diff --git a/drivers/net/phy/aquantia/aquantia_main.c b/drivers/net/phy/aquantia/aquantia_main.c
index 4d156d406bab9..dcad3fa1ddc3a 100644
--- a/drivers/net/phy/aquantia/aquantia_main.c
+++ b/drivers/net/phy/aquantia/aquantia_main.c
@@ -11,6 +11,7 @@
 #include <linux/module.h>
 #include <linux/delay.h>
 #include <linux/bitfield.h>
+#include <linux/of.h>
 #include <linux/phy.h>
 
 #include "aquantia.h"
@@ -71,6 +72,11 @@
 #define MDIO_AN_TX_VEND_INT_MASK2		0xd401
 #define MDIO_AN_TX_VEND_INT_MASK2_LINK		BIT(0)
 
+#define PMAPMD_RSVD_VEND_PROV			0xe400
+#define PMAPMD_RSVD_VEND_PROV_MDI_CONF		GENMASK(1, 0)
+#define PMAPMD_RSVD_VEND_PROV_MDI_REVERSE	BIT(0)
+#define PMAPMD_RSVD_VEND_PROV_MDI_FORCE		BIT(1)
+
 #define MDIO_AN_RX_LP_STAT1			0xe820
 #define MDIO_AN_RX_LP_STAT1_1000BASET_FULL	BIT(15)
 #define MDIO_AN_RX_LP_STAT1_1000BASET_HALF	BIT(14)
@@ -485,6 +491,29 @@ static void aqr107_chip_info(struct phy_device *phydev)
 		   fw_major, fw_minor, build_id, prov_id);
 }
 
+static int aqr107_config_mdi(struct phy_device *phydev)
+{
+	struct device_node *np = phydev->mdio.dev.of_node;
+	u32 mdi_conf;
+	int ret;
+
+	ret = of_property_read_u32(np, "marvell,mdi-cfg-order", &mdi_conf);
+
+	/* Do nothing in case property "marvell,mdi-cfg-order" is not present */
+	if (ret == -ENOENT)
+		return 0;
+
+	if (ret)
+		return ret;
+
+	if (mdi_conf & ~PMAPMD_RSVD_VEND_PROV_MDI_REVERSE)
+		return -EINVAL;
+
+	return phy_modify_mmd(phydev, MDIO_MMD_PMAPMD, PMAPMD_RSVD_VEND_PROV,
+			      PMAPMD_RSVD_VEND_PROV_MDI_CONF,
+			      mdi_conf | PMAPMD_RSVD_VEND_PROV_MDI_FORCE);
+}
+
 static int aqr107_config_init(struct phy_device *phydev)
 {
 	struct aqr107_priv *priv = phydev->priv;
@@ -514,6 +543,10 @@ static int aqr107_config_init(struct phy_device *phydev)
 	if (ret)
 		return ret;
 
+	ret = aqr107_config_mdi(phydev);
+	if (ret)
+		return ret;
+
 	/* Restore LED polarity state after reset */
 	for_each_set_bit(led_active_low, &priv->leds_active_low, AQR_MAX_LEDS) {
 		ret = aqr_phy_led_active_low_set(phydev, led_active_low, true);