From 787e7be0c9fb1202124dd3f2dea0d39738f91bee Mon Sep 17 00:00:00 2001 From: Aric Cyr Date: Tue, 10 Dec 2024 18:38:15 -0500 Subject: [PATCH] drm/amd/display: Optimize cursor position updates [why] Updating the cursor enablement register can be a slow operation and accumulates when high polling rate cursors cause frequent updates asynchronously to the cursor position. [how] Since the cursor enable bit is cached there is no need to update the enablement register if there is no change to it. This removes the read-modify-write from the cursor position programming path in HUBP and DPP, leaving only the register writes. Reviewed-by: Josip Pavic Signed-off-by: Aric Cyr Signed-off-by: Roman Li Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/dpp/dcn10/dcn10_dpp.c | 7 ++++--- .../gpu/drm/amd/display/dc/dpp/dcn401/dcn401_dpp_cm.c | 6 ++++-- drivers/gpu/drm/amd/display/dc/hubp/dcn20/dcn20_hubp.c | 8 +++++--- .../gpu/drm/amd/display/dc/hubp/dcn401/dcn401_hubp.c | 10 ++++++---- 4 files changed, 19 insertions(+), 12 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/dpp/dcn10/dcn10_dpp.c b/drivers/gpu/drm/amd/display/dc/dpp/dcn10/dcn10_dpp.c index e1da48b05d009..8f6529a98f31f 100644 --- a/drivers/gpu/drm/amd/display/dc/dpp/dcn10/dcn10_dpp.c +++ b/drivers/gpu/drm/amd/display/dc/dpp/dcn10/dcn10_dpp.c @@ -480,10 +480,11 @@ void dpp1_set_cursor_position( if (src_y_offset + cursor_height <= 0) cur_en = 0; /* not visible beyond top edge*/ - REG_UPDATE(CURSOR0_CONTROL, - CUR0_ENABLE, cur_en); + if (dpp_base->pos.cur0_ctl.bits.cur0_enable != cur_en) { + REG_UPDATE(CURSOR0_CONTROL, CUR0_ENABLE, cur_en); - dpp_base->pos.cur0_ctl.bits.cur0_enable = cur_en; + dpp_base->pos.cur0_ctl.bits.cur0_enable = cur_en; + } } void dpp1_cnv_set_optional_cursor_attributes( diff --git a/drivers/gpu/drm/amd/display/dc/dpp/dcn401/dcn401_dpp_cm.c b/drivers/gpu/drm/amd/display/dc/dpp/dcn401/dcn401_dpp_cm.c index 3b6ca7974e188..1236e0f9a2560 100644 --- a/drivers/gpu/drm/amd/display/dc/dpp/dcn401/dcn401_dpp_cm.c +++ b/drivers/gpu/drm/amd/display/dc/dpp/dcn401/dcn401_dpp_cm.c @@ -154,9 +154,11 @@ void dpp401_set_cursor_position( struct dcn401_dpp *dpp = TO_DCN401_DPP(dpp_base); uint32_t cur_en = pos->enable ? 1 : 0; - REG_UPDATE(CURSOR0_CONTROL, CUR0_ENABLE, cur_en); + if (dpp_base->pos.cur0_ctl.bits.cur0_enable != cur_en) { + REG_UPDATE(CURSOR0_CONTROL, CUR0_ENABLE, cur_en); - dpp_base->pos.cur0_ctl.bits.cur0_enable = cur_en; + dpp_base->pos.cur0_ctl.bits.cur0_enable = cur_en; + } } void dpp401_set_optional_cursor_attributes( diff --git a/drivers/gpu/drm/amd/display/dc/hubp/dcn20/dcn20_hubp.c b/drivers/gpu/drm/amd/display/dc/hubp/dcn20/dcn20_hubp.c index c74f6a3313a27..d537d0c53cf03 100644 --- a/drivers/gpu/drm/amd/display/dc/hubp/dcn20/dcn20_hubp.c +++ b/drivers/gpu/drm/amd/display/dc/hubp/dcn20/dcn20_hubp.c @@ -1058,11 +1058,13 @@ void hubp2_cursor_set_position( if (src_y_offset + cursor_height <= 0) cur_en = 0; /* not visible beyond top edge*/ - if (cur_en && REG_READ(CURSOR_SURFACE_ADDRESS) == 0) - hubp->funcs->set_cursor_attributes(hubp, &hubp->curs_attr); + if (hubp->pos.cur_ctl.bits.cur_enable != cur_en) { + if (cur_en && REG_READ(CURSOR_SURFACE_ADDRESS) == 0) + hubp->funcs->set_cursor_attributes(hubp, &hubp->curs_attr); - REG_UPDATE(CURSOR_CONTROL, + REG_UPDATE(CURSOR_CONTROL, CURSOR_ENABLE, cur_en); + } REG_SET_2(CURSOR_POSITION, 0, CURSOR_X_POSITION, pos->x, diff --git a/drivers/gpu/drm/amd/display/dc/hubp/dcn401/dcn401_hubp.c b/drivers/gpu/drm/amd/display/dc/hubp/dcn401/dcn401_hubp.c index d38e3f3a1107c..3595c74a3a2fb 100644 --- a/drivers/gpu/drm/amd/display/dc/hubp/dcn401/dcn401_hubp.c +++ b/drivers/gpu/drm/amd/display/dc/hubp/dcn401/dcn401_hubp.c @@ -730,11 +730,13 @@ void hubp401_cursor_set_position( dc_fixpt_from_int(dst_x_offset), param->h_scale_ratio)); - if (cur_en && REG_READ(CURSOR_SURFACE_ADDRESS) == 0) - hubp->funcs->set_cursor_attributes(hubp, &hubp->curs_attr); + if (hubp->pos.cur_ctl.bits.cur_enable != cur_en) { + if (cur_en && REG_READ(CURSOR_SURFACE_ADDRESS) == 0) + hubp->funcs->set_cursor_attributes(hubp, &hubp->curs_attr); - REG_UPDATE(CURSOR_CONTROL, - CURSOR_ENABLE, cur_en); + REG_UPDATE(CURSOR_CONTROL, + CURSOR_ENABLE, cur_en); + } REG_SET_2(CURSOR_POSITION, 0, CURSOR_X_POSITION, x_pos,