diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index e705aab9e38ba..f96c7f39ab7e4 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -310,6 +310,7 @@ source "drivers/clk/qcom/Kconfig"
source "drivers/clk/renesas/Kconfig"
source "drivers/clk/samsung/Kconfig"
source "drivers/clk/sprd/Kconfig"
+source "drivers/clk/sunxi/Kconfig"
source "drivers/clk/sunxi-ng/Kconfig"
source "drivers/clk/tegra/Kconfig"
source "drivers/clk/ti/Kconfig"
diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-a64.c b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
index 932836d26e2bf..be0deee701825 100644
--- a/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
@@ -531,7 +531,8 @@ static SUNXI_CCU_GATE(dram_ts_clk, "dram-ts", "dram",
static const char * const de_parents[] = { "pll-periph0-2x", "pll-de" };
static SUNXI_CCU_M_WITH_MUX_GATE(de_clk, "de", de_parents,
- 0x104, 0, 4, 24, 3, BIT(31), 0);
+ 0x104, 0, 4, 24, 3, BIT(31),
+ CLK_SET_RATE_PARENT);
static const char * const tcon0_parents[] = { "pll-mipi", "pll-video0-2x" };
static const u8 tcon0_table[] = { 0, 2, };
diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-h6.c b/drivers/clk/sunxi-ng/ccu-sun50i-h6.c
index 139e8389615c7..3c32d7798f27b 100644
--- a/drivers/clk/sunxi-ng/ccu-sun50i-h6.c
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-h6.c
@@ -266,7 +266,7 @@ static SUNXI_CCU_M_WITH_MUX_GATE(de_clk, "de", de_parents, 0x600,
0, 4, /* M */
24, 1, /* mux */
BIT(31), /* gate */
- 0);
+ CLK_SET_RATE_PARENT);
static SUNXI_CCU_GATE(bus_de_clk, "bus-de", "psi-ahb1-ahb2",
0x60c, BIT(0), 0);
@@ -311,7 +311,7 @@ static SUNXI_CCU_M_WITH_MUX_GATE(ve_clk, "ve", ve_parents, 0x690,
0, 3, /* M */
24, 1, /* mux */
BIT(31), /* gate */
- 0);
+ CLK_SET_RATE_PARENT);
static SUNXI_CCU_GATE(bus_ve_clk, "bus-ve", "psi-ahb1-ahb2",
0x69c, BIT(0), 0);
@@ -656,6 +656,8 @@ static const char * const hdmi_cec_parents[] = { "osc32k", "pll-periph0-2x" };
static const struct ccu_mux_fixed_prediv hdmi_cec_predivs[] = {
{ .index = 1, .div = 36621 },
};
+
+#define SUN50I_H6_HDMI_CEC_CLK_REG 0xb10
static struct ccu_mux hdmi_cec_clk = {
.enable = BIT(31),
@@ -689,7 +691,7 @@ static SUNXI_CCU_MUX_WITH_GATE(tcon_lcd0_clk, "tcon-lcd0",
tcon_lcd0_parents, 0xb60,
24, 3, /* mux */
BIT(31), /* gate */
- 0);
+ CLK_SET_RATE_PARENT);
static SUNXI_CCU_GATE(bus_tcon_lcd0_clk, "bus-tcon-lcd0", "ahb3",
0xb7c, BIT(0), 0);
@@ -704,7 +706,7 @@ static SUNXI_CCU_MP_WITH_MUX_GATE(tcon_tv0_clk, "tcon-tv0",
8, 2, /* P */
24, 3, /* mux */
BIT(31), /* gate */
- 0);
+ CLK_SET_RATE_PARENT);
static SUNXI_CCU_GATE(bus_tcon_tv0_clk, "bus-tcon-tv0", "ahb3",
0xb9c, BIT(0), 0);
@@ -1200,6 +1202,15 @@ static int sun50i_h6_ccu_probe(struct platform_device *pdev)
val &= ~(GENMASK(21, 16) | BIT(0));
writel(val | (7 << 16), reg + SUN50I_H6_PLL_AUDIO_REG);
+ /*
+ * First clock parent (osc32K) is unusable for CEC. But since there
+ * is no good way to force parent switch (both run with same frequency),
+ * just set second clock parent here.
