From c987ac6f1f088663b6dad39281071aeb31d450a8 Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Wed, 13 Jun 2018 14:20:21 +0200 Subject: [PATCH 01/27] clk: meson-gxbb: set fclk_div2 as CLK_IS_CRITICAL On Amlogic Meson GXBB & GXL platforms, the SCPI Cortex-M4 Co-Processor seems to be dependent on the FCLK_DIV2 to be operationnal. The issue occurred since v4.17-rc1 by freezing the kernel boot when the 'schedutil' cpufreq governor was selected as default : [ 12.071837] scpi_protocol scpi: SCP Protocol 0.0 Firmware 0.0.0 version domain-0 init dvfs: 4 [ 12.087757] hctosys: unable to open rtc device (rtc0) [ 12.087907] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 12.102241] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' But when disabling the MMC driver, the boot finished but cpufreq failed to change the CPU frequency : [ 12.153045] cpufreq: __target_index: Failed to change cpu frequency: -5 A bisect between v4.16 and v4.16-rc1 gave 05f814402d61 ("clk: meson: add fdiv clock gates") to be the first bad commit. This commit added support for the missing clock gates before the fixed PLL fixed dividers (FCLK_DIVx) and the clock framework basically disabled all the unused fixed dividers, thus disabled a critical clock path for the SCPI Co-Processor. This patch simply sets the FCLK_DIV2 gate as critical to ensure nobody can disable it. Fixes: 05f814402d61 ("clk: meson: add fdiv clock gates") Signed-off-by: Neil Armstrong Tested-by: Kevin Hilman [few corrections in the commit description] Signed-off-by: Jerome Brunet --- drivers/clk/meson/gxbb.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/clk/meson/gxbb.c b/drivers/clk/meson/gxbb.c index 240658404367f..177fffb9ebefe 100644 --- a/drivers/clk/meson/gxbb.c +++ b/drivers/clk/meson/gxbb.c @@ -498,6 +498,7 @@ static struct clk_regmap gxbb_fclk_div2 = { .ops = &clk_regmap_gate_ops, .parent_names = (const char *[]){ "fclk_div2_div" }, .num_parents = 1, + .flags = CLK_IS_CRITICAL, }, }; From 7813c14c9475dbebcd7f41bd498426d01255acf9 Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Tue, 19 Jun 2018 17:47:53 +0200 Subject: [PATCH 02/27] clk: meson: audio-divider is one based The audio divider is one based. This offset was mistakenly dropped from recalc_rate() when migrating to clk_regmap. Fixes: 88a4e1283681 ("clk: meson: migrate the audio divider clock to clk_regmap") Acked-by: Neil Armstrong Signed-off-by: Jerome Brunet --- drivers/clk/meson/clk-audio-divider.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/meson/clk-audio-divider.c b/drivers/clk/meson/clk-audio-divider.c index 58f546e048073..e4cf96ba704ed 100644 --- a/drivers/clk/meson/clk-audio-divider.c +++ b/drivers/clk/meson/clk-audio-divider.c @@ -51,7 +51,7 @@ static unsigned long audio_divider_recalc_rate(struct clk_hw *hw, struct meson_clk_audio_div_data *adiv = meson_clk_audio_div_data(clk); unsigned long divider; - divider = meson_parm_read(clk->map, &adiv->div); + divider = meson_parm_read(clk->map, &adiv->div) + 1; return DIV_ROUND_UP_ULL((u64)parent_rate, divider); } From 372401efd9eeee24701848874ecb9845524013ee Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Tue, 22 May 2018 18:34:56 +0200 Subject: [PATCH 03/27] dt-bindings: clock: add meson axg audio clock controller bindings Export the clock ids dt-bindings usable by the consumers of the clock controller and add the documentation for the device tree bindings of the audio clock controller of the A113 based SoCs. Acked-by: Neil Armstrong Reviewed-by: Rob Herring Signed-off-by: Jerome Brunet --- .../bindings/clock/amlogic,axg-audio-clkc.txt | 56 +++++++++++ include/dt-bindings/clock/axg-audio-clkc.h | 94 +++++++++++++++++++ 2 files changed, 150 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/amlogic,axg-audio-clkc.txt create mode 100644 include/dt-bindings/clock/axg-audio-clkc.h diff --git a/Documentation/devicetree/bindings/clock/amlogic,axg-audio-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,axg-audio-clkc.txt new file mode 100644 index 0000000000000..61777ad24f61c --- /dev/null +++ b/Documentation/devicetree/bindings/clock/amlogic,axg-audio-clkc.txt @@ -0,0 +1,56 @@ +* Amlogic AXG Audio Clock Controllers + +The Amlogic AXG audio clock controller generates and supplies clock to the +other elements of the audio subsystem, such as fifos, i2s, spdif and pdm +devices. + +Required Properties: + +- compatible : should be "amlogic,axg-audio-clkc" for the A113X and A113D +- reg : physical base address of the clock controller and length of + memory mapped region. +- clocks : a list of phandle + clock-specifier pairs for the clocks listed + in clock-names. +- clock-names : must contain the following: + * "pclk" - Main peripheral bus clock + may contain the following: + * "mst_in[0-7]" - 8 input plls to generate clock signals + * "slv_sclk[0-9]" - 10 slave bit clocks provided by external + components. + * "slv_lrclk[0-9]" - 10 slave sample clocks provided by external + components. +- resets : phandle of the internal reset line +- #clock-cells : should be 1. + +Each clock is assigned an identifier and client nodes can use this identifier +to specify the clock which they consume. All available clocks are defined as +preprocessor macros in the dt-bindings/clock/axg-audio-clkc.h header and can be +used in device tree sources. + +Example: + +clkc_audio: clock-controller@0 { + compatible = "amlogic,axg-audio-clkc"; + reg = <0x0 0x0 0x0 0xb4>; + #clock-cells = <1>; + + clocks = <&clkc CLKID_AUDIO>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL3>, + <&clkc CLKID_HIFI_PLL>, + <&clkc CLKID_FCLK_DIV3>, + <&clkc CLKID_FCLK_DIV4>, + <&clkc CLKID_GP0_PLL>; + clock-names = "pclk", + "mst_in0", + "mst_in1", + "mst_in2", + "mst_in3", + "mst_in4", + "mst_in5", + "mst_in6", + "mst_in7"; + resets = <&reset RESET_AUDIO>; +}; diff --git a/include/dt-bindings/clock/axg-audio-clkc.h b/include/dt-bindings/clock/axg-audio-clkc.h new file mode 100644 index 0000000000000..fd9c362099d9b --- /dev/null +++ b/include/dt-bindings/clock/axg-audio-clkc.h @@ -0,0 +1,94 @@ +/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */ +/* + * Copyright (c) 2018 Baylibre SAS. + * Author: Jerome Brunet + */ + +#ifndef __AXG_AUDIO_CLKC_BINDINGS_H +#define __AXG_AUDIO_CLKC_BINDINGS_H + +#define AUD_CLKID_SLV_SCLK0 9 +#define AUD_CLKID_SLV_SCLK1 10 +#define AUD_CLKID_SLV_SCLK2 11 +#define AUD_CLKID_SLV_SCLK3 12 +#define AUD_CLKID_SLV_SCLK4 13 +#define AUD_CLKID_SLV_SCLK5 14 +#define AUD_CLKID_SLV_SCLK6 15 +#define AUD_CLKID_SLV_SCLK7 16 +#define AUD_CLKID_SLV_SCLK8 17 +#define AUD_CLKID_SLV_SCLK9 18 +#define AUD_CLKID_SLV_LRCLK0 19 +#define AUD_CLKID_SLV_LRCLK1 20 +#define AUD_CLKID_SLV_LRCLK2 21 +#define AUD_CLKID_SLV_LRCLK3 22 +#define AUD_CLKID_SLV_LRCLK4 23 +#define AUD_CLKID_SLV_LRCLK5 24 +#define AUD_CLKID_SLV_LRCLK6 25 +#define AUD_CLKID_SLV_LRCLK7 26 +#define AUD_CLKID_SLV_LRCLK8 27 +#define AUD_CLKID_SLV_LRCLK9 28 +#define AUD_CLKID_DDR_ARB 29 +#define AUD_CLKID_PDM 30 +#define AUD_CLKID_TDMIN_A 31 +#define AUD_CLKID_TDMIN_B 32 +#define AUD_CLKID_TDMIN_C 33 +#define AUD_CLKID_TDMIN_LB 34 +#define AUD_CLKID_TDMOUT_A 35 +#define AUD_CLKID_TDMOUT_B 36 +#define AUD_CLKID_TDMOUT_C 37 +#define AUD_CLKID_FRDDR_A 38 +#define AUD_CLKID_FRDDR_B 39 +#define AUD_CLKID_FRDDR_C 40 +#define AUD_CLKID_TODDR_A 41 +#define AUD_CLKID_TODDR_B 42 +#define AUD_CLKID_TODDR_C 43 +#define AUD_CLKID_LOOPBACK 44 +#define AUD_CLKID_SPDIFIN 45 +#define AUD_CLKID_SPDIFOUT 46 +#define AUD_CLKID_RESAMPLE 47 +#define AUD_CLKID_POWER_DETECT 48 +#define AUD_CLKID_MST_A_MCLK 49 +#define AUD_CLKID_MST_B_MCLK 50 +#define AUD_CLKID_MST_C_MCLK 51 +#define AUD_CLKID_MST_D_MCLK 52 +#define AUD_CLKID_MST_E_MCLK 53 +#define AUD_CLKID_MST_F_MCLK 54 +#define AUD_CLKID_SPDIFOUT_CLK 55 +#define AUD_CLKID_SPDIFIN_CLK 56 +#define AUD_CLKID_PDM_DCLK 57 +#define AUD_CLKID_PDM_SYSCLK 58 +#define AUD_CLKID_MST_A_SCLK 79 +#define AUD_CLKID_MST_B_SCLK 80 +#define AUD_CLKID_MST_C_SCLK 81 +#define AUD_CLKID_MST_D_SCLK 82 +#define AUD_CLKID_MST_E_SCLK 83 +#define AUD_CLKID_MST_F_SCLK 84 +#define AUD_CLKID_MST_A_LRCLK 86 +#define AUD_CLKID_MST_B_LRCLK 87 +#define AUD_CLKID_MST_C_LRCLK 88 +#define AUD_CLKID_MST_D_LRCLK 89 +#define AUD_CLKID_MST_E_LRCLK 90 +#define AUD_CLKID_MST_F_LRCLK 91 +#define AUD_CLKID_TDMIN_A_SCLK_SEL 116 +#define AUD_CLKID_TDMIN_B_SCLK_SEL 117 +#define AUD_CLKID_TDMIN_C_SCLK_SEL 118 +#define AUD_CLKID_TDMIN_LB_SCLK_SEL 119 +#define AUD_CLKID_TDMOUT_A_SCLK_SEL 120 +#define AUD_CLKID_TDMOUT_B_SCLK_SEL 121 +#define AUD_CLKID_TDMOUT_C_SCLK_SEL 122 +#define AUD_CLKID_TDMIN_A_SCLK 123 +#define AUD_CLKID_TDMIN_B_SCLK 124 +#define AUD_CLKID_TDMIN_C_SCLK 125 +#define AUD_CLKID_TDMIN_LB_SCLK 126 +#define AUD_CLKID_TDMOUT_A_SCLK 127 +#define AUD_CLKID_TDMOUT_B_SCLK 128 +#define AUD_CLKID_TDMOUT_C_SCLK 129 +#define AUD_CLKID_TDMIN_A_LRCLK 130 +#define AUD_CLKID_TDMIN_B_LRCLK 131 +#define AUD_CLKID_TDMIN_C_LRCLK 132 +#define AUD_CLKID_TDMIN_LB_LRCLK 133 +#define AUD_CLKID_TDMOUT_A_LRCLK 134 +#define AUD_CLKID_TDMOUT_B_LRCLK 135 +#define AUD_CLKID_TDMOUT_C_LRCLK 136 + +#endif /* __AXG_AUDIO_CLKC_BINDINGS_H */ From 54614d1218fdf5ccf87ac1499514755fd9c4a179 Mon Sep 17 00:00:00 2001 From: Anson Huang Date: Mon, 4 Jun 2018 09:06:43 +0800 Subject: [PATCH 04/27] clk: imx6q: remove clks_init_on array Clock framework will enable those clocks registered with CLK_IS_CRITICAL flag, so no need to have clks_init_on array during clock initialization now. ARM clock is busy divider type which has the CLK_IS_CRITICAL flag set by default when registered. Signed-off-by: Anson Huang Reviewed-by: Fabio Estevam Signed-off-by: Stephen Boyd --- drivers/clk/imx/clk-imx6q.c | 14 ++------------ 1 file changed, 2 insertions(+), 12 deletions(-) diff --git a/drivers/clk/imx/clk-imx6q.c b/drivers/clk/imx/clk-imx6q.c index b9ea7037e1939..8754c6197ef60 100644 --- a/drivers/clk/imx/clk-imx6q.c +++ b/drivers/clk/imx/clk-imx6q.c @@ -96,12 +96,6 @@ static const char *pll7_bypass_sels[] = { "pll7", "pll7_bypass_src", }; static struct clk *clk[IMX6QDL_CLK_END]; static struct clk_onecell_data clk_data; -static unsigned int const clks_init_on[] __initconst = { - IMX6QDL_CLK_MMDC_CH0_AXI, - IMX6QDL_CLK_ROM, - IMX6QDL_CLK_ARM, -}; - static struct clk_div_table clk_enet_ref_table[] = { { .val = 0, .div = 20, }, { .val = 1, .div = 10, }, @@ -417,7 +411,6 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) { struct device_node *np; void __iomem *anatop_base, *base; - int i; int ret; clk[IMX6QDL_CLK_DUMMY] = imx_clk_fixed("dummy", 0); @@ -794,7 +787,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) clk[IMX6QDL_CLK_MLB] = imx_clk_gate2("mlb", "mlb_podf", base + 0x74, 18); else clk[IMX6QDL_CLK_MLB] = imx_clk_gate2("mlb", "axi", base + 0x74, 18); - clk[IMX6QDL_CLK_MMDC_CH0_AXI] = imx_clk_gate2("mmdc_ch0_axi", "mmdc_ch0_axi_podf", base + 0x74, 20); + clk[IMX6QDL_CLK_MMDC_CH0_AXI] = imx_clk_gate2_flags("mmdc_ch0_axi", "mmdc_ch0_axi_podf", base + 0x74, 20, CLK_IS_CRITICAL); clk[IMX6QDL_CLK_MMDC_CH1_AXI] = imx_clk_gate2("mmdc_ch1_axi", "mmdc_ch1_axi_podf", base + 0x74, 22); clk[IMX6QDL_CLK_OCRAM] = imx_clk_gate2("ocram", "ahb", base + 0x74, 28); clk[IMX6QDL_CLK_OPENVG_AXI] = imx_clk_gate2("openvg_axi", "axi", base + 0x74, 30); @@ -808,7 +801,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) clk[IMX6QDL_CLK_GPMI_BCH] = imx_clk_gate2("gpmi_bch", "usdhc4", base + 0x78, 26); clk[IMX6QDL_CLK_GPMI_IO] = imx_clk_gate2("gpmi_io", "enfc", base + 0x78, 28); clk[IMX6QDL_CLK_GPMI_APB] = imx_clk_gate2("gpmi_apb", "usdhc3", base + 0x78, 30); - clk[IMX6QDL_CLK_ROM] = imx_clk_gate2("rom", "ahb", base + 0x7c, 0); + clk[IMX6QDL_CLK_ROM] = imx_clk_gate2_flags("rom", "ahb", base + 0x7c, 0, CLK_IS_CRITICAL); clk[IMX6QDL_CLK_SATA] = imx_clk_gate2("sata", "ahb", base + 0x7c, 4); clk[IMX6QDL_CLK_SDMA] = imx_clk_gate2("sdma", "ahb", base + 0x7c, 6); clk[IMX6QDL_CLK_SPBA] = imx_clk_gate2("spba", "ipg", base + 0x7c, 12); @@ -878,9 +871,6 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) */ clk_set_parent(clk[IMX6QDL_CLK_ENFC_SEL], clk[IMX6QDL_CLK_PLL2_PFD2_396M]); - for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) - clk_prepare_enable(clk[clks_init_on[i]]); - if (IS_ENABLED(CONFIG_USB_MXS_PHY)) { clk_prepare_enable(clk[IMX6QDL_CLK_USBPHY1_GATE]); clk_prepare_enable(clk[IMX6QDL_CLK_USBPHY2_GATE]); From 8e12ce99541bdf5ec7cee08683bf455d8c882e49 Mon Sep 17 00:00:00 2001 From: Anson Huang Date: Mon, 4 Jun 2018 09:06:44 +0800 Subject: [PATCH 05/27] clk: imx6sl: remove clks_init_on array Clock framework will enable those clocks registered with CLK_IS_CRITICAL flag, so no need to have clks_init_on array during clock initialization now. ARM clock is busy divider type which has the CLK_IS_CRITICAL flag set by default when registered. IPG clock has no clock gate and its parent AHB clock is busy divider type, so no need to add CLK_IS_CRITICAL flag for IPG clock. Signed-off-by: Anson Huang Reviewed-by: Fabio Estevam Signed-off-by: Stephen Boyd --- drivers/clk/imx/clk-imx6sl.c | 12 ------------ 1 file changed, 12 deletions(-) diff --git a/drivers/clk/imx/clk-imx6sl.c b/drivers/clk/imx/clk-imx6sl.c index 66b1dd1cfad07..eb6bcbf345a3b 100644 --- a/drivers/clk/imx/clk-imx6sl.c +++ b/drivers/clk/imx/clk-imx6sl.c @@ -104,10 +104,6 @@ static struct clk_onecell_data clk_data; static void __iomem *ccm_base; static void __iomem *anatop_base; -static const u32 clks_init_on[] __initconst = { - IMX6SL_CLK_IPG, IMX6SL_CLK_ARM, IMX6SL_CLK_MMDC_ROOT, -}; - /* * ERR005311 CCM: After exit from WAIT mode, unwanted interrupt(s) taken * during WAIT mode entry process could cause cache memory @@ -195,7 +191,6 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node) { struct device_node *np; void __iomem *base; - int i; int ret; clks[IMX6SL_CLK_DUMMY] = imx_clk_fixed("dummy", 0); @@ -426,13 +421,6 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node) pr_warn("%s: failed to set AHB clock rate %d!\n", __func__, ret); - /* - * Make sure those always on clocks are enabled to maintain the correct - * usecount and enabling/disabling of parent PLLs. - */ - for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) - clk_prepare_enable(clks[clks_init_on[i]]); - if (IS_ENABLED(CONFIG_USB_MXS_PHY)) { clk_prepare_enable(clks[IMX6SL_CLK_USBPHY1_GATE]); clk_prepare_enable(clks[IMX6SL_CLK_USBPHY2_GATE]); From 566f5b67fc0c3bffec03a963334eb7c1df30204d Mon Sep 17 00:00:00 2001 From: Anson Huang Date: Mon, 4 Jun 2018 09:06:45 +0800 Subject: [PATCH 06/27] clk: imx6sx: remove clks_init_on array Clock framework will enable those clocks registered with CLK_IS_CRITICAL flag, so no need to have clks_init_on array during clock initialization now. ARM clock is busy divider type which has the CLK_IS_CRITICAL flag set by default when registered. IPG clock has no clock gate and its parent AHB clock is busy divider type, so no need to add CLK_IS_CRITICAL flag for IPG clock. Signed-off-by: Anson Huang Reviewed-by: Fabio Estevam Signed-off-by: Stephen Boyd --- drivers/clk/imx/clk-imx6sx.c | 40 +++++++++++++----------------------- 1 file changed, 14 insertions(+), 26 deletions(-) diff --git a/drivers/clk/imx/clk-imx6sx.c b/drivers/clk/imx/clk-imx6sx.c index 10c771b91ef6a..aed43910e26ed 100644 --- a/drivers/clk/imx/clk-imx6sx.c +++ b/drivers/clk/imx/clk-imx6sx.c @@ -92,14 +92,6 @@ static const char *pll7_bypass_sels[] = { "pll7", "pll7_bypass_src", }; static struct clk *clks[IMX6SX_CLK_CLK_END]; static struct clk_onecell_data clk_data; -static int const clks_init_on[] __initconst = { - IMX6SX_CLK_AIPS_TZ1, IMX6SX_CLK_AIPS_TZ2, IMX6SX_CLK_AIPS_TZ3, - IMX6SX_CLK_IPMUX1, IMX6SX_CLK_IPMUX2, IMX6SX_CLK_IPMUX3, - IMX6SX_CLK_WAKEUP, IMX6SX_CLK_MMDC_P0_FAST, IMX6SX_CLK_MMDC_P0_IPG, - IMX6SX_CLK_ROM, IMX6SX_CLK_ARM, IMX6SX_CLK_IPG, IMX6SX_CLK_OCRAM, - IMX6SX_CLK_PER2_MAIN, IMX6SX_CLK_PERCLK, IMX6SX_CLK_TZASC1, -}; - static const struct clk_div_table clk_enet_ref_table[] = { { .val = 0, .div = 20, }, { .val = 1, .div = 10, }, @@ -142,7 +134,6 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node) { struct device_node *np; void __iomem *base; - int i; clks[IMX6SX_CLK_DUMMY] = imx_clk_fixed("dummy", 0); @@ -332,7 +323,7 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node) clks[IMX6SX_CLK_QSPI1_PODF] = imx_clk_divider("qspi1_podf", "qspi1_sel", base + 0x1c, 26, 3); clks[IMX6SX_CLK_EIM_SLOW_PODF] = imx_clk_divider("eim_slow_podf", "eim_slow_sel", base + 0x1c, 23, 3); clks[IMX6SX_CLK_LCDIF2_PODF] = imx_clk_divider("lcdif2_podf", "lcdif2_pred", base + 0x1c, 20, 3); - clks[IMX6SX_CLK_PERCLK] = imx_clk_divider("perclk", "perclk_sel", base + 0x1c, 0, 6); + clks[IMX6SX_CLK_PERCLK] = imx_clk_divider_flags("perclk", "perclk_sel", base + 0x1c, 0, 6, CLK_IS_CRITICAL); clks[IMX6SX_CLK_VID_PODF] = imx_clk_divider("vid_podf", "vid_sel", base + 0x20, 24, 2); clks[IMX6SX_CLK_CAN_PODF] = imx_clk_divider("can_podf", "can_sel", base + 0x20, 2, 6); clks[IMX6SX_CLK_USDHC4_PODF] = imx_clk_divider("usdhc4_podf", "usdhc4_sel", base + 0x24, 22, 3); @@ -380,8 +371,8 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node) /* name parent_name reg shift */ /* CCGR0 */ - clks[IMX6SX_CLK_AIPS_TZ1] = imx_clk_gate2("aips_tz1", "ahb", base + 0x68, 0); - clks[IMX6SX_CLK_AIPS_TZ2] = imx_clk_gate2("aips_tz2", "ahb", base + 0x68, 2); + clks[IMX6SX_CLK_AIPS_TZ1] = imx_clk_gate2_flags("aips_tz1", "ahb", base + 0x68, 0, CLK_IS_CRITICAL); + clks[IMX6SX_CLK_AIPS_TZ2] = imx_clk_gate2_flags("aips_tz2", "ahb", base + 0x68, 2, CLK_IS_CRITICAL); clks[IMX6SX_CLK_APBH_DMA] = imx_clk_gate2("apbh_dma", "usdhc3", base + 0x68, 4); clks[IMX6SX_CLK_ASRC_MEM] = imx_clk_gate2_shared("asrc_mem", "ahb", base + 0x68, 6, &share_count_asrc); clks[IMX6SX_CLK_ASRC_IPG] = imx_clk_gate2_shared("asrc_ipg", "ahb", base + 0x68, 6, &share_count_asrc); @@ -394,7 +385,7 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node) clks[IMX6SX_CLK_CAN2_SERIAL] = imx_clk_gate2("can2_serial", "can_podf", base + 0x68, 20); clks[IMX6SX_CLK_DCIC1] = imx_clk_gate2("dcic1", "display_podf", base + 0x68, 24); clks[IMX6SX_CLK_DCIC2] = imx_clk_gate2("dcic2", "display_podf", base + 0x68, 26); - clks[IMX6SX_CLK_AIPS_TZ3] = imx_clk_gate2("aips_tz3", "ahb", base + 0x68, 30); + clks[IMX6SX_CLK_AIPS_TZ3] = imx_clk_gate2_flags("aips_tz3", "ahb", base + 0x68, 30, CLK_IS_CRITICAL); /* CCGR1 */ clks[IMX6SX_CLK_ECSPI1] = imx_clk_gate2("ecspi1", "ecspi_podf", base + 0x6c, 0); @@ -407,7 +398,7 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node) clks[IMX6SX_CLK_ESAI_EXTAL] = imx_clk_gate2_shared("esai_extal", "esai_podf", base + 0x6c, 16, &share_count_esai); clks[IMX6SX_CLK_ESAI_IPG] = imx_clk_gate2_shared("esai_ipg", "ahb", base + 0x6c, 16, &share_count_esai); clks[IMX6SX_CLK_ESAI_MEM] = imx_clk_gate2_shared("esai_mem", "ahb", base + 0x6c, 16, &share_count_esai); - clks[IMX6SX_CLK_WAKEUP] = imx_clk_gate2("wakeup", "ipg", base + 0x6c, 18); + clks[IMX6SX_CLK_WAKEUP] = imx_clk_gate2_flags("wakeup", "ipg", base + 0x6c, 18, CLK_IS_CRITICAL); clks[IMX6SX_CLK_GPT_BUS] = imx_clk_gate2("gpt_bus", "perclk", base + 0x6c, 20); clks[IMX6SX_CLK_GPT_SERIAL] = imx_clk_gate2("gpt_serial", "perclk", base + 0x6c, 22); clks[IMX6SX_CLK_GPU] = imx_clk_gate2("gpu", "gpu_core_podf", base + 0x6c, 26); @@ -420,10 +411,10 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node) clks[IMX6SX_CLK_I2C3] = imx_clk_gate2("i2c3", "perclk", base + 0x70, 10); clks[IMX6SX_CLK_OCOTP] = imx_clk_gate2("ocotp", "ipg", base + 0x70, 12); clks[IMX6SX_CLK_IOMUXC] = imx_clk_gate2("iomuxc", "lcdif1_podf", base + 0x70, 14); - clks[IMX6SX_CLK_IPMUX1] = imx_clk_gate2("ipmux1", "ahb", base + 0x70, 16); - clks[IMX6SX_CLK_IPMUX2] = imx_clk_gate2("ipmux2", "ahb", base + 0x70, 18); - clks[IMX6SX_CLK_IPMUX3] = imx_clk_gate2("ipmux3", "ahb", base + 0x70, 20); - clks[IMX6SX_CLK_TZASC1] = imx_clk_gate2("tzasc1", "mmdc_podf", base + 0x70, 22); + clks[IMX6SX_CLK_IPMUX1] = imx_clk_gate2_flags("ipmux1", "ahb", base + 0x70, 16, CLK_IS_CRITICAL); + clks[IMX6SX_CLK_IPMUX2] = imx_clk_gate2_flags("ipmux2", "ahb", base + 0x70, 18, CLK_IS_CRITICAL); + clks[IMX6SX_CLK_IPMUX3] = imx_clk_gate2_flags("ipmux3", "ahb", base + 0x70, 20, CLK_IS_CRITICAL); + clks[IMX6SX_CLK_TZASC1] = imx_clk_gate2_flags("tzasc1", "mmdc_podf", base + 0x70, 22, CLK_IS_CRITICAL); clks[IMX6SX_CLK_LCDIF_APB] = imx_clk_gate2("lcdif_apb", "display_podf", base + 0x70, 28); clks[IMX6SX_CLK_PXP_AXI] = imx_clk_gate2("pxp_axi", "display_podf", base + 0x70, 30); @@ -437,15 +428,15 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node) clks[IMX6SX_CLK_LDB_DI0] = imx_clk_gate2("ldb_di0", "ldb_di0_div_sel", base + 0x74, 12); clks[IMX6SX_CLK_QSPI1] = imx_clk_gate2("qspi1", "qspi1_podf", base + 0x74, 14); clks[IMX6SX_CLK_MLB] = imx_clk_gate2("mlb", "ahb", base + 0x74, 18); - clks[IMX6SX_CLK_MMDC_P0_FAST] = imx_clk_gate2("mmdc_p0_fast", "mmdc_podf", base + 0x74, 20); - clks[IMX6SX_CLK_MMDC_P0_IPG] = imx_clk_gate2("mmdc_p0_ipg", "ipg", base + 0x74, 24); - clks[IMX6SX_CLK_OCRAM] = imx_clk_gate2("ocram", "ocram_podf", base + 0x74, 28); + clks[IMX6SX_CLK_MMDC_P0_FAST] = imx_clk_gate2_flags("mmdc_p0_fast", "mmdc_podf", base + 0x74, 20, CLK_IS_CRITICAL); + clks[IMX6SX_CLK_MMDC_P0_IPG] = imx_clk_gate2_flags("mmdc_p0_ipg", "ipg", base + 0x74, 24, CLK_IS_CRITICAL); + clks[IMX6SX_CLK_OCRAM] = imx_clk_gate2_flags("ocram", "ocram_podf", base + 0x74, 28, CLK_IS_CRITICAL); /* CCGR4 */ clks[IMX6SX_CLK_PCIE_AXI] = imx_clk_gate2("pcie_axi", "display_podf", base + 0x78, 0); clks[IMX6SX_CLK_QSPI2] = imx_clk_gate2("qspi2", "qspi2_podf", base + 0x78, 10); clks[IMX6SX_CLK_PER1_BCH] = imx_clk_gate2("per1_bch", "usdhc3", base + 0x78, 12); - clks[IMX6SX_CLK_PER2_MAIN] = imx_clk_gate2("per2_main", "ahb", base + 0x78, 14); + clks[IMX6SX_CLK_PER2_MAIN] = imx_clk_gate2_flags("per2_main", "ahb", base + 0x78, 14, CLK_IS_CRITICAL); clks[IMX6SX_CLK_PWM1] = imx_clk_gate2("pwm1", "perclk", base + 0x78, 16); clks[IMX6SX_CLK_PWM2] = imx_clk_gate2("pwm2", "perclk", base + 0x78, 18); clks[IMX6SX_CLK_PWM3] = imx_clk_gate2("pwm3", "perclk", base + 0x78, 20); @@ -456,7 +447,7 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node) clks[IMX6SX_CLK_GPMI_APB] = imx_clk_gate2("gpmi_apb", "usdhc3", base + 0x78, 30); /* CCGR5 */ - clks[IMX6SX_CLK_ROM] = imx_clk_gate2("rom", "ahb", base + 0x7c, 0); + clks[IMX6SX_CLK_ROM] = imx_clk_gate2_flags("rom", "ahb", base + 0x7c, 0, CLK_IS_CRITICAL); clks[IMX6SX_CLK_SDMA] = imx_clk_gate2("sdma", "ahb", base + 0x7c, 6); clks[IMX6SX_CLK_SPBA] = imx_clk_gate2("spba", "ipg", base + 0x7c, 