From 5a3ff8473c9100adb06d60e52477668d1504e8cf Mon Sep 17 00:00:00 2001
From: "Cousson, Benoit" <b-cousson@ti.com>
Date: Tue, 28 Feb 2012 14:10:09 +0100
Subject: [PATCH 1/4] ARM: OMAP: irqs: Fix NR_IRQS value to handle PRCM
interrupts
The following commit: 2f31b51659c2d8315ea2888ba5b93076febe672b
Author: Tero Kristo <t-kristo@ti.com>
Date: Fri Dec 16 14:37:00 2011 -0700
ARM: OMAP4: PRM: use PRCM interrupt handler
introduced the PRCM interrupt handler and thus the need
for 64 more interrupts. Since SPARSE_IRQ is still not fully
functional on OMAP, the NR_IRQS needs to be updated to avoid
the failure that happen during irq_alloc_descs call inside
the PRCM driver:
[ 0.208221] PRCM: failed to allocate irq descs: -12
Later the mux framework is then unable to request an IRQ from
the PRCM interrupt handler.
[ 1.802795] mux: Failed to setup hwmod io irq -22
Fix that by adding 64 more interrupts for OMAP2PLUS config.
Signed-off-by: Benoit Cousson <b-cousson@ti.com>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/plat-omap/include/plat/irqs.h | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h
index 2efd6454bce0d..37bbbbb981b22 100644
--- a/arch/arm/plat-omap/include/plat/irqs.h
+++ b/arch/arm/plat-omap/include/plat/irqs.h
@@ -428,8 +428,16 @@
#define OMAP_GPMC_NR_IRQS 8
#define OMAP_GPMC_IRQ_END (OMAP_GPMC_IRQ_BASE + OMAP_GPMC_NR_IRQS)
+/* PRCM IRQ handler */
+#ifdef CONFIG_ARCH_OMAP2PLUS
+#define OMAP_PRCM_IRQ_BASE (OMAP_GPMC_IRQ_END)
+#define OMAP_PRCM_NR_IRQS 64
+#define OMAP_PRCM_IRQ_END (OMAP_PRCM_IRQ_BASE + OMAP_PRCM_NR_IRQS)
+#else
+#define OMAP_PRCM_IRQ_END OMAP_GPMC_IRQ_END
+#endif
-#define NR_IRQS OMAP_GPMC_IRQ_END
+#define NR_IRQS OMAP_PRCM_IRQ_END
#define OMAP_IRQ_BIT(irq) (1 << ((irq) % 32))
From d867093d412c32e246570e6d07bd987b067d688d Mon Sep 17 00:00:00 2001
From: Rajendra Nayak <rnayak@ti.com>
Date: Tue, 28 Feb 2012 15:02:34 +0530
Subject: [PATCH 2/4] ARM: OMAP2+: Remove apply_uV constraints for fixed
regulator
VUSB is a fixed regulator, so get rid of the apply_uV constraint
for it, which fixes the following error seen at boot on omap4
SDP and PANDA boards.
machine_constraints_voltage: VUSB: failed to apply 3300000uV constraint
twl_reg twl_reg.46: can't register VUSB, -22
twl_reg: probe of twl_reg.46 failed with error -22
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap2/twl-common.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
index 10b20c652e5dc..4b57757bf9d12 100644
--- a/arch/arm/mach-omap2/twl-common.c
+++ b/arch/arm/mach-omap2/twl-common.c
@@ -270,7 +270,6 @@ static struct regulator_init_data omap4_vusb_idata = {
.constraints = {
.min_uV = 3300000,
.max_uV = 3300000,
- .apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
From c2d1355476b555b54c26d20962211fcf06b8c55f Mon Sep 17 00:00:00 2001
From: Vaibhav Hiremath <hvaibhav@ti.com>
Date: Mon, 23 Jan 2012 13:26:47 +0530
Subject: [PATCH 3/4] ARM: OMAP: id: Add missing break statement in
omap3xxx_check_revision
Add missing break statement in the function omap3xxx_check_revision.
The commit id 4390f5b2cb1f56 [ARM: OMAP: TI814X: Add cpu type macros
and detection support], removed the 'break' statement from the function
omap3xxx_check_revision(), resulting into wrong omap/cpu_revision
initialization for AM335x devices.
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
[tony@atomide.com: refreshed to apply after changes to cpu_rev]
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap2/id.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 6c5826605eaec..719ee423abe22 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -343,6 +343,7 @@ static void __init omap3_check_revision(const char **cpu_rev)
case 0xb944:
omap_revision = AM335X_REV_ES1_0;
*cpu_rev = "1.0";
+ break;
case 0xb8f2:
switch (rev) {
case 0:
From cc4ad9072cce2bf0eeae1fb197e42612fbac1f15 Mon Sep 17 00:00:00 2001
From: R Sricharan <r.sricharan@ti.com>
Date: Fri, 2 Mar 2012 16:31:18 +0530
Subject: [PATCH 4/4] ARM: OMAP2+: Fix module build errors with
CONFIG_OMAP4_ERRATA_I688
While building modules with randconfig the below errors are observed.
ERROR: "omap_bus_sync" [drivers/watchdog/sp805_wdt.ko] undefined!
ERROR: "omap_bus_sync" [drivers/watchdog/dw_wdt.ko] undefined!
ERROR: "omap_bus_sync" [drivers/virtio/virtio_ring.ko] undefined!
ERROR: "omap_bus_sync" [drivers/video/sm501fb.ko] undefined!
ERROR: "omap_bus_sync" [drivers/usb/mon/usbmon.ko] undefined!
ERROR: "omap_bus_sync" [drivers/usb/host/sl811-hcd.ko] undefined!
ERROR: "omap_bus_sync" [drivers/usb/host/ohci-hcd.ko] undefined!
ERROR: "omap_bus_sync" [drivers/usb/host/isp1760.ko] undefined!
ERROR: "omap_bus_sync" [drivers/usb/host/isp1362-hcd.ko] undefined!
ERROR: "omap_bus_sync" [drivers/usb/host/isp116x-hcd.ko] undefined!
ERROR: "omap_bus_sync" [drivers/usb/core/usbcore.ko] undefined!
ERROR: "omap_bus_sync" [drivers/tty/serial/altera_uart.ko] undefined!
ERROR: "omap_bus_sync" [drivers/tty/serial/altera_jtaguart.ko] undefined!
ERROR: "omap_bus_sync" [drivers/tty/serial/8250/8250_dw.ko] undefined!
ERROR: "omap_bus_sync" [drivers/ssb/ssb.ko] undefined!
ERROR: "omap_bus_sync" [drivers/rtc/rtc-cmos.ko] undefined!
ERROR: "omap_bus_sync" [drivers/rtc/rtc-bq4802.ko] undefined!
ERROR: "omap_bus_sync" [drivers/mtd/nand/tmio_nand.ko] undefined!
ERROR: "omap_bus_sync" [drivers/mtd/nand/omap2.ko] undefined!
Signed-off-by: R Sricharan <r.sricharan@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap2/omap4-common.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
index ebc595091312f..70de277f5c152 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -31,6 +31,7 @@
#include "common.h"
#include "omap4-sar-layout.h"
+#include <linux/export.h>
#ifdef CONFIG_CACHE_L2X0
static void __iomem *l2cache_base;
@@ -55,6 +56,7 @@ void omap_bus_sync(void)
isb();
}
}
+EXPORT_SYMBOL(omap_bus_sync);
/* Steal one page physical memory for barrier implementation */
int __init omap_barrier_reserve_memblock(void)