diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 4ef16aabc30a6..c5287a1818f36 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -7507,6 +7507,22 @@ enum skl_disp_power_wells {
 
 #define _MIPI_PORT(port, a, c)	_PORT3(port, a, 0, c)	/* ports A and C only */
 
+/* BXT MIPI mode configure */
+#define  _BXT_MIPIA_TRANS_HACTIVE			0x6B0F8
+#define  _BXT_MIPIC_TRANS_HACTIVE			0x6B8F8
+#define  BXT_MIPI_TRANS_HACTIVE(tc)	_MIPI_PORT(tc, \
+		_BXT_MIPIA_TRANS_HACTIVE, _BXT_MIPIC_TRANS_HACTIVE)
+
+#define  _BXT_MIPIA_TRANS_VACTIVE			0x6B0FC
+#define  _BXT_MIPIC_TRANS_VACTIVE			0x6B8FC
+#define  BXT_MIPI_TRANS_VACTIVE(tc)	_MIPI_PORT(tc, \
+		_BXT_MIPIA_TRANS_VACTIVE, _BXT_MIPIC_TRANS_VACTIVE)
+
+#define  _BXT_MIPIA_TRANS_VTOTAL			0x6B100
+#define  _BXT_MIPIC_TRANS_VTOTAL			0x6B900
+#define  BXT_MIPI_TRANS_VTOTAL(tc)	_MIPI_PORT(tc, \
+		_BXT_MIPIA_TRANS_VTOTAL, _BXT_MIPIC_TRANS_VTOTAL)
+
 #define BXT_DSI_PLL_CTL			0x161000
 #define  BXT_DSI_PLL_PVD_RATIO_SHIFT	16
 #define  BXT_DSI_PLL_PVD_RATIO_MASK	(3 << BXT_DSI_PLL_PVD_RATIO_SHIFT)
@@ -7942,6 +7958,11 @@ enum skl_disp_power_wells {
 #define  READ_REQUEST_PRIORITY_HIGH			(3 << 3)
 #define  RGB_FLIP_TO_BGR				(1 << 2)
 
+#define  BXT_PIPE_SELECT_MASK				(7 << 7)
+#define  BXT_PIPE_SELECT_C				(2 << 7)
+#define  BXT_PIPE_SELECT_B				(1 << 7)
+#define  BXT_PIPE_SELECT_A				(0 << 7)
+
 #define _MIPIA_DATA_ADDRESS		(dev_priv->mipi_mmio_base + 0xb108)
 #define _MIPIC_DATA_ADDRESS		(dev_priv->mipi_mmio_base + 0xb908)
 #define MIPI_DATA_ADDRESS(port)		_MIPI_PORT(port, _MIPIA_DATA_ADDRESS, \
diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c
index 50159a99d58a4..5b69b41262823 100644
--- a/drivers/gpu/drm/i915/intel_dsi.c
+++ b/drivers/gpu/drm/i915/intel_dsi.c
@@ -737,6 +737,21 @@ static void set_dsi_timings(struct drm_encoder *encoder,
 	hbp = txbyteclkhs(hbp, bpp, lane_count, intel_dsi->burst_mode_ratio);
 
 	for_each_dsi_port(port, intel_dsi->ports) {
+		if (IS_BROXTON(dev)) {
+			/*
+			 * Program hdisplay and vdisplay on MIPI transcoder.
+			 * This is different from calculated hactive and
+			 * vactive, as they are calculated per channel basis,
+			 * whereas these values should be based on resolution.
+			 */
+			I915_WRITE(BXT_MIPI_TRANS_HACTIVE(port),
+					mode->hdisplay);
+			I915_WRITE(BXT_MIPI_TRANS_VACTIVE(port),
+					mode->vdisplay);
+			I915_WRITE(BXT_MIPI_TRANS_VTOTAL(port),
+					mode->vtotal);
+		}
+
 		I915_WRITE(MIPI_HACTIVE_AREA_COUNT(port), hactive);
 		I915_WRITE(MIPI_HFP_COUNT(port), hfp);
 
@@ -777,16 +792,39 @@ static void intel_dsi_prepare(struct intel_encoder *intel_encoder)
 	}
 
 	for_each_dsi_port(port, intel_dsi->ports) {
-		/* escape clock divider, 20MHz, shared for A and C.
-		 * device ready must be off when doing this! txclkesc? */
-		tmp = I915_READ(MIPI_CTRL(PORT_A));
-		tmp &= ~ESCAPE_CLOCK_DIVIDER_MASK;
-		I915_WRITE(MIPI_CTRL(PORT_A), tmp | ESCAPE_CLOCK_DIVIDER_1);
-
-		/* read request priority is per pipe */
-		tmp = I915_READ(MIPI_CTRL(port));
-		tmp &= ~READ_REQUEST_PRIORITY_MASK;
-		I915_WRITE(MIPI_CTRL(port), tmp | READ_REQUEST_PRIORITY_HIGH);
+		if (IS_VALLEYVIEW(dev)) {
+			/*
+			 * escape clock divider, 20MHz, shared for A and C.
+			 * device ready must be off when doing this! txclkesc?
+			 */
+			tmp = I915_READ(MIPI_CTRL(PORT_A));
+			tmp &= ~ESCAPE_CLOCK_DIVIDER_MASK;
+			I915_WRITE(MIPI_CTRL(PORT_A), tmp |
+					ESCAPE_CLOCK_DIVIDER_1);
+
+			/* read request priority is per pipe */
+			tmp = I915_READ(MIPI_CTRL(port));
+			tmp &= ~READ_REQUEST_PRIORITY_MASK;
+			I915_WRITE(MIPI_CTRL(port), tmp |
+					READ_REQUEST_PRIORITY_HIGH);
+		} else if (IS_BROXTON(dev)) {
+			/*
+			 * FIXME:
+			 * BXT can connect any PIPE to any MIPI port.
+			 * Select the pipe based on the MIPI port read from
+			 * VBT for now. Pick PIPE A for MIPI port A and C
+			 * for port C.
+			 */
+			tmp = I915_READ(MIPI_CTRL(port));
+			tmp &= ~BXT_PIPE_SELECT_MASK;
+
+			if (port == PORT_A)
+				tmp |= BXT_PIPE_SELECT_A;
+			else if (port == PORT_C)
+				tmp |= BXT_PIPE_SELECT_C;
+
+			I915_WRITE(MIPI_CTRL(port), tmp);
+		}
 
 		/* XXX: why here, why like this? handling in irq handler?! */
 		I915_WRITE(MIPI_INTR_STAT(port), 0xffffffff);
@@ -863,6 +901,17 @@ static void intel_dsi_prepare(struct intel_encoder *intel_encoder)
 		I915_WRITE(MIPI_INIT_COUNT(port),
 				txclkesc(intel_dsi->escape_clk_div, 100));
 
+		if (IS_BROXTON(dev) && (!intel_dsi->dual_link)) {
+			/*
+			 * BXT spec says write MIPI_INIT_COUNT for
+			 * both the ports, even if only one is
+			 * getting used. So write the other port
+			 * if not in dual link mode.
+			 */
+			I915_WRITE(MIPI_INIT_COUNT(port ==
+						PORT_A ? PORT_C : PORT_A),
+					intel_dsi->init_count);
+		}
 
 		/* recovery disables */
 		I915_WRITE(MIPI_EOT_DISABLE(port), tmp);