12); clks[IMX6SX_CLK_AUDIO] = imx_clk_gate2_shared("audio", "audio_podf", base + 0x7c, 14, &share_count_audio); @@ -502,9 +493,6 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node) clk_data.clk_num = ARRAY_SIZE(clks); of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); - for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) - clk_prepare_enable(clks[clks_init_on[i]]); - if (IS_ENABLED(CONFIG_USB_MXS_PHY)) { clk_prepare_enable(clks[IMX6SX_CLK_USBPHY1_GATE]); clk_prepare_enable(clks[IMX6SX_CLK_USBPHY2_GATE]); From 6c0ad1df179b8d26ecd5e9954c36146fa87c1b0c Mon Sep 17 00:00:00 2001 From: Yixun Lan Date: Mon, 2 Jul 2018 21:31:17 +0000 Subject: [PATCH 07/27] clk: meson-axg: add pcie and mipi clock bindings Add the pcie and mipi clock dt-bindings for the pcie driver. Since the mipi clock isalso used by the pcie driver, we add it together in this patch. Tested-by: Jianxin Qin Signed-off-by: Yixun Lan Signed-off-by: Jerome Brunet --- include/dt-bindings/clock/axg-clkc.h | 3 +++ 1 file changed, 3 insertions(+) diff --git a/include/dt-bindings/clock/axg-clkc.h b/include/dt-bindings/clock/axg-clkc.h index 555937a25504b..70371228b7e02 100644 --- a/include/dt-bindings/clock/axg-clkc.h +++ b/include/dt-bindings/clock/axg-clkc.h @@ -68,5 +68,8 @@ #define CLKID_SD_EMMC_B_CLK0 59 #define CLKID_SD_EMMC_C_CLK0 60 #define CLKID_HIFI_PLL 69 +#define CLKID_PCIE_CML_EN0 79 +#define CLKID_PCIE_CML_EN1 80 +#define CLKID_MIPI_ENABLE 81 #endif /* __AXG_CLKC_H */ From 63b8add24e1a99d7218c904f258623e7c07ce99e Mon Sep 17 00:00:00 2001 From: Elaine Zhang Date: Fri, 15 Jun 2018 10:16:49 +0800 Subject: [PATCH 08/27] clk: rockchip: add dt-binding header for px30 Add the dt-bindings header for the px30, that gets shared between the clock controller and the clock references in the dts. Add softreset ID for px30. Signed-off-by: Elaine Zhang Reviewed-by: Rob Herring Signed-off-by: Heiko Stuebner --- include/dt-bindings/clock/px30-cru.h | 389 +++++++++++++++++++++++++++ 1 file changed, 389 insertions(+) create mode 100644 include/dt-bindings/clock/px30-cru.h diff --git a/include/dt-bindings/clock/px30-cru.h b/include/dt-bindings/clock/px30-cru.h new file mode 100644 index 0000000000000..00101479f7c40 --- /dev/null +++ b/include/dt-bindings/clock/px30-cru.h @@ -0,0 +1,389 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#ifndef _DT_BINDINGS_CLK_ROCKCHIP_PX30_H +#define _DT_BINDINGS_CLK_ROCKCHIP_PX30_H + +/* core clocks */ +#define PLL_APLL 1 +#define PLL_DPLL 2 +#define PLL_CPLL 3 +#define PLL_NPLL 4 +#define APLL_BOOST_H 5 +#define APLL_BOOST_L 6 +#define ARMCLK 7 + +/* sclk gates (special clocks) */ +#define USB480M 14 +#define SCLK_PDM 15 +#define SCLK_I2S0_TX 16 +#define SCLK_I2S0_TX_OUT 17 +#define SCLK_I2S0_RX 18 +#define SCLK_I2S0_RX_OUT 19 +#define SCLK_I2S1 20 +#define SCLK_I2S1_OUT 21 +#define SCLK_I2S2 22 +#define SCLK_I2S2_OUT 23 +#define SCLK_UART1 24 +#define SCLK_UART2 25 +#define SCLK_UART3 26 +#define SCLK_UART4 27 +#define SCLK_UART5 28 +#define SCLK_I2C0 29 +#define SCLK_I2C1 30 +#define SCLK_I2C2 31 +#define SCLK_I2C3 32 +#define SCLK_I2C4 33 +#define SCLK_PWM0 34 +#define SCLK_PWM1 35 +#define SCLK_SPI0 36 +#define SCLK_SPI1 37 +#define SCLK_TIMER0 38 +#define SCLK_TIMER1 39 +#define SCLK_TIMER2 40 +#define SCLK_TIMER3 41 +#define SCLK_TIMER4 42 +#define SCLK_TIMER5 43 +#define SCLK_TSADC 44 +#define SCLK_SARADC 45 +#define SCLK_OTP 46 +#define SCLK_OTP_USR 47 +#define SCLK_CRYPTO 48 +#define SCLK_CRYPTO_APK 49 +#define SCLK_DDRC 50 +#define SCLK_ISP 51 +#define SCLK_CIF_OUT 52 +#define SCLK_RGA_CORE 53 +#define SCLK_VOPB_PWM 54 +#define SCLK_NANDC 55 +#define SCLK_SDIO 56 +#define SCLK_EMMC 57 +#define SCLK_SFC 58 +#define SCLK_SDMMC 59 +#define SCLK_OTG_ADP 60 +#define SCLK_GMAC_SRC 61 +#define SCLK_GMAC 62 +#define SCLK_GMAC_RX_TX 63 +#define SCLK_MAC_REF 64 +#define SCLK_MAC_REFOUT 65 +#define SCLK_MAC_OUT 66 +#define SCLK_SDMMC_DRV 67 +#define SCLK_SDMMC_SAMPLE 68 +#define SCLK_SDIO_DRV 69 +#define SCLK_SDIO_SAMPLE 70 +#define SCLK_EMMC_DRV 71 +#define SCLK_EMMC_SAMPLE 72 +#define SCLK_GPU 73 +#define SCLK_PVTM 74 +#define SCLK_CORE_VPU 75 +#define SCLK_GMAC_RMII 76 +#define SCLK_UART2_SRC 77 +#define SCLK_NANDC_DIV 78 +#define SCLK_NANDC_DIV50 79 +#define SCLK_SDIO_DIV 80 +#define SCLK_SDIO_DIV50 81 +#define SCLK_EMMC_DIV 82 +#define SCLK_EMMC_DIV50 83 +#define SCLK_DDRCLK 84 +#define SCLK_UART1_SRC 85 + +/* dclk gates */ +#define DCLK_VOPB 150 +#define DCLK_VOPL 151 + +/* aclk gates */ +#define ACLK_GPU 170 +#define ACLK_BUS_PRE 171 +#define ACLK_CRYPTO 172 +#define ACLK_VI_PRE 173 +#define ACLK_VO_PRE 174 +#define ACLK_VPU 175 +#define ACLK_PERI_PRE 176 +#define ACLK_GMAC 178 +#define ACLK_CIF 179 +#define ACLK_ISP 180 +#define ACLK_VOPB 181 +#define ACLK_VOPL 182 +#define ACLK_RGA 183 +#define ACLK_GIC 184 +#define ACLK_DCF 186 +#define ACLK_DMAC 187 +#define ACLK_BUS_SRC 188 +#define ACLK_PERI_SRC 189 + +/* hclk gates */ +#define HCLK_BUS_PRE 240 +#define HCLK_CRYPTO 241 +#define HCLK_VI_PRE 242 +#define HCLK_VO_PRE 243 +#define HCLK_VPU 244 +#define HCLK_PERI_PRE 245 +#define HCLK_MMC_NAND 246 +#define HCLK_SDMMC 247 +#define HCLK_USB 248 +#define HCLK_CIF 249 +#define HCLK_ISP 250 +#define HCLK_VOPB 251 +#define HCLK_VOPL 252 +#define HCLK_RGA 253 +#define HCLK_NANDC 254 +#define HCLK_SDIO 255 +#define HCLK_EMMC 256 +#define HCLK_SFC 257 +#define HCLK_OTG 258 +#define HCLK_HOST 259 +#define HCLK_HOST_ARB 260 +#define HCLK_PDM 261 +#define HCLK_I2S0 262 +#define HCLK_I2S1 263 +#define HCLK_I2S2 264 + +/* pclk gates */ +#define PCLK_BUS_PRE 320 +#define PCLK_DDR 321 +#define PCLK_VO_PRE 322 +#define PCLK_GMAC 323 +#define PCLK_MIPI_DSI 324 +#define PCLK_MIPIDSIPHY 325 +#define PCLK_MIPICSIPHY 326 +#define PCLK_USB_GRF 327 +#define PCLK_DCF 328 +#define PCLK_UART1 329 +#define PCLK_UART2 330 +#define PCLK_UART3 331 +#define PCLK_UART4 332 +#define PCLK_UART5 333 +#define PCLK_I2C0 334 +#define PCLK_I2C1 335 +#define PCLK_I2C2 336 +#define PCLK_I2C3 337 +#define PCLK_I2C4 338 +#define PCLK_PWM0 339 +#define PCLK_PWM1 340 +#define PCLK_SPI0 341 +#define PCLK_SPI1 342 +#define PCLK_SARADC 343 +#define PCLK_TSADC 344 +#define PCLK_TIMER 345 +#define PCLK_OTP_NS 346 +#define PCLK_WDT_NS 347 +#define PCLK_GPIO1 348 +#define PCLK_GPIO2 349 +#define PCLK_GPIO3 350 +#define PCLK_ISP 351 +#define PCLK_CIF 352 +#define PCLK_OTP_PHY 353 + +#define CLK_NR_CLKS (PCLK_OTP_PHY + 1) + +/* pmu-clocks indices */ + +#define PLL_GPLL 1 + +#define SCLK_RTC32K_PMU 4 +#define SCLK_WIFI_PMU 5 +#define SCLK_UART0_PMU 6 +#define SCLK_PVTM_PMU 7 +#define PCLK_PMU_PRE 8 +#define SCLK_REF24M_PMU 9 +#define SCLK_USBPHY_REF 10 +#define SCLK_MIPIDSIPHY_REF 11 + +#define XIN24M_DIV 12 + +#define PCLK_GPIO0_PMU 20 +#define PCLK_UART0_PMU 21 + +#define CLKPMU_NR_CLKS (PCLK_UART0_PMU + 1) + +/* soft-reset indices */ +#define SRST_CORE0_PO 0 +#define SRST_CORE1_PO 1 +#define SRST_CORE2_PO 2 +#define SRST_CORE3_PO 3 +#define SRST_CORE0 4 +#define SRST_CORE1 5 +#define SRST_CORE2 6 +#define SRST_CORE3 7 +#define SRST_CORE0_DBG 8 +#define SRST_CORE1_DBG 9 +#define SRST_CORE2_DBG 10 +#define SRST_CORE3_DBG 11 +#define SRST_TOPDBG 12 +#define SRST_CORE_NOC 13 +#define SRST_STRC_A 14 +#define SRST_L2C 15 + +#define SRST_DAP 16 +#define SRST_CORE_PVTM 17 +#define SRST_GPU 18 +#define SRST_GPU_NIU 19 +#define SRST_UPCTL2 20 +#define SRST_UPCTL2_A 21 +#define SRST_UPCTL2_P 22 +#define SRST_MSCH 23 +#define SRST_MSCH_P 24 +#define SRST_DDRMON_P 25 +#define SRST_DDRSTDBY_P 26 +#define SRST_DDRSTDBY 27 +#define SRST_DDRGRF_p 28 +#define SRST_AXI_SPLIT_A 29 +#define SRST_AXI_CMD_A 30 +#define SRST_AXI_CMD_P 31 + +#define SRST_DDRPHY 32 +#define SRST_DDRPHYDIV 33 +#define SRST_DDRPHY_P 34 +#define SRST_VPU_A 36 +#define SRST_VPU_NIU_A 37 +#define SRST_VPU_H 38 +#define SRST_VPU_NIU_H 39 +#define SRST_VI_NIU_A 40 +#define SRST_VI_NIU_H 41 +#define SRST_ISP_H 42 +#define SRST_ISP 43 +#define SRST_CIF_A 44 +#define SRST_CIF_H 45 +#define SRST_CIF_PCLKIN 46 +#define SRST_MIPICSIPHY_P 47 + +#define SRST_VO_NIU_A 48 +#define SRST_VO_NIU_H 49 +#define SRST_VO_NIU_P 50 +#define SRST_VOPB_A 51 +#define SRST_VOPB_H 52 +#define SRST_VOPB 53 +#define SRST_PWM_VOPB 54 +#define SRST_VOPL_A 55 +#define SRST_VOPL_H 56 +#define SRST_VOPL 57 +#define SRST_RGA_A 58 +#define SRST_RGA_H 59 +#define SRST_RGA 60 +#define SRST_MIPIDSI_HOST_P 61 +#define SRST_MIPIDSIPHY_P 62 +#define SRST_VPU_CORE 63 + +#define SRST_PERI_NIU_A 64 +#define SRST_USB_NIU_H 65 +#define SRST_USB2OTG_H 66 +#define SRST_USB2OTG 67 +#define SRST_USB2OTG_ADP 68 +#define SRST_USB2HOST_H 69 +#define SRST_USB2HOST_ARB_H 70 +#define SRST_USB2HOST_AUX_H 71 +#define SRST_USB2HOST_EHCI 72 +#define SRST_USB2HOST 73 +#define SRST_USBPHYPOR 74 +#define SRST_USBPHY_OTG_PORT 75 +#define SRST_USBPHY_HOST_PORT 76 +#define SRST_USBPHY_GRF 77 +#define SRST_CPU_BOOST_P 78 +#define SRST_CPU_BOOST 79 + +#define SRST_MMC_NAND_NIU_H 80 +#define SRST_SDIO_H 81 +#define SRST_EMMC_H 82 +#define SRST_SFC_H 83 +#define SRST_SFC 84 +#define SRST_SDCARD_NIU_H 85 +#define SRST_SDMMC_H 86 +#define SRST_NANDC_H 89 +#define SRST_NANDC 90 +#define SRST_GMAC_NIU_A 92 +#define SRST_GMAC_NIU_P 93 +#define SRST_GMAC_A 94 + +#define SRST_PMU_NIU_P 96 +#define SRST_PMU_SGRF_P 97 +#define SRST_PMU_GRF_P 98 +#define SRST_PMU 99 +#define SRST_PMU_MEM_P 100 +#define SRST_PMU_GPIO0_P 101 +#define SRST_PMU_UART0_P 102 +#define SRST_PMU_CRU_P 103 +#define SRST_PMU_PVTM 104 +#define SRST_PMU_UART 105 +#define SRST_PMU_NIU_H 106 +#define SRST_PMU_DDR_FAIL_SAVE 107 +#define SRST_PMU_CORE_PERF_A 108 +#define SRST_PMU_CORE_GRF_P 109 +#define SRST_PMU_GPU_PERF_A 110 +#define SRST_PMU_GPU_GRF_P 111 + +#define SRST_CRYPTO_NIU_A 112 +#define SRST_CRYPTO_NIU_H 113 +#define SRST_CRYPTO_A 114 +#define SRST_CRYPTO_H 115 +#define SRST_CRYPTO 116 +#define SRST_CRYPTO_APK 117 +#define SRST_BUS_NIU_H 120 +#define SRST_USB_NIU_P 121 +#define SRST_BUS_TOP_NIU_P 122 +#define SRST_INTMEM_A 123 +#define SRST_GIC_A 124 +#define SRST_ROM_H 126 +#define SRST_DCF_A 127 + +#define SRST_DCF_P 128 +#define SRST_PDM_H 129 +#define SRST_PDM 130 +#define SRST_I2S0_H 131 +#define SRST_I2S0_TX 132 +#define SRST_I2S1_H 133 +#define SRST_I2S1 134 +#define SRST_I2S2_H 135 +#define SRST_I2S2 136 +#define SRST_UART1_P 137 +#define SRST_UART1 138 +#define SRST_UART2_P 139 +#define SRST_UART2 140 +#define SRST_UART3_P 141 +#define SRST_UART3 142 +#define SRST_UART4_P 143 + +#define SRST_UART4 144 +#define SRST_UART5_P 145 +#define SRST_UART5 146 +#define SRST_I2C0_P 147 +#define SRST_I2C0 148 +#define SRST_I2C1_P 149 +#define SRST_I2C1 150 +#define SRST_I2C2_P 151 +#define SRST_I2C2 152 +#define SRST_I2C3_P 153 +#define SRST_I2C3 154 +#define SRST_PWM0_P 157 +#define SRST_PWM0 158 +#define SRST_PWM1_P 159 + +#define SRST_PWM1 160 +#define SRST_SPI0_P 161 +#define SRST_SPI0 162 +#define SRST_SPI1_P 163 +#define SRST_SPI1 164 +#define SRST_SARADC_P 165 +#define SRST_SARADC 166 +#define SRST_TSADC_P 167 +#define SRST_TSADC 168 +#define SRST_TIMER_P 169 +#define SRST_TIMER0 170 +#define SRST_TIMER1 171 +#define SRST_TIMER2 172 +#define SRST_TIMER3 173 +#define SRST_TIMER4 174 +#define SRST_TIMER5 175 + +#define SRST_OTP_NS_P 176 +#define SRST_OTP_NS_SBPI 177 +#define SRST_OTP_NS_USR 178 +#define SRST_OTP_PHY_P 179 +#define SRST_OTP_PHY 180 +#define SRST_WDT_NS_P 181 +#define SRST_GPIO1_P 182 +#define SRST_GPIO2_P 183 +#define SRST_GPIO3_P 184 +#define SRST_SGRF_P 185 +#define SRST_GRF_P 186 +#define SRST_I2S0_RX 191 + +#endif From 97752d2343518169db7e1fb9da7f2386cf2c3727 Mon Sep 17 00:00:00 2001 From: Elaine Zhang Date: Fri, 15 Jun 2018 10:16:48 +0800 Subject: [PATCH 09/27] dt-bindings: add bindings for px30 clock controller Add devicetree bindings for Rockchip cru which found on Rockchip SoCs. Signed-off-by: Elaine Zhang Reviewed-by: Rob Herring Signed-off-by: Heiko Stuebner --- .../bindings/clock/rockchip,px30-cru.txt | 65 +++++++++++++++++++ 1 file changed, 65 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/rockchip,px30-cru.txt diff --git a/Documentation/devicetree/bindings/clock/rockchip,px30-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,px30-cru.txt new file mode 100644 index 0000000000000..39f0c1ac84ee0 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/rockchip,px30-cru.txt @@ -0,0 +1,65 @@ +* Rockchip PX30 Clock and Reset Unit + +The PX30 clock controller generates and supplies clock to various +controllers within the SoC and also implements a reset controller for SoC +peripherals. + +Required Properties: + +- compatible: PMU for CRU should be "rockchip,px30-pmu-cru" +- compatible: CRU should be "rockchip,px30-cru" +- reg: physical base address of the controller and length of memory mapped + region. +- #clock-cells: should be 1. +- #reset-cells: should be 1. + +Optional Properties: + +- rockchip,grf: phandle to the syscon managing the "general register files" + If missing, pll rates are not changeable, due to the missing pll lock status. + +Each clock is assigned an identifier and client nodes can use this identifier +to specify the clock which they consume. All available clocks are defined as +preprocessor macros in the dt-bindings/clock/px30-cru.h headers and can be +used in device tree sources. Similar macros exist for the reset sources in +these files. + +External clocks: + +There are several clocks that are generated outside the SoC. It is expected +that they are defined using standard clock bindings with following +clock-output-names: + - "xin24m" - crystal input - required, + - "xin32k" - rtc clock - optional, + - "i2sx_clkin" - external I2S clock - optional, + - "gmac_clkin" - external GMAC clock - optional + +Example: Clock controller node: + + pmucru: clock-controller@ff2bc000 { + compatible = "rockchip,px30-pmucru"; + reg = <0x0 0xff2bc000 0x0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + cru: clock-controller@ff2b0000 { + compatible = "rockchip,px30-cru"; + reg = <0x0 0xff2b0000 0x0 0x1000>; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + +Example: UART controller node that consumes the clock generated by the clock + controller: + + uart0: serial@ff030000 { + compatible = "rockchip,px30-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff030000 0x0 0x100>; + interrupts = ; + clocks = <&pmucru SCLK_UART0_PMU>, <&pmucru PCLK_UART0_PMU>; + clock-names = "baudclk", "apb_pclk"; + reg-shift = <2>; + reg-io-width = <4>; + }; From 956060a52795a060833e8de2d1bb89209e61bed2 Mon Sep 17 00:00:00 2001 From: Elaine Zhang Date: Fri, 15 Jun 2018 10:16:50 +0800 Subject: [PATCH 10/27] clk: rockchip: add support for half divider The new Rockchip socs have optional half divider: The formula is shown as: freq_out = 2*freq_in / (2*div + 3) Is this the same for all of new SoCs. So we use "branch_half_divider" + "COMPOSITE_NOMUX_HALFDIV \ DIV_HALF \ COMPOSITE_HALFDIV \ CMPOSITE_NOGATE_HALFDIV" to hook that special divider clock-type into our clock-tree. Signed-off-by: Elaine Zhang Signed-off-by: Heiko Stuebner --- drivers/clk/rockchip/Makefile | 1 + drivers/clk/rockchip/clk-half-divider.c | 227 ++++++++++++++++++++++++ drivers/clk/rockchip/clk.c | 10 ++ drivers/clk/rockchip/clk.h | 85 +++++++++ 4 files changed, 323 insertions(+) create mode 100644 drivers/clk/rockchip/clk-half-divider.c diff --git a/drivers/clk/rockchip/Makefile b/drivers/clk/rockchip/Makefile index 98e7b9429b833..4d4b7dee16755 100644 --- a/drivers/clk/rockchip/Makefile +++ b/drivers/clk/rockchip/Makefile @@ -6,6 +6,7 @@ obj-y += clk.o obj-y += clk-pll.o obj-y += clk-cpu.o +obj-y += clk-half-divider.o obj-y += clk-inverter.o obj-y += clk-mmc-phase.o obj-y += clk-muxgrf.o diff --git a/drivers/clk/rockchip/clk-half-divider.c b/drivers/clk/rockchip/clk-half-divider.c new file mode 100644 index 0000000000000..b8da6e799423a --- /dev/null +++ b/drivers/clk/rockchip/clk-half-divider.c @@ -0,0 +1,227 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2018 Fuzhou Rockchip Electronics Co., Ltd + */ + +#include +#include +#include "clk.h" + +#define div_mask(width) ((1 << (width)) - 1) + +static bool _is_best_half_div(unsigned long rate, unsigned long now, + unsigned long best, unsigned long flags) +{ + if (flags & CLK_DIVIDER_ROUND_CLOSEST) + return abs(rate - now) < abs(rate - best); + + return now <= rate && now > best; +} + +static unsigned long clk_half_divider_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct clk_divider *divider = to_clk_divider(hw); + unsigned int val; + + val = clk_readl(divider->reg) >> divider->shift; + val &= div_mask(divider->width); + val = val * 2 + 3; + + return DIV_ROUND_UP_ULL(((u64)parent_rate * 2), val); +} + +static int clk_half_divider_bestdiv(struct clk_hw *hw, unsigned long rate, + unsigned long *best_parent_rate, u8 width, + unsigned long flags) +{ + unsigned int i, bestdiv = 0; + unsigned long parent_rate, best = 0, now, maxdiv; + unsigned long parent_rate_saved = *best_parent_rate; + + if (!rate) + rate = 1; + + maxdiv = div_mask(width); + + if (!(clk_hw_get_flags(hw) & CLK_SET_RATE_PARENT)) { + parent_rate = *best_parent_rate; + bestdiv = DIV_ROUND_UP_ULL(((u64)parent_rate * 2), rate); + if (bestdiv < 3) + bestdiv = 0; + else + bestdiv = (bestdiv - 3) / 2; + bestdiv = bestdiv > maxdiv ? maxdiv : bestdiv; + return bestdiv; + } + + /* + * The maximum divider we can use without overflowing + * unsigned long in rate * i below + */ + maxdiv = min(ULONG_MAX / rate, maxdiv); + + for (i = 0; i <= maxdiv; i++) { + if (((u64)rate * (i * 2 + 3)) == ((u64)parent_rate_saved * 2)) { + /* + * It's the most ideal case if the requested rate can be + * divided from parent clock without needing to change + * parent rate, so return the divider immediately. + */ + *best_parent_rate = parent_rate_saved; + return i; + } + parent_rate = clk_hw_round_rate(clk_hw_get_parent(hw), + ((u64)rate * (i * 2 + 3)) / 2); + now = DIV_ROUND_UP_ULL(((u64)parent_rate * 2), + (i * 2 + 3)); + + if (_is_best_half_div(rate, now, best, flags)) { + bestdiv = i; + best = now; + *best_parent_rate = parent_rate; + } + } + + if (!bestdiv) { + bestdiv = div_mask(width); + *best_parent_rate = clk_hw_round_rate(clk_hw_get_parent(hw), 1); + } + + return bestdiv; +} + +static long clk_half_divider_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *prate) +{ + struct clk_divider *divider = to_clk_divider(hw); + int div; + + div = clk_half_divider_bestdiv(hw, rate, prate, + divider->width, + divider->flags); + + return DIV_ROUND_UP_ULL(((u64)*prate * 2), div * 2 + 3); +} + +static int clk_half_divider_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct clk_divider *divider = to_clk_divider(hw); + unsigned int value; + unsigned long flags = 0; + u32 val; + + value = DIV_ROUND_UP_ULL(((u64)parent_rate * 2), rate); + value = (value - 3) / 2; + value = min_t(unsigned int, value, div_mask(divider->width)); + + if (divider->lock) + spin_lock_irqsave(divider->lock, flags); + else + __acquire(divider->lock); + + if (divider->flags & CLK_DIVIDER_HIWORD_MASK) { + val = div_mask(divider->width) << (divider->shift + 16); + } else { + val = clk_readl(divider->reg); + val &= ~(div_mask(divider->width) << divider->shift); + } + val |= value << divider->shift; + clk_writel(val, divider->reg); + + if (divider->lock) + spin_unlock_irqrestore(divider->lock, flags); + else + __release(divider->lock); + + return 0; +} + +const struct clk_ops clk_half_divider_ops = { + .recalc_rate = clk_half_divider_recalc_rate, + .round_rate = clk_half_divider_round_rate, + .set_rate = clk_half_divider_set_rate, +}; +EXPORT_SYMBOL_GPL(clk_half_divider_ops); + +/** + * Register a clock branch. + * Most clock branches have a form like + * + * src1 --|--\ + * |M |--[GATE]-[DIV]- + * src2 --|--/ + * + * sometimes without one of those components. + */ +struct clk *rockchip_clk_register_halfdiv(const char *name, + const char *const *parent_names, + u8 num_parents, void __iomem *base, + int muxdiv_offset, u8 mux_shift, + u8 mux_width, u8 mux_flags, + u8 div_shift, u8 div_width, + u8 div_flags, int gate_offset, + u8 gate_shift, u8 gate_flags, + unsigned long flags, + spinlock_t *lock) +{ + struct clk *clk; + struct clk_mux *mux = NULL; + struct clk_gate *gate = NULL; + struct clk_divider *div = NULL; + const struct clk_ops *mux_ops = NULL, *div_ops = NULL, + *gate_ops = NULL; + + if (num_parents > 1) { + mux = kzalloc(sizeof(*mux), GFP_KERNEL); + if (!mux) + return ERR_PTR(-ENOMEM); + + mux->reg = base + muxdiv_offset; + mux->shift = mux_shift; + mux->mask = BIT(mux_width) - 1; + mux->flags = mux_flags; + mux->lock = lock; + mux_ops = (mux_flags & CLK_MUX_READ_ONLY) ? &clk_mux_ro_ops + : &clk_mux_ops; + } + + if (gate_offset >= 0) { + gate = kzalloc(sizeof(*gate), GFP_KERNEL); + if (!gate) + goto err_gate; + + gate->flags = gate_flags; + gate->reg = base + gate_offset; + gate->bit_idx = gate_shift; + gate->lock = lock; + gate_ops = &clk_gate_ops; + } + + if (div_width > 0) { + div = kzalloc(sizeof(*div), GFP_KERNEL); + if (!div) + goto err_div; + + div->flags = div_flags; + div->reg = base + muxdiv_offset; + div->shift = div_shift; + div->width = div_width; + div->lock = lock; + div_ops = &clk_half_divider_ops; + } + + clk = clk_register_composite(NULL, name, parent_names, num_parents, + mux ? &mux->hw : NULL, mux_ops, + div ? &div->hw : NULL, div_ops, + gate ? &gate->hw : NULL, gate_ops, + flags); + + return clk; +err_div: + kfree(gate); +err_gate: + kfree(mux); + return ERR_PTR(-ENOMEM); +} diff --git a/drivers/clk/rockchip/clk.c b/drivers/clk/rockchip/clk.c index 326b3fa44f5da..c3ad929658239 100644 --- a/drivers/clk/rockchip/clk.c +++ b/drivers/clk/rockchip/clk.c @@ -492,6 +492,16 @@ void __init rockchip_clk_register_branches( list->gate_flags, flags, list->child, &ctx->lock); break; + case branch_half_divider: + clk = rockchip_clk_register_halfdiv(list->name, + list->parent_names, list->num_parents, + ctx->reg_base, list->muxdiv_offset, + list->mux_shift, list->mux_width, + list->mux_flags, list->div_shift, + list->div_width, list->div_flags, + list->gate_offset, list->gate_shift, + list->gate_flags, flags, &ctx->lock); + break; case branch_gate: flags |= CLK_SET_RATE_PARENT; diff --git a/drivers/clk/rockchip/clk.h b/drivers/clk/rockchip/clk.h index ef601dded32c4..23c569a875d4b 100644 --- a/drivers/clk/rockchip/clk.h +++ b/drivers/clk/rockchip/clk.h @@ -354,6 +354,7 @@ enum rockchip_clk_branch_type { branch_inverter, branch_factor, branch_ddrclk, + branch_half_divider, }; struct rockchip_clk_branch { @@ -684,6 +685,79 @@ struct rockchip_clk_branch { .gate_flags = gf, \ } +#define COMPOSITE_HALFDIV(_id, cname, pnames, f, mo, ms, mw, mf, ds, dw,\ + df, go, gs, gf) \ + { \ + .id = _id, \ + .branch_type = branch_half_divider, \ + .name = cname, \ + .parent_names = pnames, \ + .num_parents = ARRAY_SIZE(pnames), \ + .flags = f, \ + .muxdiv_offset = mo, \ + .mux_shift = ms, \ + .mux_width = mw, \ + .mux_flags = mf, \ + .div_shift = ds, \ + .div_width = dw, \ + .div_flags = df, \ + .gate_offset = go, \ + .gate_shift = gs, \ + .gate_flags = gf, \ + } + +#define COMPOSITE_NOGATE_HALFDIV(_id, cname, pnames, f, mo, ms, mw, mf, \ + ds, dw, df) \ + { \ + .id = _id, \ + .branch_type = branch_half_divider, \ + .name = cname, \ + .parent_names = pnames, \ + .num_parents = ARRAY_SIZE(pnames), \ + .flags = f, \ + .muxdiv_offset = mo, \ + .mux_shift = ms, \ + .mux_width = mw, \ + .mux_flags = mf, \ + .div_shift = ds, \ + .div_width = dw, \ + .div_flags = df, \ + .gate_offset = -1, \ + } + +#define COMPOSITE_NOMUX_HALFDIV(_id, cname, pname, f, mo, ds, dw, df, \ + go, gs, gf) \ + { \ + .id = _id, \ + .branch_type = branch_half_divider, \ + .name = cname, \ + .parent_names = (const char *[]){ pname }, \ + .num_parents = 1, \ + .flags = f, \ + .muxdiv_offset = mo, \ + .div_shift = ds, \ + .div_width = dw, \ + .div_flags = df, \ + .gate_offset = go, \ + .gate_shift = gs, \ + .gate_flags = gf, \ + } + +#define DIV_HALF(_id, cname, pname, f, o, s, w, df) \ + { \ + .id = _id, \ + .branch_type = branch_half_divider, \ + .name = cname, \ + .parent_names = (const char *[]){ pname }, \ + .num_parents = 1, \ + .flags = f, \ + .muxdiv_offset = o, \ + .div_shift = s, \ + .div_width = w, \ + .div_flags = df, \ + .gate_offset = -1, \ + } + struct rockchip_clk_provider *rockchip_clk_init(struct device_node *np, void __iomem *base, unsigned long nr_clks); void rockchip_clk_of_add_provider(struct device_node *np, @@ -708,6 +782,17 @@ void rockchip_register_restart_notifier(struct rockchip_clk_provider *ctx, #define ROCKCHIP_SOFTRST_HIWORD_MASK BIT(0) +struct clk *rockchip_clk_register_halfdiv(const char *name, + const char *const *parent_names, + u8 num_parents, void __iomem *base, + int muxdiv_offset, u8 mux_shift, + u8 mux_width, u8 mux_flags, + u8 div_shift, u8 div_width, + u8 div_flags, int gate_offset, + u8 gate_shift, u8 gate_flags, + unsigned long flags, + spinlock_t *lock); + #ifdef CONFIG_RESET_CONTROLLER void rockchip_register_softrst(struct device_node *np, unsigned int num_regs, From 243229b11121fbc90d9ee875292dfc75ecf53040 Mon Sep 17 00:00:00 2001 From: Elaine Zhang Date: Fri, 15 Jun 2018 10:16:51 +0800 Subject: [PATCH 11/27] clk: rockchip: add clock controller for px30 Add the clock tree definition for the new px30 SoC. Signed-off-by: Elaine Zhang Signed-off-by: Heiko Stuebner --- drivers/clk/rockchip/Makefile | 1 + drivers/clk/rockchip/clk-px30.c | 1039 +++++++++++++++++++++++++++++++ drivers/clk/rockchip/clk.h | 41 +- 3 files changed, 1080 insertions(+), 1 deletion(-) create mode 100644 drivers/clk/rockchip/clk-px30.c diff --git a/drivers/clk/rockchip/Makefile b/drivers/clk/rockchip/Makefile index 4d4b7dee16755..ff35ab463a6f7 100644 --- a/drivers/clk/rockchip/Makefile +++ b/drivers/clk/rockchip/Makefile @@ -13,6 +13,7 @@ obj-y += clk-muxgrf.o obj-y += clk-ddr.o obj-$(CONFIG_RESET_CONTROLLER) += softrst.o +obj-y += clk-px30.o obj-y += clk-rv1108.o obj-y += clk-rk3036.o obj-y += clk-rk3128.o diff --git a/drivers/clk/rockchip/clk-px30.c b/drivers/clk/rockchip/clk-px30.c new file mode 100644 index 0000000000000..601a77f1af789 --- /dev/null +++ b/drivers/clk/rockchip/clk-px30.c @@ -0,0 +1,1039 @@ +/* + * Copyright (c) 2018 Rockchip Electronics Co. Ltd. + * Author: Elaine Zhang + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include "clk.h" + +#define PX30_GRF_SOC_STATUS0 0x480 + +enum px30_plls { + apll, dpll, cpll, npll, apll_b_h, apll_b_l, +}; + +enum px30_pmu_plls { + gpll, +}; + +static struct rockchip_pll_rate_table px30_pll_rates[] = { + /* _mhz, _refdiv, _fbdiv, _postdiv1, _postdiv2, _dsmpd, _frac */ + RK3036_PLL_RATE(1608000000, 1, 67, 1, 1, 1, 0), + RK3036_PLL_RATE(1584000000, 1, 66, 1, 1, 1, 0), + RK3036_PLL_RATE(1560000000, 1, 65, 1, 1, 1, 0), + RK3036_PLL_RATE(1536000000, 1, 64, 1, 1, 1, 0), + RK3036_PLL_RATE(1512000000, 1, 63, 1, 1, 1, 0), + RK3036_PLL_RATE(1488000000, 1, 62, 1, 1, 1, 0), + RK3036_PLL_RATE(1464000000, 1, 61, 1, 1, 1, 0), + RK3036_PLL_RATE(1440000000, 1, 60, 1, 1, 1, 0), + RK3036_PLL_RATE(1416000000, 1, 59, 1, 1, 1, 0), + RK3036_PLL_RATE(1392000000, 1, 58, 1, 1, 1, 0), + RK3036_PLL_RATE(1368000000, 1, 57, 1, 1, 1, 0), + RK3036_PLL_RATE(1344000000, 1, 56, 1, 1, 1, 0), + RK3036_PLL_RATE(1320000000, 1, 55, 1, 1, 1, 0), + RK3036_PLL_RATE(1296000000, 1, 54, 1, 1, 1, 0), + RK3036_PLL_RATE(1272000000, 1, 53, 1, 1, 1, 0), + RK3036_PLL_RATE(1248000000, 1, 52, 1, 1, 1, 0), + RK3036_PLL_RATE(1200000000, 1, 50, 1, 1, 1, 0), + RK3036_PLL_RATE(1188000000, 2, 99, 1, 1, 1, 0), + RK3036_PLL_RATE(1104000000, 1, 46, 1, 1, 1, 0), + RK3036_PLL_RATE(1100000000, 12, 550, 1, 1, 1, 0), + RK3036_PLL_RATE(1008000000, 1, 84, 2, 1, 1, 0), + RK3036_PLL_RATE(1000000000, 6, 500, 2, 1, 1, 0), + RK3036_PLL_RATE(984000000, 1, 82, 2, 1, 1, 0), + RK3036_PLL_RATE(960000000, 1, 80, 2, 1, 1, 0), + RK3036_PLL_RATE(936000000, 1, 78, 2, 1, 1, 0), + RK3036_PLL_RATE(912000000, 1, 76, 2, 1, 1, 0), + RK3036_PLL_RATE(900000000, 4, 300, 2, 1, 1, 0), + RK3036_PLL_RATE(888000000, 1, 74, 2, 1, 1, 0), + RK3036_PLL_RATE(864000000, 1, 72, 2, 1, 1, 0), + RK3036_PLL_RATE(840000000, 1, 70, 2, 1, 1, 0), + RK3036_PLL_RATE(816000000, 1, 68, 2, 1, 1, 0), + RK3036_PLL_RATE(800000000, 6, 400, 2, 1, 1, 0), + RK3036_PLL_RATE(700000000, 6, 350, 2, 1, 1, 0), + RK3036_PLL_RATE(696000000, 1, 58, 2, 1, 1, 0), + RK3036_PLL_RATE(624000000, 1, 52, 2, 1, 1, 0), + RK3036_PLL_RATE(600000000, 1, 75, 3, 1, 1, 0), + RK3036_PLL_RATE(594000000, 2, 99, 2, 1, 1, 0), + RK3036_PLL_RATE(504000000, 1, 63, 3, 1, 1, 0), + RK3036_PLL_RATE(500000000, 6, 250, 2, 1, 1, 0), + RK3036_PLL_RATE(408000000, 1, 68, 2, 2, 1, 0), + RK3036_PLL_RATE(312000000, 1, 52, 2, 2, 1, 0), + RK3036_PLL_RATE(216000000, 1, 72, 4, 2, 1, 0), + RK3036_PLL_RATE(96000000, 1, 64, 4, 4, 1, 0), + { /* sentinel */ }, +}; + +#define PX30_DIV_ACLKM_MASK 0x7 +#define PX30_DIV_ACLKM_SHIFT 12 +#define PX30_DIV_PCLK_DBG_MASK 0xf +#define PX30_DIV_PCLK_DBG_SHIFT 8 + +#define PX30_CLKSEL0(_aclk_core, _pclk_dbg) \ +{ \ + .reg = PX30_CLKSEL_CON(0), \ + .val = HIWORD_UPDATE(_aclk_core, PX30_DIV_ACLKM_MASK, \ + PX30_DIV_ACLKM_SHIFT) | \ + HIWORD_UPDATE(_pclk_dbg, PX30_DIV_PCLK_DBG_MASK, \ + PX30_DIV_PCLK_DBG_SHIFT), \ +} + +#define PX30_CPUCLK_RATE(_prate, _aclk_core, _pclk_dbg) \ +{ \ + .prate = _prate, \ + .divs = { \ + PX30_CLKSEL0(_aclk_core, _pclk_dbg), \ + }, \ +} + +static struct rockchip_cpuclk_rate_table px30_cpuclk_rates[] __initdata = { + PX30_CPUCLK_RATE(1608000000, 1, 7), + PX30_CPUCLK_RATE(1584000000, 1, 7), + PX30_CPUCLK_RATE(1560000000, 1, 7), + PX30_CPUCLK_RATE(1536000000, 1, 7), + PX30_CPUCLK_RATE(1512000000, 1, 7), + PX30_CPUCLK_RATE(1488000000, 1, 5), + PX30_CPUCLK_RATE(1464000000, 1, 5), + PX30_CPUCLK_RATE(1440000000, 1, 5), + PX30_CPUCLK_RATE(1416000000, 1, 5), + PX30_CPUCLK_RATE(1392000000, 1, 5), + PX30_CPUCLK_RATE(1368000000, 1, 5), + PX30_CPUCLK_RATE(1344000000, 1, 5), + PX30_CPUCLK_RATE(1320000000, 1, 5), + PX30_CPUCLK_RATE(1296000000, 1, 5), + PX30_CPUCLK_RATE(1272000000, 1, 5), + PX30_CPUCLK_RATE(1248000000, 1, 5), + PX30_CPUCLK_RATE(1224000000, 1, 5), + PX30_CPUCLK_RATE(1200000000, 1, 5), + PX30_CPUCLK_RATE(1104000000, 1, 5), + PX30_CPUCLK_RATE(1008000000, 1, 5), + PX30_CPUCLK_RATE(912000000, 1, 5), + PX30_CPUCLK_RATE(816000000, 1, 3), + PX30_CPUCLK_RATE(696000000, 1, 3), + PX30_CPUCLK_RATE(600000000, 1, 3), + PX30_CPUCLK_RATE(408000000, 1, 1), + PX30_CPUCLK_RATE(312000000, 1, 1), + PX30_CPUCLK_RATE(216000000, 1, 1), + PX30_CPUCLK_RATE(96000000, 1, 1), +}; + +static const struct rockchip_cpuclk_reg_data px30_cpuclk_data = { + .core_reg = PX30_CLKSEL_CON(0), + .div_core_shift = 0, + .div_core_mask = 0xf, + .mux_core_alt = 1, + .mux_core_main = 0, + .mux_core_shift = 7, + .mux_core_mask = 0x1, +}; + +PNAME(mux_pll_p) = { "xin24m"}; +PNAME(mux_usb480m_p) = { "xin24m", "usb480m_phy", "clk_rtc32k_pmu" }; +PNAME(mux_armclk_p) = { "apll_core", "gpll_core" }; +PNAME(mux_ddrphy_p) = { "dpll_ddr", "gpll_ddr" }; +PNAME(mux_ddrstdby_p) = { "clk_ddrphy1x", "clk_stdby_2wrap" }; +PNAME(mux_4plls_p) = { "gpll", "dummy_cpll", "usb480m", "npll" }; +PNAME(mux_cpll_npll_p) = { "cpll", "npll" }; +PNAME(mux_npll_cpll_p) = { "npll", "cpll" }; +PNAME(mux_gpll_cpll_p) = { "gpll", "dummy_cpll" }; +PNAME(mux_gpll_npll_p) = { "gpll", "npll" }; +PNAME(mux_gpll_xin24m_p) = { "gpll", "xin24m"}; +PNAME(mux_gpll_cpll_npll_p) = { "gpll", "dummy_cpll", "npll" }; +PNAME(mux_gpll_cpll_npll_xin24m_p) = { "gpll", "dummy_cpll", "npll", "xin24m" }; +PNAME(mux_gpll_xin24m_npll_p) = { "gpll", "xin24m", "npll"}; +PNAME(mux_pdm_p) = { "clk_pdm_src", "clk_pdm_frac" }; +PNAME(mux_i2s0_tx_p) = { "clk_i2s0_tx_src", "clk_i2s0_tx_frac", "mclk_i2s0_tx_in", "xin12m"}; +PNAME(mux_i2s0_rx_p) = { "clk_i2s0_rx_src", "clk_i2s0_rx_frac", "mclk_i2s0_rx_in", "xin12m"}; +PNAME(mux_i2s1_p) = { "clk_i2s1_src", "clk_i2s1_frac", "i2s1_clkin", "xin12m"}; +PNAME(mux_i2s2_p) = { "clk_i2s2_src", "clk_i2s2_frac", "i2s2_clkin", "xin12m"}; +PNAME(mux_i2s0_tx_out_p) = { "clk_i2s0_tx", "xin12m", "clk_i2s0_rx"}; +PNAME(mux_i2s0_rx_out_p) = { "clk_i2s0_rx", "xin12m", "clk_i2s0_tx"}; +PNAME(mux_i2s1_out_p) = { "clk_i2s1", "xin12m"}; +PNAME(mux_i2s2_out_p) = { "clk_i2s2", "xin12m"}; +PNAME(mux_i2s0_tx_rx_p) = { "clk_i2s0_tx_mux", "clk_i2s0_rx_mux"}; +PNAME(mux_i2s0_rx_tx_p) = { "clk_i2s0_rx_mux", "clk_i2s0_tx_mux"}; +PNAME(mux_uart_src_p) = { "gpll", "xin24m", "usb480m", "npll" }; +PNAME(mux_uart1_p) = { "clk_uart1_src", "clk_uart1_np5", "clk_uart1_frac" }; +PNAME(mux_uart2_p) = { "clk_uart2_src", "clk_uart2_np5", "clk_uart2_frac" }; +PNAME(mux_uart3_p) = { "clk_uart3_src", "clk_uart3_np5", "clk_uart3_frac" }; +PNAME(mux_uart4_p) = { "clk_uart4_src", "clk_uart4_np5", "clk_uart4_frac" }; +PNAME(mux_uart5_p) = { "clk_uart5_src", "clk_uart5_np5", "clk_uart5_frac" }; +PNAME(mux_cif_out_p) = { "xin24m", "dummy_cpll", "npll", "usb480m" }; +PNAME(mux_dclk_vopb_p) = { "dclk_vopb_src", "dclk_vopb_frac", "xin24m" }; +PNAME(mux_dclk_vopl_p) = { "dclk_vopl_src", "dclk_vopl_frac", "xin24m" }; +PNAME(mux_gmac_p) = { "clk_gmac_src", "gmac_clkin" }; +PNAME(mux_gmac_rmii_sel_p) = { "clk_gmac_rx_tx_div20", "clk_gmac_rx_tx_div2" }; +PNAME(mux_rtc32k_pmu_p) = { "xin32k", "pmu_pvtm_32k", "clk_rtc32k_frac", }; +PNAME(mux_wifi_pmu_p) = { "xin24m", "clk_wifi_pmu_src" }; +PNAME(mux_uart0_pmu_p) = { "clk_uart0_pmu_src", "clk_uart0_np5", "clk_uart0_frac" }; +PNAME(mux_usbphy_ref_p) = { "xin24m", "clk_ref24m_pmu" }; +PNAME(mux_mipidsiphy_ref_p) = { "xin24m", "clk_ref24m_pmu" }; +PNAME(mux_gpu_p) = { "clk_gpu_div", "clk_gpu_np5" }; + +static struct rockchip_pll_clock px30_pll_clks[] __initdata = { + [apll] = PLL(pll_rk3328, PLL_APLL, "apll", mux_pll_p, + 0, PX30_PLL_CON(0), + PX30_MODE_CON, 0, 0, 0, px30_pll_rates), + [dpll] = PLL(pll_rk3328, PLL_DPLL, "dpll", mux_pll_p, + 0, PX30_PLL_CON(8), + PX30_MODE_CON, 4, 1, 0, NULL), + [cpll] = PLL(pll_rk3328, PLL_CPLL, "cpll", mux_pll_p, + 0, PX30_PLL_CON(16), + PX30_MODE_CON, 2, 2, 0, px30_pll_rates), + [npll] = PLL(pll_rk3328, PLL_NPLL, "npll", mux_pll_p, + 0, PX30_PLL_CON(24), + PX30_MODE_CON, 6, 4, 0, px30_pll_rates), +}; + +static struct rockchip_pll_clock px30_pmu_pll_clks[] __initdata = { + [gpll] = PLL(pll_rk3328, PLL_GPLL, "gpll", mux_pll_p, 0, PX30_PMU_PLL_CON(0), + PX30_PMU_MODE, 0, 3, 0, px30_pll_rates), +}; + +#define MFLAGS CLK_MUX_HIWORD_MASK +#define DFLAGS CLK_DIVIDER_HIWORD_MASK +#define GFLAGS (CLK_GATE_HIWORD_MASK | CLK_GATE_SET_TO_DISABLE) + +static struct rockchip_clk_branch px30_pdm_fracmux __initdata = + MUX(0, "clk_pdm_mux", mux_pdm_p, CLK_SET_RATE_PARENT, + PX30_CLKSEL_CON(26), 15, 1, MFLAGS); + +static struct rockchip_clk_branch px30_i2s0_tx_fracmux __initdata = + MUX(0, "clk_i2s0_tx_mux", mux_i2s0_tx_p, CLK_SET_RATE_PARENT, + PX30_CLKSEL_CON(28), 10, 2, MFLAGS); + +static struct rockchip_clk_branch px30_i2s0_rx_fracmux __initdata = + MUX(0, "clk_i2s0_rx_mux", mux_i2s0_rx_p, CLK_SET_RATE_PARENT, + PX30_CLKSEL_CON(58), 10, 2, MFLAGS); + +static struct rockchip_clk_branch px30_i2s1_fracmux __initdata = + MUX(0, "clk_i2s1_mux", mux_i2s1_p, CLK_SET_RATE_PARENT, + PX30_CLKSEL_CON(30), 10, 2, MFLAGS); + +static struct rockchip_clk_branch px30_i2s2_fracmux __initdata = + MUX(0, "clk_i2s2_mux", mux_i2s2_p, CLK_SET_RATE_PARENT, + PX30_CLKSEL_CON(32), 10, 2, MFLAGS); + +static struct rockchip_clk_branch px30_uart1_fracmux __initdata = + MUX(0, "clk_uart1_mux", mux_uart1_p, CLK_SET_RATE_PARENT, + PX30_CLKSEL_CON(35), 14, 2, MFLAGS); + +static struct rockchip_clk_branch px30_uart2_fracmux __initdata = + MUX(0, "clk_uart2_mux", mux_uart2_p, CLK_SET_RATE_PARENT, + PX30_CLKSEL_CON(38), 14, 2, MFLAGS); + +static struct rockchip_clk_branch px30_uart3_fracmux __initdata = + MUX(0, "clk_uart3_mux", mux_uart3_p, CLK_SET_RATE_PARENT, + PX30_CLKSEL_CON(41), 14, 2, MFLAGS); + +static struct rockchip_clk_branch px30_uart4_fracmux __initdata = + MUX(0, "clk_uart4_mux", mux_uart4_p, CLK_SET_RATE_PARENT, + PX30_CLKSEL_CON(44), 14, 2, MFLAGS); + +static struct rockchip_clk_branch px30_uart5_fracmux __initdata = + MUX(0, "clk_uart5_mux", mux_uart5_p, CLK_SET_RATE_PARENT, + PX30_CLKSEL_CON(47), 14, 2, MFLAGS); + +static struct rockchip_clk_branch px30_dclk_vopb_fracmux __initdata = + MUX(0, "dclk_vopb_mux", mux_dclk_vopb_p, CLK_SET_RATE_PARENT, + PX30_CLKSEL_CON(5), 14, 2, MFLAGS); + +static struct rockchip_clk_branch px30_dclk_vopl_fracmux __initdata = + MUX(0, "dclk_vopl_mux", mux_dclk_vopl_p, CLK_SET_RATE_PARENT, + PX30_CLKSEL_CON(8), 14, 2, MFLAGS); + +static struct rockchip_clk_branch px30_rtc32k_pmu_fracmux __initdata = + MUX(SCLK_RTC32K_PMU, "clk_rtc32k_pmu", mux_rtc32k_pmu_p, CLK_SET_RATE_PARENT, + PX30_PMU_CLKSEL_CON(0), 14, 2, MFLAGS); + +static struct rockchip_clk_branch px30_uart0_pmu_fracmux __initdata = + MUX(0, "clk_uart0_pmu_mux", mux_uart0_pmu_p, CLK_SET_RATE_PARENT, + PX30_PMU_CLKSEL_CON(4), 14, 2, MFLAGS); + +static struct rockchip_clk_branch px30_clk_branches[] __initdata = { + /* + * Clock-Architecture Diagram 1 + */ + + MUX(USB480M, "usb480m", mux_usb480m_p, CLK_SET_RATE_PARENT, + PX30_MODE_CON, 8, 2, MFLAGS), + FACTOR(0, "xin12m", "xin24m", 0, 1, 2), + + /* + * Clock-Architecture Diagram 3 + */ + + /* PD_CORE */ + GATE(0, "apll_core", "apll", CLK_IGNORE_UNUSED, + PX30_CLKGATE_CON(0), 0, GFLAGS), + GATE(0, "gpll_core", "gpll", CLK_IGNORE_UNUSED, + PX30_CLKGATE_CON(0), 0, GFLAGS), + COMPOSITE_NOMUX(0, "pclk_dbg", "armclk", CLK_IGNORE_UNUSED, + PX30_CLKSEL_CON(0), 8, 4, DFLAGS | CLK_DIVIDER_READ_ONLY, + PX30_CLKGATE_CON(0), 2, GFLAGS), + COMPOSITE_NOMUX(0, "aclk_core", "armclk", CLK_IGNORE_UNUSED, + PX30_CLKSEL_CON(0), 12, 3, DFLAGS | CLK_DIVIDER_READ_ONLY, + PX30_CLKGATE_CON(0), 1, GFLAGS), + GATE(0, "aclk_core_niu", "aclk_core", CLK_IGNORE_UNUSED, + PX30_CLKGATE_CON(0), 4, GFLAGS), + GATE(0, "aclk_core_prf", "aclk_core", CLK_IGNORE_UNUSED, + PX30_CLKGATE_CON(17), 5, GFLAGS), + GATE(0, "pclk_dbg_niu", "pclk_dbg", CLK_IGNORE_UNUSED, + PX30_CLKGATE_CON(0), 5, GFLAGS), + GATE(0, "pclk_core_dbg", "pclk_dbg", CLK_IGNORE_UNUSED, + PX30_CLKGATE_CON(0), 6, GFLAGS), + GATE(0, "pclk_core_grf", "pclk_dbg", CLK_IGNORE_UNUSED, + PX30_CLKGATE_CON(17), 6, GFLAGS), + + GATE(0, "clk_jtag", "jtag_clkin", CLK_IGNORE_UNUSED, + PX30_CLKGATE_CON(0), 3, GFLAGS), + GATE(SCLK_PVTM, "clk_pvtm", "xin24m", 0, + PX30_CLKGATE_CON(17), 4, GFLAGS), + + /* PD_GPU */ + COMPOSITE_NODIV(0, "clk_gpu_src", mux_4plls_p, 0, + PX30_CLKSEL_CON(1), 6, 2, MFLAGS, + PX30_CLKGATE_CON(0), 8, GFLAGS), + COMPOSITE_NOMUX(0, "clk_gpu_div", "clk_gpu_src", 0, + PX30_CLKSEL_CON(1), 0, 4, DFLAGS, + PX30_CLKGATE_CON(0), 12, GFLAGS), + COMPOSITE_NOMUX_HALFDIV(0, "clk_gpu_np5", "clk_gpu_src", 0, + PX30_CLKSEL_CON(1), 8, 4, DFLAGS, + PX30_CLKGATE_CON(0), 9, GFLAGS), + COMPOSITE_NODIV(SCLK_GPU, "clk_gpu", mux_gpu_p, CLK_SET_RATE_PARENT, + PX30_CLKSEL_CON(1), 15, 1, MFLAGS, + PX30_CLKGATE_CON(0), 10, GFLAGS), + COMPOSITE_NOMUX(0, "aclk_gpu", "clk_gpu", CLK_IGNORE_UNUSED, + PX30_CLKSEL_CON(1), 13, 2, DFLAGS, + PX30_CLKGATE_CON(17), 10, GFLAGS), + GATE(0, "aclk_gpu_niu", "aclk_gpu", CLK_IGNORE_UNUSED, + PX30_CLKGATE_CON(0), 11, GFLAGS), + GATE(0, "aclk_gpu_prf", "aclk_gpu", CLK_IGNORE_UNUSED, + PX30_CLKGATE_CON(17), 8, GFLAGS), + GATE(0, "pclk_gpu_grf", "aclk_gpu", CLK_IGNORE_UNUSED, + PX30_CLKGATE_CON(17), 9, GFLAGS), + + /* + * Clock-Architecture Diagram 4 + */ + + /* PD_DDR */ + GATE(0, "dpll_ddr", "dpll", CLK_IGNORE_UNUSED, + PX30_CLKGATE_CON(0), 7, GFLAGS), + GATE(0, "gpll_ddr", "gpll", CLK_IGNORE_UNUSED, + PX30_CLKGATE_CON(0), 13, GFLAGS), + COMPOSITE_NOGATE(SCLK_DDRCLK, "sclk_ddrc", mux_ddrphy_p, CLK_IGNORE_UNUSED, + PX30_CLKSEL_CON(2), 7, 1, MFLAGS, 0, 3, DFLAGS | CLK_DIVIDER_POWER_OF_TWO), + COMPOSITE_NOGATE(0, "clk_ddrphy4x", mux_ddrphy_p, CLK_IGNORE_UNUSED, + PX30_CLKSEL_CON(2), 7, 1, MFLAGS, 0, 3, DFLAGS), + FACTOR_GATE(0, "clk_ddrphy1x", "clk_ddrphy4x", CLK_IGNORE_UNUSED, 1, 4, + PX30_CLKGATE_CON(0), 14, GFLAGS), + FACTOR_GATE(0, "clk_stdby_2wrap", "clk_ddrphy4x", CLK_IGNORE_UNUSED, 1, 4, + PX30_CLKGATE_CON(1), 0, GFLAGS), + COMPOSITE_NODIV(0, "clk_ddrstdby", mux_ddrstdby_p, CLK_IGNORE_UNUSED, + PX30_CLKSEL_CON(2), 4, 1, MFLAGS, + PX30_CLKGATE_CON(1), 13, GFLAGS), + GATE(0, "aclk_split", "clk_ddrphy1x", CLK_IGNORE_UNUSED, + PX30_CLKGATE_CON(1), 15, GFLAGS), + GATE(0, "clk_msch", "clk_ddrphy1x", CLK_IGNORE_UNUSED, + PX30_CLKGATE_CON(1), 8, GFLAGS), + GATE(0, "aclk_ddrc", "clk_ddrphy1x", CLK_IGNORE_UNUSED, + PX30_CLKGATE_CON(1), 5, GFLAGS), + GATE(0, "clk_core_ddrc", "clk_ddrphy1x", CLK_IGNORE_UNUSED, + PX30_CLKGATE_CON(1), 6, GFLAGS), + GATE(0, "aclk_cmd_buff", "clk_ddrphy1x", CLK_IGNORE_UNUSED, + PX30_CLKGATE_CON(1), 6, GFLAGS), + GATE(0, "clk_ddrmon", "clk_ddrphy1x", CLK_IGNORE_UNUSED, + PX30_CLKGATE_CON(1), 11, GFLAGS), + + GATE(0, "clk_ddrmon_timer", "xin24m", CLK_IGNORE_UNUSED, + PX30_CLKGATE_CON(0), 15, GFLAGS), + + COMPOSITE_NOMUX(PCLK_DDR, "pclk_ddr", "gpll", CLK_IGNORE_UNUSED, + PX30_CLKSEL_CON(2), 8, 5, DFLAGS, + PX30_CLKGATE_CON(1), 1, GFLAGS), + GATE(0, "pclk_ddrmon", "pclk_ddr", CLK_IGNORE_UNUSED, + PX30_CLKGATE_CON(1), 10, GFLAGS), + GATE(0, "pclk_ddrc", "pclk_ddr", CLK_IGNORE_UNUSED, + PX30_CLKGATE_CON(1), 7, GFLAGS), + GATE(0, "pclk_msch", "pclk_ddr", CLK_IGNORE_UNUSED, + PX30_CLKGATE_CON(1), 9, GFLAGS), + GATE(0, "pclk_stdby", "pclk_ddr", CLK_IGNORE_UNUSED, + PX30_CLKGATE_CON(1), 12, GFLAGS), + GATE(0, "pclk_ddr_grf", "pclk_ddr", CLK_IGNORE_UNUSED, + PX30_CLKGATE_CON(1), 14, GFLAGS), + GATE(0, "pclk_cmdbuff", "pclk_ddr", CLK_IGNORE_UNUSED, + PX30_CLKGATE_CON(1), 3, GFLAGS), + + /* + * Clock-Architecture Diagram 5 + */ + + /* PD_VI */ + COMPOSITE(ACLK_VI_PRE, "aclk_vi_pre", mux_gpll_cpll_npll_p, 0, + PX30_CLKSEL_CON(11), 6, 2, MFLAGS, 0, 5, DFLAGS, + PX30_CLKGATE_CON(4), 8, GFLAGS), + COMPOSITE_NOMUX(HCLK_VI_PRE, "hclk_vi_pre", "aclk_vi_pre", 0, + PX30_CLKSEL_CON(11), 8, 4, DFLAGS, + PX30_CLKGATE_CON(4), 12, GFLAGS), + COMPOSITE(SCLK_ISP, "clk_isp", mux_gpll_cpll_npll_p, 0, + PX30_CLKSEL_CON(12), 6, 2, MFLAGS, 0, 5, DFLAGS, + PX30_CLKGATE_CON(4), 9, GFLAGS), + COMPOSITE(SCLK_CIF_OUT, "clk_cif_out", mux_cif_out_p, 0, + PX30_CLKSEL_CON(13), 6, 2, MFLAGS, 0, 6, DFLAGS, + PX30_CLKGATE_CON(4), 11, GFLAGS), + GATE(PCLK_ISP, "pclkin_isp", "ext_pclkin", 0, + PX30_CLKGATE_CON(4), 13, GFLAGS), + GATE(PCLK_CIF, "pclkin_cif", "ext_pclkin", 0, + PX30_CLKGATE_CON(4), 14, GFLAGS), + + /* + * Clock-Architecture Diagram 6 + */ + + /* PD_VO */ + COMPOSITE(ACLK_VO_PRE, "aclk_vo_pre", mux_gpll_cpll_npll_p, 0, + PX30_CLKSEL_CON(3), 6, 2, MFLAGS, 0, 5, DFLAGS, + PX30_CLKGATE_CON(2), 0, GFLAGS), + COMPOSITE_NOMUX(HCLK_VO_PRE, "hclk_vo_pre", "aclk_vo_pre", 0, + PX30_CLKSEL_CON(3), 8, 4, DFLAGS, + PX30_CLKGATE_CON(2), 12, GFLAGS), + COMPOSITE_NOMUX(PCLK_VO_PRE, "pclk_vo_pre", "aclk_vo_pre", 0, + PX30_CLKSEL_CON(3), 12, 4, DFLAGS, + PX30_CLKGATE_CON(2), 13, GFLAGS), + COMPOSITE(SCLK_RGA_CORE, "clk_rga_core", mux_gpll_cpll_npll_p, 0, + PX30_CLKSEL_CON(4), 6, 2, MFLAGS, 0, 5, DFLAGS, + PX30_CLKGATE_CON(2), 1, GFLAGS), + + COMPOSITE(SCLK_VOPB_PWM, "clk_vopb_pwm", mux_gpll_xin24m_p, 0, + PX30_CLKSEL_CON(7), 7, 1, MFLAGS, 0, 7, DFLAGS, + PX30_CLKGATE_CON(2), 5, GFLAGS), + COMPOSITE(0, "dclk_vopb_src", mux_cpll_npll_p, CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT, + PX30_CLKSEL_CON(5), 11, 1, MFLAGS, 0, 8, DFLAGS, + PX30_CLKGATE_CON(2), 2, GFLAGS), + COMPOSITE_FRACMUX(0, "dclk_vopb_frac", "dclk_vopb_src", CLK_SET_RATE_PARENT, + PX30_CLKSEL_CON(6), 0, + PX30_CLKGATE_CON(2), 3, GFLAGS, + &px30_dclk_vopb_fracmux), + GATE(DCLK_VOPB, "dclk_vopb", "dclk_vopb_mux", CLK_SET_RATE_PARENT, + PX30_CLKGATE_CON(2), 4, GFLAGS), + COMPOSITE(0, "dclk_vopl_src", mux_npll_cpll_p, 0, + PX30_CLKSEL_CON(8), 11, 1, MFLAGS, 0, 8, DFLAGS, + PX30_CLKGATE_CON(2), 6, GFLAGS), + COMPOSITE_FRACMUX(0, "dclk_vopl_frac", "dclk_vopl_src", CLK_SET_RATE_PARENT, + PX30_CLKSEL_CON(9), 0, + PX30_CLKGATE_CON(2), 7, GFLAGS, + &px30_dclk_vopl_fracmux), + GATE(DCLK_VOPL, "dclk_vopl", "dclk_vopl_mux", CLK_SET_RATE_PARENT, + PX30_CLKGATE_CON(2), 8, GFLAGS), + + /* PD_VPU */ + COMPOSITE(0, "aclk_vpu_pre", mux_gpll_cpll_npll_p, 0, + PX30_CLKSEL_CON(10), 6, 2, MFLAGS, 0, 5, DFLAGS, + PX30_CLKGATE_CON(4), 0, GFLAGS), + COMPOSITE_NOMUX(0, "hclk_vpu_pre", "aclk_vpu_pre", 0, + PX30_CLKSEL_CON(10), 8, 4, DFLAGS, + PX30_CLKGATE_CON(4), 2, GFLAGS), + COMPOSITE(SCLK_CORE_VPU, "sclk_core_vpu", mux_gpll_cpll_npll_p, 0, + PX30_CLKSEL_CON(13), 14, 2, MFLAGS, 8, 5, DFLAGS, + PX30_CLKGATE_CON(4), 1, GFLAGS), + + /* + * Clock-Architecture Diagram 7 + */ + + COMPOSITE_NODIV(ACLK_PERI_SRC, "aclk_peri_src", mux_gpll_cpll_p, 0, + PX30_CLKSEL_CON(14), 15, 1, MFLAGS, + PX30_CLKGATE_CON(5), 7, GFLAGS), + COMPOSITE_NOMUX(ACLK_PERI_PRE, "aclk_peri_pre", "aclk_peri_src", CLK_IGNORE_UNUSED, + PX30_CLKSEL_CON(14), 0, 5, DFLAGS, + PX30_CLKGATE_CON(5), 8, GFLAGS), + DIV(HCLK_PERI_PRE, "hclk_peri_pre", "aclk_peri_src", CLK_IGNORE_UNUSED, + PX30_CLKSEL_CON(14), 8, 5, DFLAGS), + + /* PD_MMC_NAND */ + GATE(HCLK_MMC_NAND, "hclk_mmc_nand", "hclk_peri_pre", 0, + PX30_CLKGATE_CON(6), 0, GFLAGS), + COMPOSITE(SCLK_NANDC, "clk_nandc", mux_gpll_cpll_npll_p, 0, + PX30_CLKSEL_CON(15), 