From 0725ac9ac4492568514a94971f46dd0546684ff8 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 22 Nov 2021 23:21:53 +0100 Subject: [PATCH 01/22] ASoC: tegra20-spdif: stop setting slave_id The DMA resource is never set up anywhere, and passing this as slave_id has not been the proper procedure in a long time. As a preparation for removing all slave_id references from the ALSA code, remove this one. According to Dmitry Osipenko, this driver has never been used and the mechanism for configuring DMA would not work as it is implemented, so this part will get rewritten when the driver gets put into use again in the future. Signed-off-by: Arnd Bergmann Reviewed-by: Dmitry Osipenko Acked-by: Mark Brown Link: https://lore.kernel.org/r/20211122222203.4103644-2-arnd@kernel.org Signed-off-by: Vinod Koul --- sound/soc/tegra/tegra20_spdif.c | 1 - 1 file changed, 1 deletion(-) diff --git a/sound/soc/tegra/tegra20_spdif.c b/sound/soc/tegra/tegra20_spdif.c index 7751575cd6d6a..57a6c576b91f5 100644 --- a/sound/soc/tegra/tegra20_spdif.c +++ b/sound/soc/tegra/tegra20_spdif.c @@ -290,7 +290,6 @@ static int tegra20_spdif_platform_probe(struct platform_device *pdev) spdif->playback_dma_data.addr = mem->start + TEGRA20_SPDIF_DATA_OUT; spdif->playback_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; spdif->playback_dma_data.maxburst = 4; - spdif->playback_dma_data.slave_id = dmareq->start; pm_runtime_enable(&pdev->dev); From d53939dcc4cfbe6de2c42daec90c199825f6a96f Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 22 Nov 2021 23:22:02 +0100 Subject: [PATCH 02/22] dmaengine: tegra20-apb: stop checking config->slave_id Nothing sets the slave_id field any more, so stop accessing it to allow the removal of this field. Signed-off-by: Arnd Bergmann Acked-by: Mark Brown Link: https://lore.kernel.org/r/20211122222203.4103644-11-arnd@kernel.org Signed-off-by: Vinod Koul --- drivers/dma/tegra20-apb-dma.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/drivers/dma/tegra20-apb-dma.c b/drivers/dma/tegra20-apb-dma.c index b7260749e8eee..eaafcbe4ca941 100644 --- a/drivers/dma/tegra20-apb-dma.c +++ b/drivers/dma/tegra20-apb-dma.c @@ -343,12 +343,6 @@ static int tegra_dma_slave_config(struct dma_chan *dc, } memcpy(&tdc->dma_sconfig, sconfig, sizeof(*sconfig)); - if (tdc->slave_id == TEGRA_APBDMA_SLAVE_ID_INVALID && - sconfig->device_fc) { - if (sconfig->slave_id > TEGRA_APBDMA_CSR_REQ_SEL_MASK) - return -EINVAL; - tdc->slave_id = sconfig->slave_id; - } tdc->config_init = true; return 0; From bdecfceffeeb9000e78b0f613069f5c06974b347 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 22 Nov 2021 23:21:54 +0100 Subject: [PATCH 03/22] ASoC: dai_dma: remove slave_id field This field is no longer set from any driver now, so remove the last references as well. Signed-off-by: Arnd Bergmann Acked-by: Mark Brown Link: https://lore.kernel.org/r/20211122222203.4103644-3-arnd@kernel.org Signed-off-by: Vinod Koul --- include/sound/dmaengine_pcm.h | 2 -- sound/core/pcm_dmaengine.c | 5 ++--- 2 files changed, 2 insertions(+), 5 deletions(-) diff --git a/include/sound/dmaengine_pcm.h b/include/sound/dmaengine_pcm.h index 96666efddb396..38ea046e653c5 100644 --- a/include/sound/dmaengine_pcm.h +++ b/include/sound/dmaengine_pcm.h @@ -60,7 +60,6 @@ struct dma_chan *snd_dmaengine_pcm_get_chan(struct snd_pcm_substream *substream) * @maxburst: Maximum number of words(note: words, as in units of the * src_addr_width member, not bytes) that can be send to or received from the * DAI in one burst. - * @slave_id: Slave requester id for the DMA channel. * @filter_data: Custom DMA channel filter data, this will usually be used when * requesting the DMA channel. * @chan_name: Custom channel name to use when requesting DMA channel. @@ -74,7 +73,6 @@ struct snd_dmaengine_dai_dma_data { dma_addr_t addr; enum dma_slave_buswidth addr_width; u32 maxburst; - unsigned int slave_id; void *filter_data; const char *chan_name; unsigned int fifo_size; diff --git a/sound/core/pcm_dmaengine.c b/sound/core/pcm_dmaengine.c index 1fc2fa0775744..af6f717e1e7e6 100644 --- a/sound/core/pcm_dmaengine.c +++ b/sound/core/pcm_dmaengine.c @@ -91,8 +91,8 @@ EXPORT_SYMBOL_GPL(snd_hwparams_to_dma_slave_config); * @dma_data: DAI DMA data * @slave_config: DMA slave configuration * - * Initializes the {dst,src}_addr, {dst,src}_maxburst, {dst,src}_addr_width and - * slave_id fields of the DMA slave config from the same fields of the DAI DMA + * Initializes the {dst,src}_addr, {dst,src}_maxburst, {dst,src}_addr_width + * fields of the DMA slave config from the same fields of the DAI DMA * data struct. The src and dst fields will be initialized depending on the * direction of the substream. If the substream is a playback stream the dst * fields will be initialized, if it is a capture stream the src fields will be @@ -124,7 +124,6 @@ void snd_dmaengine_pcm_set_config_from_dai_data( slave_config->src_addr_width = dma_data->addr_width; } - slave_config->slave_id = dma_data->slave_id; slave_config->peripheral_config = dma_data->peripheral_config; slave_config->peripheral_size = dma_data->peripheral_size; } From feaa4a09acc9a33211dbe3930357922f7ad9750c Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 22 Nov 2021 23:21:55 +0100 Subject: [PATCH 04/22] spi: pic32: stop setting dma_config->slave_id Setting slave_id makes no sense with DT based probing, and should eventually get removed entirely. Address this driver by no longer setting the field here. I could not find which DMA driver is used on PIC32, if it's in the tree at all, but none of the obvious ones even care about slave_id any more. Acked-by: Mark Brown Signed-off-by: Arnd Bergmann Link: https://lore.kernel.org/r/20211122222203.4103644-4-arnd@kernel.org Signed-off-by: Vinod Koul --- drivers/spi/spi-pic32.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/spi/spi-pic32.c b/drivers/spi/spi-pic32.c index 5eb7b61bbb4d8..f86433b29260e 100644 --- a/drivers/spi/spi-pic32.c +++ b/drivers/spi/spi-pic32.c @@ -370,7 +370,6 @@ static int pic32_spi_dma_config(struct pic32_spi *pic32s, u32 dma_width) cfg.src_addr_width = dma_width; cfg.dst_addr_width = dma_width; /* tx channel */ - cfg.slave_id = pic32s->tx_irq; cfg.direction = DMA_MEM_TO_DEV; ret = dmaengine_slave_config(master->dma_tx, &cfg); if (ret) { @@ -378,7 +377,6 @@ static int pic32_spi_dma_config(struct pic32_spi *pic32s, u32 dma_width) return ret; } /* rx channel */ - cfg.slave_id = pic32s->rx_irq; cfg.direction = DMA_DEV_TO_MEM; ret = dmaengine_slave_config(master->dma_rx, &cfg); if (ret) From f59f6aaead975f0ec4d8ff2d59c4ffb8cf0127b2 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 22 Nov 2021 23:21:56 +0100 Subject: [PATCH 05/22] mmc: bcm2835: stop setting chan_config->slave_id The field is not interpreted by the DMA engine driver, as all the data is passed from devicetree instead. Remove the assignment so the field can eventually be deleted. Reviewed-by: Nicolas Saenz Julienne Signed-off-by: Arnd Bergmann Acked-by: Ulf Hansson Acked-by: Mark Brown Link: https://lore.kernel.org/r/20211122222203.4103644-5-arnd@kernel.org Signed-off-by: Vinod Koul --- drivers/mmc/host/bcm2835.