diff --git a/drivers/net/ethernet/tehuti/tn40.c b/drivers/net/ethernet/tehuti/tn40.c
index 259bdac24cf21..558b791a97edd 100644
--- a/drivers/net/ethernet/tehuti/tn40.c
+++ b/drivers/net/ethernet/tehuti/tn40.c
@@ -1778,7 +1778,7 @@ static int tn40_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	ret = tn40_phy_register(priv);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to set up PHY.\n");
-		goto err_free_irq;
+		goto err_cleanup_swnodes;
 	}
 
 	ret = tn40_priv_init(priv);
@@ -1795,6 +1795,8 @@ static int tn40_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	return 0;
 err_unregister_phydev:
 	tn40_phy_unregister(priv);
+err_cleanup_swnodes:
+	tn40_swnodes_cleanup(priv);
 err_free_irq:
 	pci_free_irq_vectors(pdev);
 err_unset_drvdata:
@@ -1816,6 +1818,7 @@ static void tn40_remove(struct pci_dev *pdev)
 	unregister_netdev(ndev);
 
 	tn40_phy_unregister(priv);
+	tn40_swnodes_cleanup(priv);
 	pci_free_irq_vectors(priv->pdev);
 	pci_set_drvdata(pdev, NULL);
 	iounmap(priv->regs);
@@ -1832,6 +1835,10 @@ static const struct pci_device_id tn40_id_table[] = {
 			 PCI_VENDOR_ID_ASUSTEK, 0x8709) },
 	{ PCI_DEVICE_SUB(PCI_VENDOR_ID_TEHUTI, 0x4022,
 			 PCI_VENDOR_ID_EDIMAX, 0x8103) },
+	{ PCI_DEVICE_SUB(PCI_VENDOR_ID_TEHUTI, PCI_DEVICE_ID_TEHUTI_TN9510,
+			 PCI_VENDOR_ID_TEHUTI, 0x3015) },
+	{ PCI_DEVICE_SUB(PCI_VENDOR_ID_TEHUTI, PCI_DEVICE_ID_TEHUTI_TN9510,
+			 PCI_VENDOR_ID_EDIMAX, 0x8102) },
 	{ }
 };
 
diff --git a/drivers/net/ethernet/tehuti/tn40.h b/drivers/net/ethernet/tehuti/tn40.h
index 490781fe51205..25da8686d4691 100644
--- a/drivers/net/ethernet/tehuti/tn40.h
+++ b/drivers/net/ethernet/tehuti/tn40.h
@@ -4,10 +4,13 @@
 #ifndef _TN40_H_
 #define _TN40_H_
 
+#include <linux/property.h>
 #include "tn40_regs.h"
 
 #define TN40_DRV_NAME "tn40xx"
 
+#define PCI_DEVICE_ID_TEHUTI_TN9510	0x4025
+
 #define TN40_MDIO_SPEED_1MHZ (1)
 #define TN40_MDIO_SPEED_6MHZ (6)
 
@@ -102,10 +105,39 @@ struct tn40_txdb {
 	int size; /* Number of elements in the db */
 };
 
+#define NODE_PROP(_NAME, _PROP)	(		\
+	(const struct software_node) {		\
+		.name = _NAME,			\
+		.properties = _PROP,		\
+	})
+
+#define NODE_PAR_PROP(_NAME, _PAR, _PROP)	(	\
+	(const struct software_node) {		\
+		.name = _NAME,			\
+		.parent = _PAR,			\
+		.properties = _PROP,		\
+	})
+
+enum tn40_swnodes {
+	SWNODE_MDIO,
+	SWNODE_PHY,
+	SWNODE_MAX
+};
+
+struct tn40_nodes {
+	char phy_name[32];
+	char mdio_name[32];
+	struct property_entry phy_props[3];
+	struct software_node swnodes[SWNODE_MAX];
+	const struct software_node *group[SWNODE_MAX + 1];
+};
+
 struct tn40_priv {
 	struct net_device *ndev;
 	struct pci_dev *pdev;
 
+	struct tn40_nodes nodes;
+
 	struct napi_struct napi;
 	/* RX FIFOs: 1 for data (full) descs, and 2 for free descs */
 	struct tn40_rxd_fifo rxd_fifo0;
@@ -225,6 +257,7 @@ static inline void tn40_write_reg(struct tn40_priv *priv, u32 reg, u32 val)
 
 int tn40_set_link_speed(struct tn40_priv *priv, u32 speed);
 
