From 620f50332232b089815f7255f6a5fff0a8b10e63 Mon Sep 17 00:00:00 2001
From: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Date: Mon, 12 Oct 2015 16:28:38 +0200
Subject: [PATCH 1/6] ARM: at91/dt: use syscon for PMC
The PMC is not only used to drive the clocks but also has some registers
related to other functions. One of those is for example the USB gadget
bias.
Using a syscon allows to properly separate those functions.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
arch/arm/boot/dts/at91rm9200.dtsi | 2 +-
arch/arm/boot/dts/at91sam9260.dtsi | 2 +-
arch/arm/boot/dts/at91sam9261.dtsi | 2 +-
arch/arm/boot/dts/at91sam9263.dtsi | 2 +-
arch/arm/boot/dts/at91sam9g45.dtsi | 2 +-
arch/arm/boot/dts/at91sam9n12.dtsi | 2 +-
arch/arm/boot/dts/at91sam9rl.dtsi | 2 +-
arch/arm/boot/dts/at91sam9x5.dtsi | 2 +-
arch/arm/boot/dts/sama5d2.dtsi | 2 +-
arch/arm/boot/dts/sama5d3.dtsi | 2 +-
arch/arm/boot/dts/sama5d4.dtsi | 2 +-
11 files changed, 11 insertions(+), 11 deletions(-)
diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi
index 60edd8baebb81..39eb1e3fc6b81 100644
--- a/arch/arm/boot/dts/at91rm9200.dtsi
+++ b/arch/arm/boot/dts/at91rm9200.dtsi
@@ -97,7 +97,7 @@
};
pmc: pmc@fffffc00 {
- compatible = "atmel,at91rm9200-pmc";
+ compatible = "atmel,at91rm9200-pmc", "syscon";
reg = <0xfffffc00 0x100>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
interrupt-controller;
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index be9c027ddd979..d4884dd1c2439 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -100,7 +100,7 @@
};
pmc: pmc@fffffc00 {
- compatible = "atmel,at91sam9260-pmc";
+ compatible = "atmel,at91sam9260-pmc", "syscon";
reg = <0xfffffc00 0x100>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
interrupt-controller;
diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi
index ce1e3e94a40c2..5e09de4eb9cdf 100644
--- a/arch/arm/boot/dts/at91sam9261.dtsi
+++ b/arch/arm/boot/dts/at91sam9261.dtsi
@@ -568,7 +568,7 @@
};
pmc: pmc@fffffc00 {
- compatible = "atmel,at91rm9200-pmc";
+ compatible = "atmel,at91rm9200-pmc", "syscon";
reg = <0xfffffc00 0x100>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
interrupt-controller;
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
index f1f5fa3a9e6e2..93446420af258 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -93,7 +93,7 @@
};
pmc: pmc@fffffc00 {
- compatible = "atmel,at91rm9200-pmc";
+ compatible = "atmel,at91rm9200-pmc", "syscon";
reg = <0xfffffc00 0x100>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
interrupt-controller;
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index 18b8b9e297043..af8b708ac312a 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -114,7 +114,7 @@
};
pmc: pmc@fffffc00 {
- compatible = "atmel,at91sam9g45-pmc";
+ compatible = "atmel,at91sam9g45-pmc", "syscon";
reg = <0xfffffc00 0x100>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
interrupt-controller;
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index 32bc9a189db0f..95569a87b6c9d 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -97,7 +97,7 @@
};
pmc: pmc@fffffc00 {
- compatible = "atmel,at91sam9n12-pmc";
+ compatible = "atmel,at91sam9n12-pmc", "syscon";
reg = <0xfffffc00 0x200>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
interrupt-controller;
diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi
index a0b90aedd3b82..6d829db4e887c 100644
--- a/arch/arm/boot/dts/at91sam9rl.dtsi
+++ b/arch/arm/boot/dts/at91sam9rl.dtsi
@@ -814,7 +814,7 @@
};
pmc: pmc@fffffc00 {
- compatible = "atmel,at91sam9g45-pmc";
+ compatible = "atmel,at91sam9g45-pmc", "syscon";
reg = <0xfffffc00 0x100>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
interrupt-controller;
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index 9df8ca5666e9d..0827d594b1f0e 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -105,7 +105,7 @@
};
pmc: pmc@fffffc00 {
- compatible = "atmel,at91sam9x5-pmc";
+ compatible = "atmel,at91sam9x5-pmc", "syscon";
reg = <0xfffffc00 0x100>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
interrupt-controller;
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index 034cd48ae28b4..780c8afc76001 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -286,7 +286,7 @@
};