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/mmc/host/bcm2835.c b/drivers/mmc/host/bcm2835.c index 8c2361e662774..463b707d9e997 100644 --- a/drivers/mmc/host/bcm2835.c +++ b/drivers/mmc/host/bcm2835.c @@ -1293,14 +1293,12 @@ static int bcm2835_add_host(struct bcm2835_host *host) host->dma_cfg_tx.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; host->dma_cfg_tx.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; - host->dma_cfg_tx.slave_id = 13; /* DREQ channel */ host->dma_cfg_tx.direction = DMA_MEM_TO_DEV; host->dma_cfg_tx.src_addr = 0; host->dma_cfg_tx.dst_addr = host->phys_addr + SDDATA; host->dma_cfg_rx.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; host->dma_cfg_rx.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; - host->dma_cfg_rx.slave_id = 13; /* DREQ channel */ host->dma_cfg_rx.direction = DMA_DEV_TO_MEM; host->dma_cfg_rx.src_addr = host->phys_addr + SDDATA; host->dma_cfg_rx.dst_addr = 0; From 37228af82e5f4d7be64f71c63463112b9dd4fc55 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 22 Nov 2021 23:21:57 +0100 Subject: [PATCH 06/22] dmaengine: shdma: remove legacy slave_id parsing The slave device is picked through either devicetree or a filter function, and any remaining out-of-tree drivers would have warned about this usage since 2015. Stop interpreting the field finally so it can be removed from the interface. Reviewed-by: Laurent Pinchart Signed-off-by: Arnd Bergmann Acked-by: Mark Brown Link: https://lore.kernel.org/r/20211122222203.4103644-6-arnd@kernel.org Signed-off-by: Vinod Koul --- drivers/dma/sh/shdma-base.c | 8 -------- 1 file changed, 8 deletions(-) diff --git a/drivers/dma/sh/shdma-base.c b/drivers/dma/sh/shdma-base.c index 7f72b3f4cd1ae..41c6bc650fa3e 100644 --- a/drivers/dma/sh/shdma-base.c +++ b/drivers/dma/sh/shdma-base.c @@ -786,14 +786,6 @@ static int shdma_config(struct dma_chan *chan, if (!config) return -EINVAL; - /* - * overriding the slave_id through dma_slave_config is deprecated, - * but possibly some out-of-tree drivers still do it. - */ - if (WARN_ON_ONCE(config->slave_id && - config->slave_id != schan->real_slave_id)) - schan->real_slave_id = config->slave_id; - /* * We could lock this, but you shouldn't be configuring the * channel, while using it... From 134c37fa250a87a7e77c80a7c59ae16c462e46e0 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 22 Nov 2021 23:21:58 +0100 Subject: [PATCH 07/22] dmaengine: pxa/mmp: stop referencing config->slave_id The last driver referencing the slave_id on Marvell PXA and MMP platforms was the SPI driver, but this stopped doing so a long time ago, so the TODO from the earlier patch can no be removed. Fixes: b729bf34535e ("spi/pxa2xx: Don't use slave_id of dma_slave_config") Fixes: 13b3006b8ebd ("dma: mmp_pdma: add filter function") Signed-off-by: Arnd Bergmann Acked-by: Mark Brown Link: https://lore.kernel.org/r/20211122222203.4103644-7-arnd@kernel.org Signed-off-by: Vinod Koul --- drivers/dma/mmp_pdma.c | 6 ------ drivers/dma/pxa_dma.c | 7 ------- 2 files changed, 13 deletions(-) diff --git a/drivers/dma/mmp_pdma.c b/drivers/dma/mmp_pdma.c index a23563cd118b7..5a53d7fcef018 100644 --- a/drivers/dma/mmp_pdma.c +++ b/drivers/dma/mmp_pdma.c @@ -727,12 +727,6 @@ static int mmp_pdma_config_write(struct dma_chan *dchan, chan->dir = direction; chan->dev_addr = addr; - /* FIXME: drivers should be ported over to use the filter - * function. Once that's done, the following two lines can - * be removed. - */ - if (cfg->slave_id) - chan->drcmr = cfg->slave_id; return 0; } diff --git a/drivers/dma/pxa_dma.c b/drivers/dma/pxa_dma.c index 52d04641e3611..6078cc81892e4 100644 --- a/drivers/dma/pxa_dma.c +++ b/drivers/dma/pxa_dma.c @@ -909,13 +909,6 @@ static void pxad_get_config(struct pxad_chan *chan, *dcmd |= PXA_DCMD_BURST16; else if (maxburst == 32) *dcmd |= PXA_DCMD_BURST32; - - /* FIXME: drivers should be ported over to use the filter - * function. Once that's done, the following two lines can - * be removed. - */ - if (chan->cfg.slave_id) - chan->drcmr = chan->cfg.slave_id; } static struct dma_async_tx_descriptor * From 722d6d2bdcc2dcff5527c704fb8f2bbcb018a232 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 22 Nov 2021 23:21:59 +0100 Subject: [PATCH 08/22] dmaengine: sprd: stop referencing config->slave_id It appears that the code that reads the slave_id from the channel config was copied incorrectly from other drivers. Nothing ever sets this field on platforms that use this driver, so remove the reference. Reviewed-by: Baolin Wang Signed-off-by: Arnd Bergmann Acked-by: Mark Brown Link: https://lore.kernel.org/r/20211122222203.4103644-8-arnd@kernel.org Signed-off-by: Vinod Koul --- drivers/dma/sprd-dma.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/dma/sprd-dma.c b/drivers/dma/sprd-dma.c index 4357d2395e6b7..7f158ef5672d7 100644 --- a/drivers/dma/sprd-dma.c +++ b/drivers/dma/sprd-dma.c @@ -795,9 +795,6 @@ static int sprd_dma_fill_desc(struct dma_chan *chan, return dst_datawidth; } - if (slave_cfg->slave_id) - schan->dev_id = slave_cfg->slave_id; - hw->cfg = SPRD_DMA_DONOT_WAIT_BDONE << SPRD_DMA_WAIT_BDONE_OFFSET; /* From 03de6b273805b3c552ff158f8688555937375926 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 22 Nov 2021 23:22:00 +0100 Subject: [PATCH 09/22] dmaengine: qcom-adm: stop abusing slave_id config The slave_id was previously used to pick one DMA slave instead of another, but this is now done through the DMA descriptors in device tree. For the qcom_adm driver, the configuration is documented in the DT binding to contain a tuple of device identifier and a "crci" field, but the implementation ends up using only a single cell for identifying the slave, with the crci getting passed in nonstandard properties of the device, and passed through the dma driver using the old slave_id field. Part of the problem apparently is that the nand driver ends up using only a single DMA request ID, but requires distinct values for "crci" depending on the type of transfer. Change both the dmaengine driver and the two slave drivers to allow the documented binding to work in addition to the ad-hoc passing of crci values. In order to no longer abuse the slave_id field, pass the data using the "peripheral_config" mechanism instead. Signed-off-by: Arnd Bergmann Acked-by: Mark Brown Link: https://lore.kernel.org/r/20211122222203.4103644-9-arnd@kernel.org Signed-off-by: Vinod Koul --- drivers/dma/qcom/qcom_adm.c | 56 +++++++++++++++++++++++++++---- drivers/mtd/nand/raw/qcom_nandc.c | 14 ++++++-- drivers/tty/serial/msm_serial.c | 15 +++++++-- include/linux/dma/qcom_adm.h | 12 +++++++ 4 files changed, 86 insertions(+), 11 deletions(-) create mode 100644 include/linux/dma/qcom_adm.h diff --git a/drivers/dma/qcom/qcom_adm.c b/drivers/dma/qcom/qcom_adm.c index ee78bed8d60d2..facdacf8aede6 100644 --- a/drivers/dma/qcom/qcom_adm.c +++ b/drivers/dma/qcom/qcom_adm.c @@ -8,6 +8,7 @@ #include #include #include +#include #include #include #include @@ -140,6 +141,8 @@ struct adm_chan { struct adm_async_desc *curr_txd; struct dma_slave_config slave; + u32 crci; + u32 mux; struct list_head node; int error; @@ -379,8 +382,8 @@ static struct dma_async_tx_descriptor *adm_prep_slave_sg(struct dma_chan *chan, return ERR_PTR(-EINVAL); } - crci = achan->slave.slave_id & 0xf; - if (!crci || achan->slave.slave_id > 0x1f) { + crci = achan->crci & 0xf; + if (!crci || achan->crci > 0x1f) { dev_err(adev->dev, "invalid crci value\n"); return ERR_PTR(-EINVAL); } @@ -403,9 +406,7 @@ static struct dma_async_tx_descriptor *adm_prep_slave_sg(struct dma_chan *chan, if (!async_desc) return ERR_PTR(-ENOMEM); - if (crci) - async_desc->mux = achan->slave.slave_id & ADM_CRCI_MUX_SEL ? - ADM_CRCI_CTL_MUX_SEL : 0; + async_desc->mux = achan->mux ? ADM_CRCI_CTL_MUX_SEL : 0; async_desc->crci = crci; async_desc->blk_size = blk_size; async_desc->dma_len = single_count * sizeof(struct adm_desc_hw_single) + @@ -488,10 +489,13 @@ static int adm_terminate_all(struct dma_chan *chan) static int adm_slave_config(struct dma_chan *chan, struct dma_slave_config *cfg) { struct adm_chan *achan = to_adm_chan(chan); + struct qcom_adm_peripheral_config *config = cfg->peripheral_config; unsigned long flag; spin_lock_irqsave(&achan->vc.lock, flag); memcpy(&achan->slave, cfg, sizeof(struct dma_slave_config)); + if (cfg->peripheral_size == sizeof(config)) + achan->crci = config->crci; spin_unlock_irqrestore(&achan->vc.lock, flag); return 0; @@ -694,6 +698,45 @@ static void adm_channel_init(struct adm_device *adev, struct adm_chan *achan, achan->vc.desc_free = adm_dma_free_desc; } +/** + * adm_dma_xlate + * @dma_spec: pointer to DMA specifier as found in the device tree + * @ofdma: pointer to DMA controller data + * + * This can use either 1-cell or 2-cell formats, the first cell + * identifies the slave device, while the optional second cell + * contains the crci value. + * + * Returns pointer to appropriate dma channel on success or NULL on error. + */ +static struct dma_chan *adm_dma_xlate(struct of_phandle_args *dma_spec, + struct of_dma *ofdma) +{ + struct dma_device *dev = ofdma->of_dma_data; + struct dma_chan *chan, *candidate = NULL; + struct adm_chan *achan; + + if (!dev || dma_spec->args_count > 2) + return NULL; + + list_for_each_entry(chan, &dev->channels, device_node) + if (chan->chan_id == dma_spec->args[0]) { + candidate = chan; + break; + } + + if (!candidate) + return NULL; + + achan = to_adm_chan(candidate); + if (dma_spec->args_count == 2) + achan->crci = dma_spec->args[1]; + else + achan->crci = 0; + + return dma_get_slave_channel(candidate); +} + static int adm_dma_probe(struct platform_device *pdev) { struct adm_device *adev; @@ -838,8 +881,7 @@ static int adm_dma_probe(struct platform_device *pdev) goto err_disable_clks; } - ret = of_dma_controller_register(pdev->dev.of_node, - of_dma_xlate_by_chan_id, + ret = of_dma_controller_register(pdev->dev.of_node, adm_dma_xlate, &adev->common); if (ret) goto err_unregister_dma; diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c index 04e6f7b267064..7c6efa3b62557 100644 --- a/drivers/mtd/nand/raw/qcom_nandc.c +++ b/drivers/mtd/nand/raw/qcom_nandc.c @@ -6,6 +6,7 @@ #include #include #include +#include #include #include #include @@ -952,6 +953,7 @@ static int prep_adm_dma_desc(struct qcom_nand_controller *nandc, bool read, struct dma_async_tx_descriptor *dma_desc; struct scatterlist *sgl; struct dma_slave_config slave_conf; + struct qcom_adm_peripheral_config periph_conf = {}; enum dma_transfer_direction dir_eng; int ret; @@ -983,11 +985,19 @@ static int prep_adm_dma_desc(struct qcom_nand_controller *nandc, bool read, if (read) { slave_conf.src_maxburst = 16; slave_conf.src_addr = nandc->base_dma + reg_off; - slave_conf.slave_id = nandc->data_crci; + if (nandc->data_crci) { + periph_conf.crci = nandc->data_crci; + slave_conf.peripheral_config = &periph_conf; + slave_conf.peripheral_size = sizeof(periph_conf); + } } else { slave_conf.dst_maxburst = 16; slave_conf.dst_addr = nandc->base_dma + reg_off; - slave_conf.slave_id = nandc->cmd_crci; + if (nandc->cmd_crci) { + periph_conf.crci = nandc->cmd_crci; + slave_conf.peripheral_config = &periph_conf; + slave_conf.peripheral_size = sizeof(periph_conf); + } } ret = dmaengine_slave_config(nandc->chan, &slave_conf); diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c index fcef7a961430b..c6be09f44dc16 100644 --- a/drivers/tty/serial/msm_serial.c +++ b/drivers/tty/serial/msm_serial.c @@ -9,6 +9,7 @@ #include #include +#include #include #include #include @@ -290,6 +291,7 @@ static void msm_request_tx_dma(struct msm_port *msm_port, resource_size_t base) { struct device *dev = msm_port->uart.dev; struct dma_slave_config conf; + struct qcom_adm_peripheral_config periph_conf = {}; struct msm_dma *dma; u32 crci = 0; int ret; @@ -308,7 +310,11 @@ static void msm_request_tx_dma(struct msm_port *msm_port, resource_size_t base) conf.device_fc = true; conf.dst_addr = base + UARTDM_TF; conf.dst_maxburst = UARTDM_BURST_SIZE; - conf.slave_id = crci; + if (crci) { + conf.peripheral_config = &periph_conf; + conf.peripheral_size = sizeof(periph_conf); + periph_conf.crci = crci; + } ret = dmaengine_slave_config(dma->chan, &conf); if (ret) @@ -333,6 +339,7 @@ static void msm_request_rx_dma(struct msm_port *msm_port, resource_size_t base) { struct device *dev = msm_port->uart.dev; struct dma_slave_config conf; + struct qcom_adm_peripheral_config periph_conf = {}; struct msm_dma *dma; u32 crci = 0; int ret; @@ -355,7 +362,11 @@ static void msm_request_rx_dma(struct msm_port *msm_port, resource_size_t base) conf.device_fc = true; conf.src_addr = base + UARTDM_RF; conf.src_maxburst = UARTDM_BURST_SIZE; - conf.slave_id = crci; + if (crci) { + conf.peripheral_config = &periph_conf; + conf.peripheral_size = sizeof(periph_conf); + periph_conf.crci = crci; + } ret = dmaengine_slave_config(dma->chan, &conf); if (ret) diff --git a/include/linux/dma/qcom_adm.h b/include/linux/dma/qcom_adm.h new file mode 100644 index 0000000000000..af20df674f0ce --- /dev/null +++ b/include/linux/dma/qcom_adm.h @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: GPL-2.0-only +#ifndef __LINUX_DMA_QCOM_ADM_H +#define __LINUX_DMA_QCOM_ADM_H + +#include + +struct qcom_adm_peripheral_config { + u32 crci; + u32 mux; +}; + +#endif /* __LINUX_DMA_QCOM_ADM_H */ From 93cdb5b0dc56cc7a8b87a61146495f3bdc93d7ba Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 22 Nov 2021 23:22:01 +0100 Subject: [PATCH 10/22] dmaengine: xilinx_dpdma: stop using slave_id field The display driver wants to pass a custom flag to the DMA engine driver, which it started doing by using the slave_id field that was traditionally used for a different purpose. As there is no longer a correct use for the slave_id field, it should really be removed, and the remaining users changed over to something different. The new mechanism for passing nonstandard settings is using the .peripheral_config field, so use that to pass a newly defined structure here, making it clear that this will not work in portable drivers. Reviewed-by: Laurent Pinchart Signed-off-by: Arnd Bergmann Acked-by: Mark Brown Link: https://lore.kernel.org/r/20211122222203.4103644-10-arnd@kernel.org Signed-off-by: Vinod Koul --- drivers/dma/xilinx/xilinx_dpdma.c | 17 +++++++++++------ drivers/gpu/drm/xlnx/zynqmp_disp.c | 9 +++++++-- include/linux/dma/xilinx_dpdma.h | 11 +++++++++++ 3 files changed, 29 insertions(+), 8 deletions(-) create mode 100644 include/linux/dma/xilinx_dpdma.h diff --git a/drivers/dma/xilinx/xilinx_dpdma.c b/drivers/dma/xilinx/xilinx_dpdma.c index ce5c66e6897d2..b0f4948b00a54 100644 --- a/drivers/dma/xilinx/xilinx_dpdma.c +++ b/drivers/dma/xilinx/xilinx_dpdma.