+void tn40_swnodes_cleanup(struct tn40_priv *priv);
 int tn40_mdiobus_init(struct tn40_priv *priv);
 
 int tn40_phy_register(struct tn40_priv *priv);
diff --git a/drivers/net/ethernet/tehuti/tn40_mdio.c b/drivers/net/ethernet/tehuti/tn40_mdio.c
index af18615d64a8a..fb1a4a2e4dbc5 100644
--- a/drivers/net/ethernet/tehuti/tn40_mdio.c
+++ b/drivers/net/ethernet/tehuti/tn40_mdio.c
@@ -14,6 +14,8 @@
 	 (FIELD_PREP(TN40_MDIO_PRTAD_MASK, (port))))
 #define TN40_MDIO_CMD_READ BIT(15)
 
+#define AQR105_FIRMWARE "tehuti/aqr105-tn40xx.cld"
+
 static void tn40_mdio_set_speed(struct tn40_priv *priv, u32 speed)
 {
 	void __iomem *regs = priv->regs;
@@ -111,6 +113,56 @@ static int tn40_mdio_write_c45(struct mii_bus *mii_bus, int addr, int devnum,
 	return  tn40_mdio_write(mii_bus->priv, addr, devnum, regnum, val);
 }
 
+/* registers an mdio node and an aqr105 PHY at address 1
+ * tn40_mdio-%id {
+ *	ethernet-phy@1 {
+ *		compatible = "ethernet-phy-id03a1.b4a3";
+ *		reg = <1>;
+ *		firmware-name = AQR105_FIRMWARE;
+ *	};
+ * };
+ */
+static int tn40_swnodes_register(struct tn40_priv *priv)
+{
+	struct tn40_nodes *nodes = &priv->nodes;
+	struct pci_dev *pdev = priv->pdev;
+	struct software_node *swnodes;
+	u32 id;
+
+	id = pci_dev_id(pdev);
+
+	snprintf(nodes->phy_name, sizeof(nodes->phy_name), "ethernet-phy@1");
+	snprintf(nodes->mdio_name, sizeof(nodes->mdio_name), "tn40_mdio-%x",
+		 id);
+
+	swnodes = nodes->swnodes;
+
+	swnodes[SWNODE_MDIO] = NODE_PROP(nodes->mdio_name, NULL);
+
+	nodes->phy_props[0] = PROPERTY_ENTRY_STRING("compatible",
+						    "ethernet-phy-id03a1.b4a3");
+	nodes->phy_props[1] = PROPERTY_ENTRY_U32("reg", 1);
+	nodes->phy_props[2] = PROPERTY_ENTRY_STRING("firmware-name",
+						    AQR105_FIRMWARE);
+	swnodes[SWNODE_PHY] = NODE_PAR_PROP(nodes->phy_name,
+					    &swnodes[SWNODE_MDIO],
+					    nodes->phy_props);
+
+	nodes->group[SWNODE_PHY] = &swnodes[SWNODE_PHY];
+	nodes->group[SWNODE_MDIO] = &swnodes[SWNODE_MDIO];
+	return software_node_register_node_group(nodes->group);
+}
+
+void tn40_swnodes_cleanup(struct tn40_priv *priv)
+{
+	/* cleanup of swnodes is only needed for AQR105-based cards */
+	if (priv->pdev->device == PCI_DEVICE_ID_TEHUTI_TN9510) {
+		fwnode_handle_put(dev_fwnode(&priv->mdio->dev));
+		device_remove_software_node(&priv->mdio->dev);
+		software_node_unregister_node_group(priv->nodes.group);
+	}
+}
+
 int tn40_mdiobus_init(struct tn40_priv *priv)
 {
 	struct pci_dev *pdev = priv->pdev;
@@ -129,14 +181,40 @@ int tn40_mdiobus_init(struct tn40_priv *priv)
 
 	bus->read_c45 = tn40_mdio_read_c45;
 	bus->write_c45 = tn40_mdio_write_c45;
+	priv->mdio = bus;
 