pmc: pmc@f0014000 {
- compatible = "atmel,sama5d2-pmc";
+ compatible = "atmel,sama5d2-pmc", "syscon";
reg = <0xf0014000 0x160>;
interrupts = <74 IRQ_TYPE_LEVEL_HIGH 7>;
interrupt-controller;
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index 1832736201ffb..a53279160f983 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -907,7 +907,7 @@
};
pmc: pmc@fffffc00 {
- compatible = "atmel,sama5d3-pmc";
+ compatible = "atmel,sama5d3-pmc", "syscon";
reg = <0xfffffc00 0x120>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
interrupt-controller;
diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi
index 9760a7549f901..4e67a27513244 100644
--- a/arch/arm/boot/dts/sama5d4.dtsi
+++ b/arch/arm/boot/dts/sama5d4.dtsi
@@ -386,7 +386,7 @@
};
pmc: pmc@f0018000 {
- compatible = "atmel,sama5d3-pmc";
+ compatible = "atmel,sama5d3-pmc", "syscon";
reg = <0xf0018000 0x120>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
interrupt-controller;
From 0db090d5428e53c6b939c65e9fdc01619137d529 Mon Sep 17 00:00:00 2001
From: Michael Opdenacker <michael.opdenacker@free-electrons.com>
Date: Tue, 13 Oct 2015 13:24:24 +0200
Subject: [PATCH 2/6] ARM: at91/dt: fix "disabled" property on at91rm9200
Fix instances of "disable" instead of "disabled"
in the at91rm9200 dtsi.
Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
arch/arm/boot/dts/at91rm9200.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi
index 39eb1e3fc6b81..f6cb7a80a2f55 100644
--- a/arch/arm/boot/dts/at91rm9200.dtsi
+++ b/arch/arm/boot/dts/at91rm9200.dtsi
@@ -426,7 +426,7 @@
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
clocks = <&ssc0_clk>;
clock-names = "pclk";
- status = "disable";
+ status = "disabled";
};
ssc1: ssc@fffd4000 {
@@ -437,7 +437,7 @@
pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
clocks = <&ssc1_clk>;
clock-names = "pclk";
- status = "disable";
+ status = "disabled";
};
ssc2: ssc@fffd8000 {
@@ -448,7 +448,7 @@
pinctrl-0 = <&pinctrl_ssc2_tx &pinctrl_ssc2_rx>;
clocks = <&ssc2_clk>;
clock-names = "pclk";
- status = "disable";
+ status = "disabled";
};
macb0: ethernet@fffbc000 {
From 143877e68107e38d19555657c2ec528597ffb70c Mon Sep 17 00:00:00 2001
From: Wenyou Yang <wenyou.yang@atmel.com>
Date: Wed, 14 Oct 2015 10:59:56 +0800
Subject: [PATCH 3/6] ARM: at91/dt: sama5d2_xplained: add regulator nodes
Add regulator nodes of PMIC ACT8945A chip on the board.
Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
arch/arm/boot/dts/at91-sama5d2_xplained.dts | 57 +++++++++++++++++++++
1 file changed, 57 insertions(+)
diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
index dc2397901c1ba..e07c2b206beba 100644
--- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
@@ -122,6 +122,63 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c0_default>;
status = "okay";
+
+ pmic: act8865@5b {
+ compatible = "active-semi,act8865";
+ reg = <0x5b>;
+ active-semi,vsel-high;
+ status = "okay";
+
+ regulators {
+ vdd_1v35_reg: DCDC_REG1 {
+ regulator-name = "VDD_1V35";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ };
+
+ vdd_1v2_reg: DCDC_REG2 {
+ regulator-name = "VDD_1V2";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ };
+
+ vdd_3v3_reg: DCDC_REG3 {
+ regulator-name = "VDD_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vdd_fuse_reg: LDO_REG1 {
+ regulator-name = "VDD_FUSE";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ };
+
+ vdd_3v3_lp_reg: LDO_REG2 {
+ regulator-name = "VDD_3V3_LP";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vdd_led_reg: LDO_REG3 {
+ regulator-name = "VDD_LED";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vdd_sdhc_1v8_reg: LDO_REG4 {
+ regulator-name = "VDD_SDHC_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ };
+ };
};
uart3: serial@fc008000 {
From 7c512d551eac34767cafcd2177b5b69e13c87f54 Mon Sep 17 00:00:00 2001
From: Sylvain Rochet <sylvain.rochet@finsecur.com>
Date: Mon, 7 Sep 2015 17:47:58 +0200
Subject: [PATCH 4/6] ARM: at91/dt: add pullup on mmc2 data signals
MMC data lines may be left floating if nothing is currently driving the
data lines, which is the case when mmc is in idle state, thus consuming
a useless extra amount of power. Add pullup on mmc2 data signals in the
same way it was previously done for mmc0 and mmc1.
