = 0x9042, + MLX5_REG_MTRC_CTRL = 0x9043, MLX5_REG_MPCNT = 0x9051, MLX5_REG_MTPPS = 0x9053, MLX5_REG_MTPPSE = 0x9054, diff --git a/include/linux/mlx5/mlx5_ifc.h b/include/linux/mlx5/mlx5_ifc.h index 1853e7fd6924a..bd7b71f54d590 100644 --- a/include/linux/mlx5/mlx5_ifc.h +++ b/include/linux/mlx5/mlx5_ifc.h @@ -8112,7 +8112,9 @@ struct mlx5_ifc_mcam_access_reg_bits { u8 mcqi[0x1]; u8 reserved_at_1f[0x1]; - u8 regs_95_to_64[0x20]; + u8 regs_95_to_68[0x1c]; + u8 tracer_registers[0x4]; + u8 regs_63_to_32[0x20]; u8 regs_31_to_0[0x20]; }; @@ -9187,4 +9189,61 @@ struct mlx5_ifc_create_uctx_in_bits { struct mlx5_ifc_uctx_bits uctx; }; +struct mlx5_ifc_mtrc_string_db_param_bits { + u8 string_db_base_address[0x20]; + + u8 reserved_at_20[0x8]; + u8 string_db_size[0x18]; +}; + +struct mlx5_ifc_mtrc_cap_bits { + u8 trace_owner[0x1]; + u8 trace_to_memory[0x1]; + u8 reserved_at_2[0x4]; + u8 trc_ver[0x2]; + u8 reserved_at_8[0x14]; + u8 num_string_db[0x4]; + + u8 first_string_trace[0x8]; + u8 num_string_trace[0x8]; + u8 reserved_at_30[0x28]; + + u8 log_max_trace_buffer_size[0x8]; + + u8 reserved_at_60[0x20]; + + struct mlx5_ifc_mtrc_string_db_param_bits string_db_param[8]; + + u8 reserved_at_280[0x180]; +}; + +struct mlx5_ifc_mtrc_conf_bits { + u8 reserved_at_0[0x1c]; + u8 trace_mode[0x4]; + u8 reserved_at_20[0x18]; + u8 log_trace_buffer_size[0x8]; + u8 trace_mkey[0x20]; + u8 reserved_at_60[0x3a0]; +}; + +struct mlx5_ifc_mtrc_stdb_bits { + u8 string_db_index[0x4]; + u8 reserved_at_4[0x4]; + u8 read_size[0x18]; + u8 start_offset[0x20]; + u8 string_db_data[0]; +}; + +struct mlx5_ifc_mtrc_ctrl_bits { + u8 trace_status[0x2]; + u8 reserved_at_2[0x2]; + u8 arm_event[0x1]; + u8 reserved_at_5[0xb]; + u8 modify_field_select[0x10]; + u8 reserved_at_20[0x2b]; + u8 current_timestamp52_32[0x15]; + u8 current_timestamp31_0[0x20]; + u8 reserved_at_80[0x180]; +}; + #endif /* MLX5_IFC_H */ From 5e022dd353b74132bf216a77b169c43e39f5be9e Mon Sep 17 00:00:00 2001 From: Eran Ben Elisha Date: Mon, 16 Jul 2018 18:35:31 -0700 Subject: [PATCH 09/15] net/mlx5: Expose MPEGC (Management PCIe General Configuration) structures This patch exposes PRM layout for handling MPEGC (Management PCIe General Configuration). This will be used in the downstream patch for configuring MPEGC via the driver. Signed-off-by: Eran Ben Elisha Reviewed-by: Moshe Shemesh Signed-off-by: Saeed Mahameed --- include/linux/mlx5/driver.h | 1 + include/linux/mlx5/mlx5_ifc.h | 23 +++++++++++++++++++++-- 2 files changed, 22 insertions(+), 2 deletions(-) diff --git a/include/linux/mlx5/driver.h b/include/linux/mlx5/driver.h index 4a4125b4279d4..957199c20a0fe 100644 --- a/include/linux/mlx5/driver.h +++ b/include/linux/mlx5/driver.h @@ -145,6 +145,7 @@ enum { MLX5_REG_MPCNT = 0x9051, MLX5_REG_MTPPS = 0x9053, MLX5_REG_MTPPSE = 0x9054, + MLX5_REG_MPEGC = 0x9056, MLX5_REG_MCQI = 0x9061, MLX5_REG_MCC = 0x9062, MLX5_REG_MCDA = 0x9063, diff --git a/include/linux/mlx5/mlx5_ifc.h b/include/linux/mlx5/mlx5_ifc.h index bd7b71f54d590..2de5feaeb74a2 100644 --- a/include/linux/mlx5/mlx5_ifc.h +++ b/include/linux/mlx5/mlx5_ifc.h @@ -8049,6 +8049,19 @@ struct mlx5_ifc_peir_reg_bits { u8 error_type[0x8]; }; +struct mlx5_ifc_mpegc_reg_bits { + u8 reserved_at_0[0x30]; + u8 field_select[0x10]; + + u8 tx_overflow_sense[0x1]; + u8 mark_cqe[0x1]; + u8 mark_cnp[0x1]; + u8 reserved_at_43[0x1b]; + u8 tx_lossy_overflow_oper[0x2]; + + u8 reserved_at_60[0x100]; +}; + struct mlx5_ifc_pcam_enhanced_features_bits { u8 reserved_at_0[0x6d]; u8 rx_icrc_encapsulated_counter[0x1]; @@ -8097,7 +8110,11 @@ struct mlx5_ifc_pcam_reg_bits { }; struct mlx5_ifc_mcam_enhanced_features_bits { - u8 reserved_at_0[0x7b]; + u8 reserved_at_0[0x74]; + u8 mark_tx_action_cnp[0x1]; + u8 mark_tx_action_cqe[0x1]; + u8 dynamic_tx_overflow[0x1]; + u8 reserved_at_77[0x4]; u8 pcie_outbound_stalled[0x1]; u8 tx_overflow_buffer_pkt[0x1]; u8 mtpps_enh_out_per_adj[0x1]; @@ -8112,7 +8129,9 @@ struct mlx5_ifc_mcam_access_reg_bits { u8 mcqi[0x1]; u8 reserved_at_1f[0x1]; - u8 regs_95_to_68[0x1c]; + u8 regs_95_to_87[0x9]; + u8 mpegc[0x1]; + u8 regs_85_to_68[0x12]; u8 tracer_registers[0x4]; u8 regs_63_to_32[0x20]; From 8da6fe2a18505b9bd977e573d62d33f836c6903c Mon Sep 17 00:00:00 2001 From: Jianbo Liu Date: Mon, 16 Jul 2018 18:35:32 -0700 Subject: [PATCH 10/15] net/mlx5: Add core support for double vlan push/pop steering action As newer firmware supports double push/pop in a single FTE, we add core bits and extend vlan action logic for it. Signed-off-by: Jianbo Liu Reviewed-by: Or Gerlitz Signed-off-by: Saeed Mahameed --- .../ethernet/mellanox/mlx5/core/diag/fs_tracepoint.h | 2 ++ .../ethernet/mellanox/mlx5/core/eswitch_offloads.c | 6 +++--- drivers/net/ethernet/mellanox/mlx5/core/fs_cmd.c | 12 +++++++++--- drivers/net/ethernet/mellanox/mlx5/core/fs_core.c | 4 +++- include/linux/mlx5/fs.h | 4 +++- include/linux/mlx5/mlx5_ifc.h | 11 +++++++++-- 6 files changed, 29 insertions(+), 10 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/diag/fs_tracepoint.h b/drivers/net/ethernet/mellanox/mlx5/core/diag/fs_tracepoint.h index 09f178a3fcabb..0240aee9189eb 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/diag/fs_tracepoint.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/diag/fs_tracepoint.h @@ -138,6 +138,8 @@ TRACE_EVENT(mlx5_fs_del_fg, {MLX5_FLOW_CONTEXT_ACTION_MOD_HDR, "MOD_HDR"},\ {MLX5_FLOW_CONTEXT_ACTION_VLAN_PUSH, "VLAN_PUSH"},\ {MLX5_FLOW_CONTEXT_ACTION_VLAN_POP, "VLAN_POP"},\ + {MLX5_FLOW_CONTEXT_ACTION_VLAN_PUSH_2, "VLAN_PUSH_2"},\ + {MLX5_FLOW_CONTEXT_ACTION_VLAN_POP_2, "VLAN_POP_2"},\ {MLX5_FLOW_CONTEXT_ACTION_FWD_NEXT_PRIO, "NEXT_PRIO"} TRACE_EVENT(mlx5_fs_set_fte, diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c index cecd201f0b73a..8f50ce80ff660 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c @@ -70,9 +70,9 @@ mlx5_eswitch_add_offloaded_rule(struct mlx5_eswitch *esw, flow_act.action &= ~(MLX5_FLOW_CONTEXT_ACTION_VLAN_PUSH | MLX5_FLOW_CONTEXT_ACTION_VLAN_POP); else if (flow_act.action & MLX5_FLOW_CONTEXT_ACTION_VLAN_PUSH) { - flow_act.vlan.ethtype = ntohs(attr->vlan_proto); - flow_act.vlan.vid = attr->vlan_vid; - flow_act.vlan.prio = attr->vlan_prio; + flow_act.vlan[0].ethtype = ntohs(attr->vlan_proto); + flow_act.vlan[0].vid = attr->vlan_vid; + flow_act.vlan[0].prio = attr->vlan_prio; } if (flow_act.action & MLX5_FLOW_CONTEXT_ACTION_FWD_DEST) { diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fs_cmd.c b/drivers/net/ethernet/mellanox/mlx5/core/fs_cmd.c index 5a00deff54576..6a62b84e57f4f 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/fs_cmd.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/fs_cmd.c @@ -349,9 +349,15 @@ static int mlx5_cmd_set_fte(struct mlx5_core_dev *dev, vlan = MLX5_ADDR_OF(flow_context, in_flow_context, push_vlan); - MLX5_SET(vlan, vlan, ethtype, fte->action.vlan.ethtype); - MLX5_SET(vlan, vlan, vid, fte->action.vlan.vid); - MLX5_SET(vlan, vlan, prio, fte->action.vlan.prio); + MLX5_SET(vlan, vlan, ethtype, fte->action.vlan[0].ethtype); + MLX5_SET(vlan, vlan, vid, fte->action.vlan[0].vid); + MLX5_SET(vlan, vlan, prio, fte->action.vlan[0].prio); + + vlan = MLX5_ADDR_OF(flow_context, in_flow_context, push_vlan_2); + + MLX5_SET(vlan, vlan, ethtype, fte->action.vlan[1].ethtype); + MLX5_SET(vlan, vlan, vid, fte->action.vlan[1].vid); + MLX5_SET(vlan, vlan, prio, fte->action.vlan[1].prio); in_match_value = MLX5_ADDR_OF(flow_context, in_flow_context, match_value); diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c index 49a75d31185ec..05e7a5112b74c 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c @@ -1464,7 +1464,9 @@ static bool check_conflicting_actions(u32 action1, u32 action2) MLX5_FLOW_CONTEXT_ACTION_DECAP | MLX5_FLOW_CONTEXT_ACTION_MOD_HDR | MLX5_FLOW_CONTEXT_ACTION_VLAN_POP | - MLX5_FLOW_CONTEXT_ACTION_VLAN_PUSH)) + MLX5_FLOW_CONTEXT_ACTION_VLAN_PUSH | + MLX5_FLOW_CONTEXT_ACTION_VLAN_POP_2 | + MLX5_FLOW_CONTEXT_ACTION_VLAN_PUSH_2)) return true; return false; diff --git a/include/linux/mlx5/fs.h b/include/linux/mlx5/fs.h index 757b4a30281e6..c40f2fc68655d 100644 --- a/include/linux/mlx5/fs.h +++ b/include/linux/mlx5/fs.h @@ -152,6 +152,8 @@ struct mlx5_fs_vlan { u8 prio; }; +#define MLX5_FS_VLAN_DEPTH 2 + struct mlx5_flow_act { u32 action; bool has_flow_tag; @@ -159,7 +161,7 @@ struct mlx5_flow_act { u32 encap_id; u32 modify_id; uintptr_t esp_id; - struct mlx5_fs_vlan vlan; + struct mlx5_fs_vlan vlan[MLX5_FS_VLAN_DEPTH]; struct ib_counters *counters; }; diff --git a/include/linux/mlx5/mlx5_ifc.h b/include/linux/mlx5/mlx5_ifc.h index 2de5feaeb74a2..ae12120ef0210 100644 --- a/include/linux/mlx5/mlx5_ifc.h +++ b/include/linux/mlx5/mlx5_ifc.h @@ -337,7 +337,10 @@ struct mlx5_ifc_flow_table_prop_layout_bits { u8 reserved_at_9[0x1]; u8 pop_vlan[0x1]; u8 push_vlan[0x1]; - u8 reserved_at_c[0x14]; + u8 reserved_at_c[0x1]; + u8 pop_vlan_2[0x1]; + u8 push_vlan_2[0x1]; + u8 reserved_at_f[0x11]; u8 reserved_at_20[0x2]; u8 log_max_ft_size[0x6]; @@ -2386,6 +2389,8 @@ enum { MLX5_FLOW_CONTEXT_ACTION_MOD_HDR = 0x40, MLX5_FLOW_CONTEXT_ACTION_VLAN_POP = 0x80, MLX5_FLOW_CONTEXT_ACTION_VLAN_PUSH = 0x100, + MLX5_FLOW_CONTEXT_ACTION_VLAN_POP_2 = 0x400, + MLX5_FLOW_CONTEXT_ACTION_VLAN_PUSH_2 = 0x800, }; struct mlx5_ifc_vlan_bits { @@ -2416,7 +2421,9 @@ struct mlx5_ifc_flow_context_bits { u8 modify_header_id[0x20]; - u8 reserved_at_100[0x100]; + struct mlx5_ifc_vlan_bits push_vlan_2; + + u8 reserved_at_120[0xe0]; struct mlx5_ifc_fte_match_param_bits match_value; From a451733909bcb78aeeecd3066a9411297b514a0f Mon Sep 17 00:00:00 2001 From: Max Gurtovoy Date: Mon, 16 Jul 2018 18:35:33 -0700 Subject: [PATCH 11/15] net/mlx5: Add XRQ commands definitions Update mlx5 command list and error return function to handle XRQ commands. Signed-off-by: Max Gurtovoy Reviewed-by: Daniel Jurgens Reviewed-by: Artemy Kovalyov Reviewed-by: Leon Romanovsky Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/cmd.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c index a94955302482d..10517b2a0643f 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c @@ -278,6 +278,7 @@ static int mlx5_internal_err_ret_value(struct mlx5_core_dev *dev, u16 op, case MLX5_CMD_OP_DESTROY_PSV: case MLX5_CMD_OP_DESTROY_SRQ: case MLX5_CMD_OP_DESTROY_XRC_SRQ: + case MLX5_CMD_OP_DESTROY_XRQ: case MLX5_CMD_OP_DESTROY_DCT: case MLX5_CMD_OP_DEALLOC_Q_COUNTER: case MLX5_CMD_OP_DESTROY_SCHEDULING_ELEMENT: @@ -347,6 +348,9 @@ static int mlx5_internal_err_ret_value(struct mlx5_core_dev *dev, u16 op, case MLX5_CMD_OP_CREATE_XRC_SRQ: case MLX5_CMD_OP_QUERY_XRC_SRQ: case MLX5_CMD_OP_ARM_XRC_SRQ: + case MLX5_CMD_OP_CREATE_XRQ: + case MLX5_CMD_OP_QUERY_XRQ: + case MLX5_CMD_OP_ARM_XRQ: case MLX5_CMD_OP_CREATE_DCT: case MLX5_CMD_OP_DRAIN_DCT: case MLX5_CMD_OP_QUERY_DCT: @@ -601,6 +605,10 @@ const char *mlx5_command_str(int command) MLX5_COMMAND_STR_CASE(FPGA_QUERY_QP); MLX5_COMMAND_STR_CASE(FPGA_QUERY_QP_COUNTERS); MLX5_COMMAND_STR_CASE(FPGA_DESTROY_QP); + MLX5_COMMAND_STR_CASE(CREATE_XRQ); + MLX5_COMMAND_STR_CASE(DESTROY_XRQ); + MLX5_COMMAND_STR_CASE(QUERY_XRQ); + MLX5_COMMAND_STR_CASE(ARM_XRQ); MLX5_COMMAND_STR_CASE(CREATE_GENERAL_OBJECT); MLX5_COMMAND_STR_CASE(DESTROY_GENERAL_OBJECT); default: return "unknown command opcode"; From 0f4039104ee61e14ac4771a2181c2a20572f4ec9 Mon Sep 17 00:00:00 2001 From: Noa Osherovich Date: Mon, 16 Jul 2018 18:35:34 -0700 Subject: [PATCH 12/15] net/mlx5: Add missing SET_DRIVER_VERSION command translation When translating command opcodes to a string, SET_DRIVER_VERSION command was missing. Fixes: 42ca502e179d0 ('net/mlx5_core: Use a macro in mlx5_command_str()') Signed-off-by: Noa Osherovich Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/cmd.