6, 2, MFLAGS, 0, 5, DFLAGS, + PX30_CLKGATE_CON(5), 13, GFLAGS), + + COMPOSITE(SCLK_SDIO, "clk_sdio", mux_gpll_cpll_npll_xin24m_p, 0, + PX30_CLKSEL_CON(18), 14, 2, MFLAGS, 0, 8, DFLAGS, + PX30_CLKGATE_CON(6), 3, GFLAGS), + + COMPOSITE(SCLK_EMMC, "clk_emmc", mux_gpll_cpll_npll_xin24m_p, 0, + PX30_CLKSEL_CON(20), 14, 2, MFLAGS, 0, 8, DFLAGS, + PX30_CLKGATE_CON(6), 6, GFLAGS), + + COMPOSITE(SCLK_SFC, "clk_sfc", mux_gpll_cpll_p, 0, + PX30_CLKSEL_CON(22), 7, 1, MFLAGS, 0, 7, DFLAGS, + PX30_CLKGATE_CON(6), 7, GFLAGS), + + MMC(SCLK_SDMMC_DRV, "sdmmc_drv", "clk_sdmmc", + PX30_SDMMC_CON0, 1), + MMC(SCLK_SDMMC_SAMPLE, "sdmmc_sample", "clk_sdmmc", + PX30_SDMMC_CON1, 1), + + MMC(SCLK_SDIO_DRV, "sdio_drv", "clk_sdio", + PX30_SDIO_CON0, 1), + MMC(SCLK_SDIO_SAMPLE, "sdio_sample", "clk_sdio", + PX30_SDIO_CON1, 1), + + MMC(SCLK_EMMC_DRV, "emmc_drv", "clk_emmc", + PX30_EMMC_CON0, 1), + MMC(SCLK_EMMC_SAMPLE, "emmc_sample", "clk_emmc", + PX30_EMMC_CON1, 1), + + /* PD_SDCARD */ + GATE(0, "hclk_sdmmc_pre", "hclk_peri_pre", 0, + PX30_CLKGATE_CON(6), 12, GFLAGS), + COMPOSITE(SCLK_SDMMC, "clk_sdmmc", mux_gpll_cpll_npll_xin24m_p, 0, + PX30_CLKSEL_CON(16), 14, 2, MFLAGS, 0, 8, DFLAGS, + PX30_CLKGATE_CON(6), 15, GFLAGS), + + /* PD_USB */ + GATE(HCLK_USB, "hclk_usb", "hclk_peri_pre", 0, + PX30_CLKGATE_CON(7), 2, GFLAGS), + GATE(SCLK_OTG_ADP, "clk_otg_adp", "clk_rtc32k_pmu", 0, + PX30_CLKGATE_CON(7), 3, GFLAGS), + + /* PD_GMAC */ + COMPOSITE(SCLK_GMAC_SRC, "clk_gmac_src", mux_gpll_cpll_npll_p, 0, + PX30_CLKSEL_CON(22), 14, 2, MFLAGS, 8, 5, DFLAGS, + PX30_CLKGATE_CON(7), 11, GFLAGS), + MUX(SCLK_GMAC, "clk_gmac", mux_gmac_p, CLK_SET_RATE_PARENT, + PX30_CLKSEL_CON(23), 6, 1, MFLAGS), + GATE(SCLK_MAC_REF, "clk_mac_ref", "clk_gmac", 0, + PX30_CLKGATE_CON(7), 15, GFLAGS), + GATE(SCLK_GMAC_RX_TX, "clk_gmac_rx_tx", "clk_gmac", 0, + PX30_CLKGATE_CON(7), 13, GFLAGS), + FACTOR(0, "clk_gmac_rx_tx_div2", "clk_gmac_rx_tx", 0, 1, 2), + FACTOR(0, "clk_gmac_rx_tx_div20", "clk_gmac_rx_tx", 0, 1, 20), + MUX(SCLK_GMAC_RMII, "clk_gmac_rmii_sel", mux_gmac_rmii_sel_p, CLK_SET_RATE_PARENT, + PX30_CLKSEL_CON(23), 7, 1, MFLAGS), + + GATE(0, "aclk_gmac_pre", "aclk_peri_pre", 0, + PX30_CLKGATE_CON(7), 10, GFLAGS), + COMPOSITE_NOMUX(0, "pclk_gmac_pre", "aclk_gmac_pre", 0, + PX30_CLKSEL_CON(23), 0, 4, DFLAGS, + PX30_CLKGATE_CON(7), 12, GFLAGS), + + COMPOSITE(SCLK_MAC_OUT, "clk_mac_out", mux_gpll_cpll_npll_p, 0, + PX30_CLKSEL_CON(12), 14, 2, MFLAGS, 8, 5, DFLAGS, + PX30_CLKGATE_CON(8), 5, GFLAGS), + + /* + * Clock-Architecture Diagram 8 + */ + + /* PD_BUS */ + COMPOSITE_NODIV(ACLK_BUS_SRC, "aclk_bus_src", mux_gpll_cpll_p, CLK_IGNORE_UNUSED, + PX30_CLKSEL_CON(23), 15, 1, MFLAGS, + PX30_CLKGATE_CON(8), 6, GFLAGS), + COMPOSITE_NOMUX(HCLK_BUS_PRE, "hclk_bus_pre", "aclk_bus_src", CLK_IGNORE_UNUSED, + PX30_CLKSEL_CON(24), 0, 5, DFLAGS, + PX30_CLKGATE_CON(8), 8, GFLAGS), + COMPOSITE_NOMUX(ACLK_BUS_PRE, "aclk_bus_pre", "aclk_bus_src", CLK_IGNORE_UNUSED, + PX30_CLKSEL_CON(23), 8, 5, DFLAGS, + PX30_CLKGATE_CON(8), 7, GFLAGS), + COMPOSITE_NOMUX(PCLK_BUS_PRE, "pclk_bus_pre", "aclk_bus_pre", CLK_IGNORE_UNUSED, + PX30_CLKSEL_CON(24), 8, 2, DFLAGS, + PX30_CLKGATE_CON(8), 9, GFLAGS), + GATE(0, "pclk_top_pre", "pclk_bus_pre", CLK_IGNORE_UNUSED, + PX30_CLKGATE_CON(8), 10, GFLAGS), + + COMPOSITE(0, "clk_pdm_src", mux_gpll_xin24m_npll_p, 0, + PX30_CLKSEL_CON(26), 8, 2, MFLAGS, 0, 7, DFLAGS, + PX30_CLKGATE_CON(9), 9, GFLAGS), + COMPOSITE_FRACMUX(0, "clk_pdm_frac", "clk_pdm_src", CLK_SET_RATE_PARENT, + PX30_CLKSEL_CON(27), 0, + PX30_CLKGATE_CON(9), 10, GFLAGS, + &px30_pdm_fracmux), + GATE(SCLK_PDM, "clk_pdm", "clk_pdm_mux", CLK_SET_RATE_PARENT, + PX30_CLKGATE_CON(9), 11, GFLAGS), + + COMPOSITE(0, "clk_i2s0_tx_src", mux_gpll_npll_p, 0, + PX30_CLKSEL_CON(28), 8, 1, MFLAGS, 0, 7, DFLAGS, + PX30_CLKGATE_CON(9), 12, GFLAGS), + COMPOSITE_FRACMUX(0, "clk_i2s0_tx_frac", "clk_i2s0_tx_src", CLK_SET_RATE_PARENT, + PX30_CLKSEL_CON(29), 0, + PX30_CLKGATE_CON(9), 13, GFLAGS, + &px30_i2s0_tx_fracmux), + COMPOSITE_NODIV(SCLK_I2S0_TX, "clk_i2s0_tx", mux_i2s0_tx_rx_p, CLK_SET_RATE_PARENT, + PX30_CLKSEL_CON(28), 12, 1, MFLAGS, + PX30_CLKGATE_CON(9), 14, GFLAGS), + COMPOSITE_NODIV(0, "clk_i2s0_tx_out_pre", mux_i2s0_tx_out_p, 0, + PX30_CLKSEL_CON(28), 14, 2, MFLAGS, + PX30_CLKGATE_CON(9), 15, GFLAGS), + GATE(SCLK_I2S0_TX_OUT, "clk_i2s0_tx_out", "clk_i2s0_tx_out_pre", CLK_SET_RATE_PARENT, + PX30_CLKGATE_CON(10), 8, CLK_GATE_HIWORD_MASK), + + COMPOSITE(0, "clk_i2s0_rx_src", mux_gpll_npll_p, 0, + PX30_CLKSEL_CON(58), 8, 1, MFLAGS, 0, 7, DFLAGS, + PX30_CLKGATE_CON(17), 0, GFLAGS), + COMPOSITE_FRACMUX(0, "clk_i2s0_rx_frac", "clk_i2s0_rx_src", CLK_SET_RATE_PARENT, + PX30_CLKSEL_CON(59), 0, + PX30_CLKGATE_CON(17), 1, GFLAGS, + &px30_i2s0_rx_fracmux), + COMPOSITE_NODIV(SCLK_I2S0_RX, "clk_i2s0_rx", mux_i2s0_rx_tx_p, CLK_SET_RATE_PARENT, + PX30_CLKSEL_CON(58), 12, 1, MFLAGS, + PX30_CLKGATE_CON(17), 2, GFLAGS), + COMPOSITE_NODIV(0, "clk_i2s0_rx_out_pre", mux_i2s0_rx_out_p, 0, + PX30_CLKSEL_CON(58), 14, 2, MFLAGS, + PX30_CLKGATE_CON(17), 3, GFLAGS), + GATE(SCLK_I2S0_RX_OUT, "clk_i2s0_rx_out", "clk_i2s0_rx_out_pre", CLK_SET_RATE_PARENT, + PX30_CLKGATE_CON(10), 11, CLK_GATE_HIWORD_MASK), + + COMPOSITE(0, "clk_i2s1_src", mux_gpll_npll_p, 0, + PX30_CLKSEL_CON(30), 8, 1, MFLAGS, 0, 7, DFLAGS, + PX30_CLKGATE_CON(10), 0, GFLAGS), + COMPOSITE_FRACMUX(0, "clk_i2s1_frac", "clk_i2s1_src", CLK_SET_RATE_PARENT, + PX30_CLKSEL_CON(31), 0, + PX30_CLKGATE_CON(10), 1, GFLAGS, + &px30_i2s1_fracmux), + GATE(SCLK_I2S1, "clk_i2s1", "clk_i2s1_mux", CLK_SET_RATE_PARENT, + PX30_CLKGATE_CON(10), 2, GFLAGS), + COMPOSITE_NODIV(0, "clk_i2s1_out_pre", mux_i2s1_out_p, 0, + PX30_CLKSEL_CON(30), 15, 1, MFLAGS, + PX30_CLKGATE_CON(10), 3, GFLAGS), + GATE(SCLK_I2S1_OUT, "clk_i2s1_out", "clk_i2s1_out_pre", CLK_SET_RATE_PARENT, + PX30_CLKGATE_CON(10), 9, CLK_GATE_HIWORD_MASK), + + COMPOSITE(0, "clk_i2s2_src", mux_gpll_npll_p, 0, + PX30_CLKSEL_CON(32), 8, 1, MFLAGS, 0, 7, DFLAGS, + PX30_CLKGATE_CON(10), 4, GFLAGS), + COMPOSITE_FRACMUX(0, "clk_i2s2_frac", "clk_i2s2_src", CLK_SET_RATE_PARENT, + PX30_CLKSEL_CON(33), 0, + PX30_CLKGATE_CON(10), 5, GFLAGS, + &px30_i2s2_fracmux), + GATE(SCLK_I2S2, "clk_i2s2", "clk_i2s2_mux", CLK_SET_RATE_PARENT, + PX30_CLKGATE_CON(10), 6, GFLAGS), + COMPOSITE_NODIV(0, "clk_i2s2_out_pre", mux_i2s2_out_p, 0, + PX30_CLKSEL_CON(32), 15, 1, MFLAGS, + PX30_CLKGATE_CON(10), 7, GFLAGS), + GATE(SCLK_I2S2_OUT, "clk_i2s2_out", "clk_i2s2_out_pre", CLK_SET_RATE_PARENT, + PX30_CLKGATE_CON(10), 10, CLK_GATE_HIWORD_MASK), + + COMPOSITE(SCLK_UART1_SRC, "clk_uart1_src", mux_uart_src_p, CLK_SET_RATE_NO_REPARENT, + PX30_CLKSEL_CON(34), 14, 2, MFLAGS, 0, 5, DFLAGS, + PX30_CLKGATE_CON(10), 12, GFLAGS), + COMPOSITE_NOMUX_HALFDIV(0, "clk_uart1_np5", "clk_uart1_src", 0, + PX30_CLKSEL_CON(35), 0, 5, DFLAGS, + PX30_CLKGATE_CON(10), 13, GFLAGS), + COMPOSITE_FRACMUX(0, "clk_uart1_frac", "clk_uart1_src", CLK_SET_RATE_PARENT, + PX30_CLKSEL_CON(36), 0, + PX30_CLKGATE_CON(10), 14, GFLAGS, + &px30_uart1_fracmux), + GATE(SCLK_UART1, "clk_uart1", "clk_uart1_mux", CLK_SET_RATE_PARENT, + PX30_CLKGATE_CON(10), 15, GFLAGS), + + COMPOSITE(SCLK_UART2_SRC, "clk_uart2_src", mux_uart_src_p, 0, + PX30_CLKSEL_CON(37), 14, 2, MFLAGS, 0, 5, DFLAGS, + PX30_CLKGATE_CON(11), 0, GFLAGS), + COMPOSITE_NOMUX_HALFDIV(0, "clk_uart2_np5", "clk_uart2_src", 0, + PX30_CLKSEL_CON(38), 0, 5, DFLAGS, + PX30_CLKGATE_CON(11), 1, GFLAGS), + COMPOSITE_FRACMUX(0, "clk_uart2_frac", "clk_uart2_src", CLK_SET_RATE_PARENT, + PX30_CLKSEL_CON(39), 0, + PX30_CLKGATE_CON(11), 2, GFLAGS, + &px30_uart2_fracmux), + GATE(SCLK_UART2, "clk_uart2", "clk_uart2_mux", CLK_SET_RATE_PARENT, + PX30_CLKGATE_CON(11), 3, GFLAGS), + + COMPOSITE(0, "clk_uart3_src", mux_uart_src_p, 0, + PX30_CLKSEL_CON(40), 14, 2, MFLAGS, 0, 5, DFLAGS, + PX30_CLKGATE_CON(11), 4, GFLAGS), + COMPOSITE_NOMUX_HALFDIV(0, "clk_uart3_np5", "clk_uart3_src", 0, + PX30_CLKSEL_CON(41), 0, 5, DFLAGS, + PX30_CLKGATE_CON(11), 5, GFLAGS), + COMPOSITE_FRACMUX(0, "clk_uart3_frac", "clk_uart3_src", CLK_SET_RATE_PARENT, + PX30_CLKSEL_CON(42), 0, + PX30_CLKGATE_CON(11), 6, GFLAGS, + &px30_uart3_fracmux), + GATE(SCLK_UART3, "clk_uart3", "clk_uart3_mux", CLK_SET_RATE_PARENT, + PX30_CLKGATE_CON(11), 7, GFLAGS), + + COMPOSITE(0, "clk_uart4_src", mux_uart_src_p, 0, + PX30_CLKSEL_CON(43), 14, 2, MFLAGS, 0, 5, DFLAGS, + PX30_CLKGATE_CON(11), 8, GFLAGS), + COMPOSITE_NOMUX_HALFDIV(0, "clk_uart4_np5", "clk_uart4_src", 0, + PX30_CLKSEL_CON(44), 0, 5, DFLAGS, + PX30_CLKGATE_CON(11), 9, GFLAGS), + COMPOSITE_FRACMUX(0, "clk_uart4_frac", "clk_uart4_src", CLK_SET_RATE_PARENT, + PX30_CLKSEL_CON(45), 0, + PX30_CLKGATE_CON(11), 10, GFLAGS, + &px30_uart4_fracmux), + GATE(SCLK_UART4, "clk_uart4", "clk_uart4_mux", CLK_SET_RATE_PARENT, + PX30_CLKGATE_CON(11), 11, GFLAGS), + + COMPOSITE(0, "clk_uart5_src", mux_uart_src_p, 0, + PX30_CLKSEL_CON(46), 14, 2, MFLAGS, 0, 5, DFLAGS, + PX30_CLKGATE_CON(11), 12, GFLAGS), + COMPOSITE_NOMUX_HALFDIV(0, "clk_uart5_np5", "clk_uart5_src", 0, + PX30_CLKSEL_CON(47), 0, 5, DFLAGS, + PX30_CLKGATE_CON(11), 13, GFLAGS), + COMPOSITE_FRACMUX(0, "clk_uart5_frac", "clk_uart5_src", CLK_SET_RATE_PARENT, + PX30_CLKSEL_CON(48), 0, + PX30_CLKGATE_CON(11), 14, GFLAGS, + &px30_uart5_fracmux), + GATE(SCLK_UART5, "clk_uart5", "clk_uart5_mux", CLK_SET_RATE_PARENT, + PX30_CLKGATE_CON(11), 15, GFLAGS), + + COMPOSITE(SCLK_I2C0, "clk_i2c0", mux_gpll_xin24m_p, 0, + PX30_CLKSEL_CON(49), 7, 1, MFLAGS, 0, 7, DFLAGS, + PX30_CLKGATE_CON(12), 0, GFLAGS), + COMPOSITE(SCLK_I2C1, "clk_i2c1", mux_gpll_xin24m_p, 0, + PX30_CLKSEL_CON(49), 15, 1, MFLAGS, 8, 7, DFLAGS, + PX30_CLKGATE_CON(12), 1, GFLAGS), + COMPOSITE(SCLK_I2C2, "clk_i2c2", mux_gpll_xin24m_p, 0, + PX30_CLKSEL_CON(50), 7, 1, MFLAGS, 0, 7, DFLAGS, + PX30_CLKGATE_CON(12), 2, GFLAGS), + COMPOSITE(SCLK_I2C3, "clk_i2c3", mux_gpll_xin24m_p, 0, + PX30_CLKSEL_CON(50), 15, 1, MFLAGS, 8, 7, DFLAGS, + PX30_CLKGATE_CON(12), 3, GFLAGS), + COMPOSITE(SCLK_PWM0, "clk_pwm0", mux_gpll_xin24m_p, 0, + PX30_CLKSEL_CON(52), 7, 1, MFLAGS, 0, 7, DFLAGS, + PX30_CLKGATE_CON(12), 5, GFLAGS), + COMPOSITE(SCLK_PWM1, "clk_pwm1", mux_gpll_xin24m_p, 0, + PX30_CLKSEL_CON(52), 15, 1, MFLAGS, 8, 7, DFLAGS, + PX30_CLKGATE_CON(12), 6, GFLAGS), + COMPOSITE(SCLK_SPI0, "clk_spi0", mux_gpll_xin24m_p, 0, + PX30_CLKSEL_CON(53), 7, 1, MFLAGS, 0, 7, DFLAGS, + PX30_CLKGATE_CON(12), 7, GFLAGS), + COMPOSITE(SCLK_SPI1, "clk_spi1", mux_gpll_xin24m_p, 0, + PX30_CLKSEL_CON(53), 15, 1, MFLAGS, 8, 7, DFLAGS, + PX30_CLKGATE_CON(12), 8, GFLAGS), + + GATE(SCLK_TIMER0, "sclk_timer0", "xin24m", 0, + PX30_CLKGATE_CON(13), 0, GFLAGS), + GATE(SCLK_TIMER1, "sclk_timer1", "xin24m", 0, + PX30_CLKGATE_CON(13), 1, GFLAGS), + GATE(SCLK_TIMER2, "sclk_timer2", "xin24m", 0, + PX30_CLKGATE_CON(13), 2, GFLAGS), + GATE(SCLK_TIMER3, "sclk_timer3", "xin24m", 0, + PX30_CLKGATE_CON(13), 3, GFLAGS), + GATE(SCLK_TIMER4, "sclk_timer4", "xin24m", 0, + PX30_CLKGATE_CON(13), 4, GFLAGS), + GATE(SCLK_TIMER5, "sclk_timer5", "xin24m", 0, + PX30_CLKGATE_CON(13), 5, GFLAGS), + + COMPOSITE_NOMUX(SCLK_TSADC, "clk_tsadc", "xin24m", 0, + PX30_CLKSEL_CON(54), 0, 11, DFLAGS, + PX30_CLKGATE_CON(12), 9, GFLAGS), + COMPOSITE_NOMUX(SCLK_SARADC, "clk_saradc", "xin24m", 0, + PX30_CLKSEL_CON(55), 0, 11, DFLAGS, + PX30_CLKGATE_CON(12), 10, GFLAGS), + COMPOSITE_NOMUX(SCLK_OTP, "clk_otp", "xin24m", 0, + PX30_CLKSEL_CON(56), 0, 3, DFLAGS, + PX30_CLKGATE_CON(12), 11, GFLAGS), + COMPOSITE_NOMUX(SCLK_OTP_USR, "clk_otp_usr", "clk_otp", 0, + PX30_CLKSEL_CON(56), 4, 2, DFLAGS, + PX30_CLKGATE_CON(13), 6, GFLAGS), + + GATE(0, "clk_cpu_boost", "xin24m", CLK_IGNORE_UNUSED, + PX30_CLKGATE_CON(12), 12, GFLAGS), + + /* PD_CRYPTO */ + GATE(0, "aclk_crypto_pre", "aclk_bus_pre", 0, + PX30_CLKGATE_CON(8), 12, GFLAGS), + GATE(0, "hclk_crypto_pre", "hclk_bus_pre", 0, + PX30_CLKGATE_CON(8), 13, GFLAGS), + COMPOSITE(SCLK_CRYPTO, "clk_crypto", mux_gpll_cpll_npll_p, 0, + PX30_CLKSEL_CON(25), 6, 2, MFLAGS, 0, 5, DFLAGS, + PX30_CLKGATE_CON(8), 14, GFLAGS), + COMPOSITE(SCLK_CRYPTO_APK, "clk_crypto_apk", mux_gpll_cpll_npll_p, 0, + PX30_CLKSEL_CON(25), 14, 2, MFLAGS, 8, 5, DFLAGS, + PX30_CLKGATE_CON(8), 15, GFLAGS), + + /* + * Clock-Architecture Diagram 9 + */ + + /* PD_BUS_TOP */ + GATE(0, "pclk_top_niu", "pclk_top_pre", CLK_IGNORE_UNUSED, PX30_CLKGATE_CON(16), 0, GFLAGS), + GATE(0, "pclk_top_cru", "pclk_top_pre", CLK_IGNORE_UNUSED, PX30_CLKGATE_CON(16), 1, GFLAGS), + GATE(PCLK_OTP_PHY, "pclk_otp_phy", "pclk_top_pre", CLK_IGNORE_UNUSED, PX30_CLKGATE_CON(16), 2, GFLAGS), + GATE(0, "pclk_ddrphy", "pclk_top_pre", CLK_IGNORE_UNUSED, PX30_CLKGATE_CON(16), 3, GFLAGS), + GATE(PCLK_MIPIDSIPHY, "pclk_mipidsiphy", "pclk_top_pre", 0, PX30_CLKGATE_CON(16), 4, GFLAGS), + GATE(PCLK_MIPICSIPHY, "pclk_mipicsiphy", "pclk_top_pre", 0, PX30_CLKGATE_CON(16), 5, GFLAGS), + GATE(PCLK_USB_GRF, "pclk_usb_grf", "pclk_top_pre", CLK_IGNORE_UNUSED, PX30_CLKGATE_CON(16), 6, GFLAGS), + GATE(0, "pclk_cpu_hoost", "pclk_top_pre", CLK_IGNORE_UNUSED, PX30_CLKGATE_CON(16), 7, GFLAGS), + + /* PD_VI */ + GATE(0, "aclk_vi_niu", "aclk_vi_pre", CLK_IGNORE_UNUSED, PX30_CLKGATE_CON(4), 15, GFLAGS), + GATE(ACLK_CIF, "aclk_cif", "aclk_vi_pre", 0, PX30_CLKGATE_CON(5), 1, GFLAGS), + GATE(ACLK_ISP, "aclk_isp", "aclk_vi_pre", 0, PX30_CLKGATE_CON(5), 3, GFLAGS), + GATE(0, "hclk_vi_niu", "hclk_vi_pre", CLK_IGNORE_UNUSED, PX30_CLKGATE_CON(5), 0, GFLAGS), + GATE(HCLK_CIF, "hclk_cif", "hclk_vi_pre", 0, PX30_CLKGATE_CON(5), 2, GFLAGS), + GATE(HCLK_ISP, "hclk_isp", "hclk_vi_pre", 0, PX30_CLKGATE_CON(5), 4, GFLAGS), + + /* PD_VO */ + GATE(0, "aclk_vo_niu", "aclk_vo_pre", CLK_IGNORE_UNUSED, PX30_CLKGATE_CON(3), 0, GFLAGS), + GATE(ACLK_VOPB, "aclk_vopb", "aclk_vo_pre", 0, PX30_CLKGATE_CON(3), 3, GFLAGS), + GATE(ACLK_RGA, "aclk_rga", "aclk_vo_pre", 0, PX30_CLKGATE_CON(3), 7, GFLAGS), + GATE(ACLK_VOPL, "aclk_vopl", "aclk_vo_pre", 0, PX30_CLKGATE_CON(3), 5, GFLAGS), + + GATE(0, "hclk_vo_niu", "hclk_vo_pre", CLK_IGNORE_UNUSED, PX30_CLKGATE_CON(3), 1, GFLAGS), + GATE(HCLK_VOPB, "hclk_vopb", "hclk_vo_pre", 0, PX30_CLKGATE_CON(3), 4, GFLAGS), + GATE(HCLK_RGA, "hclk_rga", "hclk_vo_pre", 0, PX30_CLKGATE_CON(3), 8, GFLAGS), + GATE(HCLK_VOPL, "hclk_vopl", "hclk_vo_pre", 0, PX30_CLKGATE_CON(3), 6, GFLAGS), + + GATE(0, "pclk_vo_niu", "pclk_vo_pre", CLK_IGNORE_UNUSED, PX30_CLKGATE_CON(3), 2, GFLAGS), + GATE(PCLK_MIPI_DSI, "pclk_mipi_dsi", "pclk_vo_pre", 0, PX30_CLKGATE_CON(3), 9, GFLAGS), + + /* PD_BUS */ + GATE(0, "aclk_bus_niu", "aclk_bus_pre", CLK_IGNORE_UNUSED, PX30_CLKGATE_CON(13), 8, GFLAGS), + GATE(0, "aclk_intmem", "aclk_bus_pre", CLK_IGNORE_UNUSED, PX30_CLKGATE_CON(13), 11, GFLAGS), + GATE(ACLK_GIC, "aclk_gic", "aclk_bus_pre", CLK_IGNORE_UNUSED, PX30_CLKGATE_CON(13), 12, GFLAGS), + GATE(ACLK_DCF, "aclk_dcf", "aclk_bus_pre", 0, PX30_CLKGATE_CON(13), 15, GFLAGS), + + GATE(0, "hclk_bus_niu", "hclk_bus_pre", CLK_IGNORE_UNUSED, PX30_CLKGATE_CON(13), 9, GFLAGS), + GATE(0, "hclk_rom", "hclk_bus_pre", CLK_IGNORE_UNUSED, PX30_CLKGATE_CON(13), 14, GFLAGS), + GATE(HCLK_PDM, "hclk_pdm", "hclk_bus_pre", 0, PX30_CLKGATE_CON(14), 1, GFLAGS), + GATE(HCLK_I2S0, "hclk_i2s0", "hclk_bus_pre", 0, PX30_CLKGATE_CON(14), 2, GFLAGS), + GATE(HCLK_I2S1, "hclk_i2s1", "hclk_bus_pre", 0, PX30_CLKGATE_CON(14), 3, GFLAGS), + GATE(HCLK_I2S2, "hclk_i2s2", "hclk_bus_pre", 0, PX30_CLKGATE_CON(14), 4, GFLAGS), + + GATE(0, "pclk_bus_niu", "pclk_bus_pre", CLK_IGNORE_UNUSED, PX30_CLKGATE_CON(13), 10, GFLAGS), + GATE(PCLK_DCF, "pclk_dcf", "pclk_bus_pre", 0, PX30_CLKGATE_CON(14), 0, GFLAGS), + GATE(PCLK_UART1, "pclk_uart1", "pclk_bus_pre", 0, PX30_CLKGATE_CON(14), 5, GFLAGS), + GATE(PCLK_UART2, "pclk_uart2", "pclk_bus_pre", 0, PX30_CLKGATE_CON(14), 6, GFLAGS), + GATE(PCLK_UART3, "pclk_uart3", "pclk_bus_pre", 0, PX30_CLKGATE_CON(14), 7, GFLAGS), + GATE(PCLK_UART4, "pclk_uart4", "pclk_bus_pre", 0, PX30_CLKGATE_CON(14), 8, GFLAGS), + GATE(PCLK_UART5, "pclk_uart5", "pclk_bus_pre", 0, PX30_CLKGATE_CON(14), 9, GFLAGS), + GATE(PCLK_I2C0, "pclk_i2c0", "pclk_bus_pre", 0, PX30_CLKGATE_CON(14), 10, GFLAGS), + GATE(PCLK_I2C1, "pclk_i2c1", "pclk_bus_pre", 0, PX30_CLKGATE_CON(14), 11, GFLAGS), + GATE(PCLK_I2C2, "pclk_i2c2", "pclk_bus_pre", 0, PX30_CLKGATE_CON(14), 12, GFLAGS), + GATE(PCLK_I2C3, "pclk_i2c3", "pclk_bus_pre", 0, PX30_CLKGATE_CON(14), 13, GFLAGS), + GATE(PCLK_I2C4, "pclk_i2c4", "pclk_bus_pre", 0, PX30_CLKGATE_CON(14), 14, GFLAGS), + GATE(PCLK_PWM0, "pclk_pwm0", "pclk_bus_pre", 0, PX30_CLKGATE_CON(14), 15, GFLAGS), + GATE(PCLK_PWM1, "pclk_pwm1", "pclk_bus_pre", 0, PX30_CLKGATE_CON(15), 0, GFLAGS), + GATE(PCLK_SPI0, "pclk_spi0", "pclk_bus_pre", 0, PX30_CLKGATE_CON(15), 1, GFLAGS), + GATE(PCLK_SPI1, "pclk_spi1", "pclk_bus_pre", 0, PX30_CLKGATE_CON(15), 2, GFLAGS), + GATE(PCLK_SARADC, "pclk_saradc", "pclk_bus_pre", 0, PX30_CLKGATE_CON(15), 3, GFLAGS), + GATE(PCLK_TSADC, "pclk_tsadc", "pclk_bus_pre", 0, PX30_CLKGATE_CON(15), 4, GFLAGS), + GATE(PCLK_TIMER, "pclk_timer", "pclk_bus_pre", 0, PX30_CLKGATE_CON(15), 5, GFLAGS), + GATE(PCLK_OTP_NS, "pclk_otp_ns", "pclk_bus_pre", CLK_IGNORE_UNUSED, PX30_CLKGATE_CON(15), 6, GFLAGS), + GATE(PCLK_WDT_NS, "pclk_wdt_ns", "pclk_bus_pre", CLK_IGNORE_UNUSED, PX30_CLKGATE_CON(15), 7, GFLAGS), + GATE(PCLK_GPIO1, "pclk_gpio1", "pclk_bus_pre", 0, PX30_CLKGATE_CON(15), 8, GFLAGS), + GATE(PCLK_GPIO2, "pclk_gpio2", "pclk_bus_pre", 0, PX30_CLKGATE_CON(15), 9, GFLAGS), + GATE(PCLK_GPIO3, "pclk_gpio3", "pclk_bus_pre", 0, PX30_CLKGATE_CON(15), 10, GFLAGS), + GATE(0, "pclk_grf", "pclk_bus_pre", CLK_IGNORE_UNUSED, PX30_CLKGATE_CON(15), 11, GFLAGS), + GATE(0, "pclk_sgrf", "pclk_bus_pre", CLK_IGNORE_UNUSED, PX30_CLKGATE_CON(15), 12, GFLAGS), + + /* PD_VPU */ + GATE(0, "hclk_vpu_niu", "hclk_vpu_pre", CLK_IGNORE_UNUSED, PX30_CLKGATE_CON(4), 7, GFLAGS), + GATE(HCLK_VPU, "hclk_vpu", "hclk_vpu_pre", 0, PX30_CLKGATE_CON(4), 6, GFLAGS), + GATE(0, "aclk_vpu_niu", "aclk_vpu_pre", CLK_IGNORE_UNUSED, PX30_CLKGATE_CON(4), 5, GFLAGS), + GATE(ACLK_VPU, "aclk_vpu", "aclk_vpu_pre", 0, PX30_CLKGATE_CON(4), 4, GFLAGS), + + /* PD_CRYPTO */ + GATE(0, "hclk_crypto_niu", "hclk_crypto_pre", CLK_IGNORE_UNUSED, PX30_CLKGATE_CON(9), 3, GFLAGS), + GATE(HCLK_CRYPTO, "hclk_crypto", "hclk_crypto_pre", 0, PX30_CLKGATE_CON(9), 5, GFLAGS), + GATE(0, "aclk_crypto_niu", "aclk_crypto_pre", CLK_IGNORE_UNUSED, PX30_CLKGATE_CON(9), 2, GFLAGS), + GATE(ACLK_CRYPTO, "aclk_crypto", "aclk_crypto_pre", 0, PX30_CLKGATE_CON(9), 4, GFLAGS), + + /* PD_SDCARD */ + GATE(0, "hclk_sdmmc_niu", "hclk_sdmmc_pre", CLK_IGNORE_UNUSED, PX30_CLKGATE_CON(7), 0, GFLAGS), + GATE(HCLK_SDMMC, "hclk_sdmmc", "hclk_sdmmc_pre", 0, PX30_CLKGATE_CON(7), 1, GFLAGS), + + /* PD_PERI */ + GATE(0, "aclk_peri_niu", "aclk_peri_pre", CLK_IGNORE_UNUSED, PX30_CLKGATE_CON(5), 9, GFLAGS), + + /* PD_MMC_NAND */ + GATE(HCLK_NANDC, "hclk_nandc", "hclk_mmc_nand", 0, PX30_CLKGATE_CON(5), 15, GFLAGS), + GATE(0, "hclk_mmc_nand_niu", "hclk_mmc_nand", CLK_IGNORE_UNUSED, PX30_CLKGATE_CON(6), 8, GFLAGS), + GATE(HCLK_SDIO, "hclk_sdio", "hclk_mmc_nand", 0, PX30_CLKGATE_CON(6), 9, GFLAGS), + GATE(HCLK_EMMC, "hclk_emmc", "hclk_mmc_nand", 0, PX30_CLKGATE_CON(6), 10, GFLAGS), + GATE(HCLK_SFC, "hclk_sfc", "hclk_mmc_nand", 0, PX30_CLKGATE_CON(6), 11, GFLAGS), + + /* PD_USB */ + GATE(0, "hclk_usb_niu", "hclk_usb", CLK_IGNORE_UNUSED, PX30_CLKGATE_CON(7), 4, GFLAGS), + GATE(HCLK_OTG, "hclk_otg", "hclk_usb", 0, PX30_CLKGATE_CON(7), 5, GFLAGS), + GATE(HCLK_HOST, "hclk_host", "hclk_usb", 0, PX30_CLKGATE_CON(7), 6, GFLAGS), + GATE(HCLK_HOST_ARB, "hclk_host_arb", "hclk_usb", CLK_IGNORE_UNUSED, PX30_CLKGATE_CON(7), 8, GFLAGS), + + /* PD_GMAC */ + GATE(0, "aclk_gmac_niu", "aclk_gmac_pre", CLK_IGNORE_UNUSED, + PX30_CLKGATE_CON(8), 0, GFLAGS), + GATE(ACLK_GMAC, "aclk_gmac", "aclk_gmac_pre", 0, + PX30_CLKGATE_CON(8), 2, GFLAGS), + GATE(0, "pclk_gmac_niu", "pclk_gmac_pre", CLK_IGNORE_UNUSED, + PX30_CLKGATE_CON(8), 1, GFLAGS), + GATE(PCLK_GMAC, "pclk_gmac", "pclk_gmac_pre", 0, + PX30_CLKGATE_CON(8), 3, GFLAGS), +}; + +static struct rockchip_clk_branch px30_clk_pmu_branches[] __initdata = { + /* + * Clock-Architecture Diagram 2 + */ + + COMPOSITE_FRACMUX(0, "clk_rtc32k_frac", "xin24m", CLK_IGNORE_UNUSED, + PX30_PMU_CLKSEL_CON(1), 0, + PX30_PMU_CLKGATE_CON(0), 13, GFLAGS, + &px30_rtc32k_pmu_fracmux), + + COMPOSITE_NOMUX(XIN24M_DIV, "xin24m_div", "xin24m", CLK_IGNORE_UNUSED, + PX30_PMU_CLKSEL_CON(0), 8, 5, DFLAGS, + PX30_PMU_CLKGATE_CON(0), 12, GFLAGS), + + COMPOSITE_NOMUX(0, "clk_wifi_pmu_src", "gpll", 0, + PX30_PMU_CLKSEL_CON(2), 8, 6, DFLAGS, + PX30_PMU_CLKGATE_CON(0), 14, GFLAGS), + COMPOSITE_NODIV(SCLK_WIFI_PMU, "clk_wifi_pmu", mux_wifi_pmu_p, CLK_SET_RATE_PARENT, + PX30_PMU_CLKSEL_CON(2), 15, 1, MFLAGS, + PX30_PMU_CLKGATE_CON(0), 15, GFLAGS), + + COMPOSITE(0, "clk_uart0_pmu_src", mux_uart_src_p, 0, + PX30_PMU_CLKSEL_CON(3), 14, 2, MFLAGS, 0, 5, DFLAGS, + PX30_PMU_CLKGATE_CON(1), 0, GFLAGS), + COMPOSITE_NOMUX_HALFDIV(0, "clk_uart0_np5", "clk_uart0_pmu_src", 0, + PX30_PMU_CLKSEL_CON(4), 0, 5, DFLAGS, + PX30_PMU_CLKGATE_CON(1), 1, GFLAGS), + COMPOSITE_FRACMUX(0, "clk_uart0_frac", "clk_uart0_pmu_src", CLK_SET_RATE_PARENT, + PX30_PMU_CLKSEL_CON(5), 0, + PX30_PMU_CLKGATE_CON(1), 2, GFLAGS, + &px30_uart0_pmu_fracmux), + GATE(SCLK_UART0_PMU, "clk_uart0_pmu", "clk_uart0_pmu_mux", CLK_SET_RATE_PARENT, + PX30_PMU_CLKGATE_CON(1), 3, GFLAGS), + + GATE(SCLK_PVTM_PMU, "clk_pvtm_pmu", "xin24m", 0, + PX30_PMU_CLKGATE_CON(1), 4, GFLAGS), + + COMPOSITE_NOMUX(PCLK_PMU_PRE, "pclk_pmu_pre", "gpll", 0, + PX30_PMU_CLKSEL_CON(0), 0, 5, DFLAGS, + PX30_PMU_CLKGATE_CON(0), 0, GFLAGS), + + COMPOSITE_NOMUX(SCLK_REF24M_PMU, "clk_ref24m_pmu", "gpll", 0, + PX30_PMU_CLKSEL_CON(2), 0, 6, DFLAGS, + PX30_PMU_CLKGATE_CON(1), 8, GFLAGS), + COMPOSITE_NODIV(SCLK_USBPHY_REF, "clk_usbphy_ref", mux_usbphy_ref_p, CLK_SET_RATE_PARENT, + PX30_PMU_CLKSEL_CON(2), 6, 1, MFLAGS, + PX30_PMU_CLKGATE_CON(1), 9, GFLAGS), + COMPOSITE_NODIV(SCLK_MIPIDSIPHY_REF, "clk_mipidsiphy_ref", mux_mipidsiphy_ref_p, CLK_SET_RATE_PARENT, + PX30_PMU_CLKSEL_CON(2), 7, 1, MFLAGS, + PX30_PMU_CLKGATE_CON(1), 10, GFLAGS), + + /* + * Clock-Architecture Diagram 9 + */ + + /* PD_PMU */ + GATE(0, "pclk_pmu_niu", "pclk_pmu_pre", CLK_IGNORE_UNUSED, PX30_PMU_CLKGATE_CON(0), 1, GFLAGS), + GATE(0, "pclk_pmu_sgrf", "pclk_pmu_pre", CLK_IGNORE_UNUSED, PX30_PMU_CLKGATE_CON(0), 2, GFLAGS), + GATE(0, "pclk_pmu_grf", "pclk_pmu_pre", CLK_IGNORE_UNUSED, PX30_PMU_CLKGATE_CON(0), 3, GFLAGS), + GATE(0, "pclk_pmu", "pclk_pmu_pre", CLK_IGNORE_UNUSED, PX30_PMU_CLKGATE_CON(0), 