Signed-off-by: Sylvain Rochet <sylvain.rochet@finsecur.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
arch/arm/boot/dts/sama5d3_mci2.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/sama5d3_mci2.dtsi b/arch/arm/boot/dts/sama5d3_mci2.dtsi
index 026b252f09b3e..e21099a1aef9c 100644
--- a/arch/arm/boot/dts/sama5d3_mci2.dtsi
+++ b/arch/arm/boot/dts/sama5d3_mci2.dtsi
@@ -24,9 +24,9 @@
};
pinctrl_mmc2_dat1_3: mmc2_dat1_3 {
atmel,pins =
- <AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC12 periph A MCI2_DA1 with pullup, conflicts with TIOA1 */
- AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC13 periph A MCI2_DA2 with pullup, conflicts with TIOB1 */
- AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC14 periph A MCI2_DA3 with pullup, conflicts with TCLK1 */
+ <AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PC12 periph A MCI2_DA1 with pullup, conflicts with TIOA1 */
+ AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PC13 periph A MCI2_DA2 with pullup, conflicts with TIOB1 */
+ AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PC14 periph A MCI2_DA3 with pullup, conflicts with TCLK1 */
};
};
};
From 236be662979f74d510ed70e069a3683906fe13df Mon Sep 17 00:00:00 2001
From: Gregory CLEMENT <gregory.clement@free-electrons.com>
Date: Fri, 16 Oct 2015 14:21:34 +0200
Subject: [PATCH 5/6] ARM: at91/dt: sama5d4: add the macb1 node
The second macb is present on all the sama5d4 SoCs. Let's add a node
reflecting it in the device tree.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
arch/arm/boot/dts/sama5d4.dtsi | 30 ++++++++++++++++++++++++++++++
1 file changed, 30 insertions(+)
diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi
index 4e67a27513244..15bbaf690047d 100644
--- a/arch/arm/boot/dts/sama5d4.dtsi
+++ b/arch/arm/boot/dts/sama5d4.dtsi
@@ -1189,6 +1189,19 @@
clock-names = "t0_clk", "slow_clk";
};
+ macb1: ethernet@fc028000 {
+ compatible = "atmel,sama5d4-gem";
+ reg = <0xfc028000 0x100>;
+ interrupts = <55 IRQ_TYPE_LEVEL_HIGH 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_macb1_rmii>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&macb1_clk>, <&macb1_clk>;
+ clock-names = "hclk", "pclk";
+ status = "disabled";
+ };
+
adc0: adc@fc034000 {
compatible = "atmel,at91sam9x5-adc";
reg = <0xfc034000 0x100>;
@@ -1635,6 +1648,23 @@
};
};
+ macb1 {
+ pinctrl_macb1_rmii: macb1_rmii-0 {
+ atmel,pins =
+ <AT91_PIOA 14 AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_TX0 */
+ AT91_PIOA 15 AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_TX1 */
+ AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_RX0 */
+ AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_RX1 */
+ AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_RXDV */
+ AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_RXER */
+ AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_TXEN */
+ AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_TXCK */
+ AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_MDC */
+ AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_MDIO */
+ >;
+ };
+ };
+
mmc0 {
pinctrl_mmc0_clk_cmd_dat0: mmc0_clk_cmd_dat0 {
atmel,pins =
From 512fc048e4fdc39f43e78af7e2fed5047d651979 Mon Sep 17 00:00:00 2001
From: Ludovic Desroches <ludovic.desroches@atmel.com>
Date: Fri, 16 Oct 2015 15:04:44 +0200
Subject: [PATCH 6/6] ARM: at91/dt: sama5d2: add missing devices
Big update of the sama5d2.dtsi file since many patches have reached te
mainline:
- add generated clocks
- enable crypto devices
- add flexcom devices
- add tdes device
- add sdmmc devices
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
arch/arm/boot/dts/sama5d2.dtsi | 152 ++++++++++++++++++++++++++++++++-
1 file changed, 150 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index 780c8afc76001..c1f0cba402892 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -263,6 +263,24 @@
cache-level = <2>;
};
+ sdmmc0: sdio-host@a0000000 {