+	/* provide swnodes for AQR105-based cards only */
+	if (pdev->device == PCI_DEVICE_ID_TEHUTI_TN9510) {
+		ret = tn40_swnodes_register(priv);
+		if (ret) {
+			pr_err("swnodes failed\n");
+			return ret;
+		}
+
+		ret = device_add_software_node(&bus->dev,
+					       priv->nodes.group[SWNODE_MDIO]);
+		if (ret) {
+			dev_err(&pdev->dev,
+				"device_add_software_node failed: %d\n", ret);
+			goto err_swnodes_unregister;
+		}
+	}
+
+	tn40_mdio_set_speed(priv, TN40_MDIO_SPEED_6MHZ);
 	ret = devm_mdiobus_register(&pdev->dev, bus);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to register mdiobus %d %u %u\n",
 			ret, bus->state, MDIOBUS_UNREGISTERED);
-		return ret;
+		goto err_swnodes_cleanup;
 	}
-	tn40_mdio_set_speed(priv, TN40_MDIO_SPEED_6MHZ);
-	priv->mdio = bus;
 	return 0;
+
+err_swnodes_unregister:
+	software_node_unregister_node_group(priv->nodes.group);
+	return ret;
+err_swnodes_cleanup:
+	tn40_swnodes_cleanup(priv);
+	return ret;
 }
+
+MODULE_FIRMWARE(AQR105_FIRMWARE);
diff --git a/drivers/net/phy/aquantia/aquantia_firmware.c b/drivers/net/phy/aquantia/aquantia_firmware.c
index dab3af80593f5..bbbcc9736b00e 100644
--- a/drivers/net/phy/aquantia/aquantia_firmware.c
+++ b/drivers/net/phy/aquantia/aquantia_firmware.c
@@ -328,10 +328,11 @@ static int aqr_firmware_load_fs(struct phy_device *phydev)
 	const char *fw_name;
 	int ret;
 
-	ret = of_property_read_string(dev->of_node, "firmware-name",
-				      &fw_name);
-	if (ret)
+	ret = device_property_read_string(dev, "firmware-name", &fw_name);
+	if (ret) {
+		phydev_err(phydev, "failed to read firmware-name: %d\n", ret);
 		return ret;
+	}
 
 	ret = request_firmware(&fw, fw_name, dev);
 	if (ret) {
diff --git a/drivers/net/phy/aquantia/aquantia_main.c b/drivers/net/phy/aquantia/aquantia_main.c
index e42ace4e682aa..08b1c9cc902b8 100644
--- a/drivers/net/phy/aquantia/aquantia_main.c
+++ b/drivers/net/phy/aquantia/aquantia_main.c
@@ -50,6 +50,7 @@
 #define MDIO_AN_VEND_PROV_1000BASET_HALF	BIT(14)
 #define MDIO_AN_VEND_PROV_5000BASET_FULL	BIT(11)
 #define MDIO_AN_VEND_PROV_2500BASET_FULL	BIT(10)
+#define MDIO_AN_VEND_PROV_EXC_PHYID_INFO	BIT(6)
 #define MDIO_AN_VEND_PROV_DOWNSHIFT_EN		BIT(4)
 #define MDIO_AN_VEND_PROV_DOWNSHIFT_MASK	GENMASK(3, 0)
 #define MDIO_AN_VEND_PROV_DOWNSHIFT_DFLT	4
@@ -333,6 +334,238 @@ static int aqr_read_status(struct phy_device *phydev)
 	return genphy_c45_read_status(phydev);
 }
 
