From 6da262378c99b17b1a1ac2e42aa65acc1bd471c7 Mon Sep 17 00:00:00 2001 From: Sasha Neftin Date: Tue, 20 Oct 2020 16:34:00 +0300 Subject: [PATCH 1/6] igc: reinit_locked() should be called with rtnl_lock This commit applies to the igc_reset_task the same changes that were applied to the igb driver in commit 024a8168b749 ("igb: reinit_locked() should be called with rtnl_lock") and fix possible race in reset subtask. Fixes: 0507ef8a0372 ("igc: Add transmit and receive fastpath and interrupt handlers") Suggested-by: Jakub Kicinski Signed-off-by: Sasha Neftin Tested-by: Dvora Fuxbrumer Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/igc/igc_main.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/net/ethernet/intel/igc/igc_main.c b/drivers/net/ethernet/intel/igc/igc_main.c index 7ac9597ddb845..4d989ebc97134 100644 --- a/drivers/net/ethernet/intel/igc/igc_main.c +++ b/drivers/net/ethernet/intel/igc/igc_main.c @@ -3831,10 +3831,19 @@ static void igc_reset_task(struct work_struct *work) adapter = container_of(work, struct igc_adapter, reset_task); + rtnl_lock(); + /* If we're already down or resetting, just bail */ + if (test_bit(__IGC_DOWN, &adapter->state) || + test_bit(__IGC_RESETTING, &adapter->state)) { + rtnl_unlock(); + return; + } + igc_rings_dump(adapter); igc_regs_dump(adapter); netdev_err(adapter->netdev, "Reset adapter\n"); igc_reinit_locked(adapter); + rtnl_unlock(); } /** From 8876529465c368beafd51a70f79d7a738f2aadf4 Mon Sep 17 00:00:00 2001 From: Muhammad Husaini Zulkifli Date: Sat, 20 Feb 2021 00:36:47 +0800 Subject: [PATCH 2/6] igc: Fix Pause Frame Advertising Fix Pause Frame Advertising when getting the advertisement via ethtool. Remove setting the "advertising" bit in link_ksettings during default case when Tx and Rx are in off state with Auto Negotiate off. Below is the original output of advertisement link during Tx and Rx off: Advertised pause frame use: Symmetric Receive-only Expected output: Advertised pause frame use: No Fixes: 8c5ad0dae93c ("igc: Add ethtool support") Signed-off-by: Muhammad Husaini Zulkifli Reviewed-by: Malli C Acked-by: Sasha Neftin Tested-by: Dvora Fuxbrumer Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/igc/igc_ethtool.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/net/ethernet/intel/igc/igc_ethtool.c b/drivers/net/ethernet/intel/igc/igc_ethtool.c index 824a6c454bca3..67a4aed45fc2a 100644 --- a/drivers/net/ethernet/intel/igc/igc_ethtool.c +++ b/drivers/net/ethernet/intel/igc/igc_ethtool.c @@ -1725,9 +1725,7 @@ static int igc_ethtool_get_link_ksettings(struct net_device *netdev, Asym_Pause); break; default: - ethtool_link_ksettings_add_link_mode(cmd, advertising, Pause); - ethtool_link_ksettings_add_link_mode(cmd, advertising, - Asym_Pause); + break; } status = pm_runtime_suspended(&adapter->pdev->dev) ? From 9a4a1cdc5ab52118c1f2b216f4240830b6528d32 Mon Sep 17 00:00:00 2001 From: Muhammad Husaini Zulkifli Date: Sat, 20 Feb 2021 00:36:48 +0800 Subject: [PATCH 3/6] igc: Fix Supported Pause Frame Link Setting The Supported Pause Frame always display "No" even though the Advertised pause frame showing the correct setting based on the pause parameters via ethtool. Set bit in link_ksettings to "Supported" for Pause Frame. Before output: Supported pause frame use: No Expected output: Supported pause frame use: Symmetric Fixes: 8c5ad0dae93c ("igc: Add ethtool support") Signed-off-by: Muhammad Husaini Zulkifli Reviewed-by: Malli C Tested-by: Dvora Fuxbrumer Acked-by: Sasha Neftin Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/igc/igc_ethtool.