+ compatible = "atmel,sama5d2-sdhci";
+ reg = <0xa0000000 0x300>;
+ interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&sdmmc0_hclk>, <&sdmmc0_gclk>, <&main>;
+ clock-names = "hclock", "multclk", "baseclk";
+ status = "disabled";
+ };
+
+ sdmmc1: sdio-host@b0000000 {
+ compatible = "atmel,sama5d2-sdhci";
+ reg = <0xb0000000 0x300>;
+ interrupts = <32 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&sdmmc1_hclk>, <&sdmmc1_gclk>, <&main>;
+ clock-names = "hclock", "multclk", "baseclk";
+ status = "disabled";
+ };
+
apb {
compatible = "simple-bus";
#address-cells = <1>;
@@ -619,6 +637,18 @@
atmel,clk-output-range = <0 83000000>;
};
+ i2s0_clk: i2s0_clk {
+ #clock-cells = <0>;
+ reg = <54>;
+ atmel,clk-output-range = <0 83000000>;
+ };
+
+ i2s1_clk: i2s1_clk {
+ #clock-cells = <0>;
+ reg = <55>;
+ atmel,clk-output-range = <0 83000000>;
+ };
+
classd_clk: classd_clk {
#clock-cells = <0>;
reg = <59>;
@@ -697,6 +727,52 @@
reg = <53>;
};
};
+
+ gck {
+ compatible = "atmel,sama5d2-clk-generated";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupt-parent = <&pmc>;
+ clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>;
+
+ sdmmc0_gclk: sdmmc0_gclk {
+ #clock-cells = <0>;
+ reg = <31>;
+ };
+
+ sdmmc1_gclk: sdmmc1_gclk {
+ #clock-cells = <0>;
+ reg = <32>;
+ };
+
+ tcb0_gclk: tcb0_gclk {
+ #clock-cells = <0>;
+ reg = <35>;
+ atmel,clk-output-range = <0 83000000>;
+ };
+
+ tcb1_gclk: tcb1_gclk {
+ #clock-cells = <0>;
+ reg = <36>;
+ atmel,clk-output-range = <0 83000000>;
+ };
+
+ pwm_gclk: pwm_gclk {
+ #clock-cells = <0>;
+ reg = <38>;
+ atmel,clk-output-range = <0 83000000>;
+ };
+
+ i2s0_gclk: i2s0_gclk {
+ #clock-cells = <0>;
+ reg = <54>;
+ };
+
+ i2s1_gclk: i2s1_gclk {
+ #clock-cells = <0>;
+ reg = <55>;
+ };
+ };
};
sha@f0028000 {
@@ -709,7 +785,7 @@
dma-names = "tx";
clocks = <&sha_clk>;
clock-names = "sha_clk";
- status = "disabled";
+ status = "okay";
};
aes@f002c000 {
@@ -725,7 +801,7 @@
dma-names = "tx", "rx";
clocks = <&aes_clk>;
clock-names = "aes_clk";
- status = "disabled";
+ status = "okay";
};
spi0: spi@f8000000 {
@@ -820,6 +896,32 @@
status = "disabled";
};
+ flx0: flexcom@f8034000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xf8034000 0x200>;
+ clocks = <&flx0_clk>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xf8034000 0x800>;
+ status = "disabled";
+ };
+
+ flx1: flexcom@f8038000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xf8038000 0x200>;
+ clocks = <&flx1_clk>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xf8038000 0x800>;
+ status = "disabled";
+ };
+
+ rstc@f8048000 {
+ compatible = "atmel,sama5d3-rstc";
+ reg = <0xf8048000 0x10>;
+ clocks = <&clk32k>;
+ };
+
pit: timer@f8048030 {
compatible = "atmel,at91sam9260-pit";
reg = <0xf8048030 0x10>;
@@ -897,6 +999,36 @@
status = "disabled";
};
+ flx2: flexcom@fc010000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xfc010000 0x200>;
+ clocks = <&flx2_clk>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xfc010000 0x800>;
+ status = "disabled";
+ };
+
+ flx3: flexcom@fc014000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xfc014000 0x200>;
+ clocks = <&flx3_clk>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xfc014000 0x800>;
+ status = "disabled";
+ };
+
+ flx4: flexcom@fc018000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xfc018000 0x200>;
+ clocks = <&flx4_clk>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xfc018000 0x800>;
+ status = "disabled";
+ };
+
aic: interrupt-controller@fc020000 {
#interrupt-cells = <3>;
compatible = "atmel,sama5d2-aic";
@@ -921,6 +1053,22 @@
clocks = <&twi1_clk>;
status = "disabled";
};
+
+ tdes@fc044000 {
+ compatible = "atmel,at91sam9g46-tdes";
+ reg = <0xfc044000 0x100>;
+ interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(28))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(29))>;
+ dma-names = "tx", "rx";
+ clocks = <&tdes_clk>;
+ clock-names = "tdes_clk";
+ status = "okay";
+ };
};
};
};