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include #include @@ -1273,6 +1274,7 @@ static int xilinx_dpdma_config(struct dma_chan *dchan, struct dma_slave_config *config) { struct xilinx_dpdma_chan *chan = to_xilinx_chan(dchan); + struct xilinx_dpdma_peripheral_config *pconfig; unsigned long flags; /* @@ -1282,15 +1284,18 @@ static int xilinx_dpdma_config(struct dma_chan *dchan, * fixed both on the DPDMA side and on the DP controller side. */ - spin_lock_irqsave(&chan->lock, flags); - /* - * Abuse the slave_id to indicate that the channel is part of a video - * group. + * Use the peripheral_config to indicate that the channel is part + * of a video group. This requires matching use of the custom + * structure in each driver. */ - if (chan->id <= ZYNQMP_DPDMA_VIDEO2) - chan->video_group = config->slave_id != 0; + pconfig = config->peripheral_config; + if (WARN_ON(pconfig && config->peripheral_size != sizeof(*pconfig))) + return -EINVAL; + spin_lock_irqsave(&chan->lock, flags); + if (chan->id <= ZYNQMP_DPDMA_VIDEO2 && pconfig) + chan->video_group = pconfig->video_group; spin_unlock_irqrestore(&chan->lock, flags); return 0; diff --git a/drivers/gpu/drm/xlnx/zynqmp_disp.c b/drivers/gpu/drm/xlnx/zynqmp_disp.c index ff2b308d86517..11c409cbc88e7 100644 --- a/drivers/gpu/drm/xlnx/zynqmp_disp.c +++ b/drivers/gpu/drm/xlnx/zynqmp_disp.c @@ -24,6 +24,7 @@ #include #include +#include #include #include #include @@ -1058,14 +1059,18 @@ static void zynqmp_disp_layer_set_format(struct zynqmp_disp_layer *layer, zynqmp_disp_avbuf_set_format(layer->disp, layer, layer->disp_fmt); /* - * Set slave_id for each DMA channel to indicate they're part of a + * Set pconfig for each DMA channel to indicate they're part of a * video group. */ for (i = 0; i < info->num_planes; i++) { struct zynqmp_disp_layer_dma *dma = &layer->dmas[i]; + struct xilinx_dpdma_peripheral_config pconfig = { + .video_group = true, + }; struct dma_slave_config config = { .direction = DMA_MEM_TO_DEV, - .slave_id = 1, + .peripheral_config = &pconfig, + .peripheral_size = sizeof(pconfig), }; dmaengine_slave_config(dma->chan, &config); diff --git a/include/linux/dma/xilinx_dpdma.h b/include/linux/dma/xilinx_dpdma.h new file mode 100644 index 0000000000000..83a1377f03f8d --- /dev/null +++ b/include/linux/dma/xilinx_dpdma.h @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0 +#ifndef __LINUX_DMA_XILINX_DPDMA_H +#define __LINUX_DMA_XILINX_DPDMA_H + +#include + +struct xilinx_dpdma_peripheral_config { + bool video_group; +}; + +#endif /* __LINUX_DMA_XILINX_DPDMA_H */ From 3c219644075795a99271d345efdfa8b256e55161 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 22 Nov 2021 23:22:03 +0100 Subject: [PATCH 11/22] dmaengine: remove slave_id config field All references to the slave_id field have been removed, so remove the field as well to prevent new references from creeping in again. Originally this allowed slave DMA drivers to configure which device is accessed with the dmaengine_slave_config() call, but this was inconsistent, as the same information is also passed while requesting a channel, and never changes in practice. In modern kernels, the device is always selected when requesting the channel, so the .slave_id field is no longer useful. Reviewed-by: Laurent Pinchart Signed-off-by: Arnd Bergmann Acked-by: Mark Brown Link: https://lore.kernel.org/r/20211122222203.4103644-12-arnd@kernel.org Signed-off-by: Vinod Koul --- include/linux/dmaengine.h | 4 ---- 1 file changed, 4 deletions(-) diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index 9000f3ffce8b3..0349b35235e6f 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -418,9 +418,6 @@ enum dma_slave_buswidth { * @device_fc: Flow Controller Settings. Only valid for slave channels. Fill * with 'true' if peripheral should be flow controller. Direction will be * selected at Runtime. - * @slave_id: Slave requester id. Only valid for slave channels. The dma - * slave peripheral will have unique id as dma requester which need to be - * pass as slave config. * @peripheral_config: peripheral configuration for programming peripheral * for dmaengine transfer * @peripheral_size: peripheral configuration buffer size @@ -448,7 +445,6 @@ struct dma_slave_config { u32 src_port_window_size; u32 dst_port_window_size; bool device_fc; - unsigned int slave_id; void *peripheral_config; size_t peripheral_size; }; From 46f016119e2ac38d9efd32e4957bc888dc71fffe Mon Sep 17 00:00:00 2001 From: Dmitry Osipenko Date: Sat, 4 Dec 2021 17:37:04 +0300 Subject: [PATCH 12/22] ASoC: dt-bindings: Add binding for Tegra20 S/PDIF Add device-tree binding for Tegra20 S/PDIF controller. Reviewed-by: Rob Herring Signed-off-by: Dmitry Osipenko Acked-by: Thierry Reding Link: https://lore.kernel.org/r/20211204143725.31646-2-digetx@gmail.com Signed-off-by: Mark Brown --- .../bindings/sound/nvidia,tegra20-spdif.yaml | 85 +++++++++++++++++++ 1 file changed, 85 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra20-spdif.yaml diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra20-spdif.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra20-spdif.yaml new file mode 100644 index 0000000000000..60a368a132b8a --- /dev/null +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra20-spdif.yaml @@ -0,0 +1,85 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/nvidia,tegra20-spdif.