From d154b0ff8995ceac3d8a2bc1c840d2f09a656c80 Mon Sep 17 00:00:00 2001 From: Loic Poulain Date: Wed, 19 Feb 2025 10:15:12 +0100 Subject: [PATCH] dt-bindings: net: bluetooth: nxp: Add wakeup pin properties NXP bluetooth controller may have GPIO pins used and routed for `WAKE_IN` and `WAKE_OUT`, such pin info must be known so that the driver is can configure the controller's firmware accordingly. Signed-off-by: Loic Poulain Reviewed-by: Rob Herring (Arm) Signed-off-by: Luiz Augusto von Dentz --- .../bindings/net/bluetooth/nxp,88w8987-bt.yaml | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml b/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml index 0a2d7baf5db32..04f55fac42ce8 100644 --- a/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml +++ b/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml @@ -40,6 +40,16 @@ properties: Host-To-Chip power save mechanism is driven by this GPIO connected to BT_WAKE_IN pin of the NXP chipset. + nxp,wakein-pin: + $ref: /schemas/types.yaml#/definitions/uint8 + description: + The GPIO number of the NXP chipset used for BT_WAKE_IN. + + nxp,wakeout-pin: + $ref: /schemas/types.yaml#/definitions/uint8 + description: + The GPIO number of the NXP chipset used for BT_WAKE_OUT. + required: - compatible @@ -54,5 +64,7 @@ examples: fw-init-baudrate = <3000000>; firmware-name = "uartuart8987_bt_v0.bin"; device-wakeup-gpios = <&gpio 11 GPIO_ACTIVE_HIGH>; + nxp,wakein-pin = /bits/ 8 <18>; + nxp,wakeout-pin = /bits/ 8 <19>; }; };