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c index 10517b2a0643f..041c18faea46b 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c @@ -458,6 +458,7 @@ const char *mlx5_command_str(int command) MLX5_COMMAND_STR_CASE(SET_HCA_CAP); MLX5_COMMAND_STR_CASE(QUERY_ISSI); MLX5_COMMAND_STR_CASE(SET_ISSI); + MLX5_COMMAND_STR_CASE(SET_DRIVER_VERSION); MLX5_COMMAND_STR_CASE(CREATE_MKEY); MLX5_COMMAND_STR_CASE(QUERY_MKEY); MLX5_COMMAND_STR_CASE(DESTROY_MKEY); From d34c6efc59a0d714920100b2eba9565bfdcc438d Mon Sep 17 00:00:00 2001 From: Roi Dayan Date: Mon, 16 Jul 2018 18:35:35 -0700 Subject: [PATCH 13/15] net/mlx5: Use ERR_CAST() instead of coding it This makes it more readable that rule is being used to return an err. Signed-off-by: Roi Dayan Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/fs_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c index 05e7a5112b74c..29b86232f13ad 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c @@ -1825,7 +1825,7 @@ _mlx5_add_flow_rules(struct mlx5_flow_table *ft, g = alloc_auto_flow_group(ft, spec); if (IS_ERR(g)) { - rule = (void *)g; + rule = ERR_CAST(g); up_write_ref_node(&ft->node); return rule; } From e2abdcf1d2dd59d7164cf975c50e1587b96b9d04 Mon Sep 17 00:00:00 2001 From: Tariq Toukan Date: Mon, 16 Jul 2018 18:35:36 -0700 Subject: [PATCH 14/15] net/mlx5: Better return types for CQE API Reduce sizes of return types. Use bool for binary indication. Signed-off-by: Tariq Toukan Signed-off-by: Saeed Mahameed --- include/linux/mlx5/device.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/include/linux/mlx5/device.h b/include/linux/mlx5/device.h index f8671c0a43aaa..0566c6a94805e 100644 --- a/include/linux/mlx5/device.h +++ b/include/linux/mlx5/device.h @@ -750,7 +750,7 @@ enum { #define MLX5_MINI_CQE_ARRAY_SIZE 8 -static inline int mlx5_get_cqe_format(struct mlx5_cqe64 *cqe) +static inline u8 mlx5_get_cqe_format(struct mlx5_cqe64 *cqe) { return (cqe->op_own >> 2) & 0x3; } @@ -770,14 +770,14 @@ static inline u8 get_cqe_l3_hdr_type(struct mlx5_cqe64 *cqe) return (cqe->l4_l3_hdr_type >> 2) & 0x3; } -static inline u8 cqe_is_tunneled(struct mlx5_cqe64 *cqe) +static inline bool cqe_is_tunneled(struct mlx5_cqe64 *cqe) { return cqe->outer_l3_tunneled & 0x1; } -static inline int cqe_has_vlan(struct mlx5_cqe64 *cqe) +static inline bool cqe_has_vlan(struct mlx5_cqe64 *cqe) { - return !!