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra20 S/PDIF Controller + +description: | + The S/PDIF controller supports both input and output in serial audio + digital interface format. The input controller can digitally recover + a clock from the received stream. The S/PDIF controller is also used + to generate the embedded audio for HDMI output channel. + +maintainers: + - Thierry Reding + - Jon Hunter + +properties: + compatible: + const: nvidia,tegra20-spdif + + reg: + maxItems: 1 + + resets: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 2 + + clock-names: + items: + - const: out + - const: in + + dmas: + minItems: 2 + + dma-names: + items: + - const: rx + - const: tx + + "#sound-dai-cells": + const: 0 + + nvidia,fixed-parent-rate: + description: | + Specifies whether board prefers parent clock to stay at a fixed rate. + This allows multiple Tegra20 audio components work simultaneously by + limiting number of supportable audio rates. + type: boolean + +required: + - compatible + - reg + - resets + - interrupts + - clocks + - clock-names + - dmas + - dma-names + - "#sound-dai-cells" + +additionalProperties: false + +examples: + - | + spdif@70002400 { + compatible = "nvidia,tegra20-spdif"; + reg = <0x70002400 0x200>; + interrupts = <77>; + clocks = <&clk 99>, <&clk 98>; + clock-names = "out", "in"; + resets = <&rst 10>; + dmas = <&apbdma 3>, <&apbdma 3>; + dma-names = "rx", "tx"; + #sound-dai-cells = <0>; + }; + +... From 80c3d0a97abfd2a678b6077236a77ccb8c4747fa Mon Sep 17 00:00:00 2001 From: Dmitry Osipenko Date: Sat, 4 Dec 2021 17:37:05 +0300 Subject: [PATCH 13/22] ASoC: dt-bindings: tegra20-i2s: Convert to schema Convert NVIDIA Tegra20 I2S binding to schema. Reviewed-by: Rob Herring Signed-off-by: Dmitry Osipenko Acked-by: Thierry Reding Link: https://lore.kernel.org/r/20211204143725.31646-3-digetx@gmail.com Signed-off-by: Mark Brown --- .../bindings/sound/nvidia,tegra20-i2s.txt | 30 -------- .../bindings/sound/nvidia,tegra20-i2s.yaml | 70 +++++++++++++++++++ 2 files changed, 70 insertions(+), 30 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.txt create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.yaml diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.txt deleted file mode 100644 index dc30c6bfbe95f..0000000000000 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.txt +++ /dev/null @@ -1,30 +0,0 @@ -NVIDIA Tegra 20 I2S controller - -Required properties: -- compatible : "nvidia,tegra20-i2s" -- reg : Should contain I2S registers location and length -- interrupts : Should contain I2S interrupt -- resets : Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. -- reset-names : Must include the following entries: - - i2s -- dmas : Must contain an entry for each entry in clock-names. - See ../dma/dma.txt for details. -- dma-names : Must include the following entries: - - rx - - tx -- clocks : Must contain one entry, for the module clock. - See ../clocks/clock-bindings.txt for details. - -Example: - -i2s@70002800 { - compatible = "nvidia,tegra20-i2s"; - reg = <0x70002800 0x200>; - interrupts = < 45 >; - clocks = <&tegra_car 11>; - resets = <&tegra_car 11>; - reset-names = "i2s"; - dmas = <&apbdma 21>, <&apbdma 21>; - dma-names = "rx", "tx"; -}; diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.yaml new file mode 100644 index 0000000000000..ad43b237d9aff --- /dev/null +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/nvidia,tegra20-i2s.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra20 I2S Controller + +description: | + The I2S Controller streams synchronous serial audio data between system + memory and an external audio device. The controller supports the I2S Left + Justified Mode, Right Justified Mode, and DSP mode formats. + +maintainers: + - Thierry Reding + - Jon Hunter + +properties: + compatible: + const: nvidia,tegra20-i2s + + reg: + maxItems: 1 + + resets: + maxItems: 1 + + reset-names: + const: i2s + + interrupts: + maxItems: 1 + + clocks: + minItems: 1 + + dmas: + minItems: 2 + + dma-names: + items: + - const: rx + - const: tx + +required: + - compatible + - reg + - resets + - reset-names + - interrupts + - clocks + - dmas + - dma-names + +additionalProperties: false + +examples: + - | + i2s@70002800 { + compatible = "nvidia,tegra20-i2s"; + reg = <0x70002800 0x200>; + interrupts = <45>; + clocks = <&tegra_car 11>; + resets = <&tegra_car 11>; + reset-names = "i2s"; + dmas = <&apbdma 21>, <&apbdma 21>; + dma-names = "rx", "tx"; + }; + +... From 549818e5c85a6d806cdef146d0203df2689d4e2f Mon Sep 17 00:00:00 2001 From: Dmitry Osipenko Date: Sat, 4 Dec 2021 17:37:06 +0300 Subject: [PATCH 14/22] ASoC: dt-bindings: tegra20-i2s: Document new nvidia,fixed-parent-rate property Document new nvidia,fixed-parent-rate property which instructs that this board wants parent clock to stay at a fixed rate. It allows to prevent conflicts between audio components that share same parent PLL. For instance, this property allows to have HDMI audio, speaker and headphones in the system playing audio simultaneously, which is a common pattern for consumer devices. Reviewed-by: Rob Herring Signed-off-by: Dmitry Osipenko Link: https://lore.kernel.org/r/20211204143725.31646-4-digetx@gmail.com Signed-off-by: Mark Brown --- .../devicetree/bindings/sound/nvidia,tegra20-i2s.yaml | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.yaml index ad43b237d9aff..68ae124eaf804 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.yaml @@ -42,6 +42,13 @@ properties: - const: rx - const: tx + nvidia,fixed-parent-rate: + description: | + Specifies whether board prefers parent clock to stay at a fixed rate. + This allows multiple Tegra20 audio components work simultaneously by + limiting number of supportable audio rates. + type: boolean + required: - compatible - reg From 16736a0221db6d6f3fe130750c6dc5bbf5417da4 Mon Sep 17 00:00:00 2001 From: Dmitry Osipenko Date: Sat, 4 Dec 2021 17:37:08 +0300 Subject: [PATCH 15/22] ASoC: tegra20: spdif: Set FIFO trigger level FIFO trigger level must be not less than the size of DMA burst, otherwise audio will be played x4 faster that it should be because part of the DMA data will be dropped on FIFO input buffer overflow. Signed-off-by: Dmitry Osipenko Acked-by: Thierry Reding Link: https://lore.kernel.org/r/20211204143725.31646-6-digetx@gmail.com Signed-off-by: Mark Brown --- sound/soc/tegra/tegra20_spdif.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/sound/soc/tegra/tegra20_spdif.c b/sound/soc/tegra/tegra20_spdif.c index 57a6c576b91f5..e45e371edc427 100644 --- a/sound/soc/tegra/tegra20_spdif.c +++ b/sound/soc/tegra/tegra20_spdif.c @@ -69,6 +69,14 @@ static int tegra20_spdif_hw_params(struct snd_pcm_substream *substream, regmap_update_bits(spdif->regmap, TEGRA20_SPDIF_CTRL, mask, val); + /* + * FIFO trigger level must be bigger than DMA burst or equal to it, + * otherwise data is discarded on overflow. + */ + regmap_update_bits(spdif->regmap, TEGRA20_SPDIF_DATA_FIFO_CSR, + TEGRA20_SPDIF_DATA_FIFO_CSR_TX_ATN_LVL_MASK, + TEGRA20_SPDIF_DATA_FIFO_CSR_TX_ATN_LVL_TU4_WORD_FULL); + switch (params_rate(params)) { case 32000: spdifclock = 4096000; From c0000fc618cdbe190274cf37040033dfa23c159d Mon Sep 17 00:00:00 2001 From: Dmitry Osipenko Date: Sat, 4 Dec 2021 17:37:10 +0300 Subject: [PATCH 16/22] ASoC: tegra20: spdif: Support device-tree Tegra20 S/PDIF driver was added in a pre-DT era and was never used since that time. Revive driver by adding device-tree support. Signed-off-by: Dmitry Osipenko Acked-by: Thierry Reding Link: https://lore.kernel.org/r/20211204143725.31646-8-digetx@gmail.com Signed-off-by: Mark Brown --- sound/soc/tegra/tegra20_spdif.