From 47284e3e0f3c427c93f8583549b6c938e8a18015 Mon Sep 17 00:00:00 2001
From: Marcus Weseloh <mweseloh42@gmail.com>
Date: Sun, 8 Nov 2015 12:03:23 +0100
Subject: [PATCH 1/3] spi: sun4i: allow transfers to set transmission speed
Allow transfers to set the transmission speed rather than using the
device max_speed_hz value. The SPI core makes sure that the speed_hz
value is always set on the transfer.
Signed-off-by: Marcus Weseloh <mweseloh42@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
drivers/spi/spi-sun4i.c | 8 ++++----
drivers/spi/spi-sun6i.c | 8 ++++----
2 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/spi/spi-sun4i.c b/drivers/spi/spi-sun4i.c
index fbb0a4d74e91c..f60a6d634d61a 100644
--- a/drivers/spi/spi-sun4i.c
+++ b/drivers/spi/spi-sun4i.c
@@ -229,8 +229,8 @@ static int sun4i_spi_transfer_one(struct spi_master *master,
/* Ensure that we have a parent clock fast enough */
mclk_rate = clk_get_rate(sspi->mclk);
- if (mclk_rate < (2 * spi->max_speed_hz)) {
- clk_set_rate(sspi->mclk, 2 * spi->max_speed_hz);
+ if (mclk_rate < (2 * tfr->speed_hz)) {
+ clk_set_rate(sspi->mclk, 2 * tfr->speed_hz);
mclk_rate = clk_get_rate(sspi->mclk);
}
@@ -248,14 +248,14 @@ static int sun4i_spi_transfer_one(struct spi_master *master,
* First try CDR2, and if we can't reach the expected
* frequency, fall back to CDR1.
*/
- div = mclk_rate / (2 * spi->max_speed_hz);
+ div = mclk_rate / (2 * tfr->speed_hz);
if (div <= (SUN4I_CLK_CTL_CDR2_MASK + 1)) {
if (div > 0)
div--;
reg = SUN4I_CLK_CTL_CDR2(div) | SUN4I_CLK_CTL_DRS;
} else {
- div = ilog2(mclk_rate) - ilog2(spi->max_speed_hz);
+ div = ilog2(mclk_rate) - ilog2(tfr->speed_hz);
reg = SUN4I_CLK_CTL_CDR1(div);
}
diff --git a/drivers/spi/spi-sun6i.c b/drivers/spi/spi-sun6i.c
index ac48f59705a87..42e2c4bd690a2 100644
--- a/drivers/spi/spi-sun6i.c
+++ b/drivers/spi/spi-sun6i.c
@@ -217,8 +217,8 @@ static int sun6i_spi_transfer_one(struct spi_master *master,
/* Ensure that we have a parent clock fast enough */
mclk_rate = clk_get_rate(sspi->mclk);
- if (mclk_rate < (2 * spi->max_speed_hz)) {
- clk_set_rate(sspi->mclk, 2 * spi->max_speed_hz);
+ if (mclk_rate < (2 * tfr->speed_hz)) {
+ clk_set_rate(sspi->mclk, 2 * tfr->speed_hz);
mclk_rate = clk_get_rate(sspi->mclk);
}
@@ -236,14 +236,14 @@ static int sun6i_spi_transfer_one(struct spi_master *master,
* First try CDR2, and if we can't reach the expected
* frequency, fall back to CDR1.
*/
- div = mclk_rate / (2 * spi->max_speed_hz);
+ div = mclk_rate / (2 * tfr->speed_hz);
if (div <= (SUN6I_CLK_CTL_CDR2_MASK + 1)) {
if (div > 0)
div--;
reg = SUN6I_CLK_CTL_CDR2(div) | SUN6I_CLK_CTL_DRS;
} else {
- div = ilog2(mclk_rate) - ilog2(spi->max_speed_hz);
+ div = ilog2(mclk_rate) - ilog2(tfr->speed_hz);
reg = SUN6I_CLK_CTL_CDR1(div);
}
From f05ca854b3df79bf6596de5102eb99ca10d6089f Mon Sep 17 00:00:00 2001
From: Paul Burton <paul.burton@imgtec.com>
Date: Mon, 30 Nov 2015 16:21:42 +0000
Subject: [PATCH 2/3] spi: topcliff-pch: allow build for MIPS platforms
Allow the topcliff-pch driver to be built for MIPS platforms, in
preparation for use on the MIPS Boston board.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
drivers/spi/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 8b9c2a38d1ccd..7c78d52591af6 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -585,7 +585,7 @@ config SPI_TEGRA20_SLINK
config SPI_TOPCLIFF_PCH
tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) SPI"
- depends on PCI && (X86_32 || COMPILE_TEST)
+ depends on PCI && (X86_32 || MIPS || COMPILE_TEST)
help
SPI driver for the Topcliff PCH (Platform Controller Hub) SPI bus
used in some x86 embedded processors.
From 9d0c1c3332b49570454bb11e55d3c6c7993163da Mon Sep 17 00:00:00 2001
From: Geliang Tang <geliangtang@163.com>
Date: Fri, 1 Jan 2016 20:29:00 +0800
Subject: [PATCH 3/3] spi: zynq: use to_platform_device()
Use to_platform_device() instead of open-coding it.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Reviewed-by: Moritz Fischer <moritz.fischer@ettus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
drivers/spi/spi-zynqmp-gqspi.c | 8 ++------
1 file changed, 2 insertions(+), 6 deletions(-)
diff --git a/drivers/spi/spi-zynqmp-gqspi.c b/drivers/spi/spi-zynqmp-gqspi.c
index f23f36ebaf3dc..aab9b492c627a 100644
--- a/drivers/spi/spi-zynqmp-gqspi.c
+++ b/drivers/spi/spi-zynqmp-gqspi.c
@@ -917,9 +917,7 @@ static int zynqmp_qspi_start_transfer(struct spi_master *master,
*/
static int __maybe_unused zynqmp_qspi_suspend(struct device *dev)
{
- struct platform_device *pdev = container_of(dev,
- struct platform_device,
- dev);
+ struct platform_device *pdev = to_platform_device(dev);
struct spi_master *master = platform_get_drvdata(pdev);
spi_master_suspend(master);
@@ -940,9 +938,7 @@ static int __maybe_unused zynqmp_qspi_suspend(struct device *dev)
*/
static int __maybe_unused zynqmp_qspi_resume(struct device *dev)
{
- struct platform_device *pdev = container_of(dev,
- struct platform_device,
- dev);
+ struct platform_device *pdev = to_platform_device(dev);
struct spi_master *master = platform_get_drvdata(pdev);
struct zynqmp_qspi *xqspi = spi_master_get_devdata(master);
int ret = 0;