4, GFLAGS), + GATE(0, "pclk_pmu_mem", "pclk_pmu_pre", CLK_IGNORE_UNUSED, PX30_PMU_CLKGATE_CON(0), 5, GFLAGS), + GATE(PCLK_GPIO0_PMU, "pclk_gpio0_pmu", "pclk_pmu_pre", 0, PX30_PMU_CLKGATE_CON(0), 6, GFLAGS), + GATE(PCLK_UART0_PMU, "pclk_uart0_pmu", "pclk_pmu_pre", 0, PX30_PMU_CLKGATE_CON(0), 7, GFLAGS), + GATE(0, "pclk_cru_pmu", "pclk_pmu_pre", CLK_IGNORE_UNUSED, PX30_PMU_CLKGATE_CON(0), 8, GFLAGS), +}; + +static const char *const px30_pmucru_critical_clocks[] __initconst = { + "aclk_bus_pre", + "pclk_bus_pre", + "hclk_bus_pre", + "aclk_peri_pre", + "hclk_peri_pre", + "aclk_gpu_niu", + "pclk_top_pre", + "pclk_pmu_pre", + "hclk_usb_niu", + "pll_npll", + "usb480m", + "clk_uart2", + "pclk_uart2", +}; + +static void __init px30_clk_init(struct device_node *np) +{ + struct rockchip_clk_provider *ctx; + void __iomem *reg_base; + struct clk *clk; + + reg_base = of_iomap(np, 0); + if (!reg_base) { + pr_err("%s: could not map cru region\n", __func__); + return; + } + + ctx = rockchip_clk_init(np, reg_base, CLK_NR_CLKS); + if (IS_ERR(ctx)) { + pr_err("%s: rockchip clk init failed\n", __func__); + iounmap(reg_base); + return; + } + + /* aclk_dmac is controlled by sgrf_soc_con1[11]. */ + clk = clk_register_fixed_factor(NULL, "aclk_dmac", "aclk_bus_pre", 0, 1, 1); + if (IS_ERR(clk)) + pr_warn("%s: could not register clock aclk_dmac: %ld\n", + __func__, PTR_ERR(clk)); + else + rockchip_clk_add_lookup(ctx, clk, ACLK_DMAC); + + rockchip_clk_register_plls(ctx, px30_pll_clks, + ARRAY_SIZE(px30_pll_clks), + PX30_GRF_SOC_STATUS0); + rockchip_clk_register_branches(ctx, px30_clk_branches, + ARRAY_SIZE(px30_clk_branches)); + + rockchip_clk_register_armclk(ctx, ARMCLK, "armclk", + mux_armclk_p, ARRAY_SIZE(mux_armclk_p), + &px30_cpuclk_data, px30_cpuclk_rates, + ARRAY_SIZE(px30_cpuclk_rates)); + + rockchip_register_softrst(np, 12, reg_base + PX30_SOFTRST_CON(0), + ROCKCHIP_SOFTRST_HIWORD_MASK); + + rockchip_register_restart_notifier(ctx, PX30_GLB_SRST_FST, NULL); + + rockchip_clk_of_add_provider(np, ctx); +} +CLK_OF_DECLARE(px30_cru, "rockchip,px30-cru", px30_clk_init); + +static void __init px30_pmu_clk_init(struct device_node *np) +{ + struct rockchip_clk_provider *ctx; + void __iomem *reg_base; + + reg_base = of_iomap(np, 0); + if (!reg_base) { + pr_err("%s: could not map cru pmu region\n", __func__); + return; + } + + ctx = rockchip_clk_init(np, reg_base, CLKPMU_NR_CLKS); + if (IS_ERR(ctx)) { + pr_err("%s: rockchip pmu clk init failed\n", __func__); + return; + } + + rockchip_clk_register_plls(ctx, px30_pmu_pll_clks, + ARRAY_SIZE(px30_pmu_pll_clks), PX30_GRF_SOC_STATUS0); + + rockchip_clk_register_branches(ctx, px30_clk_pmu_branches, + ARRAY_SIZE(px30_clk_pmu_branches)); + + rockchip_clk_protect_critical(px30_pmucru_critical_clocks, + ARRAY_SIZE(px30_pmucru_critical_clocks)); + + rockchip_clk_of_add_provider(np, ctx); +} +CLK_OF_DECLARE(px30_cru_pmu, "rockchip,px30-pmucru", px30_pmu_clk_init); diff --git a/drivers/clk/rockchip/clk.h b/drivers/clk/rockchip/clk.h index 23c569a875d4b..6b53fff4cc96b 100644 --- a/drivers/clk/rockchip/clk.h +++ b/drivers/clk/rockchip/clk.h @@ -34,7 +34,46 @@ struct clk; #define HIWORD_UPDATE(val, mask, shift) \ ((val) << (shift) | (mask) << ((shift) + 16)) -/* register positions shared by RV1108, RK2928, RK3036, RK3066, RK3188 and RK3228 */ +/* register positions shared by PX30, RV1108, RK2928, RK3036, RK3066, RK3188 and RK3228 */ +#define BOOST_PLL_H_CON(x) ((x) * 0x4) +#define BOOST_CLK_CON 0x0008 +#define BOOST_BOOST_CON 0x000c +#define BOOST_SWITCH_CNT 0x0010 +#define BOOST_HIGH_PERF_CNT0 0x0014 +#define BOOST_HIGH_PERF_CNT1 0x0018 +#define BOOST_STATIS_THRESHOLD 0x001c +#define BOOST_SHORT_SWITCH_CNT 0x0020 +#define BOOST_SWITCH_THRESHOLD 0x0024 +#define BOOST_FSM_STATUS 0x0028 +#define BOOST_PLL_L_CON(x) ((x) * 0x4 + 0x2c) +#define BOOST_RECOVERY_MASK 0x1 +#define BOOST_RECOVERY_SHIFT 1 +#define BOOST_SW_CTRL_MASK 0x1 +#define BOOST_SW_CTRL_SHIFT 2 +#define BOOST_LOW_FREQ_EN_MASK 0x1 +#define BOOST_LOW_FREQ_EN_SHIFT 3 +#define BOOST_BUSY_STATE BIT(8) + +#define PX30_PLL_CON(x) ((x) * 0x4) +#define PX30_CLKSEL_CON(x) ((x) * 0x4 + 0x100) +#define PX30_CLKGATE_CON(x) ((x) * 0x4 + 0x200) +#define PX30_GLB_SRST_FST 0xb8 +#define PX30_GLB_SRST_SND 0xbc +#define PX30_SOFTRST_CON(x) ((x) * 0x4 + 0x300) +#define PX30_MODE_CON 0xa0 +#define PX30_MISC_CON 0xa4 +#define PX30_SDMMC_CON0 0x380 +#define PX30_SDMMC_CON1 0x384 +#define PX30_SDIO_CON0 0x388 +#define PX30_SDIO_CON1 0x38c +#define PX30_EMMC_CON0 0x390 +#define PX30_EMMC_CON1 0x394 + +#define PX30_PMU_PLL_CON(x) ((x) * 0x4) +#define PX30_PMU_CLKSEL_CON(x) ((x) * 0x4 + 0x40) +#define PX30_PMU_CLKGATE_CON(x) ((x) * 0x4 + 0x80) +#define PX30_PMU_MODE 0x0020 + #define RV1108_PLL_CON(x) ((x) * 0x4) #define RV1108_CLKSEL_CON(x) ((x) * 0x4 + 0x60) #define RV1108_CLKGATE_CON(x) ((x) * 0x4 + 0x120) From a64ad008980c65d38e6cf6858429c78e6b740c41 Mon Sep 17 00:00:00 2001 From: Alberto Panizzo Date: Fri, 6 Jul 2018 15:18:51 +0200 Subject: [PATCH 12/27] clk: rockchip: fix clk_i2sout parent selection bits on rk3399 Register, shift and mask were wrong according to datasheet. Fixes: 115510053e5e ("clk: rockchip: add clock controller for the RK3399") Cc: stable@vger.kernel.org Signed-off-by: Alberto Panizzo Signed-off-by: Anthony Brandon Signed-off-by: Heiko Stuebner --- drivers/clk/rockchip/clk-rk3399.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/rockchip/clk-rk3399.c b/drivers/clk/rockchip/clk-rk3399.c index bca10d618f0a8..2a8634a52856e 100644 --- a/drivers/clk/rockchip/clk-rk3399.c +++ b/drivers/clk/rockchip/clk-rk3399.c @@ -631,7 +631,7 @@ static struct rockchip_clk_branch rk3399_clk_branches[] __initdata = { MUX(0, "clk_i2sout_src", mux_i2sch_p, CLK_SET_RATE_PARENT, RK3399_CLKSEL_CON(31), 0, 2, MFLAGS), COMPOSITE_NODIV(SCLK_I2S_8CH_OUT, "clk_i2sout", mux_i2sout_p, CLK_SET_RATE_PARENT, - RK3399_CLKSEL_CON(30), 8, 2, MFLAGS, + RK3399_CLKSEL_CON(31), 2, 1, MFLAGS, RK3399_CLKGATE_CON(8), 12, GFLAGS), /* uart */ From de3c1e71d412d7e254e3eebeb82e260fb8513566 Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Wed, 4 Jul 2018 18:54:57 +0200 Subject: [PATCH 13/27] clk: meson: expose GEN_CLK clkid Expose GEN_CLK clock id Signed-off-by: Jerome Brunet --- include/dt-bindings/clock/axg-clkc.h | 1 + include/dt-bindings/clock/gxbb-clkc.h | 1 + 2 files changed, 2 insertions(+) diff --git a/include/dt-bindings/clock/axg-clkc.h b/include/dt-bindings/clock/axg-clkc.h index 70371228b7e02..fd1f938c38d19 100644 --- a/include/dt-bindings/clock/axg-clkc.h +++ b/include/dt-bindings/clock/axg-clkc.h @@ -71,5 +71,6 @@ #define CLKID_PCIE_CML_EN0 79 #define CLKID_PCIE_CML_EN1 80 #define CLKID_MIPI_ENABLE 81 +#define CLKID_GEN_CLK 84 #endif /* __AXG_CLKC_H */ diff --git a/include/dt-bindings/clock/gxbb-clkc.h b/include/dt-bindings/clock/gxbb-clkc.h index 7a892be905491..3979d48c025f6 100644 --- a/include/dt-bindings/clock/gxbb-clkc.h +++ b/include/dt-bindings/clock/gxbb-clkc.h @@ -127,5 +127,6 @@ #define CLKID_VAPB 140 #define CLKID_VDEC_1 153 #define CLKID_VDEC_HEVC 156 +#define CLKID_GEN_CLK 159 #endif /* __GXBB_CLKC_H */ From 60e267f3fd73366feac2c0be5a50feb24118c2ca Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Tue, 19 Jun 2018 18:00:50 +0200 Subject: [PATCH 14/27] clk: meson: remove obsolete register access The legacy method to access the hhi register space is not longer used. We can safely drop it now. Acked-by: Neil Armstrong Signed-off-by: Jerome Brunet --- drivers/clk/meson/axg.c | 37 ++----------------------------------- drivers/clk/meson/gxbb.c | 36 ++---------------------------------- 2 files changed, 4 insertions(+), 69 deletions(-) diff --git a/drivers/clk/meson/axg.c b/drivers/clk/meson/axg.c index bd4dbc696b88f..3fb884db1b10f 100644 --- a/drivers/clk/meson/axg.c +++ b/drivers/clk/meson/axg.c @@ -12,7 +12,6 @@ #include #include #include -#include #include #include #include @@ -995,49 +994,17 @@ static const struct of_device_id clkc_match_table[] = { {} }; -static const struct regmap_config clkc_regmap_config = { - .reg_bits = 32, - .val_bits = 32, - .reg_stride = 4, -}; - static int axg_clkc_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; - struct resource *res; - void __iomem *clk_base = NULL; struct regmap *map; int ret, i; /* Get the hhi system controller node if available */ map = syscon_node_to_regmap(of_get_parent(dev->of_node)); if (IS_ERR(map)) { - dev_err(dev, - "failed to get HHI regmap - Trying obsolete regs\n"); - - /* - * FIXME: HHI registers should be accessed through - * the appropriate system controller. This is required because - * there is more than just clocks in this register space - * - * This fallback method is only provided temporarily until - * all the platform DTs are properly using the syscon node - */ - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) - return -EINVAL; - - - clk_base = devm_ioremap(dev, res->start, resource_size(res)); - if (!clk_base) { - dev_err(dev, "Unable to map clk base\n"); - return -ENXIO; - } - - map = devm_regmap_init_mmio(dev, clk_base, - &clkc_regmap_config); - if (IS_ERR(map)) - return PTR_ERR(map); + dev_err(dev, "failed to get HHI regmap\n"); + return PTR_ERR(map); } /* Populate regmap for the regmap backed clocks */ diff --git a/drivers/clk/meson/gxbb.c b/drivers/clk/meson/gxbb.c index 177fffb9ebefe..297ebc3914750 100644 --- a/drivers/clk/meson/gxbb.c +++ b/drivers/clk/meson/gxbb.c @@ -7,7 +7,6 @@ #include #include #include -#include #include #include #include @@ -2228,17 +2227,9 @@ static const struct of_device_id clkc_match_table[] = { {}, }; -static const struct regmap_config clkc_regmap_config = { - .reg_bits = 32, - .val_bits = 32, - .reg_stride = 4, -}; - static int gxbb_clkc_probe(struct platform_device *pdev) { const struct clkc_data *clkc_data; - struct resource *res; - void __iomem *clk_base; struct regmap *map; int ret, i; struct device *dev = &pdev->dev; @@ -2250,31 +2241,8 @@ static int gxbb_clkc_probe(struct platform_device *pdev) /* Get the hhi system controller node if available */ map = syscon_node_to_regmap(of_get_parent(dev->of_node)); if (IS_ERR(map)) { - dev_err(dev, - "failed to get HHI regmap - Trying obsolete regs\n"); - - /* - * FIXME: HHI registers should be accessed through - * the appropriate system controller. This is required because - * there is more than just clocks in this register space - * - * This fallback method is only provided temporarily until - * all the platform DTs are properly using the syscon node - */ - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) - return -EINVAL; - - clk_base = devm_ioremap(dev, res->start, resource_size(res)); - if (!clk_base) { - dev_err(dev, "Unable to map clk base\n"); - return -ENXIO; - } - - map = devm_regmap_init_mmio(dev, clk_base, - &clkc_regmap_config); - if (IS_ERR(map)) - return PTR_ERR(map); + dev_err(dev, "failed to get HHI regmap\n"); + return PTR_ERR(map); } /* Populate regmap for the common regmap backed clocks */ From 443f2285789d2a4bf616b610c4cd8db839660a4a Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Tue, 22 May 2018 18:34:52 +0200 Subject: [PATCH 15/27] clk: meson: clean-up meson clock configuration Clean the dependencies in meson clock Kconfig. CLK_AMLOGIC should actually select CLK_REGMAP_MESON which it uses. Also, each platform should select CLK_AMLOGIC, so everything is properly turned on when the platform Kconfig enable each configuration flag Acked-by: Neil Armstrong Signed-off-by: Jerome Brunet --- drivers/clk/meson/Kconfig | 14 +++++--------- 1 file changed, 5 insertions(+), 9 deletions(-) diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig index 815659eebea3e..9d00809f07fc9 100644 --- a/drivers/clk/meson/Kconfig +++ b/drivers/clk/meson/Kconfig @@ -1,13 +1,14 @@ config COMMON_CLK_AMLOGIC bool - depends on OF depends on ARCH_MESON || COMPILE_TEST + select COMMON_CLK_REGMAP_MESON config COMMON_CLK_MESON_AO bool depends on OF depends on ARCH_MESON || COMPILE_TEST select COMMON_CLK_REGMAP_MESON + select RESET_CONTROLLER config COMMON_CLK_REGMAP_MESON bool @@ -15,9 +16,8 @@ config COMMON_CLK_REGMAP_MESON config COMMON_CLK_MESON8B bool - depends on COMMON_CLK_AMLOGIC + select COMMON_CLK_AMLOGIC select RESET_CONTROLLER - select COMMON_CLK_REGMAP_MESON help Support for the clock controller on AmLogic S802 (Meson8), S805 (Meson8b) and S812 (Meson8m2) devices. Say Y if you @@ -25,10 +25,8 @@ config COMMON_CLK_MESON8B config COMMON_CLK_GXBB bool - depends on COMMON_CLK_AMLOGIC - select RESET_CONTROLLER + select COMMON_CLK_AMLOGIC select COMMON_CLK_MESON_AO - select COMMON_CLK_REGMAP_MESON select MFD_SYSCON help Support for the clock controller on AmLogic S905 devices, aka gxbb. @@ -36,10 +34,8 @@ config COMMON_CLK_GXBB config COMMON_CLK_AXG bool - depends on COMMON_CLK_AMLOGIC - select RESET_CONTROLLER + select COMMON_CLK_AMLOGIC select COMMON_CLK_MESON_AO - select COMMON_CLK_REGMAP_MESON select MFD_SYSCON help Support for the clock controller on AmLogic A113D devices, aka axg. From 47f21315a6e4454ed9d8a450288a0989113e1e44 Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Tue, 22 May 2018 18:34:53 +0200 Subject: [PATCH 16/27] clk: meson: add clk-phase clock driver Add a driver based meson clk-regmap to control clock phase on amlogic SoCs Acked-by: Neil Armstrong Signed-off-by: Jerome Brunet --- drivers/clk/meson/Makefile | 1 + drivers/clk/meson/clk-phase.c | 63 +++++++++++++++++++++++++++++++++++ drivers/clk/meson/clkc.h | 8 +++++ 3 files changed, 72 insertions(+) create mode 100644 drivers/clk/meson/clk-phase.c diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile index d0d13aeb369a8..162e4a6f5c556 100644 --- a/drivers/clk/meson/Makefile +++ b/drivers/clk/meson/Makefile @@ -3,6 +3,7 @@ # obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-pll.o clk-mpll.o clk-audio-divider.o +obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-phase.o obj-$(CONFIG_COMMON_CLK_MESON_AO) += meson-aoclk.o obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o gxbb-aoclk-32k.o diff --git a/drivers/clk/meson/clk-phase.c b/drivers/clk/meson/clk-phase.c new file mode 100644 index 0000000000000..cba43748ce3df --- /dev/null +++ b/drivers/clk/meson/clk-phase.c @@ -0,0 +1,63 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (c) 2018 BayLibre, SAS. + * Author: Jerome Brunet + */ + +#include +#include "clkc.h" + +#define phase_step(_width) (360 / (1 << (_width))) + +static inline struct meson_clk_phase_data * +meson_clk_phase_data(struct clk_regmap *clk) +{ + return (struct meson_clk_phase_data *)clk->data; +} + +int meson_clk_degrees_from_val(unsigned int val, unsigned int width) +{ + return phase_step(width) * val; +} +EXPORT_SYMBOL_GPL(meson_clk_degrees_from_val); + +unsigned int meson_clk_degrees_to_val(int degrees, unsigned int width) +{ + unsigned int val = DIV_ROUND_CLOSEST(degrees, phase_step(width)); + + /* + * This last calculation is here for cases when degrees is rounded + * to 360, in which case val == (1 << width). + */ + return val % (1 << width); +} +EXPORT_SYMBOL_GPL(meson_clk_degrees_to_val); + +static int meson_clk_phase_get_phase(struct clk_hw *hw) +{ + struct clk_regmap *clk = to_clk_regmap(hw); + struct meson_clk_phase_data *phase = meson_clk_phase_data(clk); + unsigned int val; + + val = meson_parm_read(clk->map, &phase->ph); + + return meson_clk_degrees_from_val(val, phase->ph.width); +} + +static int meson_clk_phase_set_phase(struct clk_hw *hw, int degrees) +{ + struct clk_regmap *clk = to_clk_regmap(hw); + struct meson_clk_phase_data *phase = meson_clk_phase_data(clk); + unsigned int val; + + val = meson_clk_degrees_to_val(degrees, phase->ph.width); + meson_parm_write(clk->map, &phase->ph, val); + + return 0; +} + +const struct clk_ops meson_clk_phase_ops = { + .get_phase = meson_clk_phase_get_phase, + .set_phase = meson_clk_phase_set_phase, +}; +EXPORT_SYMBOL_GPL(meson_clk_phase_ops); diff --git a/drivers/clk/meson/clkc.h b/drivers/clk/meson/clkc.h index 2fb084330ee98..fd520ccdd1be2 100644 --- a/drivers/clk/meson/clkc.h +++ b/drivers/clk/meson/clkc.h @@ -96,6 +96,13 @@ struct meson_clk_audio_div_data { u8 flags; }; +struct meson_clk_phase_data { + struct parm ph; +}; + +int meson_clk_degrees_from_val(unsigned int val, unsigned int width); +unsigned int meson_clk_degrees_to_val(int degrees, unsigned int width); + #define MESON_GATE(_name, _reg, _bit) \ struct clk_regmap _name = { \ .data = &(struct clk_regmap_gate_data){ \ @@ -119,5 +126,6 @@ extern const struct clk_ops meson_clk_mpll_ro_ops; extern const struct clk_ops meson_clk_mpll_ops; extern const struct clk_ops meson_clk_audio_divider_ro_ops; extern const struct clk_ops meson_clk_audio_divider_ops; +extern const struct clk_ops meson_clk_phase_ops; #endif /* __CLKC_H */ From e8dd9207763e0317ac256c78dcd50dca7826f2f6 Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Tue, 22 May 2018 18:34:54 +0200 Subject: [PATCH 17/27] clk: meson: add triple phase clock driver Add a driver to control the output of the sample clock generator found in the axg audio clock controller. The goal of this driver is to coherently control the phase provided to the different element using the sample clock generator. This simplify the usage of the sample clock generator a lot, without comprising the ability of the SoC. Acked-by: Neil Armstrong Signed-off-by: Jerome Brunet --- drivers/clk/meson/Kconfig | 5 +++ drivers/clk/meson/Makefile | 1 + drivers/clk/meson/clk-triphase.c | 68 ++++++++++++++++++++++++++++++++ drivers/clk/meson/clkc-audio.h | 20 ++++++++++ 4 files changed, 94 insertions(+) create mode 100644 drivers/clk/meson/clk-triphase.c create mode 100644 drivers/clk/meson/clkc-audio.h diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig index 9d00809f07fc9..9ad95966aa3d5 100644 --- a/drivers/clk/meson/Kconfig +++ b/drivers/clk/meson/Kconfig @@ -3,6 +3,11 @@ config COMMON_CLK_AMLOGIC depends on ARCH_MESON || COMPILE_TEST select COMMON_CLK_REGMAP_MESON +config COMMON_CLK_AMLOGIC_AUDIO + bool + depends on ARCH_MESON || COMPILE_TEST + select COMMON_CLK_AMLOGIC + config COMMON_CLK_MESON_AO bool depends on OF diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile index 162e4a6f5c556..74ec070b09748 100644 --- a/drivers/clk/meson/Makefile +++ b/drivers/clk/meson/Makefile @@ -4,6 +4,7 @@ obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-pll.o clk-mpll.o clk-audio-divider.o obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-phase.o +obj-$(CONFIG_COMMON_CLK_AMLOGIC_AUDIO) += clk-triphase.o obj-$(CONFIG_COMMON_CLK_MESON_AO) += meson-aoclk.o obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o gxbb-aoclk-32k.o diff --git a/drivers/clk/meson/clk-triphase.c b/drivers/clk/meson/clk-triphase.c new file mode 100644 index 0000000000000..4a59936251e57 --- /dev/null +++ b/drivers/clk/meson/clk-triphase.c @@ -0,0 +1,68 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (c) 2018 BayLibre, SAS. + * Author: Jerome Brunet + */ + +#include +#include "clkc-audio.h" + +/* + * This is a special clock for the audio controller. + * The phase of mst_sclk clock output can be controlled independently + * for the outside world (ph0), the tdmout (ph1) and tdmin (ph2). + * Controlling these 3 phases as just one makes things simpler and + * give the same clock view to all the element on the i2s bus. + * If necessary, we can still control the phase in the tdm block + * which makes these independent control redundant. + */ +static inline struct meson_clk_triphase_data * +meson_clk_triphase_data(struct clk_regmap *clk) +{ + return (struct meson_clk_triphase_data *)clk->data; +} + +static void meson_clk_triphase_sync(struct clk_hw *hw) +{ + struct clk_regmap *clk = to_clk_regmap(hw); + struct meson_clk_triphase_data *tph = meson_clk_triphase_data(clk); + unsigned int val; + + /* Get phase 0 and sync it to phase 1 and 2 */ + val = meson_parm_read(clk->map, &tph->ph0); + meson_parm_write(clk->map, &tph->ph1, val); + meson_parm_write(clk->map, &tph->ph2, val); +} + +static int meson_clk_triphase_get_phase(struct clk_hw *hw) +{ + struct clk_regmap *clk = to_clk_regmap(hw); + struct meson_clk_triphase_data *tph = meson_clk_triphase_data(clk); + unsigned int val; + + /* Phase are in sync, reading phase 0 is enough */ + val = meson_parm_read(clk->map, &tph->ph0); + + return meson_clk_degrees_from_val(val, tph->ph0.width); +} + +static int meson_clk_triphase_set_phase(struct clk_hw *hw, int degrees) +{ + struct clk_regmap *clk = to_clk_regmap(hw); + struct meson_clk_triphase_data *tph = meson_clk_triphase_data(clk); + unsigned int val; + + val = meson_clk_degrees_to_val(degrees, tph->ph0.width); + meson_parm_write(clk->map, &tph->ph0, val); + meson_parm_write(clk->map, &tph->ph1, val); + meson_parm_write(clk->map, &tph->ph2, val); + + return 0; +} + +const struct clk_ops meson_clk_triphase_ops = { + .init = meson_clk_triphase_sync, + .get_phase = meson_clk_triphase_get_phase, + .set_phase = meson_clk_triphase_set_phase, +}; +EXPORT_SYMBOL_GPL(meson_clk_triphase_ops); diff --git a/drivers/clk/meson/clkc-audio.h b/drivers/clk/meson/clkc-audio.h new file mode 100644 index 0000000000000..286ff1201258c --- /dev/null +++ b/drivers/clk/meson/clkc-audio.h @@ -0,0 +1,20 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2018 BayLibre, SAS. + * Author: Jerome Brunet + */ + +#ifndef __MESON_CLKC_AUDIO_H +#define __MESON_CLKC_AUDIO_H + +#include "clkc.h" + +struct meson_clk_triphase_data { + struct parm ph0; + struct parm ph1; + struct parm ph2; +}; + +extern const struct clk_ops meson_clk_triphase_ops; + +#endif /* __MESON_CLKC_AUDIO_H */ From 3054a55c5dd2619a597d6e96d8589318f2b210ad Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Tue, 22 May 2018 18:34:55 +0200 Subject: [PATCH 18/27] clk: meson: add axg audio sclk divider driver Add a driver to control the clock divider found in the sample clock generator of the axg audio clock controller. The sclk divider accumulates specific features which make the generic divider unsuitable to control it: - zero based divider (div = val + 1), but zero value gates the clock, so minimum divider value is 2. - lrclk variant may adjust the duty cycle depending the divider value and the 'hi' value. Acked-by: Neil Armstrong Signed-off-by: Jerome Brunet --- drivers/clk/meson/Makefile | 2 +- drivers/clk/meson/clkc-audio.h | 8 ++ drivers/clk/meson/sclk-div.c | 243 +++++++++++++++++++++++++++++++++ 3 files changed, 252 insertions(+), 1 deletion(-) create mode 100644 drivers/clk/meson/sclk-div.c diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile index 74ec070b09748..1574e3f0de5c2 100644 --- a/drivers/clk/meson/Makefile +++ b/drivers/clk/meson/Makefile @@ -4,7 +4,7 @@ obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-pll.o clk-mpll.o clk-audio-divider.o obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-phase.o -obj-$(CONFIG_COMMON_CLK_AMLOGIC_AUDIO) += clk-triphase.o +obj-$(CONFIG_COMMON_CLK_AMLOGIC_AUDIO) += clk-triphase.o sclk-div.o obj-$(CONFIG_COMMON_CLK_MESON_AO) += meson-aoclk.o obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o gxbb-aoclk-32k.o diff --git a/drivers/clk/meson/clkc-audio.h b/drivers/clk/meson/clkc-audio.h index 286ff1201258c..0a7c157ebf816 100644 --- a/drivers/clk/meson/clkc-audio.h +++ b/drivers/clk/meson/clkc-audio.h @@ -15,6 +15,14 @@ struct meson_clk_triphase_data { struct parm ph2; }; +struct meson_sclk_div_data { + struct parm div; + struct parm hi; + unsigned int cached_div; + struct clk_duty cached_duty; +}; + extern const struct clk_ops meson_clk_triphase_ops; +extern const struct clk_ops meson_sclk_div_ops; #endif /* __MESON_CLKC_AUDIO_H */ diff --git a/drivers/clk/meson/sclk-div.c b/drivers/clk/meson/sclk-div.c new file mode 100644 index 0000000000000..bc64019b8eeb1 --- /dev/null +++ b/drivers/clk/meson/sclk-div.c @@ -0,0 +1,243 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (c) 2018 BayLibre, SAS. + * Author: Jerome Brunet + * + * Sample clock generator divider: + * This HW divider gates with value 0 but is otherwise a zero based divider: + * + * val >= 1 + * divider = val + 1 + * + * The duty cycle may also be set for the LR clock variant. The duty cycle + * ratio is: + * + * hi = [0 - val] + * duty_cycle = (1 + hi) / (1 + val) + */ + +#include "clkc-audio.h" + +static inline struct meson_sclk_div_data * +meson_sclk_div_data(struct clk_regmap *clk) +{ + return (struct meson_sclk_div_data *)clk->data; +} + +static int sclk_div_maxval(struct meson_sclk_div_data *sclk) +{ + return (1 << sclk->div.width) - 1; +} + +static int sclk_div_maxdiv(struct meson_sclk_div_data *sclk) +{ + return sclk_div_maxval(sclk) + 1; +} + +static int sclk_div_getdiv(struct clk_hw *hw, unsigned long rate, + unsigned long prate, int maxdiv) +{ + int div = DIV_ROUND_CLOSEST_ULL((u64)prate, rate); + + return clamp(div, 2, maxdiv); +} + +static int sclk_div_bestdiv(struct clk_hw *hw, unsigned long rate, + unsigned long *prate, + struct meson_sclk_div_data *sclk) +{ + struct clk_hw *parent = clk_hw_get_parent(hw); + int bestdiv = 0, i; + unsigned long maxdiv, now, parent_now; + unsigned long best = 0, best_parent = 0; + + if (!rate) + rate = 1; + + maxdiv = sclk_div_maxdiv(sclk); + + if (!