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/ethernet/intel/igc/igc_ethtool.c b/drivers/net/ethernet/intel/igc/igc_ethtool.c index 67a4aed45fc2a..8722294ab90ce 100644 --- a/drivers/net/ethernet/intel/igc/igc_ethtool.c +++ b/drivers/net/ethernet/intel/igc/igc_ethtool.c @@ -1711,6 +1711,9 @@ static int igc_ethtool_get_link_ksettings(struct net_device *netdev, Autoneg); } + /* Set pause flow control settings */ + ethtool_link_ksettings_add_link_mode(cmd, supported, Pause); + switch (hw->fc.requested_mode) { case igc_fc_full: ethtool_link_ksettings_add_link_mode(cmd, advertising, Pause); From fc9e5020971d57d7d0b3fef9e2ab2108fcb5588b Mon Sep 17 00:00:00 2001 From: Andre Guedes Date: Tue, 9 Mar 2021 22:42:56 -0800 Subject: [PATCH 4/6] igc: Fix igc_ptp_rx_pktstamp() The comment describing the timestamps layout in the packet buffer is wrong and the code is actually retrieving the timestamp in Timer 1 reference instead of Timer 0. This hasn't been a big issue so far because hardware is configured to report both timestamps using Timer 0 (see IGC_SRRCTL register configuration in igc_ptp_enable_rx_timestamp() helper). This patch fixes the comment and the code so we retrieve the timestamp in Timer 0 reference as expected. This patch also takes the opportunity to get rid of the hw.mac.type check since it is not required. Fixes: 81b055205e8ba ("igc: Add support for RX timestamping") Signed-off-by: Andre Guedes Signed-off-by: Vedang Patel Signed-off-by: Jithu Joseph Reviewed-by: Maciej Fijalkowski Tested-by: Dvora Fuxbrumer Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/igc/igc.h | 2 +- drivers/net/ethernet/intel/igc/igc_ptp.c | 72 +++++++++++++----------- 2 files changed, 41 insertions(+), 33 deletions(-) diff --git a/drivers/net/ethernet/intel/igc/igc.h b/drivers/net/ethernet/intel/igc/igc.h index 5d2809dfd06a4..1b08a7dc7bc4a 100644 --- a/drivers/net/ethernet/intel/igc/igc.h +++ b/drivers/net/ethernet/intel/igc/igc.h @@ -547,7 +547,7 @@ void igc_ptp_init(struct igc_adapter *adapter); void igc_ptp_reset(struct igc_adapter *adapter); void igc_ptp_suspend(struct igc_adapter *adapter); void igc_ptp_stop(struct igc_adapter *adapter); -void igc_ptp_rx_pktstamp(struct igc_q_vector *q_vector, void *va, +void igc_ptp_rx_pktstamp(struct igc_q_vector *q_vector, __le32 *va, struct sk_buff *skb); int igc_ptp_set_ts_config(struct net_device *netdev, struct ifreq *ifr); int igc_ptp_get_ts_config(struct net_device *netdev, struct ifreq *ifr); diff --git a/drivers/net/ethernet/intel/igc/igc_ptp.c b/drivers/net/ethernet/intel/igc/igc_ptp.c index ac0b9c85da7ca..545f4d0e67cf4 100644 --- a/drivers/net/ethernet/intel/igc/igc_ptp.c +++ b/drivers/net/ethernet/intel/igc/igc_ptp.c @@ -152,46 +152,54 @@ static void igc_ptp_systim_to_hwtstamp(struct igc_adapter *adapter, } /** - * igc_ptp_rx_pktstamp - retrieve Rx per packet timestamp + * igc_ptp_rx_pktstamp - Retrieve timestamp from Rx packet buffer * @q_vector: Pointer to interrupt specific structure * @va: Pointer to address containing Rx buffer * @skb: Buffer containing timestamp and packet * - * This function is meant to retrieve the first timestamp from the - * first buffer of an incoming frame. The value is stored in little - * endian format starting on byte 0. There's a second timestamp - * starting on byte 8. - **/ -void igc_ptp_rx_pktstamp(struct igc_q_vector *q_vector, void *va, + * This function retrieves the timestamp saved in the beginning of packet + * buffer. While two timestamps are available, one in timer0 reference and the + * other in timer1 reference, this function considers only the timestamp in + * timer0 reference. + */ +void igc_ptp_rx_pktstamp(struct igc_q_vector *q_vector, __le32 *va, struct sk_buff *skb) { struct igc_adapter *adapter = q_vector->adapter; - __le64 *regval = (__le64 *)va; - int adjust = 0; - - /* The timestamp is recorded in little endian format. - * DWORD: | 0 | 1 | 2 | 3 - * Field: | Timer0 Low | Timer0 High | Timer1 Low | Timer1 High + u64 regval; + int adjust; + + /* Timestamps are saved in little endian at the beginning of the packet + * buffer following the layout: + * + * DWORD: | 0 | 1 | 2 | 3 | + * Field: | Timer1 SYSTIML | Timer1 SYSTIMH | Timer0 SYSTIML | Timer0 SYSTIMH | + * + * SYSTIML holds the