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/sound/soc/tegra/tegra20_spdif.c b/sound/soc/tegra/tegra20_spdif.c index e45e371edc427..801784915004d 100644 --- a/sound/soc/tegra/tegra20_spdif.c +++ b/sound/soc/tegra/tegra20_spdif.c @@ -10,6 +10,7 @@ #include #include #include +#include #include #include #include @@ -270,7 +271,7 @@ static int tegra20_spdif_platform_probe(struct platform_device *pdev) dev_set_drvdata(&pdev->dev, spdif); - spdif->clk_spdif_out = devm_clk_get(&pdev->dev, "spdif_out"); + spdif->clk_spdif_out = devm_clk_get(&pdev->dev, "out"); if (IS_ERR(spdif->clk_spdif_out)) { pr_err("Can't retrieve spdif clock\n"); ret = PTR_ERR(spdif->clk_spdif_out); @@ -340,10 +341,17 @@ static const struct dev_pm_ops tegra20_spdif_pm_ops = { tegra20_spdif_runtime_resume, NULL) }; +static const struct of_device_id tegra20_spdif_of_match[] = { + { .compatible = "nvidia,tegra20-spdif", }, + {}, +}; +MODULE_DEVICE_TABLE(of, tegra20_spdif_of_match); + static struct platform_driver tegra20_spdif_driver = { .driver = { .name = DRV_NAME, .pm = &tegra20_spdif_pm_ops, + .of_match_table = tegra20_spdif_of_match, }, .probe = tegra20_spdif_platform_probe, .remove = tegra20_spdif_platform_remove, @@ -354,4 +362,3 @@ module_platform_driver(tegra20_spdif_driver); MODULE_AUTHOR("Stephen Warren "); MODULE_DESCRIPTION("Tegra20 SPDIF ASoC driver"); MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:" DRV_NAME); From 117aeed43974e500dcbd106e51218a83ae2c9977 Mon Sep 17 00:00:00 2001 From: Dmitry Osipenko Date: Sat, 4 Dec 2021 17:37:11 +0300 Subject: [PATCH 17/22] ASoC: tegra20: spdif: Improve driver's code - Clean up whitespaces, defines and variables. - Remove obsolete code. - Adhere to upstream coding style. - Don't override returned error code. - Replace pr_err with dev_err. No functional changes are made by this patch. This is a minor code's refactoring that will ease further maintenance of the driver. Signed-off-by: Dmitry Osipenko Acked-by: Thierry Reding Link: https://lore.kernel.org/r/20211204143725.31646-9-digetx@gmail.com Signed-off-by: Mark Brown --- sound/soc/tegra/tegra20_spdif.c | 49 ++++++++++++--------------------- 1 file changed, 18 insertions(+), 31 deletions(-) diff --git a/sound/soc/tegra/tegra20_spdif.c b/sound/soc/tegra/tegra20_spdif.c index 801784915004d..d5c618611dbb3 100644 --- a/sound/soc/tegra/tegra20_spdif.c +++ b/sound/soc/tegra/tegra20_spdif.c @@ -23,8 +23,6 @@ #include "tegra20_spdif.h" -#define DRV_NAME "tegra20-spdif" - static __maybe_unused int tegra20_spdif_runtime_suspend(struct device *dev) { struct tegra20_spdif *spdif = dev_get_drvdata(dev); @@ -49,11 +47,10 @@ static __maybe_unused int tegra20_spdif_runtime_resume(struct device *dev) } static int tegra20_spdif_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params, - struct snd_soc_dai *dai) + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) { - struct device *dev = dai->dev; - struct tegra20_spdif *spdif = snd_soc_dai_get_drvdata(dai); + struct tegra20_spdif *spdif = dev_get_drvdata(dai->dev); unsigned int mask = 0, val = 0; int ret, spdifclock; @@ -106,7 +103,7 @@ static int tegra20_spdif_hw_params(struct snd_pcm_substream *substream, ret = clk_set_rate(spdif->clk_spdif_out, spdifclock); if (ret) { - dev_err(dev, "Can't set SPDIF clock rate: %d\n", ret); + dev_err(dai->dev, "Can't set SPDIF clock rate: %d\n", ret); return ret; } @@ -127,9 +124,9 @@ static void tegra20_spdif_stop_playback(struct tegra20_spdif *spdif) } static int tegra20_spdif_trigger(struct snd_pcm_substream *substream, int cmd, - struct snd_soc_dai *dai) + struct snd_soc_dai *dai) { - struct tegra20_spdif *spdif = snd_soc_dai_get_drvdata(dai); + struct tegra20_spdif *spdif = dev_get_drvdata(dai->dev); switch (cmd) { case SNDRV_PCM_TRIGGER_START: @@ -151,7 +148,7 @@ static int tegra20_spdif_trigger(struct snd_pcm_substream *substream, int cmd, static int tegra20_spdif_probe(struct snd_soc_dai *dai) { - struct tegra20_spdif *spdif = snd_soc_dai_get_drvdata(dai); + struct tegra20_spdif *spdif = dev_get_drvdata(dai->dev); dai->capture_dma_data = NULL; dai->playback_dma_data = &spdif->playback_dma_data; @@ -160,26 +157,26 @@ static int tegra20_spdif_probe(struct snd_soc_dai *dai) } static const struct snd_soc_dai_ops tegra20_spdif_dai_ops = { - .hw_params = tegra20_spdif_hw_params, - .trigger = tegra20_spdif_trigger, + .hw_params = tegra20_spdif_hw_params, + .trigger = tegra20_spdif_trigger, }; static struct snd_soc_dai_driver tegra20_spdif_dai = { - .name = DRV_NAME, + .name = "tegra20-spdif", .probe = tegra20_spdif_probe, .playback = { .stream_name = "Playback", .channels_min = 2, .channels_max = 2, .rates = SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | - SNDRV_PCM_RATE_48000, + SNDRV_PCM_RATE_48000, .formats = SNDRV_PCM_FMTBIT_S16_LE, }, .ops = &tegra20_spdif_dai_ops, }; static const struct snd_soc_component_driver tegra20_spdif_component = { - .name = DRV_NAME, + .name = "tegra20-spdif", }; static bool tegra20_spdif_wr_rd_reg(struct device *dev, unsigned int reg) @@ -260,7 +257,7 @@ static const struct regmap_config tegra20_spdif_regmap_config = { static int tegra20_spdif_platform_probe(struct platform_device *pdev) { struct tegra20_spdif *spdif; - struct resource *mem, *dmareq; + struct resource *mem; void __iomem *regs; int ret; @@ -273,27 +270,19 @@ static int tegra20_spdif_platform_probe(struct platform_device *pdev) spdif->clk_spdif_out = devm_clk_get(&pdev->dev, "out"); if (IS_ERR(spdif->clk_spdif_out)) { - pr_err("Can't retrieve spdif clock\n"); - ret = PTR_ERR(spdif->clk_spdif_out); - return ret; + dev_err(&pdev->dev, "Could not retrieve spdif clock\n"); + return PTR_ERR(spdif->clk_spdif_out); } regs = devm_platform_get_and_ioremap_resource(pdev, 0, &mem); if (IS_ERR(regs)) return PTR_ERR(regs); - dmareq = platform_get_resource(pdev, IORESOURCE_DMA, 0); - if (!dmareq) { - dev_err(&pdev->dev, "No DMA resource\n"); - return -ENODEV; - } - spdif->regmap = devm_regmap_init_mmio(&pdev->dev, regs, - &tegra20_spdif_regmap_config); + &tegra20_spdif_regmap_config); if (IS_ERR(spdif->regmap)) { dev_err(&pdev->dev, "regmap init failed\n"); - ret = PTR_ERR(spdif->regmap); - return ret; + return PTR_ERR(spdif->regmap); } spdif->playback_dma_data.addr = mem->start + TEGRA20_SPDIF_DATA_OUT; @@ -306,7 +295,6 @@ static int tegra20_spdif_platform_probe(struct platform_device *pdev) &tegra20_spdif_dai, 1); if (ret) { dev_err(&pdev->dev, "Could not register DAI: %d\n", ret); - ret = -ENOMEM; goto err_pm_disable; } @@ -349,14 +337,13 @@ MODULE_DEVICE_TABLE(of, tegra20_spdif_of_match); static struct platform_driver tegra20_spdif_driver = { .driver = { - .name = DRV_NAME, + .name = "tegra20-spdif", .pm = &tegra20_spdif_pm_ops, .of_match_table = tegra20_spdif_of_match, }, .probe = tegra20_spdif_platform_probe, .remove = tegra20_spdif_platform_remove, }; - module_platform_driver(tegra20_spdif_driver); MODULE_AUTHOR("Stephen Warren "); From 150f4d573fe19a77864f6dec31aa444332f9fc9e Mon Sep 17 00:00:00 2001 From: Dmitry Osipenko Date: Sat, 4 Dec 2021 17:37:12 +0300 Subject: [PATCH 18/22] ASoC: tegra20: spdif: Use more resource-managed helpers Use resource-managed helpers to make code cleaner. Driver's remove callback isn't needed anymore since driver is completely resource-managed now. Signed-off-by: Dmitry Osipenko Acked-by: Thierry Reding Link: https://lore.kernel.org/r/20211204143725.31646-10-digetx@gmail.com