(clk_hw_get_flags(hw) & CLK_SET_RATE_PARENT)) + return sclk_div_getdiv(hw, rate, *prate, maxdiv); + + /* + * The maximum divider we can use without overflowing + * unsigned long in rate * i below + */ + maxdiv = min(ULONG_MAX / rate, maxdiv); + + for (i = 2; i <= maxdiv; i++) { + /* + * It's the most ideal case if the requested rate can be + * divided from parent clock without needing to change + * parent rate, so return the divider immediately. + */ + if (rate * i == *prate) + return i; + + parent_now = clk_hw_round_rate(parent, rate * i); + now = DIV_ROUND_UP_ULL((u64)parent_now, i); + + if (abs(rate - now) < abs(rate - best)) { + bestdiv = i; + best = now; + best_parent = parent_now; + } + } + + if (!bestdiv) + bestdiv = sclk_div_maxdiv(sclk); + else + *prate = best_parent; + + return bestdiv; +} + +static long sclk_div_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *prate) +{ + struct clk_regmap *clk = to_clk_regmap(hw); + struct meson_sclk_div_data *sclk = meson_sclk_div_data(clk); + int div; + + div = sclk_div_bestdiv(hw, rate, prate, sclk); + + return DIV_ROUND_UP_ULL((u64)*prate, div); +} + +static void sclk_apply_ratio(struct clk_regmap *clk, + struct meson_sclk_div_data *sclk) +{ + unsigned int hi = DIV_ROUND_CLOSEST(sclk->cached_div * + sclk->cached_duty.num, + sclk->cached_duty.den); + + if (hi) + hi -= 1; + + meson_parm_write(clk->map, &sclk->hi, hi); +} + +static int sclk_div_set_duty_cycle(struct clk_hw *hw, + struct clk_duty *duty) +{ + struct clk_regmap *clk = to_clk_regmap(hw); + struct meson_sclk_div_data *sclk = meson_sclk_div_data(clk); + + if (MESON_PARM_APPLICABLE(&sclk->hi)) { + memcpy(&sclk->cached_duty, duty, sizeof(*duty)); + sclk_apply_ratio(clk, sclk); + } + + return 0; +} + +static int sclk_div_get_duty_cycle(struct clk_hw *hw, + struct clk_duty *duty) +{ + struct clk_regmap *clk = to_clk_regmap(hw); + struct meson_sclk_div_data *sclk = meson_sclk_div_data(clk); + int hi; + + if (!MESON_PARM_APPLICABLE(&sclk->hi)) { + duty->num = 1; + duty->den = 2; + return 0; + } + + hi = meson_parm_read(clk->map, &sclk->hi); + duty->num = hi + 1; + duty->den = sclk->cached_div; + return 0; +} + +static void sclk_apply_divider(struct clk_regmap *clk, + struct meson_sclk_div_data *sclk) +{ + if (MESON_PARM_APPLICABLE(&sclk->hi)) + sclk_apply_ratio(clk, sclk); + + meson_parm_write(clk->map, &sclk->div, sclk->cached_div - 1); +} + +static int sclk_div_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long prate) +{ + struct clk_regmap *clk = to_clk_regmap(hw); + struct meson_sclk_div_data *sclk = meson_sclk_div_data(clk); + unsigned long maxdiv = sclk_div_maxdiv(sclk); + + sclk->cached_div = sclk_div_getdiv(hw, rate, prate, maxdiv); + + if (clk_hw_is_enabled(hw)) + sclk_apply_divider(clk, sclk); + + return 0; +} + +static unsigned long sclk_div_recalc_rate(struct clk_hw *hw, + unsigned long prate) +{ + struct clk_regmap *clk = to_clk_regmap(hw); + struct meson_sclk_div_data *sclk = meson_sclk_div_data(clk); + + return DIV_ROUND_UP_ULL((u64)prate, sclk->cached_div); +} + +static int sclk_div_enable(struct clk_hw *hw) +{ + struct clk_regmap *clk = to_clk_regmap(hw); + struct meson_sclk_div_data *sclk = meson_sclk_div_data(clk); + + sclk_apply_divider(clk, sclk); + + return 0; +} + +static void sclk_div_disable(struct clk_hw *hw) +{ + struct clk_regmap *clk = to_clk_regmap(hw); + struct meson_sclk_div_data *sclk = meson_sclk_div_data(clk); + + meson_parm_write(clk->map, &sclk->div, 0); +} + +static int sclk_div_is_enabled(struct clk_hw *hw) +{ + struct clk_regmap *clk = to_clk_regmap(hw); + struct meson_sclk_div_data *sclk = meson_sclk_div_data(clk); + + if (meson_parm_read(clk->map, &sclk->div)) + return 1; + + return 0; +} + +static void sclk_div_init(struct clk_hw *hw) +{ + struct clk_regmap *clk = to_clk_regmap(hw); + struct meson_sclk_div_data *sclk = meson_sclk_div_data(clk); + unsigned int val; + + val = meson_parm_read(clk->map, &sclk->div); + + /* if the divider is initially disabled, assume max */ + if (!val) + sclk->cached_div = sclk_div_maxdiv(sclk); + else + sclk->cached_div = val + 1; + + sclk_div_get_duty_cycle(hw, &sclk->cached_duty); +} + +const struct clk_ops meson_sclk_div_ops = { + .recalc_rate = sclk_div_recalc_rate, + .round_rate = sclk_div_round_rate, + .set_rate = sclk_div_set_rate, + .enable = sclk_div_enable, + .disable = sclk_div_disable, + .is_enabled = sclk_div_is_enabled, + .get_duty_cycle = sclk_div_get_duty_cycle, + .set_duty_cycle = sclk_div_set_duty_cycle, + .init = sclk_div_init, +}; +EXPORT_SYMBOL_GPL(meson_sclk_div_ops); From 1cd50181750f4bde1e4305812a8df5a5731ed28a Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Tue, 22 May 2018 18:34:57 +0200 Subject: [PATCH 19/27] clk: meson: axg: add the audio clock controller driver The axg audio clock controller is the clock generation unit for the amlogic audio subsystem of A113 based SoCs. It may be clocked by 8 different plls provided by the primary clock controller and also by 10 slave bit clocks and 10 slave sample clocks which may be provided by external components, such as audio codecs, through the SoC pads. It contains several muxes, dividers and gates which are fed into the the different devices of the audio subsystem. Acked-by: Neil Armstrong Signed-off-by: Jerome Brunet --- drivers/clk/meson/Kconfig | 9 + drivers/clk/meson/Makefile | 1 + drivers/clk/meson/axg-audio.c | 845 ++++++++++++++++++++++++++++++++++ drivers/clk/meson/axg-audio.h | 127 +++++ 4 files changed, 982 insertions(+) create mode 100644 drivers/clk/meson/axg-audio.c create mode 100644 drivers/clk/meson/axg-audio.h diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig index 9ad95966aa3d5..efaa70f682b45 100644 --- a/drivers/clk/meson/Kconfig +++ b/drivers/clk/meson/Kconfig @@ -45,3 +45,12 @@ config COMMON_CLK_AXG help Support for the clock controller on AmLogic A113D devices, aka axg. Say Y if you want peripherals and CPU frequency scaling to work. + +config COMMON_CLK_AXG_AUDIO + tristate "Meson AXG Audio Clock Controller Driver" + depends on COMMON_CLK_AXG + select COMMON_CLK_AMLOGIC_AUDIO + select MFD_SYSCON + help + Support for the audio clock controller on AmLogic A113D devices, + aka axg, Say Y if you want audio subsystem to work. diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile index 1574e3f0de5c2..fd97f5ba317d0 100644 --- a/drivers/clk/meson/Makefile +++ b/drivers/clk/meson/Makefile @@ -9,4 +9,5 @@ obj-$(CONFIG_COMMON_CLK_MESON_AO) += meson-aoclk.o obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o gxbb-aoclk-32k.o obj-$(CONFIG_COMMON_CLK_AXG) += axg.o axg-aoclk.o +obj-$(CONFIG_COMMON_CLK_AXG_AUDIO) += axg-audio.o obj-$(CONFIG_COMMON_CLK_REGMAP_MESON) += clk-regmap.o diff --git a/drivers/clk/meson/axg-audio.c b/drivers/clk/meson/axg-audio.c new file mode 100644 index 0000000000000..a0ed41e73bdef --- /dev/null +++ b/drivers/clk/meson/axg-audio.c @@ -0,0 +1,845 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (c) 2018 BayLibre, SAS. + * Author: Jerome Brunet + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "clkc-audio.h" +#include "axg-audio.h" + +#define AXG_MST_IN_COUNT 8 +#define AXG_SLV_SCLK_COUNT 10 +#define AXG_SLV_LRCLK_COUNT 10 + +#define AXG_AUD_GATE(_name, _reg, _bit, _pname, _iflags) \ +struct clk_regmap axg_##_name = { \ + .data = &(struct clk_regmap_gate_data){ \ + .offset = (_reg), \ + .bit_idx = (_bit), \ + }, \ + .hw.init = &(struct clk_init_data) { \ + .name = "axg_"#_name, \ + .ops = &clk_regmap_gate_ops, \ + .parent_names = (const char *[]){ _pname }, \ + .num_parents = 1, \ + .flags = CLK_DUTY_CYCLE_PARENT | (_iflags), \ + }, \ +} + +#define AXG_AUD_MUX(_name, _reg, _mask, _shift, _dflags, _pnames, _iflags) \ +struct clk_regmap axg_##_name = { \ + .data = &(struct clk_regmap_mux_data){ \ + .offset = (_reg), \ + .mask = (_mask), \ + .shift = (_shift), \ + .flags = (_dflags), \ + }, \ + .hw.init = &(struct clk_init_data){ \ + .name = "axg_"#_name, \ + .ops = &clk_regmap_mux_ops, \ + .parent_names = (_pnames), \ + .num_parents = ARRAY_SIZE(_pnames), \ + .flags = CLK_DUTY_CYCLE_PARENT | (_iflags), \ + }, \ +} + +#define AXG_AUD_DIV(_name, _reg, _shift, _width, _dflags, _pname, _iflags) \ +struct clk_regmap axg_##_name = { \ + .data = &(struct clk_regmap_div_data){ \ + .offset = (_reg), \ + .shift = (_shift), \ + .width = (_width), \ + .flags = (_dflags), \ + }, \ + .hw.init = &(struct clk_init_data){ \ + .name = "axg_"#_name, \ + .ops = &clk_regmap_divider_ops, \ + .parent_names = (const char *[]) { _pname }, \ + .num_parents = 1, \ + .flags = (_iflags), \ + }, \ +} + +#define AXG_PCLK_GATE(_name, _bit) \ + AXG_AUD_GATE(_name, AUDIO_CLK_GATE_EN, _bit, "axg_audio_pclk", 0) + +/* Audio peripheral clocks */ +static AXG_PCLK_GATE(ddr_arb, 0); +static AXG_PCLK_GATE(pdm, 1); +static AXG_PCLK_GATE(tdmin_a, 2); +static AXG_PCLK_GATE(tdmin_b, 3); +static AXG_PCLK_GATE(tdmin_c, 4); +static AXG_PCLK_GATE(tdmin_lb, 5); +static AXG_PCLK_GATE(tdmout_a, 6); +static AXG_PCLK_GATE(tdmout_b, 7); +static AXG_PCLK_GATE(tdmout_c, 8); +static AXG_PCLK_GATE(frddr_a, 9); +static AXG_PCLK_GATE(frddr_b, 10); +static AXG_PCLK_GATE(frddr_c, 11); +static AXG_PCLK_GATE(toddr_a, 12); +static AXG_PCLK_GATE(toddr_b, 13); +static AXG_PCLK_GATE(toddr_c, 14); +static AXG_PCLK_GATE(loopback, 15); +static AXG_PCLK_GATE(spdifin, 16); +static AXG_PCLK_GATE(spdifout, 17); +static AXG_PCLK_GATE(resample, 18); +static AXG_PCLK_GATE(power_detect, 19); + +/* Audio Master Clocks */ +static const char * const mst_mux_parent_names[] = { + "axg_mst_in0", "axg_mst_in1", "axg_mst_in2", "axg_mst_in3", + "axg_mst_in4", "axg_mst_in5", "axg_mst_in6", "axg_mst_in7", +}; + +#define AXG_MST_MCLK_MUX(_name, _reg) \ + AXG_AUD_MUX(_name##_sel, _reg, 0x7, 24, CLK_MUX_ROUND_CLOSEST, \ + mst_mux_parent_names, CLK_SET_RATE_PARENT) + +static AXG_MST_MCLK_MUX(mst_a_mclk, AUDIO_MCLK_A_CTRL); +static AXG_MST_MCLK_MUX(mst_b_mclk, AUDIO_MCLK_B_CTRL); +static AXG_MST_MCLK_MUX(mst_c_mclk, AUDIO_MCLK_C_CTRL); +static AXG_MST_MCLK_MUX(mst_d_mclk, AUDIO_MCLK_D_CTRL); +static AXG_MST_MCLK_MUX(mst_e_mclk, AUDIO_MCLK_E_CTRL); +static AXG_MST_MCLK_MUX(mst_f_mclk, AUDIO_MCLK_F_CTRL); +static AXG_MST_MCLK_MUX(spdifout_clk, AUDIO_CLK_SPDIFOUT_CTRL); +static AXG_MST_MCLK_MUX(spdifin_clk, AUDIO_CLK_SPDIFIN_CTRL); +static AXG_MST_MCLK_MUX(pdm_dclk, AUDIO_CLK_PDMIN_CTRL0); +static AXG_MST_MCLK_MUX(pdm_sysclk, AUDIO_CLK_PDMIN_CTRL1); + +#define AXG_MST_MCLK_DIV(_name, _reg) \ + AXG_AUD_DIV(_name##_div, _reg, 0, 16, CLK_DIVIDER_ROUND_CLOSEST, \ + "axg_"#_name"_sel", CLK_SET_RATE_PARENT) \ + +static AXG_MST_MCLK_DIV(mst_a_mclk, AUDIO_MCLK_A_CTRL); +static AXG_MST_MCLK_DIV(mst_b_mclk, AUDIO_MCLK_B_CTRL); +static AXG_MST_MCLK_DIV(mst_c_mclk, AUDIO_MCLK_C_CTRL); +static AXG_MST_MCLK_DIV(mst_d_mclk, AUDIO_MCLK_D_CTRL); +static AXG_MST_MCLK_DIV(mst_e_mclk, AUDIO_MCLK_E_CTRL); +static AXG_MST_MCLK_DIV(mst_f_mclk, AUDIO_MCLK_F_CTRL); +static AXG_MST_MCLK_DIV(spdifout_clk, AUDIO_CLK_SPDIFOUT_CTRL); +static AXG_MST_MCLK_DIV(spdifin_clk, AUDIO_CLK_SPDIFIN_CTRL); +static AXG_MST_MCLK_DIV(pdm_dclk, AUDIO_CLK_PDMIN_CTRL0); +static AXG_MST_MCLK_DIV(pdm_sysclk, AUDIO_CLK_PDMIN_CTRL1); + +#define AXG_MST_MCLK_GATE(_name, _reg) \ + AXG_AUD_GATE(_name, _reg, 31, "axg_"#_name"_div", \ + CLK_SET_RATE_PARENT) + +static AXG_MST_MCLK_GATE(mst_a_mclk, AUDIO_MCLK_A_CTRL); +static AXG_MST_MCLK_GATE(mst_b_mclk, AUDIO_MCLK_B_CTRL); +static AXG_MST_MCLK_GATE(mst_c_mclk, AUDIO_MCLK_C_CTRL); +static AXG_MST_MCLK_GATE(mst_d_mclk, AUDIO_MCLK_D_CTRL); +static AXG_MST_MCLK_GATE(mst_e_mclk, AUDIO_MCLK_E_CTRL); +static AXG_MST_MCLK_GATE(mst_f_mclk, AUDIO_MCLK_F_CTRL); +static AXG_MST_MCLK_GATE(spdifout_clk, AUDIO_CLK_SPDIFOUT_CTRL); +static AXG_MST_MCLK_GATE(spdifin_clk, AUDIO_CLK_SPDIFIN_CTRL); +static AXG_MST_MCLK_GATE(pdm_dclk, AUDIO_CLK_PDMIN_CTRL0); +static AXG_MST_MCLK_GATE(pdm_sysclk, AUDIO_CLK_PDMIN_CTRL1); + +/* Sample Clocks */ +#define AXG_MST_SCLK_PRE_EN(_name, _reg) \ + AXG_AUD_GATE(mst_##_name##_sclk_pre_en, _reg, 31, \ + "axg_mst_"#_name"_mclk", 0) + +static AXG_MST_SCLK_PRE_EN(a, AUDIO_MST_A_SCLK_CTRL0); +static AXG_MST_SCLK_PRE_EN(b, AUDIO_MST_B_SCLK_CTRL0); +static AXG_MST_SCLK_PRE_EN(c, AUDIO_MST_C_SCLK_CTRL0); +static AXG_MST_SCLK_PRE_EN(d, AUDIO_MST_D_SCLK_CTRL0); +static AXG_MST_SCLK_PRE_EN(e, AUDIO_MST_E_SCLK_CTRL0); +static AXG_MST_SCLK_PRE_EN(f, AUDIO_MST_F_SCLK_CTRL0); + +#define AXG_AUD_SCLK_DIV(_name, _reg, _div_shift, _div_width, \ + _hi_shift, _hi_width, _pname, _iflags) \ +struct clk_regmap axg_##_name = { \ + .data = &(struct meson_sclk_div_data) { \ + .div = { \ + .reg_off = (_reg), \ + .shift = (_div_shift), \ + .width = (_div_width), \ + }, \ + .hi = { \ + .reg_off = (_reg), \ + .shift = (_hi_shift), \ + .width = (_hi_width), \ + }, \ + }, \ + .hw.init = &(struct clk_init_data) { \ + .name = "axg_"#_name, \ + .ops = &meson_sclk_div_ops, \ + .parent_names = (const char *[]) { _pname }, \ + .num_parents = 1, \ + .flags = (_iflags), \ + }, \ +} + +#define AXG_MST_SCLK_DIV(_name, _reg) \ + AXG_AUD_SCLK_DIV(mst_##_name##_sclk_div, _reg, 20, 10, 0, 0, \ + "axg_mst_"#_name"_sclk_pre_en", \ + CLK_SET_RATE_PARENT) + +static AXG_MST_SCLK_DIV(a, AUDIO_MST_A_SCLK_CTRL0); +static AXG_MST_SCLK_DIV(b, AUDIO_MST_B_SCLK_CTRL0); +static AXG_MST_SCLK_DIV(c, AUDIO_MST_C_SCLK_CTRL0); +static AXG_MST_SCLK_DIV(d, AUDIO_MST_D_SCLK_CTRL0); +static AXG_MST_SCLK_DIV(e, AUDIO_MST_E_SCLK_CTRL0); +static AXG_MST_SCLK_DIV(f, AUDIO_MST_F_SCLK_CTRL0); + +#define AXG_MST_SCLK_POST_EN(_name, _reg) \ + AXG_AUD_GATE(mst_##_name##_sclk_post_en, _reg, 30, \ + "axg_mst_"#_name"_sclk_div", CLK_SET_RATE_PARENT) + +static AXG_MST_SCLK_POST_EN(a, AUDIO_MST_A_SCLK_CTRL0); +static AXG_MST_SCLK_POST_EN(b, AUDIO_MST_B_SCLK_CTRL0); +static AXG_MST_SCLK_POST_EN(c, AUDIO_MST_C_SCLK_CTRL0); +static AXG_MST_SCLK_POST_EN(d, AUDIO_MST_D_SCLK_CTRL0); +static AXG_MST_SCLK_POST_EN(e, AUDIO_MST_E_SCLK_CTRL0); +static AXG_MST_SCLK_POST_EN(f, AUDIO_MST_F_SCLK_CTRL0); + +#define AXG_AUD_TRIPHASE(_name, _reg, _width, _shift0, _shift1, _shift2, \ + _pname, _iflags) \ +struct clk_regmap axg_##_name = { \ + .data = &(struct meson_clk_triphase_data) { \ + .ph0 = { \ + .reg_off = (_reg), \ + .shift = (_shift0), \ + .width = (_width), \ + }, \ + .ph1 = { \ + .reg_off = (_reg), \ + .shift = (_shift1), \ + .width = (_width), \ + }, \ + .ph2 = { \ + .reg_off = (_reg), \ + .shift = (_shift2), \ + .width = (_width), \ + }, \ + }, \ + .hw.init = &(struct clk_init_data) { \ + .name = "axg_"#_name, \ + .ops = &meson_clk_triphase_ops, \ + .parent_names = (const char *[]) { _pname }, \ + .num_parents = 1, \ + .flags = CLK_DUTY_CYCLE_PARENT | (_iflags), \ + }, \ +} + +#define AXG_MST_SCLK(_name, _reg) \ + AXG_AUD_TRIPHASE(mst_##_name##_sclk, _reg, 1, 0, 2, 4, \ + "axg_mst_"#_name"_sclk_post_en", CLK_SET_RATE_PARENT) + +static AXG_MST_SCLK(a, AUDIO_MST_A_SCLK_CTRL1); +static AXG_MST_SCLK(b, AUDIO_MST_B_SCLK_CTRL1); +static AXG_MST_SCLK(c, AUDIO_MST_C_SCLK_CTRL1); +static AXG_MST_SCLK(d, AUDIO_MST_D_SCLK_CTRL1); +static AXG_MST_SCLK(e, AUDIO_MST_E_SCLK_CTRL1); +static AXG_MST_SCLK(f, AUDIO_MST_F_SCLK_CTRL1); + +#define AXG_MST_LRCLK_DIV(_name, _reg) \ + AXG_AUD_SCLK_DIV(mst_##_name##_lrclk_div, _reg, 0, 10, 10, 10, \ + "axg_mst_"#_name"_sclk_post_en", 0) \ + +static AXG_MST_LRCLK_DIV(a, AUDIO_MST_A_SCLK_CTRL0); +static AXG_MST_LRCLK_DIV(b, AUDIO_MST_B_SCLK_CTRL0); +static AXG_MST_LRCLK_DIV(c, AUDIO_MST_C_SCLK_CTRL0); +static AXG_MST_LRCLK_DIV(d, AUDIO_MST_D_SCLK_CTRL0); +static AXG_MST_LRCLK_DIV(e, AUDIO_MST_E_SCLK_CTRL0); +static AXG_MST_LRCLK_DIV(f, AUDIO_MST_F_SCLK_CTRL0); + +#define AXG_MST_LRCLK(_name, _reg) \ + AXG_AUD_TRIPHASE(mst_##_name##_lrclk, _reg, 1, 1, 3, 5, \ + "axg_mst_"#_name"_lrclk_div", CLK_SET_RATE_PARENT) + +static AXG_MST_LRCLK(a, AUDIO_MST_A_SCLK_CTRL1); +static AXG_MST_LRCLK(b, AUDIO_MST_B_SCLK_CTRL1); +static AXG_MST_LRCLK(c, AUDIO_MST_C_SCLK_CTRL1); +static AXG_MST_LRCLK(d, AUDIO_MST_D_SCLK_CTRL1); +static AXG_MST_LRCLK(e, AUDIO_MST_E_SCLK_CTRL1); +static AXG_MST_LRCLK(f, AUDIO_MST_F_SCLK_CTRL1); + +static const char * const tdm_sclk_parent_names[] = { + "axg_mst_a_sclk", "axg_mst_b_sclk", "axg_mst_c_sclk", + "axg_mst_d_sclk", "axg_mst_e_sclk", "axg_mst_f_sclk", + "axg_slv_sclk0", "axg_slv_sclk1", "axg_slv_sclk2", + "axg_slv_sclk3", "axg_slv_sclk4", "axg_slv_sclk5", + "axg_slv_sclk6", "axg_slv_sclk7", "axg_slv_sclk8", + "axg_slv_sclk9" +}; + +#define AXG_TDM_SCLK_MUX(_name, _reg) \ + AXG_AUD_MUX(tdm##_name##_sclk_sel, _reg, 0xf, 24, \ + CLK_MUX_ROUND_CLOSEST, \ + tdm_sclk_parent_names, 0) + +static AXG_TDM_SCLK_MUX(in_a, AUDIO_CLK_TDMIN_A_CTRL); +static AXG_TDM_SCLK_MUX(in_b, AUDIO_CLK_TDMIN_B_CTRL); +static AXG_TDM_SCLK_MUX(in_c, AUDIO_CLK_TDMIN_C_CTRL); +static AXG_TDM_SCLK_MUX(in_lb, AUDIO_CLK_TDMIN_LB_CTRL); +static AXG_TDM_SCLK_MUX(out_a, AUDIO_CLK_TDMOUT_A_CTRL); +static AXG_TDM_SCLK_MUX(out_b, AUDIO_CLK_TDMOUT_B_CTRL); +static AXG_TDM_SCLK_MUX(out_c, AUDIO_CLK_TDMOUT_C_CTRL); + +#define AXG_TDM_SCLK_PRE_EN(_name, _reg) \ + AXG_AUD_GATE(tdm##_name##_sclk_pre_en, _reg, 31, \ + "axg_tdm"#_name"_sclk_sel", CLK_SET_RATE_PARENT) + +static AXG_TDM_SCLK_PRE_EN(in_a, AUDIO_CLK_TDMIN_A_CTRL); +static AXG_TDM_SCLK_PRE_EN(in_b, AUDIO_CLK_TDMIN_B_CTRL); +static AXG_TDM_SCLK_PRE_EN(in_c, AUDIO_CLK_TDMIN_C_CTRL); +static AXG_TDM_SCLK_PRE_EN(in_lb, AUDIO_CLK_TDMIN_LB_CTRL); +static AXG_TDM_SCLK_PRE_EN(out_a, AUDIO_CLK_TDMOUT_A_CTRL); +static AXG_TDM_SCLK_PRE_EN(out_b, AUDIO_CLK_TDMOUT_B_CTRL); +static AXG_TDM_SCLK_PRE_EN(out_c, AUDIO_CLK_TDMOUT_C_CTRL); + +#define AXG_TDM_SCLK_POST_EN(_name, _reg) \ + AXG_AUD_GATE(tdm##_name##_sclk_post_en, _reg, 30, \ + "axg_tdm"#_name"_sclk_pre_en", CLK_SET_RATE_PARENT) + +static AXG_TDM_SCLK_POST_EN(in_a, AUDIO_CLK_TDMIN_A_CTRL); +static AXG_TDM_SCLK_POST_EN(in_b, AUDIO_CLK_TDMIN_B_CTRL); +static AXG_TDM_SCLK_POST_EN(in_c, AUDIO_CLK_TDMIN_C_CTRL); +static AXG_TDM_SCLK_POST_EN(in_lb, AUDIO_CLK_TDMIN_LB_CTRL); +static AXG_TDM_SCLK_POST_EN(out_a, AUDIO_CLK_TDMOUT_A_CTRL); +static AXG_TDM_SCLK_POST_EN(out_b, AUDIO_CLK_TDMOUT_B_CTRL); +static AXG_TDM_SCLK_POST_EN(out_c, AUDIO_CLK_TDMOUT_C_CTRL); + +#define AXG_TDM_SCLK(_name, _reg) \ + struct clk_regmap axg_tdm##_name##_sclk = { \ + .data = &(struct meson_clk_phase_data) { \ + .ph = { \ + .reg_off = (_reg), \ + .shift = 29, \ + .width = 1, \ + }, \ + }, \ + .hw.init = &(struct clk_init_data) { \ + .name = "axg_tdm"#_name"_sclk", \ + .ops = &meson_clk_phase_ops, \ + .parent_names = (const char *[]) \ + { "axg_tdm"#_name"_sclk_post_en" }, \ + .num_parents = 1, \ + .flags = CLK_DUTY_CYCLE_PARENT | CLK_SET_RATE_PARENT, \ + }, \ +} + +static AXG_TDM_SCLK(in_a, AUDIO_CLK_TDMIN_A_CTRL); +static AXG_TDM_SCLK(in_b, AUDIO_CLK_TDMIN_B_CTRL); +static AXG_TDM_SCLK(in_c, AUDIO_CLK_TDMIN_C_CTRL); +static AXG_TDM_SCLK(in_lb, AUDIO_CLK_TDMIN_LB_CTRL); +static AXG_TDM_SCLK(out_a, AUDIO_CLK_TDMOUT_A_CTRL); +static AXG_TDM_SCLK(out_b, AUDIO_CLK_TDMOUT_B_CTRL); +static AXG_TDM_SCLK(out_c, AUDIO_CLK_TDMOUT_C_CTRL); + +static const char * const tdm_lrclk_parent_names[] = { + "axg_mst_a_lrclk", "axg_mst_b_lrclk", "axg_mst_c_lrclk", + "axg_mst_d_lrclk", "axg_mst_e_lrclk", "axg_mst_f_lrclk", + "axg_slv_lrclk0", "axg_slv_lrclk1", "axg_slv_lrclk2", + "axg_slv_lrclk3", "axg_slv_lrclk4", "axg_slv_lrclk5", + "axg_slv_lrclk6", "axg_slv_lrclk7", "axg_slv_lrclk8", + "axg_slv_lrclk9" +}; + +#define AXG_TDM_LRLCK(_name, _reg) \ + AXG_AUD_MUX(tdm##_name##_lrclk, _reg, 0xf, 20, \ + CLK_MUX_ROUND_CLOSEST, \ + tdm_lrclk_parent_names, 0) + +static AXG_TDM_LRLCK(in_a, AUDIO_CLK_TDMIN_A_CTRL); +static AXG_TDM_LRLCK(in_b, AUDIO_CLK_TDMIN_B_CTRL); +static AXG_TDM_LRLCK(in_c, AUDIO_CLK_TDMIN_C_CTRL); +static AXG_TDM_LRLCK(in_lb, AUDIO_CLK_TDMIN_LB_CTRL); +static AXG_TDM_LRLCK(out_a, AUDIO_CLK_TDMOUT_A_CTRL); +static AXG_TDM_LRLCK(out_b, AUDIO_CLK_TDMOUT_B_CTRL); +static AXG_TDM_LRLCK(out_c, AUDIO_CLK_TDMOUT_C_CTRL); + +/* + * Array