usb: dwc2: gadget: Accept LPM token when TxFIFO is not empty

Set GLPMCFG_LPM_ACCEPT_CTRL_ISOC bit in GLPMCFG register
to accept LPM token during ISOC transfers when TxFIFO is
not empty.

- Added two definitions.
  	#define GLPMCFG_LPM_ACCEPT_CTRL_CONTROL        BIT(21)
  	#define GLPMCFG_LPM_ACCEPT_CTRL_ISOC   BIT(22)
  This patch uses GLPMCFG_LPM_ACCEPT_CTRL_ISOC.
  GLPMCFG_LPM_ACCEPT_CTRL_CONTROL is defined for further use.

- Added setting GLPMCFG_LPM_ACCEPT_CTRL_ISOC bit in GLPMCFG
  register in dwc2_gadget_init_lpm function.

Signed-off-by: Artur Petrosyan <arturp@synopsys.com>
Signed-off-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

drivers/usb/dwc2/gadget.c

@@ -5026,6 +5026,7 @@ void dwc2_gadget_init_lpm(struct dwc2_hsotg *hsotg)
 	val |= hsotg->params.lpm_clock_gating ? GLPMCFG_ENBLSLPM : 0;
 	val |= hsotg->params.hird_threshold << GLPMCFG_HIRD_THRES_SHIFT;
 	val |= hsotg->params.besl ? GLPMCFG_ENBESL : 0;
+	val |= GLPMCFG_LPM_ACCEPT_CTRL_ISOC;
 	dwc2_writel(hsotg, val, GLPMCFG);
 	dev_dbg(hsotg->dev, "GLPMCFG=0x%08x\n", dwc2_readl(hsotg, GLPMCFG));
 

drivers/usb/dwc2/hw.h

@@ -333,6 +333,8 @@
 #define GLPMCFG_SNDLPM			BIT(24)
 #define GLPMCFG_RETRY_CNT_MASK		(0x7 << 21)
 #define GLPMCFG_RETRY_CNT_SHIFT		21
+#define GLPMCFG_LPM_ACCEPT_CTRL_CONTROL	BIT(21)
+#define GLPMCFG_LPM_ACCEPT_CTRL_ISOC	BIT(22)
 #define GLPMCFG_LPM_CHNL_INDX_MASK	(0xf << 17)
 #define GLPMCFG_LPM_CHNL_INDX_SHIFT	17
 #define GLPMCFG_L1RESUMEOK		BIT(16)