nanoseconds part while SYSTIMH holds the seconds + * part of the timestamp. */ - igc_ptp_systim_to_hwtstamp(adapter, skb_hwtstamps(skb), - le64_to_cpu(regval[0])); - - /* adjust timestamp for the RX latency based on link speed */ - if (adapter->hw.mac.type == igc_i225) { - switch (adapter->link_speed) { - case SPEED_10: - adjust = IGC_I225_RX_LATENCY_10; - break; - case SPEED_100: - adjust = IGC_I225_RX_LATENCY_100; - break; - case SPEED_1000: - adjust = IGC_I225_RX_LATENCY_1000; - break; - case SPEED_2500: - adjust = IGC_I225_RX_LATENCY_2500; - break; - } + regval = le32_to_cpu(va[2]); + regval |= (u64)le32_to_cpu(va[3]) << 32; + igc_ptp_systim_to_hwtstamp(adapter, skb_hwtstamps(skb), regval); + + /* Adjust timestamp for the RX latency based on link speed */ + switch (adapter->link_speed) { + case SPEED_10: + adjust = IGC_I225_RX_LATENCY_10; + break; + case SPEED_100: + adjust = IGC_I225_RX_LATENCY_100; + break; + case SPEED_1000: + adjust = IGC_I225_RX_LATENCY_1000; + break; + case SPEED_2500: + adjust = IGC_I225_RX_LATENCY_2500; + break; + default: + adjust = 0; + netdev_warn_once(adapter->netdev, "Imprecise timestamp\n"); + break; } skb_hwtstamps(skb)->hwtstamp = ktime_sub_ns(skb_hwtstamps(skb)->hwtstamp, adjust); From 21f857f0321d0d0ea9b1a758bd55dc63d1cb2437 Mon Sep 17 00:00:00 2001 From: Vitaly Lifshits Date: Wed, 21 Oct 2020 14:59:37 +0300 Subject: [PATCH 5/6] e1000e: add rtnl_lock() to e1000_reset_task A possible race condition was found in e1000_reset_task, after discovering a similar issue in igb driver via commit 024a8168b749 ("igb: reinit_locked() should be called with rtnl_lock"). Added rtnl_lock() and rtnl_unlock() to avoid this. Fixes: bc7f75fa9788 ("[E1000E]: New pci-express e1000 driver (currently for ICH9 devices only)") Suggested-by: Jakub Kicinski Signed-off-by: Vitaly Lifshits Tested-by: Dvora Fuxbrumer Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/e1000e/netdev.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index e9b82c209c2df..a0948002ddf85 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -5974,15 +5974,19 @@ static void e1000_reset_task(struct work_struct *work) struct e1000_adapter *adapter; adapter = container_of(work, struct e1000_adapter, reset_task); + rtnl_lock(); /* don't run the task if already down */ - if (test_bit(__E1000_DOWN, &adapter->state)) + if (test_bit(__E1000_DOWN, &adapter->state)) { + rtnl_unlock(); return; + } if (!(adapter->flags & FLAG_RESTART_NOW)) { e1000e_dump(adapter); e_err("Reset adapter unexpectedly\n"); } e1000e_reinit_locked(adapter); + rtnl_unlock(); } /** From b52912b8293f2c496f42583e65599aee606a0c18 Mon Sep 17 00:00:00 2001 From: Dinghao Liu Date: Sun, 28 Feb 2021 17:44:23 +0800 Subject: [PATCH 6/6] e1000e: Fix error handling in e1000_set_d0_lplu_state_82571 There is one e1e_wphy() call in e1000_set_d0_lplu_state_82571 that we have caught its return value but lack further handling. Check and terminate the execution flow just like other e1e_wphy() in this function. Fixes: bc7f75fa9788 ("[E1000E]: New pci-express e1000 driver (currently for ICH9 devices only)") Signed-off-by: Dinghao Liu Acked-by: Sasha Neftin Tested-by: Dvora Fuxbrumer Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/e1000e/82571.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/ethernet/intel/e1000e/82571.c b/drivers/net/ethernet/intel/e1000e/82571.c index 88faf05e23baf..0b1e890dd583b 100644 --- a/drivers/net/ethernet/intel/e1000e/82571.c +++ b/drivers/net/ethernet/intel/e1000e/82571.c @@ -899,6 +899,8 @@ static s32 e1000_set_d0_lplu_state_82571(struct e1000_hw *hw, bool active) } else { data &= ~IGP02E1000_PM_D0_LPLU; ret_val = e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, data); + if (ret_val) + return ret_val; /* LPLU and SmartSpeed are mutually exclusive. LPLU is used * during Dx states where the power conservation is most * important. During driver activity we should enable