From ae5f76d4044d1580849316c49290678605e0889d Mon Sep 17 00:00:00 2001 From: Ryan Walklin Date: Sat, 15 Feb 2025 11:02:24 +1300 Subject: [PATCH] ASoC: sun4i-codec: correct dapm widgets and controls for h616 The previous H616 support patch added a single LINEOUT DAPM pin switch to the card controls. As the codec in this SoC only has a single route, this seemed reasonable at the time, however is redundant given the existing DAPM codec widget definitions controlling the digital and analog sides of the codec. It is also insufficient to describe the scenario where separate components (muxes, jack detection etc) are used to modify the audio route external to the SoC. For example the Anbernic RG(##)XX series of devices uses a headphone jack detection switch, GPIO-controlled speaker amplifier and a passive external mux chip to route audio. Remove the redundant LINEOUT card control, and add a Speaker pin switch control and Headphone DAPM widget to allow control of the above hardware. Signed-off-by: Chris Morgan Signed-off-by: Ryan Walklin Tested-by: Philippe Simons Link: https://patch.msgid.link/20250214220247.10810-3-ryan@testtoast.com Signed-off-by: Mark Brown --- sound/soc/sunxi/sun4i-codec.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/sound/soc/sunxi/sun4i-codec.c b/sound/soc/sunxi/sun4i-codec.c index 886b3fa537d2..f24bbefeb392 100644 --- a/sound/soc/sunxi/sun4i-codec.c +++ b/sound/soc/sunxi/sun4i-codec.c @@ -1916,10 +1916,11 @@ static const struct snd_soc_component_driver sun50i_h616_codec_codec = { }; static const struct snd_kcontrol_new sun50i_h616_card_controls[] = { - SOC_DAPM_PIN_SWITCH("LINEOUT"), + SOC_DAPM_PIN_SWITCH("Speaker"), }; static const struct snd_soc_dapm_widget sun50i_h616_codec_card_dapm_widgets[] = { + SND_SOC_DAPM_HP("Headphone", NULL), SND_SOC_DAPM_LINE("Line Out", NULL), SND_SOC_DAPM_SPK("Speaker", sun4i_codec_spk_event), };