From 66033f47ca60294a95fc85ec3a3cc909dab7b765 Mon Sep 17 00:00:00 2001 From: Stefano Brivio Date: Thu, 6 Dec 2018 19:30:36 +0100 Subject: [PATCH 1/2] ipv6: Check available headroom in ip6_xmit() even without options Even if we send an IPv6 packet without options, MAX_HEADER might not be enough to account for the additional headroom required by alignment of hardware headers. On a configuration without HYPERV_NET, WLAN, AX25, and with IPV6_TUNNEL, sending short SCTP packets over IPv4 over L2TP over IPv6, we start with 100 bytes of allocated headroom in sctp_packet_transmit(), end up with 54 bytes after l2tp_xmit_skb(), and 14 bytes in ip6_finish_output2(). Those would be enough to append our 14 bytes header, but we're going to align that to 16 bytes, and write 2 bytes out of the allocated slab in neigh_hh_output(). KASan says: [ 264.967848] ================================================================== [ 264.967861] BUG: KASAN: slab-out-of-bounds in ip6_finish_output2+0x1aec/0x1c70 [ 264.967866] Write of size 16 at addr 000000006af1c7fe by task netperf/6201 [ 264.967870] [ 264.967876] CPU: 0 PID: 6201 Comm: netperf Not tainted 4.20.0-rc4+ #1 [ 264.967881] Hardware name: IBM 2827 H43 400 (z/VM 6.4.0) [ 264.967887] Call Trace: [ 264.967896] ([<00000000001347d6>] show_stack+0x56/0xa0) [ 264.967903] [<00000000017e379c>] dump_stack+0x23c/0x290 [ 264.967912] [<00000000007bc594>] print_address_description+0xf4/0x290 [ 264.967919] [<00000000007bc8fc>] kasan_report+0x13c/0x240 [ 264.967927] [<000000000162f5e4>] ip6_finish_output2+0x1aec/0x1c70 [ 264.967935] [<000000000163f890>] ip6_finish_output+0x430/0x7f0 [ 264.967943] [<000000000163fe44>] ip6_output+0x1f4/0x580 [ 264.967953] [<000000000163882a>] ip6_xmit+0xfea/0x1ce8 [ 264.967963] [<00000000017396e2>] inet6_csk_xmit+0x282/0x3f8 [ 264.968033] [<000003ff805fb0ba>] l2tp_xmit_skb+0xe02/0x13e0 [l2tp_core] [ 264.968037] [<000003ff80631192>] l2tp_eth_dev_xmit+0xda/0x150 [l2tp_eth] [ 264.968041] [<0000000001220020>] dev_hard_start_xmit+0x268/0x928 [ 264.968069] [<0000000001330e8e>] sch_direct_xmit+0x7ae/0x1350 [ 264.968071] [<000000000122359c>] __dev_queue_xmit+0x2b7c/0x3478 [ 264.968075] [<00000000013d2862>] ip_finish_output2+0xce2/0x11a0 [ 264.968078] [<00000000013d9b14>] ip_finish_output+0x56c/0x8c8 [ 264.968081] [<00000000013ddd1e>] ip_output+0x226/0x4c0 [ 264.968083] [<00000000013dbd6c>] __ip_queue_xmit+0x894/0x1938 [ 264.968100] [<000003ff80bc3a5c>] sctp_packet_transmit+0x29d4/0x3648 [sctp] [ 264.968116] [<000003ff80b7bf68>] sctp_outq_flush_ctrl.constprop.5+0x8d0/0xe50 [sctp] [ 264.968131] [<000003ff80b7c716>] sctp_outq_flush+0x22e/0x7d8 [sctp] [ 264.968146] [<000003ff80b35c68>] sctp_cmd_interpreter.isra.16+0x530/0x6800 [sctp] [ 264.968161] [<000003ff80b3410a>] sctp_do_sm+0x222/0x648 [sctp] [ 264.968177] [<000003ff80bbddac>] sctp_primitive_ASSOCIATE+0xbc/0xf8 [sctp] [ 264.968192] [<000003ff80b93328>] __sctp_connect+0x830/0xc20 [sctp] [ 264.968208] [<000003ff80bb11ce>] sctp_inet_connect+0x2e6/0x378 [sctp] [ 264.968212] [<0000000001197942>] __sys_connect+0x21a/0x450 [ 264.968215] [<000000000119aff8>] sys_socketcall+0x3d0/0xb08 [ 264.968218] [<000000000184ea7a>] system_call+0x2a2/0x2c0 [...] Just like ip_finish_output2() does for IPv4, check that we have enough headroom in ip6_xmit(), and reallocate it if we don't. This issue is older than git history. Reported-by: Jianlin Shi Signed-off-by: Stefano Brivio Signed-off-by: David S. Miller --- net/ipv6/ip6_output.c | 42 +++++++++++++++++++++--------------------- 1 file changed, 21 insertions(+), 21 deletions(-) diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c index 827a3f5ff3bbd..fcd3c66ded162 100644 --- a/net/ipv6/ip6_output.c +++ b/net/ipv6/ip6_output.c @@ -195,37 +195,37 @@ int ip6_xmit(const struct sock *sk, struct sk_buff *skb, struct flowi6 *fl6, const struct ipv6_pinfo *np = inet6_sk(sk); struct in6_addr *first_hop = &fl6->daddr; struct dst_entry *dst = skb_dst(skb); + unsigned int head_room; struct ipv6hdr *hdr; u8 proto = fl6->flowi6_proto; int seg_len = skb->len; int hlimit = -1; u32 mtu; - if (opt) { - unsigned