Signed-off-by: Mark Brown --- sound/soc/tegra/tegra20_spdif.c | 33 +++++++++------------------------ sound/soc/tegra/tegra_pcm.c | 6 ++++++ sound/soc/tegra/tegra_pcm.h | 1 + 3 files changed, 16 insertions(+), 24 deletions(-) diff --git a/sound/soc/tegra/tegra20_spdif.c b/sound/soc/tegra/tegra20_spdif.c index d5c618611dbb3..7dd263721c2c0 100644 --- a/sound/soc/tegra/tegra20_spdif.c +++ b/sound/soc/tegra/tegra20_spdif.c @@ -289,38 +289,24 @@ static int tegra20_spdif_platform_probe(struct platform_device *pdev) spdif->playback_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; spdif->playback_dma_data.maxburst = 4; - pm_runtime_enable(&pdev->dev); + ret = devm_pm_runtime_enable(&pdev->dev); + if (ret) + return ret; - ret = snd_soc_register_component(&pdev->dev, &tegra20_spdif_component, - &tegra20_spdif_dai, 1); + ret = devm_snd_soc_register_component(&pdev->dev, + &tegra20_spdif_component, + &tegra20_spdif_dai, 1); if (ret) { dev_err(&pdev->dev, "Could not register DAI: %d\n", ret); - goto err_pm_disable; + return ret; } - ret = tegra_pcm_platform_register(&pdev->dev); + ret = devm_tegra_pcm_platform_register(&pdev->dev); if (ret) { dev_err(&pdev->dev, "Could not register PCM: %d\n", ret); - goto err_unregister_component; + return ret; } - return 0; - -err_unregister_component: - snd_soc_unregister_component(&pdev->dev); -err_pm_disable: - pm_runtime_disable(&pdev->dev); - - return ret; -} - -static int tegra20_spdif_platform_remove(struct platform_device *pdev) -{ - tegra_pcm_platform_unregister(&pdev->dev); - snd_soc_unregister_component(&pdev->dev); - - pm_runtime_disable(&pdev->dev); - return 0; } @@ -342,7 +328,6 @@ static struct platform_driver tegra20_spdif_driver = { .of_match_table = tegra20_spdif_of_match, }, .probe = tegra20_spdif_platform_probe, - .remove = tegra20_spdif_platform_remove, }; module_platform_driver(tegra20_spdif_driver); diff --git a/sound/soc/tegra/tegra_pcm.c b/sound/soc/tegra/tegra_pcm.c index ef1e74d952369..468c8e77de217 100644 --- a/sound/soc/tegra/tegra_pcm.c +++ b/sound/soc/tegra/tegra_pcm.c @@ -48,6 +48,12 @@ int tegra_pcm_platform_register(struct device *dev) } EXPORT_SYMBOL_GPL(tegra_pcm_platform_register); +int devm_tegra_pcm_platform_register(struct device *dev) +{ + return devm_snd_dmaengine_pcm_register(dev, &tegra_dmaengine_pcm_config, 0); +} +EXPORT_SYMBOL_GPL(devm_tegra_pcm_platform_register); + int tegra_pcm_platform_register_with_chan_names(struct device *dev, struct snd_dmaengine_pcm_config *config, char *txdmachan, char *rxdmachan) diff --git a/sound/soc/tegra/tegra_pcm.h b/sound/soc/tegra/tegra_pcm.h index d602126c65b7b..2a36eea1740dd 100644 --- a/sound/soc/tegra/tegra_pcm.h +++ b/sound/soc/tegra/tegra_pcm.h @@ -32,6 +32,7 @@ int tegra_pcm_hw_params(struct snd_soc_component *component, snd_pcm_uframes_t tegra_pcm_pointer(struct snd_soc_component *component, struct snd_pcm_substream *substream); int tegra_pcm_platform_register(struct device *dev); +int devm_tegra_pcm_platform_register(struct device *dev); int tegra_pcm_platform_register_with_chan_names(struct device *dev, struct snd_dmaengine_pcm_config *config, char *txdmachan, char *rxdmachan); From ec1b4545d75575118e01a5e95699cff5010b4e19 Mon Sep 17 00:00:00 2001 From: Dmitry Osipenko Date: Sat, 4 Dec 2021 17:37:13 +0300 Subject: [PATCH 19/22] ASoC: tegra20: spdif: Reset hardware Reset S/PDIF controller on runtime PM suspend/resume to ensure that we always have a consistent hardware state. Signed-off-by: Dmitry Osipenko Acked-by: Thierry Reding Link: https://lore.kernel.org/r/20211204143725.31646-11-digetx@gmail.com Signed-off-by: Mark Brown --- sound/soc/tegra/tegra20_spdif.c | 32 ++++++++++++++++++++++++++++++++ sound/soc/tegra/tegra20_spdif.h | 1 + 2 files changed, 33 insertions(+) diff --git a/sound/soc/tegra/tegra20_spdif.c b/sound/soc/tegra/tegra20_spdif.c index 7dd263721c2c0..bc45a0a8afab8 100644 --- a/sound/soc/tegra/tegra20_spdif.c +++ b/sound/soc/tegra/tegra20_spdif.c @@ -7,6 +7,7 @@ */ #include +#include #include #include #include @@ -14,6 +15,7 @@ #include #include #include +#include #include #include #include @@ -27,6 +29,8 @@ static __maybe_unused int tegra20_spdif_runtime_suspend(struct device *dev) { struct tegra20_spdif *spdif = dev_get_drvdata(dev); + regcache_cache_only(spdif->regmap, true); + clk_disable_unprepare(spdif->clk_spdif_out); return 0; @@ -37,13 +41,35 @@ static __maybe_unused int tegra20_spdif_runtime_resume(struct device *dev) struct tegra20_spdif *spdif = dev_get_drvdata(dev); int ret; + ret = reset_control_assert(spdif->reset); + if (ret) + return ret; + ret = clk_prepare_enable(spdif->clk_spdif_out); if (ret) { dev_err(dev, "clk_enable failed: %d\n", ret); return ret; } + usleep_range(10, 100); + + ret = reset_control_deassert(spdif->reset); + if (ret) + goto disable_clocks; + + regcache_cache_only(spdif->regmap, false); + regcache_mark_dirty(spdif->regmap); + + ret = regcache_sync(spdif->regmap); + if (ret) + goto disable_clocks; + return 0; + +disable_clocks: + clk_disable_unprepare(spdif->clk_spdif_out); + + return ret; } static int tegra20_spdif_hw_params(struct snd_pcm_substream *substream, @@ -268,6 +294,12 @@ static int tegra20_spdif_platform_probe(struct platform_device *pdev) dev_set_drvdata(&pdev->dev, spdif); + spdif->reset = devm_reset_control_get_exclusive(&pdev->dev, NULL); + if (IS_ERR(spdif->reset)) { + dev_err(&pdev->dev, "Can't retrieve spdif reset\n"); + return PTR_ERR(spdif->reset); + } + spdif->clk_spdif_out = devm_clk_get(&pdev->dev, "out"); if (IS_ERR(spdif->clk_spdif_out)) { dev_err(&pdev->dev, "Could not retrieve spdif clock\n"); diff --git a/sound/soc/tegra/tegra20_spdif.h b/sound/soc/tegra/tegra20_spdif.h index 1973ffc2d5c7e..ff4b79e2052fc 100644 --- a/sound/soc/tegra/tegra20_spdif.h +++ b/sound/soc/tegra/tegra20_spdif.h @@ -451,6 +451,7 @@ struct tegra20_spdif { struct snd_dmaengine_dai_dma_data capture_dma_data; struct snd_dmaengine_dai_dma_data playback_dma_data; struct regmap *regmap; + struct reset_control *reset; }; #endif From d51693092ecc732fca3f49549cde1c5206331b09 Mon Sep 17 00:00:00 2001 From: Dmitry Osipenko Date: Sat, 4 Dec 2021 17:37:14 +0300 Subject: [PATCH 20/22] ASoC: tegra20: spdif: Support system suspend Support system suspend by enforcing runtime PM suspend/resume. Now there is no doubt that h/w is indeed stopped during suspend and that h/w state will be properly restored after resume. Signed-off-by: Dmitry Osipenko Acked-by: Thierry Reding Link: https://lore.kernel.org/r/20211204143725.31646-12-digetx@gmail.com Signed-off-by: Mark Brown --- sound/soc/tegra/tegra20_spdif.