HID: stop drivers from selecting CONFIG_HID

There is a mix of drivers using either 'depends on HID' or 'select HID',
which causes both circular dependencies and missed dependencies for
a 'select':

WARNING: unment direct dependencies for HID
  Depends on [m]: HID_SUPPORT [=y] && INPUT [=m]
  Selected by [y]:
  - AMD_SFH_HID [=y] && HID_SUPPORT [=y] && (X86_64 || COMPILE_TEST [=y]) && PCI [=y]
  Selected by [m]:
  - I2C_HID_CORE [=m] && HID_SUPPORT [=y]

WARNING: unmet direct dependencies detected for INPUT_FF_MEMLESS
  Depends on [m]: INPUT [=m]
  Selected by [y]:
  - DRAGONRISE_FF [=y] && HID_SUPPORT [=y] && HID [=y] && HID_DRAGONRISE [=y]
  - HID_MICROSOFT [=y] && HID_SUPPORT [=y] && HID [=y]
  - GREENASIA_FF [=y] && HID_SUPPORT [=y] && HID [=y] && HID_GREENASIA [=y]
  Selected by [m]:
  - INPUT_ARIZONA_HAPTICS [=m] && INPUT [=m] && INPUT_MISC [=y] && MFD_ARIZONA [=y] && SND_SOC [=m]
  - INPUT_PM8XXX_VIBRATOR [=m] && INPUT [=m] && INPUT_MISC [=y] && (MFD_PM8XXX [=m] || MFD_SPMI_PMIC [=n])
  - INPUT_MAX8997_HAPTIC [=m] && INPUT [=m] && INPUT_MISC [=y] && PWM [=y] && MFD_MAX8997 [=y]
  - INPUT_GPIO_VIBRA [=m] && INPUT [=m] && INPUT_MISC [=y] && (GPIOLIB [=y] || COMPILE_TEST [=y])
  - INPUT_REGULATOR_HAPTIC [=m] && INPUT [=m] && INPUT_MISC [=y] && REGULATOR [=y]
  - INPUT_TWL6040_VIBRA [=m] && INPUT [=m] && INPUT_MISC [=y] && TWL6040_CORE [=y]
  - INPUT_PWM_VIBRA [=m] && INPUT [=m] && INPUT_MISC [=y] && PWM [=y]
  - INPUT_DRV260X_HAPTICS [=m] && INPUT_MISC [=y] && INPUT [=m] && I2C [=y] && (GPIOLIB [=y] || COMPILE_TEST [=y])
  - INPUT_DRV2665_HAPTICS [=m] && INPUT_MISC [=y] && INPUT [=m] && I2C [=y]
  - INPUT_DRV2667_HAPTICS [=m] && INPUT_MISC [=y] && INPUT [=m] && I2C [=y]
  - INPUT_SC27XX_VIBRA [=m] && INPUT [=m] && INPUT_MISC [=y] && (MFD_SC27XX_PMIC [=y] || COMPILE_TEST [=y])
  - HID_MAYFLASH [=m] && HID_SUPPORT [=y] && HID [=y]

Avoid this by changing all HID client drivers to use 'depends on HID'.
For I2C_HID, this requires a larger rework of the Kconfig description,
but it hopefully becomes easier to understand without the complex
I2C_HID_CORE definition.

Fixes: 25621bc ("HID: Kconfig: split HID support and hid-core compilation")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

drivers/hid/amd-sfh-hid/Kconfig

@@ -5,7 +5,7 @@ menu "AMD SFH HID Support"
 
 config AMD_SFH_HID
 	tristate "AMD Sensor Fusion Hub"
-	select HID
+	depends on HID
 	help
 	  If you say yes to this option, support will be included for the
 	  AMD Sensor Fusion Hub.

drivers/hid/i2c-hid/Kconfig

@@ -1,11 +1,15 @@
 # SPDX-License-Identifier: GPL-2.0-only
-menu "I2C HID support"
-	depends on I2C
+menuconfig I2C_HID
+	tristate "I2C HID support"
+	default y
+	depends on I2C && INPUT && HID
+
+if I2C_HID
 
 config I2C_HID_ACPI
 	tristate "HID over I2C transport layer ACPI driver"
-	default n
-	depends on I2C && INPUT && ACPI
+	depends on ACPI
+	select I2C_HID_CORE
 	help
 	  Say Y here if you use a keyboard, a touchpad, a touchscreen, or any
 	  other HID based devices which is connected to your computer via I2C.
@@ -19,8 +23,8 @@ config I2C_HID_ACPI
 
 config I2C_HID_OF
 	tristate "HID over I2C transport layer Open Firmware driver"
-	default n
-	depends on I2C && INPUT && OF
+	depends on OF
+	select I2C_HID_CORE
 	help
 	  Say Y here if you use a keyboard, a touchpad, a touchscreen, or any
 	  other HID based devices which is connected to your computer via I2C.
@@ -34,8 +38,8 @@ config I2C_HID_OF
 
 config I2C_HID_OF_ELAN
 	tristate "Driver for Elan hid-i2c based devices on OF systems"
-	default n
-	depends on I2C && INPUT && OF
+	depends on OF
+	select I2C_HID_CORE
 	help
 	  Say Y here if you want support for Elan i2c devices that use
 	  the i2c-hid protocol on Open Firmware (Device Tree)-based
@@ -49,8 +53,8 @@ config I2C_HID_OF_ELAN
 
 config I2C_HID_OF_GOODIX
 	tristate "Driver for Goodix hid-i2c based devices on OF systems"
-	default n
-	depends on I2C && INPUT && OF
+	depends on OF
+	select I2C_HID_CORE
 	help
 	  Say Y here if you want support for Goodix i2c devices that use
 	  the i2c-hid protocol on Open Firmware (Device Tree)-based
@@ -62,10 +66,7 @@ config I2C_HID_OF_GOODIX
 	  will be called i2c-hid-of-goodix.  It will also build/depend on
 	  the module i2c-hid.
 
-endmenu
-
 config I2C_HID_CORE
 	tristate
-	default y if I2C_HID_ACPI=y || I2C_HID_OF=y || I2C_HID_OF_GOODIX=y
-	default m if I2C_HID_ACPI=m || I2C_HID_OF=m || I2C_HID_OF_GOODIX=m
-	select HID
+endif
+

drivers/hid/intel-ish-hid/Kconfig

@@ -6,7 +6,7 @@ config INTEL_ISH_HID
 	tristate "Intel Integrated Sensor Hub"
 	default n
 	depends on X86
-	select HID
+	depends on HID
 	help
 	  The Integrated Sensor Hub (ISH) enables the ability to offload
 	  sensor polling and algorithm processing to a dedicated low power