+ */
+ val = readl(reg + SUN50I_H6_HDMI_CEC_CLK_REG);
+ val |= BIT(24);
+ writel(val, reg + SUN50I_H6_HDMI_CEC_CLK_REG);
+
return sunxi_ccu_probe(pdev->dev.of_node, reg, &sun50i_h6_ccu_desc);
}
diff --git a/drivers/clk/sunxi-ng/ccu-sun5i.h b/drivers/clk/sunxi-ng/ccu-sun5i.h
index 93a275fbd9a90..b66abd4fd0bf1 100644
--- a/drivers/clk/sunxi-ng/ccu-sun5i.h
+++ b/drivers/clk/sunxi-ng/ccu-sun5i.h
@@ -60,10 +60,6 @@
/* The rest of the module clocks are exported */
-#define CLK_MBUS 99
-
-/* And finally the IEP clock */
-
#define CLK_NUMBER (CLK_IEP + 1)
#endif /* _CCU_SUN5I_H_ */
diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-a83t.c b/drivers/clk/sunxi-ng/ccu-sun8i-a83t.c
index 2d6555d731705..5f714b4d8ee42 100644
--- a/drivers/clk/sunxi-ng/ccu-sun8i-a83t.c
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-a83t.c
@@ -513,8 +513,9 @@ static SUNXI_CCU_GATE(csi_misc_clk, "csi-misc", "osc24M", 0x130, BIT(16), 0);
static SUNXI_CCU_GATE(mipi_csi_clk, "mipi-csi", "osc24M", 0x130, BIT(31), 0);
-static const char * const csi_mclk_parents[] = { "pll-de", "osc24M" };
-static const u8 csi_mclk_table[] = { 3, 5 };
+static const char * const csi_mclk_parents[] = { "pll-video0", "pll-de",
+ "osc24M" };
+static const u8 csi_mclk_table[] = { 0, 3, 5 };
static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(csi_mclk_clk, "csi-mclk",
csi_mclk_parents, csi_mclk_table,
0x134,
diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-v3s.c b/drivers/clk/sunxi-ng/ccu-sun8i-v3s.c
index ac12f261f8caa..eada0e2918591 100644
--- a/drivers/clk/sunxi-ng/ccu-sun8i-v3s.c
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-v3s.c
@@ -325,7 +325,8 @@ static SUNXI_CCU_GATE(dram_ohci_clk, "dram-ohci", "dram",
static const char * const de_parents[] = { "pll-video", "pll-periph0" };
static SUNXI_CCU_M_WITH_MUX_GATE(de_clk, "de", de_parents,
- 0x104, 0, 4, 24, 2, BIT(31), 0);
+ 0x104, 0, 4, 24, 2, BIT(31),
+ CLK_SET_RATE_PARENT);
static const char * const tcon_parents[] = { "pll-video" };
static SUNXI_CCU_M_WITH_MUX_GATE(tcon_clk, "tcon", tcon_parents,
diff --git a/drivers/clk/sunxi-ng/ccu-suniv-f1c100s.c b/drivers/clk/sunxi-ng/ccu-suniv-f1c100s.c
index a09dfbe364023..dc9f0a365664e 100644
--- a/drivers/clk/sunxi-ng/ccu-suniv-f1c100s.c
+++ b/drivers/clk/sunxi-ng/ccu-suniv-f1c100s.c
@@ -240,7 +240,7 @@ static SUNXI_CCU_MUX_WITH_GATE(spdif_clk, "spdif", i2s_spdif_parents,
/* The BSP header file has a CIR_CFG, but no mod clock uses this definition */
static SUNXI_CCU_GATE(usb_phy0_clk, "usb-phy0", "osc24M",
- 0x0cc, BIT(8), 0);
+ 0x0cc, BIT(1), 0);
static SUNXI_CCU_GATE(dram_ve_clk, "dram-ve", "pll-ddr",
0x100, BIT(0), 0);
diff --git a/drivers/clk/sunxi/Kconfig b/drivers/clk/sunxi/Kconfig
new file mode 100644
index 0000000000000..2b6207cc4eda1
--- /dev/null
+++ b/drivers/clk/sunxi/Kconfig
@@ -0,0 +1,43 @@
+menuconfig CLK_SUNXI
+ bool "Legacy clock support for Allwinner SoCs"
+ depends on ARCH_SUNXI || COMPILE_TEST
+ default y
+
+if CLK_SUNXI
+
+config CLK_SUNXI_CLOCKS
+ bool "Legacy clock drivers"
+ default y
+ help
+ Legacy clock drivers being used on older (A10, A13, A20,
+ A23, A31, A80) SoCs. These drivers are kept around for
+ Device Tree backward compatibility issues, in case one would
+ still use a Device Tree with one clock provider by
+ node. Newer Device Trees and newer SoCs use the drivers
+ controlled by CONFIG_SUNXI_CCU.
+
+config CLK_SUNXI_PRCM_SUN6I
+ bool "Legacy A31 PRCM driver"
+ select MFD_SUN6I_PRCM
+ default y
+ help
+ Legacy clock driver for the A31 PRCM clocks. Those are
+ usually needed for the PMIC communication, mostly.
+
+config CLK_SUNXI_PRCM_SUN8I
+ bool "Legacy sun8i PRCM driver"
+ select MFD_SUN6I_PRCM
+ default y
+ help
+ Legacy clock driver for the sun8i family PRCM clocks.
+ Those are usually needed for the PMIC communication,
+ mostly.
+
+config CLK_SUNXI_PRCM_SUN9I
+ bool "Legacy A80 PRCM driver"
+ default y
+ help
+ Legacy clock driver for the A80 PRCM clocks. Those are
+ usually needed for the PMIC communication, mostly.
