diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 8422262febaf..aaa36c27b0f9 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -2586,6 +2586,11 @@ mt7531_setup_common(struct dsa_switch *ds)
 	/* Allow mirroring frames received on the local port (monitor port). */
 	mt7530_set(priv, MT753X_AGC, LOCAL_EN);
 
+	/* Enable Special Tag for rx frames */
+	if (priv->id == ID_EN7581)
+		mt7530_write(priv, MT753X_CPORT_SPTAG_CFG,
+			     CPORT_SW2FE_STAG_EN | CPORT_FE2SW_STAG_EN);
+
 	/* Flush the FDB table */
 	ret = mt7530_fdb_cmd(priv, MT7530_FDB_FLUSH, NULL);
 	if (ret < 0)
diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h
index 448200689f49..349d72a35771 100644
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
@@ -627,6 +627,10 @@ enum mt7531_xtal_fsel {
 #define  MT7531_GPIO12_RG_RXD3_MASK	GENMASK(19, 16)
 #define  MT7531_EXT_P_MDIO_12		(2 << 16)
 
+#define MT753X_CPORT_SPTAG_CFG		0x7c10
+#define  CPORT_SW2FE_STAG_EN		BIT(1)
+#define  CPORT_FE2SW_STAG_EN		BIT(0)
+
 /* Registers for LED GPIO control (MT7530 only)
  * All registers follow this pattern:
  * [ 2: 0]  port 0