+static int aqr105_get_features(struct phy_device *phydev)
+{
+	int ret;
+
+	/* Normal feature discovery */
+	ret = genphy_c45_pma_read_abilities(phydev);
+	if (ret)
+		return ret;
+
+	/* The AQR105 PHY misses to indicate the 2.5G and 5G modes, so add them
+	 * here
+	 */
+	linkmode_set_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT,
+			 phydev->supported);
+	linkmode_set_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
+			 phydev->supported);
+
+	/* The AQR105 PHY suppports both RJ45 and SFP+ interfaces */
+	linkmode_set_bit(ETHTOOL_LINK_MODE_TP_BIT, phydev->supported);
+	linkmode_set_bit(ETHTOOL_LINK_MODE_FIBRE_BIT, phydev->supported);
+
+	return 0;
+}
+
+static int aqr105_setup_forced(struct phy_device *phydev)
+{
+	int vend = MDIO_AN_VEND_PROV_EXC_PHYID_INFO;
+	int ctrl10 = 0;
+	int adv = ADVERTISE_CSMA;
+	int ret;
+
+	switch (phydev->speed) {
+	case SPEED_100:
+		adv |= ADVERTISE_100FULL;
+		break;
+	case SPEED_1000:
+		adv |= ADVERTISE_NPAGE;
+		if (phydev->duplex == DUPLEX_FULL)
+			vend |= MDIO_AN_VEND_PROV_1000BASET_FULL;
+		else
+			vend |= MDIO_AN_VEND_PROV_1000BASET_HALF;
+		break;
+	case SPEED_2500:
+		adv |= (ADVERTISE_NPAGE | ADVERTISE_RESV);
+		vend |= MDIO_AN_VEND_PROV_2500BASET_FULL;
+		break;
+	case SPEED_5000:
+		adv |= (ADVERTISE_NPAGE | ADVERTISE_RESV);
+		vend |= MDIO_AN_VEND_PROV_5000BASET_FULL;
+		break;
+	case SPEED_10000:
+		adv |= (ADVERTISE_NPAGE | ADVERTISE_RESV);
+		ctrl10 |= MDIO_AN_10GBT_CTRL_ADV10G;
+		break;
+	default:
+		return -EINVAL;
+	}
+	ret = phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE, adv);
+	if (ret < 0)
+		return ret;
+	ret = phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_VEND_PROV, vend);
+	if (ret < 0)
+		return ret;
+	ret = phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL, ctrl10);
+	if (ret < 0)
+		return ret;
+
+	/* set by vendor driver, but should be on by default */
+	ret = phy_set_bits_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1,
+			       MDIO_AN_CTRL1_XNP);
+	if (ret < 0)
+		return ret;
+
+	return genphy_c45_an_disable_aneg(phydev);
+}
+
+static int aqr105_config_aneg(struct phy_device *phydev)
+{
+	bool changed = false;
+	u16 reg;
+	int ret;
+
+	ret = aqr_set_mdix(phydev, phydev->mdix_ctrl);
+	if (ret < 0)
+		return ret;
+	if (ret > 0)
+		changed = true;
+
+	if (phydev->autoneg == AUTONEG_DISABLE)
+		return aqr105_setup_forced(phydev);
+
+	ret = genphy_c45_an_config_aneg(phydev);
+	if (ret < 0)
+		return ret;
+	if (ret > 0)
+		changed = true;
+
+	/* Clause 45 has no standardized support for 1000BaseT, therefore
+	 * use vendor registers for this mode.
+	 */
+	reg = 0;
+	if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
+			      phydev->advertising))
+		reg |= MDIO_AN_VEND_PROV_1000BASET_FULL;
+
+	if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT,
+			      phydev->advertising))
+		reg |= MDIO_AN_VEND_PROV_1000BASET_HALF;
+
+	/* Handle the case when the 2.5G and 5G speeds are not advertised */
+	if (linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
+			      phydev->advertising))
+		reg |= MDIO_AN_VEND_PROV_2500BASET_FULL;
+
+	if (linkmode_test_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT,
+			      phydev->advertising))
+		reg |= MDIO_AN_VEND_PROV_5000BASET_FULL;
+
+	ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_VEND_PROV,
+				     MDIO_AN_VEND_PROV_1000BASET_HALF |
+				     MDIO_AN_VEND_PROV_1000BASET_FULL |
+				     MDIO_AN_VEND_PROV_2500BASET_FULL |
+				     MDIO_AN_VEND_PROV_5000BASET_FULL, reg);
+	if (ret < 0)
+		return ret;
+	if (ret > 0)
+		changed = true;
+
+	return genphy_c45_check_and_restart_aneg(phydev, changed);
+}
+
+static int aqr105_read_rate(struct phy_device *phydev)
+{
+	int val;
+
+	val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_TX_VEND_STATUS1);
+	if (val < 0)
+		return val;
+
+	if (val & MDIO_AN_TX_VEND_STATUS1_FULL_DUPLEX)
+		phydev->duplex = DUPLEX_FULL;
+	else
+		phydev->duplex = DUPLEX_HALF;
+
+	switch (FIELD_GET(MDIO_AN_TX_VEND_STATUS1_RATE_MASK, val)) {
+	case MDIO_AN_TX_VEND_STATUS1_10BASET:
+		phydev->speed = SPEED_10;
+		break;
+	case MDIO_AN_TX_VEND_STATUS1_100BASETX:
+		phydev->speed = SPEED_100;