+
+endif
diff --git a/drivers/clk/sunxi/Makefile b/drivers/clk/sunxi/Makefile
index be88368b48a1c..e10824c76ae92 100644
--- a/drivers/clk/sunxi/Makefile
+++ b/drivers/clk/sunxi/Makefile
@@ -3,27 +3,32 @@
# Makefile for sunxi specific clk
#
-obj-y += clk-sunxi.o clk-factors.o
-obj-y += clk-a10-codec.o
-obj-y += clk-a10-hosc.o
-obj-y += clk-a10-mod1.o
-obj-y += clk-a10-pll2.o
-obj-y += clk-a10-ve.o
-obj-y += clk-a20-gmac.o
-obj-y += clk-mod0.o
-obj-y += clk-simple-gates.o
-obj-y += clk-sun4i-display.o
-obj-y += clk-sun4i-pll3.o
-obj-y += clk-sun4i-tcon-ch1.o
-obj-y += clk-sun8i-bus-gates.o
-obj-y += clk-sun8i-mbus.o
-obj-y += clk-sun9i-core.o
-obj-y += clk-sun9i-mmc.o
-obj-y += clk-usb.o
+obj-$(CONFIG_CLK_SUNXI) += clk-factors.o
-obj-$(CONFIG_MACH_SUN9I) += clk-sun8i-apb0.o
-obj-$(CONFIG_MACH_SUN9I) += clk-sun9i-cpus.o
+obj-$(CONFIG_CLK_SUNXI_CLOCKS) += clk-sunxi.o
+obj-$(CONFIG_CLK_SUNXI_CLOCKS) += clk-a10-codec.o
+obj-$(CONFIG_CLK_SUNXI_CLOCKS) += clk-a10-hosc.o
+obj-$(CONFIG_CLK_SUNXI_CLOCKS) += clk-a10-mod1.o
+obj-$(CONFIG_CLK_SUNXI_CLOCKS) += clk-a10-pll2.o
+obj-$(CONFIG_CLK_SUNXI_CLOCKS) += clk-a10-ve.o
+obj-$(CONFIG_CLK_SUNXI_CLOCKS) += clk-a20-gmac.o
+obj-$(CONFIG_CLK_SUNXI_CLOCKS) += clk-mod0.o
+obj-$(CONFIG_CLK_SUNXI_CLOCKS) += clk-simple-gates.o
+obj-$(CONFIG_CLK_SUNXI_CLOCKS) += clk-sun4i-display.o
+obj-$(CONFIG_CLK_SUNXI_CLOCKS) += clk-sun4i-pll3.o
+obj-$(CONFIG_CLK_SUNXI_CLOCKS) += clk-sun4i-tcon-ch1.o
+obj-$(CONFIG_CLK_SUNXI_CLOCKS) += clk-sun8i-bus-gates.o
+obj-$(CONFIG_CLK_SUNXI_CLOCKS) += clk-sun8i-mbus.o
+obj-$(CONFIG_CLK_SUNXI_CLOCKS) += clk-sun9i-core.o
+obj-$(CONFIG_CLK_SUNXI_CLOCKS) += clk-sun9i-mmc.o
+obj-$(CONFIG_CLK_SUNXI_CLOCKS) += clk-usb.o
-obj-$(CONFIG_MFD_SUN6I_PRCM) += \
- clk-sun6i-ar100.o clk-sun6i-apb0.o clk-sun6i-apb0-gates.o \
- clk-sun8i-apb0.o
+obj-$(CONFIG_CLK_SUNXI_CLOCKS) += clk-sun8i-apb0.o
+obj-$(CONFIG_CLK_SUNXI_CLOCKS) += clk-sun9i-cpus.o
+
+obj-$(CONFIG_CLK_SUNXI_PRCM_SUN6I) += clk-sun6i-apb0.o
+obj-$(CONFIG_CLK_SUNXI_PRCM_SUN6I) += clk-sun6i-apb0-gates.o
+obj-$(CONFIG_CLK_SUNXI_PRCM_SUN6I) += clk-sun6i-ar100.o
+
+obj-$(CONFIG_CLK_SUNXI_PRCM_SUN8I) += clk-sun8i-apb0.o
+obj-$(CONFIG_CLK_SUNXI_PRCM_SUN8I) += clk-sun6i-apb0-gates.o
diff --git a/include/dt-bindings/clock/sun5i-ccu.h b/include/dt-bindings/clock/sun5i-ccu.h
index 81f34d477aeba..2e6b9ddcc24e5 100644
--- a/include/dt-bindings/clock/sun5i-ccu.h
+++ b/include/dt-bindings/clock/sun5i-ccu.h
@@ -100,7 +100,7 @@
#define CLK_AVS 96
#define CLK_HDMI 97
#define CLK_GPU 98
-
+#define CLK_MBUS 99
#define CLK_IEP 100
#endif /* _DT_BINDINGS_CLK_SUN5I_H_ */