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/soc/tegra/tegra20_spdif.c b/sound/soc/tegra/tegra20_spdif.c index bc45a0a8afab8..a4aa5614aef40 100644 --- a/sound/soc/tegra/tegra20_spdif.c +++ b/sound/soc/tegra/tegra20_spdif.c @@ -345,6 +345,8 @@ static int tegra20_spdif_platform_probe(struct platform_device *pdev) static const struct dev_pm_ops tegra20_spdif_pm_ops = { SET_RUNTIME_PM_OPS(tegra20_spdif_runtime_suspend, tegra20_spdif_runtime_resume, NULL) + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, + pm_runtime_force_resume) }; static const struct of_device_id tegra20_spdif_of_match[] = { From 9d8f51cd1fa993939db02a014d4f4b6e252c2a18 Mon Sep 17 00:00:00 2001 From: Dmitry Osipenko Date: Sat, 4 Dec 2021 17:37:15 +0300 Subject: [PATCH 21/22] ASoC: tegra20: spdif: Filter out unsupported rates SPDIF and other SoC components share audio PLL on Tegra, thus only one component may set the desired base clock rate. This creates problem for HDMI audio because it uses SPDIF and audio may not work if SPDIF's clock doesn't exactly match standard audio rate since some receivers may reject audio in that case. Filter out audio rates which SPDIF output can't support, assuming that other components won't change rate at runtime. Signed-off-by: Dmitry Osipenko Acked-by: Thierry Reding Link: https://lore.kernel.org/r/20211204143725.31646-13-digetx@gmail.com Signed-off-by: Mark Brown --- sound/soc/tegra/tegra20_spdif.c | 61 +++++++++++++++++++++++++++++++++ 1 file changed, 61 insertions(+) diff --git a/sound/soc/tegra/tegra20_spdif.c b/sound/soc/tegra/tegra20_spdif.c index a4aa5614aef40..d09cd7ee6879d 100644 --- a/sound/soc/tegra/tegra20_spdif.c +++ b/sound/soc/tegra/tegra20_spdif.c @@ -79,6 +79,7 @@ static int tegra20_spdif_hw_params(struct snd_pcm_substream *substream, struct tegra20_spdif *spdif = dev_get_drvdata(dai->dev); unsigned int mask = 0, val = 0; int ret, spdifclock; + long rate; mask |= TEGRA20_SPDIF_CTRL_PACK | TEGRA20_SPDIF_CTRL_BIT_MODE_MASK; @@ -133,6 +134,12 @@ static int tegra20_spdif_hw_params(struct snd_pcm_substream *substream, return ret; } + rate = clk_get_rate(spdif->clk_spdif_out); + if (rate != spdifclock) + dev_warn_once(dai->dev, + "SPDIF clock rate %d doesn't match requested rate %lu\n", + spdifclock, rate); + return 0; } @@ -172,6 +179,59 @@ static int tegra20_spdif_trigger(struct snd_pcm_substream *substream, int cmd, return 0; } +static int tegra20_spdif_filter_rates(struct snd_pcm_hw_params *params, + struct snd_pcm_hw_rule *rule) +{ + struct snd_interval *r = hw_param_interval(params, rule->var); + struct snd_soc_dai *dai = rule->private; + struct tegra20_spdif *spdif = dev_get_drvdata(dai->dev); + struct clk *parent = clk_get_parent(spdif->clk_spdif_out); + const unsigned int rates[] = { 32000, 44100, 48000 }; + long i, parent_rate, valid_rates = 0; + + parent_rate = clk_get_rate(parent); + if (parent_rate <= 0) { + dev_err(dai->dev, "Can't get parent clock rate: %ld\n", + parent_rate); + return parent_rate ?: -EINVAL; + } + + for (i = 0; i < ARRAY_SIZE(rates); i++) { + if (parent_rate % (rates[i] * 128) == 0) + valid_rates |= BIT(i); + } + + /* + * At least one rate must be valid, otherwise the parent clock isn't + * audio PLL. Nothing should be filtered in this case. + */ + if (!valid_rates) + valid_rates = BIT(ARRAY_SIZE(rates)) - 1; + + return snd_interval_list(r, ARRAY_SIZE(rates), rates, valid_rates); +} + +static int tegra20_spdif_startup(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + if (!device_property_read_bool(dai->dev, "nvidia,fixed-parent-rate")) + return 0; + + /* + * SPDIF and I2S share audio PLL. HDMI takes audio packets from SPDIF + * and audio may not work on some TVs if clock rate isn't precise. + * + * PLL rate is controlled by I2S side. Filter out audio rates that + * don't match PLL rate at the start of stream to allow both SPDIF + * and I2S work simultaneously, assuming that PLL rate won't be + * changed later on. + */ + return snd_pcm_hw_rule_add(substream->runtime, 0, + SNDRV_PCM_HW_PARAM_RATE, + tegra20_spdif_filter_rates, dai, + SNDRV_PCM_HW_PARAM_RATE, -1); +} + static int tegra20_spdif_probe(struct snd_soc_dai *dai) { struct tegra20_spdif *spdif = dev_get_drvdata(dai->dev); @@ -185,6 +245,7 @@ static int tegra20_spdif_probe(struct snd_soc_dai *dai) static const struct snd_soc_dai_ops tegra20_spdif_dai_ops = { .hw_params = tegra20_spdif_hw_params, .trigger = tegra20_spdif_trigger, + .startup = tegra20_spdif_startup, }; static struct snd_soc_dai_driver tegra20_spdif_dai = { From bfa4671db1effe315cade5bddd6cf025e1c403d0 Mon Sep 17 00:00:00 2001 From: Dmitry Osipenko Date: Sat, 4 Dec 2021 17:37:16 +0300 Subject: [PATCH 22/22] ASoC: tegra20: i2s: Filter out unsupported rates Support new nvidia,fixed-parent-rate device-tree property which instructs I2S that board wants parent clock rate to stay at a fixed rate. This allows to play audio over S/PDIF and I2S simultaneously. The root of the problem is that audio components on Tegra share the same audio PLL, and thus, only a subset of rates can be supported if we want to play audio simultaneously. Filter out audio rates that don't match parent clock rate if device-tree has the nvidia,fixed-parent-rate property. Signed-off-by: Dmitry Osipenko Acked-by: Thierry Reding Link: https://lore.kernel.org/r/20211204143725.31646-14-digetx@gmail.com Signed-off-by: Mark Brown --- sound/soc/tegra/tegra20_i2s.c | 49 +++++++++++++++++++++++++++++++++++ 1 file changed, 49 insertions(+) diff --git a/sound/soc/tegra/tegra20_i2s.c b/sound/soc/tegra/tegra20_i2s.c index 266d2cab9f495..27365a877e471 100644 --- a/sound/soc/tegra/tegra20_i2s.c +++ b/sound/soc/tegra/tegra20_i2s.c @@ -262,10 +262,59 @@ static int tegra20_i2s_probe(struct snd_soc_dai *dai) return 0; } +static const unsigned int tegra20_i2s_rates[] = { + 8000, 11025, 16000, 22050, 32000, 44100, 48000, 64000, 88200, 96000 +}; + +static int tegra20_i2s_filter_rates(struct snd_pcm_hw_params *params, + struct snd_pcm_hw_rule *rule) +{ + struct snd_interval *r = hw_param_interval(params, rule->var); + struct snd_soc_dai *dai = rule->private; + struct tegra20_i2s *i2s = dev_get_drvdata(dai->dev); + struct clk *parent = clk_get_parent(i2s->clk_i2s); + long i, parent_rate, valid_rates = 0; + + parent_rate = clk_get_rate(parent); + if (parent_rate <= 0) { + dev_err(dai->dev, "Can't get parent clock rate: %ld\n", + parent_rate); + return parent_rate ?: -EINVAL; + } + + for (i = 0; i < ARRAY_SIZE(tegra20_i2s_rates); i++) { + if (parent_rate % (tegra20_i2s_rates[i] * 128) == 0) + valid_rates |= BIT(i); + } + + /* + * At least one rate must be valid, otherwise the parent clock isn't + * audio PLL. Nothing should be filtered in this case. + */ + if (!valid_rates) + valid_rates = BIT(ARRAY_SIZE(tegra20_i2s_rates)) - 1; + + return snd_interval_list(r, ARRAY_SIZE(tegra20_i2s_rates), + tegra20_i2s_rates, valid_rates); +} + +static int tegra20_i2s_startup(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + if (!device_property_read_bool(dai->dev, "nvidia,fixed-parent-rate")) + return 0; + + return snd_pcm_hw_rule_add(substream->runtime, 0, + SNDRV_PCM_HW_PARAM_RATE, + tegra20_i2s_filter_rates, dai, + SNDRV_PCM_HW_PARAM_RATE, -1); +} + static const struct snd_soc_dai_ops tegra20_i2s_dai_ops = { .set_fmt = tegra20_i2s_set_fmt, .hw_params = tegra20_i2s_hw_params, .trigger = tegra20_i2s_trigger, + .startup = tegra20_i2s_startup, }; static const struct snd_soc_dai_driver tegra20_i2s_dai_template = {