xhci: Add reset on resume quirk for asrock p67 host

The asrock p67 xhci controller completely dies on resume, add a
quirk for this, to bring the host back online after a suspend.

This should be backported to stable kernels as old as 2.6.37.

Signed-off-by: Maarten Lankhorst <m.b.lankhorst@gmail.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: stable@kernel.org

drivers/usb/host/xhci-pci.c

@@ -29,6 +29,9 @@
 #define PCI_VENDOR_ID_FRESCO_LOGIC	0x1b73
 #define PCI_DEVICE_ID_FRESCO_LOGIC_PDK	0x1000
 
+#define PCI_VENDOR_ID_ETRON		0x1b6f
+#define PCI_DEVICE_ID_ASROCK_P67	0x7023
+
 static const char hcd_name[] = "xhci_hcd";
 
 /* called after powerup, by probe or system-pm "wakeup" */
@@ -134,6 +137,11 @@ static int xhci_pci_setup(struct usb_hcd *hcd)
 		xhci->quirks |= XHCI_EP_LIMIT_QUIRK;
 		xhci->limit_active_eps = 64;
 	}
+	if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
+			pdev->device == PCI_DEVICE_ID_ASROCK_P67) {
+		xhci->quirks |= XHCI_RESET_ON_RESUME;
+		xhci_dbg(xhci, "QUIRK: Resetting on resume\n");
+	}
 
 	/* Make sure the HC is halted. */
 	retval = xhci_halt(xhci);

drivers/usb/host/xhci.c

@@ -759,6 +759,8 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 		msleep(100);
 
 	spin_lock_irq(&xhci->lock);
+	if (xhci->quirks & XHCI_RESET_ON_RESUME)
+		hibernated = true;
 
 	if (!hibernated) {
 		/* step 1: restore register */

drivers/usb/host/xhci.h

@@ -1310,6 +1310,7 @@ struct xhci_hcd {
  */
 #define XHCI_EP_LIMIT_QUIRK	(1 << 5)
 #define XHCI_BROKEN_MSI		(1 << 6)
+#define XHCI_RESET_ON_RESUME	(1 << 7)
 	unsigned int		num_active_eps;
 	unsigned int		limit_active_eps;
 	/* There are two roothubs to keep track of bus suspend info for */