(cqe->l4_l3_hdr_type & 0x1); + return cqe->l4_l3_hdr_type & 0x1; } static inline u64 get_cqe_ts(struct mlx5_cqe64 *cqe) From 048f31437ac5da336cf08e13f5fdc8add6a9bb16 Mon Sep 17 00:00:00 2001 From: Eran Ben Elisha Date: Mon, 16 Jul 2018 18:35:37 -0700 Subject: [PATCH 15/15] net/mlx5: Fix tristate and description for MLX5 module Current description did not include new devices. Fix that by proving the correct generic description. Signed-off-by: Eran Ben Elisha Signed-off-by: Saeed Mahameed --- drivers/infiniband/hw/mlx5/Kconfig | 2 +- drivers/net/ethernet/mellanox/mlx5/core/Kconfig | 6 +++--- drivers/net/ethernet/mellanox/mlx5/core/main.c | 2 +- 3 files changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/infiniband/hw/mlx5/Kconfig b/drivers/infiniband/hw/mlx5/Kconfig index fb4d77be019b7..0440966bc6ec3 100644 --- a/drivers/infiniband/hw/mlx5/Kconfig +++ b/drivers/infiniband/hw/mlx5/Kconfig @@ -1,5 +1,5 @@ config MLX5_INFINIBAND - tristate "Mellanox Connect-IB HCA support" + tristate "Mellanox 5th generation network adapters (ConnectX series) support" depends on NETDEVICES && ETHERNET && PCI && MLX5_CORE depends on INFINIBAND_USER_ACCESS || INFINIBAND_USER_ACCESS=n ---help--- diff --git a/drivers/net/ethernet/mellanox/mlx5/core/Kconfig b/drivers/net/ethernet/mellanox/mlx5/core/Kconfig index 2545296a0c087..7a84dd07ced25 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/Kconfig +++ b/drivers/net/ethernet/mellanox/mlx5/core/Kconfig @@ -3,7 +3,7 @@ # config MLX5_CORE - tristate "Mellanox Technologies ConnectX-4 and Connect-IB core driver" + tristate "Mellanox 5th generation network adapters (ConnectX series) core driver" depends on MAY_USE_DEVLINK depends on PCI imply PTP_1588_CLOCK @@ -27,7 +27,7 @@ config MLX5_FPGA sandbox-specific client drivers. config MLX5_CORE_EN - bool "Mellanox Technologies ConnectX-4 Ethernet support" + bool "Mellanox 5th generation network adapters (ConnectX series) Ethernet support" depends on NETDEVICES && ETHERNET && INET && PCI && MLX5_CORE depends on IPV6=y || IPV6=n || MLX5_CORE=m select PAGE_POOL @@ -69,7 +69,7 @@ config MLX5_CORE_EN_DCB If unsure, set to Y config MLX5_CORE_IPOIB - bool "Mellanox Technologies ConnectX-4 IPoIB offloads support" + bool "Mellanox 5th generation network adapters (connectX series) IPoIB offloads support" depends on MLX5_CORE_EN default n ---help--- diff --git a/drivers/net/ethernet/mellanox/mlx5/core/main.c b/drivers/net/ethernet/mellanox/mlx5/core/main.c index 615005e638195..f9b950e1bd85a 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c @@ -64,7 +64,7 @@ #include "lib/clock.h" MODULE_AUTHOR("Eli Cohen "); -MODULE_DESCRIPTION("Mellanox Connect-IB, ConnectX-4 core driver"); +MODULE_DESCRIPTION("Mellanox 5th generation network adapters (ConnectX series) core driver"); MODULE_LICENSE("Dual BSD/GPL"); MODULE_VERSION(DRIVER_VERSION);