int head_room; + head_room = sizeof(struct ipv6hdr) + LL_RESERVED_SPACE(dst->dev); + if (opt) + head_room += opt->opt_nflen + opt->opt_flen; - /* First: exthdrs may take lots of space (~8K for now) - MAX_HEADER is not enough. - */ - head_room = opt->opt_nflen + opt->opt_flen; - seg_len += head_room; - head_room += sizeof(struct ipv6hdr) + LL_RESERVED_SPACE(dst->dev); - - if (skb_headroom(skb) < head_room) { - struct sk_buff *skb2 = skb_realloc_headroom(skb, head_room); - if (!skb2) { - IP6_INC_STATS(net, ip6_dst_idev(skb_dst(skb)), - IPSTATS_MIB_OUTDISCARDS); - kfree_skb(skb); - return -ENOBUFS; - } - if (skb->sk) - skb_set_owner_w(skb2, skb->sk); - consume_skb(skb); - skb = skb2; + if (unlikely(skb_headroom(skb) < head_room)) { + struct sk_buff *skb2 = skb_realloc_headroom(skb, head_room); + if (!skb2) { + IP6_INC_STATS(net, ip6_dst_idev(skb_dst(skb)), + IPSTATS_MIB_OUTDISCARDS); + kfree_skb(skb); + return -ENOBUFS; } + if (skb->sk) + skb_set_owner_w(skb2, skb->sk); + consume_skb(skb); + skb = skb2; + } + + if (opt) { + seg_len += opt->opt_nflen + opt->opt_flen; + if (opt->opt_flen) ipv6_push_frag_opts(skb, opt, &proto); + if (opt->opt_nflen) ipv6_push_nfrag_opts(skb, opt, &proto, &first_hop, &fl6->saddr); From e6ac64d4c4d095085d7dd71cbd05704ac99829b2 Mon Sep 17 00:00:00 2001 From: Stefano Brivio Date: Thu, 6 Dec 2018 19:30:37 +0100 Subject: [PATCH 2/2] neighbour: Avoid writing before skb->head in neigh_hh_output() While skb_push() makes the kernel panic if the skb headroom is less than the unaligned hardware header size, it will proceed normally in case we copy more than that because of alignment, and we'll silently corrupt adjacent slabs. In the case fixed by the previous patch, "ipv6: Check available headroom in ip6_xmit() even without options", we end up in neigh_hh_output() with 14 bytes headroom, 14 bytes hardware header and write 16 bytes, starting 2 bytes before the allocated buffer. Always check we're not writing before skb->head and, if the headroom is not enough, warn and drop the packet. v2: - instead of panicking with BUG_ON(), WARN_ON_ONCE() and drop the packet (Eric Dumazet) - if we avoid the panic, though, we need to explicitly check the headroom before the memcpy(), otherwise we'll have corrupted slabs on a running kernel, after we warn - use __skb_push() instead of skb_push(), as the headroom check is already implemented here explicitly (Eric Dumazet) Signed-off-by: Stefano Brivio Signed-off-by: David S. Miller --- include/net/neighbour.h | 28 +++++++++++++++++++++++----- 1 file changed, 23 insertions(+), 5 deletions(-) diff --git a/include/net/neighbour.h b/include/net/neighbour.h index f58b384aa6c9e..665990c7dec8c 100644 --- a/include/net/neighbour.h +++ b/include/net/neighbour.h @@ -454,6 +454,7 @@ static inline int neigh_hh_bridge(struct hh_cache *hh, struct sk_buff *skb) static inline int neigh_hh_output(const struct hh_cache *hh, struct sk_buff *skb) { + unsigned int hh_alen = 0; unsigned int seq; unsigned int hh_len; @@ -461,16 +462,33 @@ static inline int neigh_hh_output(const struct hh_cache *hh, struct sk_buff *skb seq = read_seqbegin(&hh->hh_lock); hh_len = hh->hh_len; if (likely(hh_len <= HH_DATA_MOD)) { - /* this is inlined by gcc */ - memcpy(skb->data - HH_DATA_MOD, hh->hh_data, HH_DATA_MOD); + hh_alen = HH_DATA_MOD; + + /* skb_push() would proceed silently if we have room for + * the unaligned size but not for the aligned size: + * check headroom explicitly. + */ + if (likely(skb_headroom(skb) >= HH_DATA_MOD)) { + /* this is inlined by gcc */ + memcpy(skb->data - HH_DATA_MOD, hh->hh_data, + HH_DATA_MOD); + } } else { - unsigned int hh_alen = HH_DATA_ALIGN(hh_len); + hh_alen = HH_DATA_ALIGN(hh_len); - memcpy(skb->data - hh_alen, hh->hh_data, hh_alen); + if (likely(skb_headroom(skb) >= hh_alen)) { + memcpy(skb->data - hh_alen, hh->hh_data, + hh_alen); + } } } while (read_seqretry(&hh->hh_lock, seq)); - skb_push(skb, hh_len); + if (WARN_ON_ONCE(skb_headroom(skb) < hh_alen)) { + kfree_skb(skb); + return NET_XMIT_DROP; + } + + __skb_push(skb, hh_len); return dev_queue_xmit(skb); }