of all clocks provided by this provider + * The input clocks of the controller will be populated at runtime + */ +static struct clk_hw_onecell_data axg_audio_hw_onecell_data = { + .hws = { + [AUD_CLKID_DDR_ARB] = &axg_ddr_arb.hw, + [AUD_CLKID_PDM] = &axg_pdm.hw, + [AUD_CLKID_TDMIN_A] = &axg_tdmin_a.hw, + [AUD_CLKID_TDMIN_B] = &axg_tdmin_b.hw, + [AUD_CLKID_TDMIN_C] = &axg_tdmin_c.hw, + [AUD_CLKID_TDMIN_LB] = &axg_tdmin_lb.hw, + [AUD_CLKID_TDMOUT_A] = &axg_tdmout_a.hw, + [AUD_CLKID_TDMOUT_B] = &axg_tdmout_b.hw, + [AUD_CLKID_TDMOUT_C] = &axg_tdmout_c.hw, + [AUD_CLKID_FRDDR_A] = &axg_frddr_a.hw, + [AUD_CLKID_FRDDR_B] = &axg_frddr_b.hw, + [AUD_CLKID_FRDDR_C] = &axg_frddr_c.hw, + [AUD_CLKID_TODDR_A] = &axg_toddr_a.hw, + [AUD_CLKID_TODDR_B] = &axg_toddr_b.hw, + [AUD_CLKID_TODDR_C] = &axg_toddr_c.hw, + [AUD_CLKID_LOOPBACK] = &axg_loopback.hw, + [AUD_CLKID_SPDIFIN] = &axg_spdifin.hw, + [AUD_CLKID_SPDIFOUT] = &axg_spdifout.hw, + [AUD_CLKID_RESAMPLE] = &axg_resample.hw, + [AUD_CLKID_POWER_DETECT] = &axg_power_detect.hw, + [AUD_CLKID_MST_A_MCLK_SEL] = &axg_mst_a_mclk_sel.hw, + [AUD_CLKID_MST_B_MCLK_SEL] = &axg_mst_b_mclk_sel.hw, + [AUD_CLKID_MST_C_MCLK_SEL] = &axg_mst_c_mclk_sel.hw, + [AUD_CLKID_MST_D_MCLK_SEL] = &axg_mst_d_mclk_sel.hw, + [AUD_CLKID_MST_E_MCLK_SEL] = &axg_mst_e_mclk_sel.hw, + [AUD_CLKID_MST_F_MCLK_SEL] = &axg_mst_f_mclk_sel.hw, + [AUD_CLKID_MST_A_MCLK_DIV] = &axg_mst_a_mclk_div.hw, + [AUD_CLKID_MST_B_MCLK_DIV] = &axg_mst_b_mclk_div.hw, + [AUD_CLKID_MST_C_MCLK_DIV] = &axg_mst_c_mclk_div.hw, + [AUD_CLKID_MST_D_MCLK_DIV] = &axg_mst_d_mclk_div.hw, + [AUD_CLKID_MST_E_MCLK_DIV] = &axg_mst_e_mclk_div.hw, + [AUD_CLKID_MST_F_MCLK_DIV] = &axg_mst_f_mclk_div.hw, + [AUD_CLKID_MST_A_MCLK] = &axg_mst_a_mclk.hw, + [AUD_CLKID_MST_B_MCLK] = &axg_mst_b_mclk.hw, + [AUD_CLKID_MST_C_MCLK] = &axg_mst_c_mclk.hw, + [AUD_CLKID_MST_D_MCLK] = &axg_mst_d_mclk.hw, + [AUD_CLKID_MST_E_MCLK] = &axg_mst_e_mclk.hw, + [AUD_CLKID_MST_F_MCLK] = &axg_mst_f_mclk.hw, + [AUD_CLKID_SPDIFOUT_CLK_SEL] = &axg_spdifout_clk_sel.hw, + [AUD_CLKID_SPDIFOUT_CLK_DIV] = &axg_spdifout_clk_div.hw, + [AUD_CLKID_SPDIFOUT_CLK] = &axg_spdifout_clk.hw, + [AUD_CLKID_SPDIFIN_CLK_SEL] = &axg_spdifin_clk_sel.hw, + [AUD_CLKID_SPDIFIN_CLK_DIV] = &axg_spdifin_clk_div.hw, + [AUD_CLKID_SPDIFIN_CLK] = &axg_spdifin_clk.hw, + [AUD_CLKID_PDM_DCLK_SEL] = &axg_pdm_dclk_sel.hw, + [AUD_CLKID_PDM_DCLK_DIV] = &axg_pdm_dclk_div.hw, + [AUD_CLKID_PDM_DCLK] = &axg_pdm_dclk.hw, + [AUD_CLKID_PDM_SYSCLK_SEL] = &axg_pdm_sysclk_sel.hw, + [AUD_CLKID_PDM_SYSCLK_DIV] = &axg_pdm_sysclk_div.hw, + [AUD_CLKID_PDM_SYSCLK] = &axg_pdm_sysclk.hw, + [AUD_CLKID_MST_A_SCLK_PRE_EN] = &axg_mst_a_sclk_pre_en.hw, + [AUD_CLKID_MST_B_SCLK_PRE_EN] = &axg_mst_b_sclk_pre_en.hw, + [AUD_CLKID_MST_C_SCLK_PRE_EN] = &axg_mst_c_sclk_pre_en.hw, + [AUD_CLKID_MST_D_SCLK_PRE_EN] = &axg_mst_d_sclk_pre_en.hw, + [AUD_CLKID_MST_E_SCLK_PRE_EN] = &axg_mst_e_sclk_pre_en.hw, + [AUD_CLKID_MST_F_SCLK_PRE_EN] = &axg_mst_f_sclk_pre_en.hw, + [AUD_CLKID_MST_A_SCLK_DIV] = &axg_mst_a_sclk_div.hw, + [AUD_CLKID_MST_B_SCLK_DIV] = &axg_mst_b_sclk_div.hw, + [AUD_CLKID_MST_C_SCLK_DIV] = &axg_mst_c_sclk_div.hw, + [AUD_CLKID_MST_D_SCLK_DIV] = &axg_mst_d_sclk_div.hw, + [AUD_CLKID_MST_E_SCLK_DIV] = &axg_mst_e_sclk_div.hw, + [AUD_CLKID_MST_F_SCLK_DIV] = &axg_mst_f_sclk_div.hw, + [AUD_CLKID_MST_A_SCLK_POST_EN] = &axg_mst_a_sclk_post_en.hw, + [AUD_CLKID_MST_B_SCLK_POST_EN] = &axg_mst_b_sclk_post_en.hw, + [AUD_CLKID_MST_C_SCLK_POST_EN] = &axg_mst_c_sclk_post_en.hw, + [AUD_CLKID_MST_D_SCLK_POST_EN] = &axg_mst_d_sclk_post_en.hw, + [AUD_CLKID_MST_E_SCLK_POST_EN] = &axg_mst_e_sclk_post_en.hw, + [AUD_CLKID_MST_F_SCLK_POST_EN] = &axg_mst_f_sclk_post_en.hw, + [AUD_CLKID_MST_A_SCLK] = &axg_mst_a_sclk.hw, + [AUD_CLKID_MST_B_SCLK] = &axg_mst_b_sclk.hw, + [AUD_CLKID_MST_C_SCLK] = &axg_mst_c_sclk.hw, + [AUD_CLKID_MST_D_SCLK] = &axg_mst_d_sclk.hw, + [AUD_CLKID_MST_E_SCLK] = &axg_mst_e_sclk.hw, + [AUD_CLKID_MST_F_SCLK] = &axg_mst_f_sclk.hw, + [AUD_CLKID_MST_A_LRCLK_DIV] = &axg_mst_a_lrclk_div.hw, + [AUD_CLKID_MST_B_LRCLK_DIV] = &axg_mst_b_lrclk_div.hw, + [AUD_CLKID_MST_C_LRCLK_DIV] = &axg_mst_c_lrclk_div.hw, + [AUD_CLKID_MST_D_LRCLK_DIV] = &axg_mst_d_lrclk_div.hw, + [AUD_CLKID_MST_E_LRCLK_DIV] = &axg_mst_e_lrclk_div.hw, + [AUD_CLKID_MST_F_LRCLK_DIV] = &axg_mst_f_lrclk_div.hw, + [AUD_CLKID_MST_A_LRCLK] = &axg_mst_a_lrclk.hw, + [AUD_CLKID_MST_B_LRCLK] = &axg_mst_b_lrclk.hw, + [AUD_CLKID_MST_C_LRCLK] = &axg_mst_c_lrclk.hw, + [AUD_CLKID_MST_D_LRCLK] = &axg_mst_d_lrclk.hw, + [AUD_CLKID_MST_E_LRCLK] = &axg_mst_e_lrclk.hw, + [AUD_CLKID_MST_F_LRCLK] = &axg_mst_f_lrclk.hw, + [AUD_CLKID_TDMIN_A_SCLK_SEL] = &axg_tdmin_a_sclk_sel.hw, + [AUD_CLKID_TDMIN_B_SCLK_SEL] = &axg_tdmin_b_sclk_sel.hw, + [AUD_CLKID_TDMIN_C_SCLK_SEL] = &axg_tdmin_c_sclk_sel.hw, + [AUD_CLKID_TDMIN_LB_SCLK_SEL] = &axg_tdmin_lb_sclk_sel.hw, + [AUD_CLKID_TDMOUT_A_SCLK_SEL] = &axg_tdmout_a_sclk_sel.hw, + [AUD_CLKID_TDMOUT_B_SCLK_SEL] = &axg_tdmout_b_sclk_sel.hw, + [AUD_CLKID_TDMOUT_C_SCLK_SEL] = &axg_tdmout_c_sclk_sel.hw, + [AUD_CLKID_TDMIN_A_SCLK_PRE_EN] = &axg_tdmin_a_sclk_pre_en.hw, + [AUD_CLKID_TDMIN_B_SCLK_PRE_EN] = &axg_tdmin_b_sclk_pre_en.hw, + [AUD_CLKID_TDMIN_C_SCLK_PRE_EN] = &axg_tdmin_c_sclk_pre_en.hw, + [AUD_CLKID_TDMIN_LB_SCLK_PRE_EN] = &axg_tdmin_lb_sclk_pre_en.hw, + [AUD_CLKID_TDMOUT_A_SCLK_PRE_EN] = &axg_tdmout_a_sclk_pre_en.hw, + [AUD_CLKID_TDMOUT_B_SCLK_PRE_EN] = &axg_tdmout_b_sclk_pre_en.hw, + [AUD_CLKID_TDMOUT_C_SCLK_PRE_EN] = &axg_tdmout_c_sclk_pre_en.hw, + [AUD_CLKID_TDMIN_A_SCLK_POST_EN] = &axg_tdmin_a_sclk_post_en.hw, + [AUD_CLKID_TDMIN_B_SCLK_POST_EN] = &axg_tdmin_b_sclk_post_en.hw, + [AUD_CLKID_TDMIN_C_SCLK_POST_EN] = &axg_tdmin_c_sclk_post_en.hw, + [AUD_CLKID_TDMIN_LB_SCLK_POST_EN] = &axg_tdmin_lb_sclk_post_en.hw, + [AUD_CLKID_TDMOUT_A_SCLK_POST_EN] = &axg_tdmout_a_sclk_post_en.hw, + [AUD_CLKID_TDMOUT_B_SCLK_POST_EN] = &axg_tdmout_b_sclk_post_en.hw, + [AUD_CLKID_TDMOUT_C_SCLK_POST_EN] = &axg_tdmout_c_sclk_post_en.hw, + [AUD_CLKID_TDMIN_A_SCLK] = &axg_tdmin_a_sclk.hw, + [AUD_CLKID_TDMIN_B_SCLK] = &axg_tdmin_b_sclk.hw, + [AUD_CLKID_TDMIN_C_SCLK] = &axg_tdmin_c_sclk.hw, + [AUD_CLKID_TDMIN_LB_SCLK] = &axg_tdmin_lb_sclk.hw, + [AUD_CLKID_TDMOUT_A_SCLK] = &axg_tdmout_a_sclk.hw, + [AUD_CLKID_TDMOUT_B_SCLK] = &axg_tdmout_b_sclk.hw, + [AUD_CLKID_TDMOUT_C_SCLK] = &axg_tdmout_c_sclk.hw, + [AUD_CLKID_TDMIN_A_LRCLK] = &axg_tdmin_a_lrclk.hw, + [AUD_CLKID_TDMIN_B_LRCLK] = &axg_tdmin_b_lrclk.hw, + [AUD_CLKID_TDMIN_C_LRCLK] = &axg_tdmin_c_lrclk.hw, + [AUD_CLKID_TDMIN_LB_LRCLK] = &axg_tdmin_lb_lrclk.hw, + [AUD_CLKID_TDMOUT_A_LRCLK] = &axg_tdmout_a_lrclk.hw, + [AUD_CLKID_TDMOUT_B_LRCLK] = &axg_tdmout_b_lrclk.hw, + [AUD_CLKID_TDMOUT_C_LRCLK] = &axg_tdmout_c_lrclk.hw, + [NR_CLKS] = NULL, + }, + .num = NR_CLKS, +}; + +/* Convenience table to populate regmap in .probe() */ +static struct clk_regmap *const axg_audio_clk_regmaps[] = { + &axg_ddr_arb, + &axg_pdm, + &axg_tdmin_a, + &axg_tdmin_b, + &axg_tdmin_c, + &axg_tdmin_lb, + &axg_tdmout_a, + &axg_tdmout_b, + &axg_tdmout_c, + &axg_frddr_a, + &axg_frddr_b, + &axg_frddr_c, + &axg_toddr_a, + &axg_toddr_b, + &axg_toddr_c, + &axg_loopback, + &axg_spdifin, + &axg_spdifout, + &axg_resample, + &axg_power_detect, + &axg_mst_a_mclk_sel, + &axg_mst_b_mclk_sel, + &axg_mst_c_mclk_sel, + &axg_mst_d_mclk_sel, + &axg_mst_e_mclk_sel, + &axg_mst_f_mclk_sel, + &axg_mst_a_mclk_div, + &axg_mst_b_mclk_div, + &axg_mst_c_mclk_div, + &axg_mst_d_mclk_div, + &axg_mst_e_mclk_div, + &axg_mst_f_mclk_div, + &axg_mst_a_mclk, + &axg_mst_b_mclk, + &axg_mst_c_mclk, + &axg_mst_d_mclk, + &axg_mst_e_mclk, + &axg_mst_f_mclk, + &axg_spdifout_clk_sel, + &axg_spdifout_clk_div, + &axg_spdifout_clk, + &axg_spdifin_clk_sel, + &axg_spdifin_clk_div, + &axg_spdifin_clk, + &axg_pdm_dclk_sel, + &axg_pdm_dclk_div, + &axg_pdm_dclk, + &axg_pdm_sysclk_sel, + &axg_pdm_sysclk_div, + &axg_pdm_sysclk, + &axg_mst_a_sclk_pre_en, + &axg_mst_b_sclk_pre_en, + &axg_mst_c_sclk_pre_en, + &axg_mst_d_sclk_pre_en, + &axg_mst_e_sclk_pre_en, + &axg_mst_f_sclk_pre_en, + &axg_mst_a_sclk_div, + &axg_mst_b_sclk_div, + &axg_mst_c_sclk_div, + &axg_mst_d_sclk_div, + &axg_mst_e_sclk_div, + &axg_mst_f_sclk_div, + &axg_mst_a_sclk_post_en, + &axg_mst_b_sclk_post_en, + &axg_mst_c_sclk_post_en, + &axg_mst_d_sclk_post_en, + &axg_mst_e_sclk_post_en, + &axg_mst_f_sclk_post_en, + &axg_mst_a_sclk, + &axg_mst_b_sclk, + &axg_mst_c_sclk, + &axg_mst_d_sclk, + &axg_mst_e_sclk, + &axg_mst_f_sclk, + &axg_mst_a_lrclk_div, + &axg_mst_b_lrclk_div, + &axg_mst_c_lrclk_div, + &axg_mst_d_lrclk_div, + &axg_mst_e_lrclk_div, + &axg_mst_f_lrclk_div, + &axg_mst_a_lrclk, + &axg_mst_b_lrclk, + &axg_mst_c_lrclk, + &axg_mst_d_lrclk, + &axg_mst_e_lrclk, + &axg_mst_f_lrclk, + &axg_tdmin_a_sclk_sel, + &axg_tdmin_b_sclk_sel, + &axg_tdmin_c_sclk_sel, + &axg_tdmin_lb_sclk_sel, + &axg_tdmout_a_sclk_sel, + &axg_tdmout_b_sclk_sel, + &axg_tdmout_c_sclk_sel, + &axg_tdmin_a_sclk_pre_en, + &axg_tdmin_b_sclk_pre_en, + &axg_tdmin_c_sclk_pre_en, + &axg_tdmin_lb_sclk_pre_en, + &axg_tdmout_a_sclk_pre_en, + &axg_tdmout_b_sclk_pre_en, + &axg_tdmout_c_sclk_pre_en, + &axg_tdmin_a_sclk_post_en, + &axg_tdmin_b_sclk_post_en, + &axg_tdmin_c_sclk_post_en, + &axg_tdmin_lb_sclk_post_en, + &axg_tdmout_a_sclk_post_en, + &axg_tdmout_b_sclk_post_en, + &axg_tdmout_c_sclk_post_en, + &axg_tdmin_a_sclk, + &axg_tdmin_b_sclk, + &axg_tdmin_c_sclk, + &axg_tdmin_lb_sclk, + &axg_tdmout_a_sclk, + &axg_tdmout_b_sclk, + &axg_tdmout_c_sclk, + &axg_tdmin_a_lrclk, + &axg_tdmin_b_lrclk, + &axg_tdmin_c_lrclk, + &axg_tdmin_lb_lrclk, + &axg_tdmout_a_lrclk, + &axg_tdmout_b_lrclk, + &axg_tdmout_c_lrclk, +}; + +static struct clk *devm_clk_get_enable(struct device *dev, char *id) +{ + struct clk *clk; + int ret; + + clk = devm_clk_get(dev, id); + if (IS_ERR(clk)) { + if (PTR_ERR(clk) != -EPROBE_DEFER) + dev_err(dev, "failed to get %s", id); + return clk; + } + + ret = clk_prepare_enable(clk); + if (ret) { + dev_err(dev, "failed to enable %s", id); + return ERR_PTR(ret); + } + + ret = devm_add_action_or_reset(dev, + (void(*)(void *))clk_disable_unprepare, + clk); + if (ret) { + dev_err(dev, "failed to add reset action on %s", id); + return ERR_PTR(ret); + } + + return clk; +} + +static const struct clk_ops axg_clk_no_ops = {}; + +static struct clk_hw *axg_clk_hw_register_bypass(struct device *dev, + const char *name, + const char *parent_name) +{ + struct clk_hw *hw; + struct clk_init_data init; + char *clk_name; + int ret; + + hw = devm_kzalloc(dev, sizeof(*hw), GFP_KERNEL); + if (!hw) + return ERR_PTR(-ENOMEM); + + clk_name = kasprintf(GFP_KERNEL, "axg_%s", name); + if (!clk_name) + return ERR_PTR(-ENOMEM); + + init.name = clk_name; + init.ops = &axg_clk_no_ops; + init.flags = 0; + init.parent_names = parent_name ? &parent_name : NULL; + init.num_parents = parent_name ? 1 : 0; + hw->init = &init; + + ret = devm_clk_hw_register(dev, hw); + kfree(clk_name); + + return ret ? ERR_PTR(ret) : hw; +} + +static int axg_register_clk_hw_input(struct device *dev, + const char *name, + unsigned int clkid) +{ + struct clk *parent_clk = devm_clk_get(dev, name); + struct clk_hw *hw = NULL; + + if (IS_ERR(parent_clk)) { + int err = PTR_ERR(parent_clk); + + /* It is ok if an input clock is missing */ + if (err == -ENOENT) { + dev_dbg(dev, "%s not provided", name); + } else { + if (err != -EPROBE_DEFER) + dev_err(dev, "failed to get %s clock", name); + return err; + } + } else { + hw = axg_clk_hw_register_bypass(dev, name, + __clk_get_name(parent_clk)); + } + + if (IS_ERR(hw)) { + dev_err(dev, "failed to register %s clock", name); + return PTR_ERR(hw); + } + + axg_audio_hw_onecell_data.hws[clkid] = hw; + return 0; +} + +static int axg_register_clk_hw_inputs(struct device *dev, + const char *basename, + unsigned int count, + unsigned int clkid) +{ + char *name; + int i, ret; + + for (i = 0; i < count; i++) { + name = kasprintf(GFP_KERNEL, "%s%d", basename, i); + if (!name) + return -ENOMEM; + + ret = axg_register_clk_hw_input(dev, name, clkid + i); + kfree(name); + if (ret) + return ret; + } + + return 0; +} + +static const struct regmap_config axg_audio_regmap_cfg = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, + .max_register = AUDIO_CLK_PDMIN_CTRL1, +}; + +static int axg_audio_clkc_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct regmap *map; + struct resource *res; + void __iomem *regs; + struct clk *clk; + struct clk_hw *hw; + int ret, i; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + regs = devm_ioremap_resource(dev, res); + if (IS_ERR(regs)) + return PTR_ERR(regs); + + map = devm_regmap_init_mmio(dev, regs, &axg_audio_regmap_cfg); + if (IS_ERR(map)) { + dev_err(dev, "failed to init regmap: %ld\n", PTR_ERR(map)); + return PTR_ERR(map); + } + + /* Get the mandatory peripheral clock */ + clk = devm_clk_get_enable(dev, "pclk"); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + ret = device_reset(dev); + if (ret) { + dev_err(dev, "failed to reset device\n"); + return ret; + } + + /* Register the peripheral input clock */ + hw = axg_clk_hw_register_bypass(dev, "audio_pclk", + __clk_get_name(clk)); + if (IS_ERR(hw)) + return PTR_ERR(hw); + + axg_audio_hw_onecell_data.hws[AUD_CLKID_PCLK] = hw; + + /* Register optional input master clocks */ + ret = axg_register_clk_hw_inputs(dev, "mst_in", + AXG_MST_IN_COUNT, + AUD_CLKID_MST0); + if (ret) + return ret; + + /* Register optional input slave sclks */ + ret = axg_register_clk_hw_inputs(dev, "slv_sclk", + AXG_SLV_SCLK_COUNT, + AUD_CLKID_SLV_SCLK0); + if (ret) + return ret; + + /* Register optional input slave lrclks */ + ret = axg_register_clk_hw_inputs(dev, "slv_lrclk", + AXG_SLV_LRCLK_COUNT, + AUD_CLKID_SLV_LRCLK0); + if (ret) + return ret; + + /* Populate regmap for the regmap backed clocks */ + for (i = 0; i < ARRAY_SIZE(axg_audio_clk_regmaps); i++) + axg_audio_clk_regmaps[i]->map = map; + + /* Take care to skip the registered input clocks */ + for (i = AUD_CLKID_DDR_ARB; i < axg_audio_hw_onecell_data.num; i++) { + hw = axg_audio_hw_onecell_data.hws[i]; + /* array might be sparse */ + if (!hw) + continue; + + ret = devm_clk_hw_register(dev, hw); + if (ret) { + dev_err(dev, "failed to register clock %s\n", + hw->init->name); + return ret; + } + } + + return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, + &axg_audio_hw_onecell_data); +} + +static const struct of_device_id clkc_match_table[] = { + { .compatible = "amlogic,axg-audio-clkc" }, + {} +}; +MODULE_DEVICE_TABLE(of, clkc_match_table); + +static struct platform_driver axg_audio_driver = { + .probe = axg_audio_clkc_probe, + .driver = { + .name = "axg-audio-clkc", + .of_match_table = clkc_match_table, + }, +}; +module_platform_driver(axg_audio_driver); + +MODULE_DESCRIPTION("Amlogic A113x Audio Clock driver"); +MODULE_AUTHOR("Jerome Brunet "); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/clk/meson/axg-audio.h b/drivers/clk/meson/axg-audio.h new file mode 100644 index 0000000000000..7191b39c9d650 --- /dev/null +++ b/drivers/clk/meson/axg-audio.h @@ -0,0 +1,127 @@ +/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */ +/* + * Copyright (c) 2018 BayLibre, SAS. + * Author: Jerome Brunet + */ + +#ifndef __AXG_AUDIO_CLKC_H +#define __AXG_AUDIO_CLKC_H + +/* + * Audio Clock register offsets + * + * Register offsets from the datasheet must be multiplied by 4 before + * to get the right offset + */ +#define AUDIO_CLK_GATE_EN 0x000 +#define AUDIO_MCLK_A_CTRL 0x004 +#define AUDIO_MCLK_B_CTRL 0x008 +#define AUDIO_MCLK_C_CTRL 0x00C +#define AUDIO_MCLK_D_CTRL 0x010 +#define AUDIO_MCLK_E_CTRL 0x014 +#define AUDIO_MCLK_F_CTRL 0x018 +#define AUDIO_MST_A_SCLK_CTRL0 0x040 +#define AUDIO_MST_A_SCLK_CTRL1 0x044 +#define AUDIO_MST_B_SCLK_CTRL0 0x048 +#define AUDIO_MST_B_SCLK_CTRL1 0x04C +#define AUDIO_MST_C_SCLK_CTRL0 0x050 +#define AUDIO_MST_C_SCLK_CTRL1 0x054 +#define AUDIO_MST_D_SCLK_CTRL0 0x058 +#define AUDIO_MST_D_SCLK_CTRL1 0x05C +#define AUDIO_MST_E_SCLK_CTRL0 0x060 +#define AUDIO_MST_E_SCLK_CTRL1 0x064 +#define AUDIO_MST_F_SCLK_CTRL0 0x068 +#define AUDIO_MST_F_SCLK_CTRL1 0x06C +#define AUDIO_CLK_TDMIN_A_CTRL 0x080 +#define AUDIO_CLK_TDMIN_B_CTRL 0x084 +#define AUDIO_CLK_TDMIN_C_CTRL 0x088 +#define AUDIO_CLK_TDMIN_LB_CTRL 0x08C +#define AUDIO_CLK_TDMOUT_A_CTRL 0x090 +#define AUDIO_CLK_TDMOUT_B_CTRL 0x094 +#define AUDIO_CLK_TDMOUT_C_CTRL 0x098 +#define AUDIO_CLK_SPDIFIN_CTRL 0x09C +#define AUDIO_CLK_SPDIFOUT_CTRL 0x0A0 +#define AUDIO_CLK_RESAMPLE_CTRL 0x0A4 +#define AUDIO_CLK_LOCKER_CTRL 0x0A8 +#define AUDIO_CLK_PDMIN_CTRL0 0x0AC +#define AUDIO_CLK_PDMIN_CTRL1 0x0B0 + +/* + * CLKID index values + * These indices are entirely contrived and do not map onto the hardware. + */ + +#define AUD_CLKID_PCLK 0 +#define AUD_CLKID_MST0 1 +#define AUD_CLKID_MST1 2 +#define AUD_CLKID_MST2 3 +#define AUD_CLKID_MST3 4 +#define AUD_CLKID_MST4 5 +#define AUD_CLKID_MST5 6 +#define AUD_CLKID_MST6 7 +#define AUD_CLKID_MST7 8 +#define AUD_CLKID_MST_A_MCLK_SEL 59 +#define AUD_CLKID_MST_B_MCLK_SEL 60 +#define AUD_CLKID_MST_C_MCLK_SEL 61 +#define AUD_CLKID_MST_D_MCLK_SEL 62 +#define AUD_CLKID_MST_E_MCLK_SEL 63 +#define AUD_CLKID_MST_F_MCLK_SEL 64 +#define AUD_CLKID_MST_A_MCLK_DIV 65 +#define AUD_CLKID_MST_B_MCLK_DIV 66 +#define AUD_CLKID_MST_C_MCLK_DIV 67 +#define AUD_CLKID_MST_D_MCLK_DIV 68 +#define AUD_CLKID_MST_E_MCLK_DIV 69 +#define AUD_CLKID_MST_F_MCLK_DIV 70 +#define AUD_CLKID_SPDIFOUT_CLK_SEL 71 +#define AUD_CLKID_SPDIFOUT_CLK_DIV 72 +#define AUD_CLKID_SPDIFIN_CLK_SEL 73 +#define AUD_CLKID_SPDIFIN_CLK_DIV 74 +#define AUD_CLKID_PDM_DCLK_SEL 75 +#define AUD_CLKID_PDM_DCLK_DIV 76 +#define AUD_CLKID_PDM_SYSCLK_SEL 77 +#define AUD_CLKID_PDM_SYSCLK_DIV 78 +#define AUD_CLKID_MST_A_SCLK_PRE_EN 92 +#define AUD_CLKID_MST_B_SCLK_PRE_EN 93 +#define AUD_CLKID_MST_C_SCLK_PRE_EN 94 +#define AUD_CLKID_MST_D_SCLK_PRE_EN 95 +#define AUD_CLKID_MST_E_SCLK_PRE_EN 96 +#define AUD_CLKID_MST_F_SCLK_PRE_EN 97 +#define AUD_CLKID_MST_A_SCLK_DIV 98 +#define AUD_CLKID_MST_B_SCLK_DIV 99 +#define AUD_CLKID_MST_C_SCLK_DIV 100 +#define AUD_CLKID_MST_D_SCLK_DIV 101 +#define AUD_CLKID_MST_E_SCLK_DIV 102 +#define AUD_CLKID_MST_F_SCLK_DIV 103 +#define AUD_CLKID_MST_A_SCLK_POST_EN 104 +#define AUD_CLKID_MST_B_SCLK_POST_EN 105 +#define AUD_CLKID_MST_C_SCLK_POST_EN 106 +#define AUD_CLKID_MST_D_SCLK_POST_EN 107 +#define AUD_CLKID_MST_E_SCLK_POST_EN 108 +#define AUD_CLKID_MST_F_SCLK_POST_EN 109 +#define AUD_CLKID_MST_A_LRCLK_DIV 110 +#define AUD_CLKID_MST_B_LRCLK_DIV 111 +#define AUD_CLKID_MST_C_LRCLK_DIV 112 +#define AUD_CLKID_MST_D_LRCLK_DIV 113 +#define AUD_CLKID_MST_E_LRCLK_DIV 114 +#define AUD_CLKID_MST_F_LRCLK_DIV 115 +#define AUD_CLKID_TDMIN_A_SCLK_PRE_EN 137 +#define AUD_CLKID_TDMIN_B_SCLK_PRE_EN 138 +#define AUD_CLKID_TDMIN_C_SCLK_PRE_EN 139 +#define AUD_CLKID_TDMIN_LB_SCLK_PRE_EN 140 +#define AUD_CLKID_TDMOUT_A_SCLK_PRE_EN 141 +#define AUD_CLKID_TDMOUT_B_SCLK_PRE_EN 142 +#define AUD_CLKID_TDMOUT_C_SCLK_PRE_EN 143 +#define AUD_CLKID_TDMIN_A_SCLK_POST_EN 144 +#define AUD_CLKID_TDMIN_B_SCLK_POST_EN 145 +#define AUD_CLKID_TDMIN_C_SCLK_POST_EN 146 +#define AUD_CLKID_TDMIN_LB_SCLK_POST_EN 147 +#define AUD_CLKID_TDMOUT_A_SCLK_POST_EN 148 +#define AUD_CLKID_TDMOUT_B_SCLK_POST_EN 149 +#define AUD_CLKID_TDMOUT_C_SCLK_POST_EN 150 + +/* include the CLKIDs which are part of the DT bindings */ +#include + +#define NR_CLKS 151 + +#endif /*__AXG_AUDIO_CLKC_H */ From 9799d5ae003c05f0db5d6c5884183a388b74ba3c Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Wed, 20 Jun 2018 12:06:09 +0200 Subject: [PATCH 20/27] clk: meson: stop rate propagation for audio clocks It is actually a lot easier to setup the PLL with carefully chosen rates than relying on CCF clock propagation for this audio use case. This way, we can make sure we will always be able to provide the common audio clock rates, while having the PLL in the optimal operating range. For this, we stop the rate propagation at the mux picking the PLL and let it round to the closest matching PLL. Doing so, we can use the generic divider for the i2s clock. clk-audio-divider is no longer required. It was a (poor) attempt to use CCF rate propagation while making sure the PLL rate would be high enough to work with audio use cases. Acked-by: Neil Armstrong Signed-off-by: Jerome Brunet --- drivers/clk/meson/gxbb.c | 16 +++++++--------- 1 file changed, 7 insertions(+), 9 deletions(-) diff --git a/drivers/clk/meson/gxbb.c b/drivers/clk/meson/gxbb.c index 297ebc3914750..894a6adaa17a9 100644 --- a/drivers/clk/meson/gxbb.c +++ b/drivers/clk/meson/gxbb.c @@ -970,28 +970,26 @@ static struct clk_regmap gxbb_cts_amclk_sel = { .mask = 0x3, .shift = 9, .table = (u32[]){ 1, 2, 3 }, + .flags = CLK_MUX_ROUND_CLOSEST, }, .hw.init = &(struct clk_init_data){ .name = "cts_amclk_sel", .ops = &clk_regmap_mux_ops, .parent_names = (const char *[]){ "mpll0", "mpll1", "mpll2" }, .num_parents = 3, - .flags = CLK_SET_RATE_PARENT, }, }; static struct clk_regmap gxbb_cts_amclk_div = { - .data = &(struct meson_clk_audio_div_data){ - .div = { - .reg_off = HHI_AUD_CLK_CNTL, - .shift = 0, - .width = 8, - }, + .data = &(struct clk_regmap_div_data) { + .offset = HHI_AUD_CLK_CNTL, + .shift = 0, + .width = 8, .flags = CLK_DIVIDER_ROUND_CLOSEST, }, .hw.init = &(struct clk_init_data){ .name = "cts_amclk_div", - .ops = &meson_clk_audio_divider_ops, + .ops = &clk_regmap_divider_ops, .parent_names = (const char *[]){ "cts_amclk_sel" }, .num_parents = 1, .flags = CLK_SET_RATE_PARENT, @@ -1018,13 +1016,13 @@ static struct clk_regmap gxbb_cts_mclk_i958_sel = { .mask = 0x3, .shift = 25, .table = (u32[]){ 1, 2, 3 }, + .flags = CLK_MUX_ROUND_CLOSEST, }, .hw.init = &(struct clk_init_data) { .name = "cts_mclk_i958_sel", .ops = &clk_regmap_mux_ops, .parent_names = (const char *[]){ "mpll0", "mpll1", "mpll2" }, .num_parents = 3, - .flags = CLK_SET_RATE_PARENT, }, }; From 85ddc1a32cace10bc8b7dc5dfae98b6a1785fc0c Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Wed, 20 Jun 2018 12:06:10 +0200 Subject: [PATCH 21/27] clk: meson: remove unused clk-audio-divider driver clk-audio-divider is no longer used, we can remove it. Acked-by: Neil Armstrong Signed-off-by: Jerome Brunet --- drivers/clk/meson/Makefile | 3 +- drivers/clk/meson/clk-audio-divider.c | 110 -------------------------- drivers/clk/meson/clkc.h | 7 -- 3 files changed, 1 insertion(+), 119 deletions(-) delete mode 100644 drivers/clk/meson/clk-audio-divider.c diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile index fd97f5ba317d0..72ec8c40d848d 100644 --- a/drivers/clk/meson/Makefile +++ b/drivers/clk/meson/Makefile @@ -2,8 +2,7 @@ # Makefile for Meson specific clk # -obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-pll.o clk-mpll.o clk-audio-divider.o -obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-phase.o +obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-pll.o clk-mpll.o clk-phase.o obj-$(CONFIG_COMMON_CLK_AMLOGIC_AUDIO) += clk-triphase.o sclk-div.o obj-$(CONFIG_COMMON_CLK_MESON_AO) += meson-aoclk.o obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o diff --git a/drivers/clk/meson/clk-audio-divider.c b/drivers/clk/meson/clk-audio-divider.c deleted file mode 100644 index e4cf96ba704ed..0000000000000 --- a/drivers/clk/meson/clk-audio-divider.c +++ /dev/null @@ -1,110 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright (c) 2017 AmLogic, Inc. - * Author: Jerome Brunet - */ - -/* - * i2s master clock divider: The algorithm of the generic clk-divider used with - * a very precise clock parent such as the mpll tends to select a low divider - * factor. This gives poor results with this particular divider, especially with - * high frequencies (> 100 MHz) - * - * This driver try to select the maximum possible divider with the rate the - * upstream clock can provide. - */ - -#include -#include "clkc.h" - -static inline struct meson_clk_audio_div_data * -meson_clk_audio_div_data(struct clk_regmap *clk) -{ - return (struct meson_clk_audio_div_data *)clk->data; -} - -static int _div_round(unsigned long parent_rate, unsigned long rate, - unsigned long flags) -{ - if (flags & CLK_DIVIDER_ROUND_CLOSEST) - return DIV_ROUND_CLOSEST_ULL((u64)parent_rate, rate); - - return DIV_ROUND_UP_ULL((u64)parent_rate, rate); -} - -static int _get_val(unsigned long parent_rate, unsigned long rate) -{ - return DIV_ROUND_UP_ULL((u64)parent_rate, rate) - 1; -} - -static int _valid_divider(unsigned int width, int divider) -{ - int max_divider = 1 << width; - - return clamp(divider, 1, max_divider); -} - -static unsigned long audio_divider_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) -{ - struct clk_regmap *clk = to_clk_regmap(hw); - struct meson_clk_audio_div_data *adiv = meson_clk_audio_div_data(clk); - unsigned long divider; - - divider = meson_parm_read(clk->map, &adiv->div) + 1; - - return DIV_ROUND_UP_ULL((u64)parent_rate, divider); -} - -static long audio_divider_round_rate(struct clk_hw *hw, - unsigned long rate, - unsigned long *parent_rate) -{ - struct clk_regmap *clk = to_clk_regmap(hw); - struct meson_clk_audio_div_data *adiv = meson_clk_audio_div_data(clk); - unsigned long max_prate; - int divider; - - if (!