+		break;
+	case MDIO_AN_TX_VEND_STATUS1_1000BASET:
+		phydev->speed = SPEED_1000;
+		break;
+	case MDIO_AN_TX_VEND_STATUS1_2500BASET:
+		phydev->speed = SPEED_2500;
+		break;
+	case MDIO_AN_TX_VEND_STATUS1_5000BASET:
+		phydev->speed = SPEED_5000;
+		break;
+	case MDIO_AN_TX_VEND_STATUS1_10GBASET:
+		phydev->speed = SPEED_10000;
+		break;
+	default:
+		phydev->speed = SPEED_UNKNOWN;
+	}
+
+	return 0;
+}
+
+static int aqr105_read_status(struct phy_device *phydev)
+{
+	int ret;
+	int val;
+
+	ret = aqr_read_status(phydev);
+	if (ret)
+		return ret;
+
+	if (!phydev->link || phydev->autoneg == AUTONEG_DISABLE)
+		return 0;
+
+	/**
+	 * The status register is not immediately correct on line side link up.
+	 * Poll periodically until it reflects the correct ON state.
+	 * Only return fail for read error, timeout defaults to OFF state.
+	 */
+	ret = phy_read_mmd_poll_timeout(phydev, MDIO_MMD_PHYXS,
+					MDIO_PHYXS_VEND_IF_STATUS, val,
+					(FIELD_GET(MDIO_PHYXS_VEND_IF_STATUS_TYPE_MASK, val) !=
+					MDIO_PHYXS_VEND_IF_STATUS_TYPE_OFF),
+					AQR107_OP_IN_PROG_SLEEP,
+					AQR107_OP_IN_PROG_TIMEOUT, false);
+	if (ret && ret != -ETIMEDOUT)
+		return ret;
+
+	switch (FIELD_GET(MDIO_PHYXS_VEND_IF_STATUS_TYPE_MASK, val)) {
+	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_KR:
+		phydev->interface = PHY_INTERFACE_MODE_10GKR;
+		break;
+	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_KX:
+		phydev->interface = PHY_INTERFACE_MODE_1000BASEKX;
+		break;
+	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_XFI:
+		phydev->interface = PHY_INTERFACE_MODE_10GBASER;
+		break;
+	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_USXGMII:
+		phydev->interface = PHY_INTERFACE_MODE_USXGMII;
+		break;
+	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_XAUI:
+		phydev->interface = PHY_INTERFACE_MODE_XAUI;
+		break;
+	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_SGMII:
+		phydev->interface = PHY_INTERFACE_MODE_SGMII;
+		break;
+	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_RXAUI:
+		phydev->interface = PHY_INTERFACE_MODE_RXAUI;
+		break;
+	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_OCSGMII:
+		phydev->interface = PHY_INTERFACE_MODE_2500BASEX;
+		break;
+	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_OFF:
+	default:
+		phydev->link = false;
+		phydev->interface = PHY_INTERFACE_MODE_NA;
+		break;
+	}
+
+	/* Read rate from vendor register */
+	return aqr105_read_rate(phydev);
+}
+
 static int aqr107_read_rate(struct phy_device *phydev)
 {
 	u32 config_reg;
@@ -911,10 +1144,13 @@ static struct phy_driver aqr_driver[] = {
 {
 	PHY_ID_MATCH_MODEL(PHY_ID_AQR105),
 	.name		= "Aquantia AQR105",
-	.config_aneg    = aqr_config_aneg,
+	.get_features	= aqr105_get_features,
+	.probe		= aqr107_probe,
+	.config_init	= aqr107_config_init,
+	.config_aneg    = aqr105_config_aneg,
 	.config_intr	= aqr_config_intr,
 	.handle_interrupt = aqr_handle_interrupt,
-	.read_status	= aqr_read_status,
+	.read_status	= aqr105_read_status,
 	.suspend	= aqr107_suspend,
 	.resume		= aqr107_resume,
 },
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 7e2f10182c0cf..ede596c1a69d1 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -551,6 +551,8 @@ static int mdiobus_create_device(struct mii_bus *bus,
 static struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr, bool c45)
 {
 	struct phy_device *phydev = ERR_PTR(-ENODEV);
+	struct fwnode_handle *fwnode;
+	char node_name[16];
 	int err;
 
 	phydev = get_phy_device(bus, addr, c45);
@@ -562,6 +564,18 @@ static struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr, bool c45)
 	 */
 	of_mdiobus_link_mdiodev(bus, &phydev->mdio);
 
+	/* Search for a swnode for the phy in the swnode hierarchy of the bus.
+	 * If there is no swnode for the phy provided, just ignore it.
+	 */
+	if (dev_fwnode(&bus->dev) && !dev_fwnode(&phydev->mdio.dev)) {
+		snprintf(node_name, sizeof(node_name), "ethernet-phy@%d",
+			 addr);
+		fwnode = fwnode_get_named_child_node(dev_fwnode(&bus->dev),
+						     node_name);
+		if (fwnode)
+			device_set_node(&phydev->mdio.dev, fwnode);
+	}
+
 	err = phy_device_register(phydev);
 	if (err) {
 		phy_device_free(phydev);