(clk_hw_get_flags(hw) & CLK_SET_RATE_PARENT)) { - divider = _div_round(*parent_rate, rate, adiv->flags); - divider = _valid_divider(adiv->div.width, divider); - return DIV_ROUND_UP_ULL((u64)*parent_rate, divider); - } - - /* Get the maximum parent rate */ - max_prate = clk_hw_round_rate(clk_hw_get_parent(hw), ULONG_MAX); - - /* Get the corresponding rounded down divider */ - divider = max_prate / rate; - divider = _valid_divider(adiv->div.width, divider); - - /* Get actual rate of the parent */ - *parent_rate = clk_hw_round_rate(clk_hw_get_parent(hw), - divider * rate); - - return DIV_ROUND_UP_ULL((u64)*parent_rate, divider); -} - -static int audio_divider_set_rate(struct clk_hw *hw, - unsigned long rate, - unsigned long parent_rate) -{ - struct clk_regmap *clk = to_clk_regmap(hw); - struct meson_clk_audio_div_data *adiv = meson_clk_audio_div_data(clk); - int val = _get_val(parent_rate, rate); - - meson_parm_write(clk->map, &adiv->div, val); - - return 0; -} - -const struct clk_ops meson_clk_audio_divider_ro_ops = { - .recalc_rate = audio_divider_recalc_rate, - .round_rate = audio_divider_round_rate, -}; - -const struct clk_ops meson_clk_audio_divider_ops = { - .recalc_rate = audio_divider_recalc_rate, - .round_rate = audio_divider_round_rate, - .set_rate = audio_divider_set_rate, -}; diff --git a/drivers/clk/meson/clkc.h b/drivers/clk/meson/clkc.h index fd520ccdd1be2..24cec16b60386 100644 --- a/drivers/clk/meson/clkc.h +++ b/drivers/clk/meson/clkc.h @@ -91,11 +91,6 @@ struct meson_clk_mpll_data { #define CLK_MESON_MPLL_ROUND_CLOSEST BIT(0) -struct meson_clk_audio_div_data { - struct parm div; - u8 flags; -}; - struct meson_clk_phase_data { struct parm ph; }; @@ -124,8 +119,6 @@ extern const struct clk_ops meson_clk_pll_ops; extern const struct clk_ops meson_clk_cpu_ops; extern const struct clk_ops meson_clk_mpll_ro_ops; extern const struct clk_ops meson_clk_mpll_ops; -extern const struct clk_ops meson_clk_audio_divider_ro_ops; -extern const struct clk_ops meson_clk_audio_divider_ops; extern const struct clk_ops meson_clk_phase_ops; #endif /* __CLKC_H */ From cddcb20b2bb36401e038d0ae41ba8a956d91f82e Mon Sep 17 00:00:00 2001 From: Yixun Lan Date: Mon, 2 Jul 2018 21:31:18 +0000 Subject: [PATCH 22/27] clk: meson-axg: add clocks required by pcie driver Adding clocks for the pcie driver. Due to the ASIC design, the pcie controller re-use part of the mipi clock logic, so the mipi clock is also added. Tested-by: Jianxin Qin Signed-off-by: Yixun Lan [amended to remove unnecessary locales] Signed-off-by: Jerome Brunet --- drivers/clk/meson/axg.c | 145 ++++++++++++++++++++++++++++++++++++++++ drivers/clk/meson/axg.h | 6 +- 2 files changed, 150 insertions(+), 1 deletion(-) diff --git a/drivers/clk/meson/axg.c b/drivers/clk/meson/axg.c index 3fb884db1b10f..2d458092884ae 100644 --- a/drivers/clk/meson/axg.c +++ b/drivers/clk/meson/axg.c @@ -625,6 +625,137 @@ static struct clk_regmap axg_mpll3 = { }, }; +static const struct pll_rate_table axg_pcie_pll_rate_table[] = { + { + .rate = 100000000, + .m = 200, + .n = 3, + .od = 1, + .od2 = 3, + }, + { /* sentinel */ }, +}; + +static const struct reg_sequence axg_pcie_init_regs[] = { + { .reg = HHI_PCIE_PLL_CNTL, .def = 0x400106c8 }, + { .reg = HHI_PCIE_PLL_CNTL1, .def = 0x0084a2aa }, + { .reg = HHI_PCIE_PLL_CNTL2, .def = 0xb75020be }, + { .reg = HHI_PCIE_PLL_CNTL3, .def = 0x0a47488e }, + { .reg = HHI_PCIE_PLL_CNTL4, .def = 0xc000004d }, + { .reg = HHI_PCIE_PLL_CNTL5, .def = 0x00078000 }, + { .reg = HHI_PCIE_PLL_CNTL6, .def = 0x002323c6 }, +}; + +static struct clk_regmap axg_pcie_pll = { + .data = &(struct meson_clk_pll_data){ + .m = { + .reg_off = HHI_PCIE_PLL_CNTL, + .shift = 0, + .width = 9, + }, + .n = { + .reg_off = HHI_PCIE_PLL_CNTL, + .shift = 9, + .width = 5, + }, + .od = { + .reg_off = HHI_PCIE_PLL_CNTL, + .shift = 16, + .width = 2, + }, + .od2 = { + .reg_off = HHI_PCIE_PLL_CNTL6, + .shift = 6, + .width = 2, + }, + .frac = { + .reg_off = HHI_PCIE_PLL_CNTL1, + .shift = 0, + .width = 12, + }, + .l = { + .reg_off = HHI_PCIE_PLL_CNTL, + .shift = 31, + .width = 1, + }, + .rst = { + .reg_off = HHI_PCIE_PLL_CNTL, + .shift = 29, + .width = 1, + }, + .table = axg_pcie_pll_rate_table, + .init_regs = axg_pcie_init_regs, + .init_count = ARRAY_SIZE(axg_pcie_init_regs), + }, + .hw.init = &(struct clk_init_data){ + .name = "pcie_pll", + .ops = &meson_clk_pll_ops, + .parent_names = (const char *[]){ "xtal" }, + .num_parents = 1, + }, +}; + +static struct clk_regmap axg_pcie_mux = { + .data = &(struct clk_regmap_mux_data){ + .offset = HHI_PCIE_PLL_CNTL6, + .mask = 0x1, + .shift = 2, + }, + .hw.init = &(struct clk_init_data){ + .name = "pcie_mux", + .ops = &clk_regmap_mux_ops, + .parent_names = (const char *[]){ "mpll3", "pcie_pll" }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap axg_pcie_ref = { + .data = &(struct clk_regmap_mux_data){ + .offset = HHI_PCIE_PLL_CNTL6, + .mask = 0x1, + .shift = 1, + /* skip the parent 0, reserved for debug */ + .table = (u32[]){ 1 }, + }, + .hw.init = &(struct clk_init_data){ + .name = "pcie_ref", + .ops = &clk_regmap_mux_ops, + .parent_names = (const char *[]){ "pcie_mux" }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap axg_pcie_cml_en0 = { + .data = &(struct clk_regmap_gate_data){ + .offset = HHI_PCIE_PLL_CNTL6, + .bit_idx = 4, + }, + .hw.init = &(struct clk_init_data) { + .name = "pcie_cml_en0", + .ops = &clk_regmap_gate_ops, + .parent_names = (const char *[]){ "pcie_ref" }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + + }, +}; + +static struct clk_regmap axg_pcie_cml_en1 = { + .data = &(struct clk_regmap_gate_data){ + .offset = HHI_PCIE_PLL_CNTL6, + .bit_idx = 3, + }, + .hw.init = &(struct clk_init_data) { + .name = "pcie_cml_en1", + .ops = &clk_regmap_gate_ops, + .parent_names = (const char *[]){ "pcie_ref" }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + static u32 mux_table_clk81[] = { 0, 2, 3, 4, 5, 6, 7 }; static const char * const clk81_parent_names[] = { "xtal", "fclk_div7", "mpll1", "mpll2", "fclk_div4", @@ -820,6 +951,7 @@ static MESON_GATE(axg_mmc_pclk, HHI_GCLK_MPEG2, 11); static MESON_GATE(axg_vpu_intr, HHI_GCLK_MPEG2, 25); static MESON_GATE(axg_sec_ahb_ahb3_bridge, HHI_GCLK_MPEG2, 26); static MESON_GATE(axg_gic, HHI_GCLK_MPEG2, 30); +static MESON_GATE(axg_mipi_enable, HHI_MIPI_CNTL0, 29); /* Always On (AO) domain gates */ @@ -909,6 +1041,13 @@ static struct clk_hw_onecell_data axg_hw_onecell_data = { [CLKID_FCLK_DIV4_DIV] = &axg_fclk_div4_div.hw, [CLKID_FCLK_DIV5_DIV] = &axg_fclk_div5_div.hw, [CLKID_FCLK_DIV7_DIV] = &axg_fclk_div7_div.hw, + [CLKID_PCIE_PLL] = &axg_pcie_pll.hw, + [CLKID_PCIE_MUX] = &axg_pcie_mux.hw, + [CLKID_PCIE_REF] = &axg_pcie_ref.hw, + [CLKID_PCIE_CML_EN0] = &axg_pcie_cml_en0.hw, + [CLKID_PCIE_CML_EN1] = &axg_pcie_cml_en1.hw, + [CLKID_MIPI_ENABLE] = &axg_mipi_enable.hw, + [NR_CLKS] = NULL, }, .num = NR_CLKS, @@ -987,6 +1126,12 @@ static struct clk_regmap *const axg_clk_regmaps[] = { &axg_fclk_div4, &axg_fclk_div5, &axg_fclk_div7, + &axg_pcie_pll, + &axg_pcie_mux, + &axg_pcie_ref, + &axg_pcie_cml_en0, + &axg_pcie_cml_en1, + &axg_mipi_enable, }; static const struct of_device_id clkc_match_table[] = { diff --git a/drivers/clk/meson/axg.h b/drivers/clk/meson/axg.h index b421df6a7ea0e..6e55ebd6c77d3 100644 --- a/drivers/clk/meson/axg.h +++ b/drivers/clk/meson/axg.h @@ -16,6 +16,7 @@ * Register offsets from the data sheet must be multiplied by 4 before * adding them to the base address to get the right value. */ +#define HHI_MIPI_CNTL0 0x00 #define HHI_GP0_PLL_CNTL 0x40 #define HHI_GP0_PLL_CNTL2 0x44 #define HHI_GP0_PLL_CNTL3 0x48 @@ -127,8 +128,11 @@ #define CLKID_FCLK_DIV4_DIV 73 #define CLKID_FCLK_DIV5_DIV 74 #define CLKID_FCLK_DIV7_DIV 75 +#define CLKID_PCIE_PLL 76 +#define CLKID_PCIE_MUX 77 +#define CLKID_PCIE_REF 78 -#define NR_CLKS 76 +#define NR_CLKS 82 /* include the CLKIDs that have been made part of the DT binding */ #include From 80d396b5118f448cb2206a509aba6917691a835e Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Wed, 4 Jul 2018 18:54:56 +0200 Subject: [PATCH 23/27] clk: meson: gxbb: remove HHI_GEN_CLK_CTNL duplicate definition HHI_GEN_CLK_CTNL is defined twice, just remove the duplicate definition Fixes: 738f66d3211d ("clk: gxbb: add AmLogic GXBB clk controller driver") Acked-by: Martin Blumenstingl Signed-off-by: Jerome Brunet --- drivers/clk/meson/gxbb.h | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/clk/meson/gxbb.h b/drivers/clk/meson/gxbb.h index ec1a812bf1fdf..df6c21d368c62 100644 --- a/drivers/clk/meson/gxbb.h +++ b/drivers/clk/meson/gxbb.h @@ -66,7 +66,6 @@ #define HHI_USB_CLK_CNTL 0x220 /* 0x88 offset in data sheet */ #define HHI_32K_CLK_CNTL 0x224 /* 0x89 offset in data sheet */ #define HHI_GEN_CLK_CNTL 0x228 /* 0x8a offset in data sheet */ -#define HHI_GEN_CLK_CNTL 0x228 /* 0x8a offset in data sheet */ #define HHI_PCM_CLK_CNTL 0x258 /* 0x96 offset in data sheet */ #define HHI_NAND_CLK_CNTL 0x25C /* 0x97 offset in data sheet */ From 7df533a7e3d2216e860ecf147ae8cee49bf133e9 Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Wed, 4 Jul 2018 18:54:58 +0200 Subject: [PATCH 24/27] clk: meson: add gen_clk GEN_CLK is able to route several internal clocks to one of the SoC pads. In the future, even more clocks could be made accessible using cts_msr_clk - the clock measure block. Signed-off-by: Jerome Brunet --- drivers/clk/meson/axg.c | 64 +++++++++++++++++++++++++++++++++++++- drivers/clk/meson/axg.h | 4 ++- drivers/clk/meson/gxbb.c | 66 ++++++++++++++++++++++++++++++++++++++++ drivers/clk/meson/gxbb.h | 4 ++- 4 files changed, 135 insertions(+), 3 deletions(-) diff --git a/drivers/clk/meson/axg.c b/drivers/clk/meson/axg.c index 2d458092884ae..00ce62ad6416c 100644 --- a/drivers/clk/meson/axg.c +++ b/drivers/clk/meson/axg.c @@ -909,6 +909,63 @@ static struct clk_regmap axg_sd_emmc_c_clk0 = { }, }; +static u32 mux_table_gen_clk[] = { 0, 4, 5, 6, 7, 8, + 9, 10, 11, 13, 14, }; +static const char * const gen_clk_parent_names[] = { + "xtal", "hifi_pll", "mpll0", "mpll1", "mpll2", "mpll3", + "fclk_div4", "fclk_div3", "fclk_div5", "fclk_div7", "gp0_pll", +}; + +static struct clk_regmap axg_gen_clk_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = HHI_GEN_CLK_CNTL, + .mask = 0xf, + .shift = 12, + .table = mux_table_gen_clk, + }, + .hw.init = &(struct clk_init_data){ + .name = "gen_clk_sel", + .ops = &clk_regmap_mux_ops, + /* + * bits 15:12 selects from 14 possible parents: + * xtal, [rtc_oscin_i], [sys_cpu_div16], [ddr_dpll_pt], + * hifi_pll, mpll0, mpll1, mpll2, mpll3, fdiv4, + * fdiv3, fdiv5, [cts_msr_clk], fdiv7, gp0_pll + */ + .parent_names = gen_clk_parent_names, + .num_parents = ARRAY_SIZE(gen_clk_parent_names), + }, +}; + +static struct clk_regmap axg_gen_clk_div = { + .data = &(struct clk_regmap_div_data){ + .offset = HHI_GEN_CLK_CNTL, + .shift = 0, + .width = 11, + }, + .hw.init = &(struct clk_init_data){ + .name = "gen_clk_div", + .ops = &clk_regmap_divider_ops, + .parent_names = (const char *[]){ "gen_clk_sel" }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap axg_gen_clk = { + .data = &(struct clk_regmap_gate_data){ + .offset = HHI_GEN_CLK_CNTL, + .bit_idx = 7, + }, + .hw.init = &(struct clk_init_data){ + .name = "gen_clk", + .ops = &clk_regmap_gate_ops, + .parent_names = (const char *[]){ "gen_clk_div" }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + /* Everything Else (EE) domain gates */ static MESON_GATE(axg_ddr, HHI_GCLK_MPEG0, 0); static MESON_GATE(axg_audio_locker, HHI_GCLK_MPEG0, 2); @@ -1047,7 +1104,9 @@ static struct clk_hw_onecell_data axg_hw_onecell_data = { [CLKID_PCIE_CML_EN0] = &axg_pcie_cml_en0.hw, [CLKID_PCIE_CML_EN1] = &axg_pcie_cml_en1.hw, [CLKID_MIPI_ENABLE] = &axg_mipi_enable.hw, - + [CLKID_GEN_CLK_SEL] = &axg_gen_clk_sel.hw, + [CLKID_GEN_CLK_DIV] = &axg_gen_clk_div.hw, + [CLKID_GEN_CLK] = &axg_gen_clk.hw, [NR_CLKS] = NULL, }, .num = NR_CLKS, @@ -1132,6 +1191,9 @@ static struct clk_regmap *const axg_clk_regmaps[] = { &axg_pcie_cml_en0, &axg_pcie_cml_en1, &axg_mipi_enable, + &axg_gen_clk_sel, + &axg_gen_clk_div, + &axg_gen_clk, }; static const struct of_device_id clkc_match_table[] = { diff --git a/drivers/clk/meson/axg.h b/drivers/clk/meson/axg.h index 6e55ebd6c77d3..1d04144a1b2cc 100644 --- a/drivers/clk/meson/axg.h +++ b/drivers/clk/meson/axg.h @@ -131,8 +131,10 @@ #define CLKID_PCIE_PLL 76 #define CLKID_PCIE_MUX 77 #define CLKID_PCIE_REF 78 +#define CLKID_GEN_CLK_SEL 82 +#define CLKID_GEN_CLK_DIV 83 -#define NR_CLKS 82 +#define NR_CLKS 85 /* include the CLKIDs that have been made part of the DT binding */ #include diff --git a/drivers/clk/meson/gxbb.c b/drivers/clk/meson/gxbb.c index 894a6adaa17a9..86d3ae58e84c2 100644 --- a/drivers/clk/meson/gxbb.c +++ b/drivers/clk/meson/gxbb.c @@ -1624,6 +1624,63 @@ static struct clk_regmap gxbb_vdec_hevc = { }, }; +static u32 mux_table_gen_clk[] = { 0, 4, 5, 6, 7, 8, + 9, 10, 11, 13, 14, }; +static const char * const gen_clk_parent_names[] = { + "xtal", "vdec_1", "vdec_hevc", "mpll0", "mpll1", "mpll2", + "fclk_div4", "fclk_div3", "fclk_div5", "fclk_div7", "gp0_pll", +}; + +static struct clk_regmap gxbb_gen_clk_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = HHI_GEN_CLK_CNTL, + .mask = 0xf, + .shift = 12, + .table = mux_table_gen_clk, + }, + .hw.init = &(struct clk_init_data){ + .name = "gen_clk_sel", + .ops = &clk_regmap_mux_ops, + /* + * bits 15:12 selects from 14 possible parents: + * xtal, [rtc_oscin_i], [sys_cpu_div16], [ddr_dpll_pt], + * vid_pll, vid2_pll (hevc), mpll0, mpll1, mpll2, fdiv4, + * fdiv3, fdiv5, [cts_msr_clk], fdiv7, gp0_pll + */ + .parent_names = gen_clk_parent_names, + .num_parents = ARRAY_SIZE(gen_clk_parent_names), + }, +}; + +static struct clk_regmap gxbb_gen_clk_div = { + .data = &(struct clk_regmap_div_data){ + .offset = HHI_GEN_CLK_CNTL, + .shift = 0, + .width = 11, + }, + .hw.init = &(struct clk_init_data){ + .name = "gen_clk_div", + .ops = &clk_regmap_divider_ops, + .parent_names = (const char *[]){ "gen_clk_sel" }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap gxbb_gen_clk = { + .data = &(struct clk_regmap_gate_data){ + .offset = HHI_GEN_CLK_CNTL, + .bit_idx = 7, + }, + .hw.init = &(struct clk_init_data){ + .name = "gen_clk", + .ops = &clk_regmap_gate_ops, + .parent_names = (const char *[]){ "gen_clk_div" }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + /* Everything Else (EE) domain gates */ static MESON_GATE(gxbb_ddr, HHI_GCLK_MPEG0, 0); static MESON_GATE(gxbb_dos, HHI_GCLK_MPEG0, 1); @@ -1873,6 +1930,9 @@ static struct clk_hw_onecell_data gxbb_hw_onecell_data = { [CLKID_VDEC_HEVC_SEL] = &gxbb_vdec_hevc_sel.hw, [CLKID_VDEC_HEVC_DIV] = &gxbb_vdec_hevc_div.hw, [CLKID_VDEC_HEVC] = &gxbb_vdec_hevc.hw, + [CLKID_GEN_CLK_SEL] = &gxbb_gen_clk_sel.hw, + [CLKID_GEN_CLK_DIV] = &gxbb_gen_clk_div.hw, + [CLKID_GEN_CLK] = &gxbb_gen_clk.hw, [NR_CLKS] = NULL, }, .num = NR_CLKS, @@ -2035,6 +2095,9 @@ static struct clk_hw_onecell_data gxl_hw_onecell_data = { [CLKID_VDEC_HEVC_SEL] = &gxbb_vdec_hevc_sel.hw, [CLKID_VDEC_HEVC_DIV] = &gxbb_vdec_hevc_div.hw, [CLKID_VDEC_HEVC] = &gxbb_vdec_hevc.hw, + [CLKID_GEN_CLK_SEL] = &gxbb_gen_clk_sel.hw, + [CLKID_GEN_CLK_DIV] = &gxbb_gen_clk_div.hw, + [CLKID_GEN_CLK] = &gxbb_gen_clk.hw, [NR_CLKS] = NULL, }, .num = NR_CLKS, @@ -2199,6 +2262,9 @@ static struct clk_regmap *const gx_clk_regmaps[] = { &gxbb_vdec_hevc_sel, &gxbb_vdec_hevc_div, &gxbb_vdec_hevc, + &gxbb_gen_clk_sel, + &gxbb_gen_clk_div, + &gxbb_gen_clk, }; struct clkc_data { diff --git a/drivers/clk/meson/gxbb.h b/drivers/clk/meson/gxbb.h index df6c21d368c62..20dfb1daf5b83 100644 --- a/drivers/clk/meson/gxbb.h +++ b/drivers/clk/meson/gxbb.h @@ -157,8 +157,10 @@ #define CLKID_VDEC_1_DIV 152 #define CLKID_VDEC_HEVC_SEL 154 #define CLKID_VDEC_HEVC_DIV 155 +#define CLKID_GEN_CLK_SEL 157 +#define CLKID_GEN_CLK_DIV 158 -#define NR_CLKS 157 +#define NR_CLKS 160 /* include the CLKIDs that have been made part of the DT binding */ #include From 66c7bb7c4133c5cc4e9962d5951bf3bd65e29120 Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Tue, 19 Jun 2018 14:34:46 +0200 Subject: [PATCH 25/27] clk: mvebu: armada-37xx-periph: switch to SPDX license identifier Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Gregory CLEMENT Signed-off-by: Stephen Boyd --- drivers/clk/mvebu/armada-37xx-periph.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/clk/mvebu/armada-37xx-periph.c b/drivers/clk/mvebu/armada-37xx-periph.c index 6860bd5a37c5e..c179eff6a7e9d 100644 --- a/drivers/clk/mvebu/armada-37xx-periph.c +++ b/drivers/clk/mvebu/armada-37xx-periph.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0+ /* * Marvell Armada 37xx SoC Peripheral clocks * @@ -5,10 +6,6 @@ * * Gregory CLEMENT * - * This file is licensed under the terms of the GNU General Public - * License version 2 or later. This program is licensed "as is" - * without any warranty of any kind, whether express or implied. - * * Most of the peripheral clocks can be modelled like this: * _____ _______ _______ * TBG-A-P --| | | | | | ______ From 30343897d8fd84c630ee2c7f5b38c16da2c7ee4b Mon Sep 17 00:00:00 2001 From: Oleksij Rempel Date: Fri, 15 Jun 2018 11:51:04 +0200 Subject: [PATCH 26/27] clk: imx7d: add IMX7D_MU_ROOT_CLK This clock is needed for iMX mailbox driver Signed-off-by: Oleksij Rempel Reviewed-by: Dong Aisheng Reviewed-by: Fabio Estevam Signed-off-by: Stephen Boyd --- drivers/clk/imx/clk-imx7d.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/clk/imx/clk-imx7d.c b/drivers/clk/imx/clk-imx7d.c index 27217a7ea17e1..881b772c4ac97 100644 --- a/drivers/clk/imx/clk-imx7d.c +++ b/drivers/clk/imx/clk-imx7d.c @@ -797,6 +797,7 @@ static void __init imx7d_clocks_init(struct device_node *ccm_node) clks[IMX7D_DRAM_ALT_ROOT_CLK] = imx_clk_gate4("dram_alt_root_clk", "dram_alt_post_div", base + 0x4130, 0); clks[IMX7D_OCOTP_CLK] = imx_clk_gate4("ocotp_clk", "ipg_root_clk", base + 0x4230, 0); clks[IMX7D_SNVS_CLK] = imx_clk_gate4("snvs_clk", "ipg_root_clk", base + 0x4250, 0); + clks[IMX7D_MU_ROOT_CLK] = imx_clk_gate4("mu_root_clk", "ipg_root_clk", base + 0x4270, 0); clks[IMX7D_CAAM_CLK] = imx_clk_gate4("caam_clk", "ipg_root_clk", base + 0x4240, 0); clks[IMX7D_USB_HSIC_ROOT_CLK] = imx_clk_gate4("usb_hsic_root_clk", "usb_hsic_post_div", base + 0x4690, 0); clks[IMX7D_SDMA_CORE_CLK] = imx_clk_gate4("sdma_root_clk", "ahb_root_clk", base + 0x4480, 0); From 640332d1a089909df08bc9f3e42888a2019c66e2 Mon Sep 17 00:00:00 2001 From: Levin Du Date: Sat, 4 Aug 2018 15:31:02 +0800 Subject: [PATCH 27/27] clk: rockchip: Add pclk_rkpwm_pmu to PMU critical clocks in rk3399 PWM2 is commonly used to control voltage of PWM regulator of VDD_LOG in RK3399. On the Firefly-RK3399 board, PWM2 outputs 40 KHz square wave from power on and the VDD_LOG is about 0.9V. When the kernel boots normally into the system, the PWM2 keeps outputing PWM signal. But the kernel hangs randomly after "Starting kernel ..." line on that board. When it happens, PWM2 outputs high level which causes VDD_LOG drops to 0.4V below the normal operating voltage. By adding "pclk_rkpwm_pmu" to the rk3399_pmucru_critical_clocks array, PWM clock is ensured to be prepared at startup and the PWM2 output is normal. After repeated tests, the early boot hang is gone. This patch works on both Firefly-RK3399 and ROC-RK3399-PC boards. Signed-off-by: Levin Du Signed-off-by: Heiko Stuebner --- drivers/clk/rockchip/clk-rk3399.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/clk/rockchip/clk-rk3399.c b/drivers/clk/rockchip/clk-rk3399.c index 2a8634a52856e..5a628148f3f02 100644 --- a/drivers/clk/rockchip/clk-rk3399.c +++ b/drivers/clk/rockchip/clk-rk3399.c @@ -1523,6 +1523,7 @@ static const char *const rk3399_pmucru_critical_clocks[] __initconst = { "pclk_pmu_src", "fclk_cm0s_src_pmu", "clk_timer_src_pmu", + "pclk_rkpwm_pmu", }; static void __init rk3399_clk_init(struct device_node *np)