From 08f0fa5d6aa9488f752eb5410e32636f143b3d8e Mon Sep 17 00:00:00 2001
From: Joao Paulo Goncalves <joao.goncalves@toradex.com>
Date: Tue, 7 May 2024 11:35:55 -0300
Subject: [PATCH 1/7] arm64: dts: freescale: imx8mm-verdin: Fix GPU speed
The GPU clock was reduced on iMX8MM SOC device tree to prevent boards
that don't support GPU overdrive from being out of specification. However,
this caused a regression in GPU speed for the Verdin iMX8MM, which does
support GPU overdrive. This patch fixes this by enabling overdrive mode
in the SOM dtsi.
Fixes: 1f794d3eed53 ("arm64: dts: imx8mm: Reduce GPU to nominal speed")
Signed-off-by: Joao Paulo Goncalves <joao.goncalves@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---
arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
index 4768b05fd7659..0d9abca588218 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
@@ -6,6 +6,7 @@
#include <dt-bindings/phy/phy-imx8-pcie.h>
#include <dt-bindings/pwm/pwm.h>
#include "imx8mm.dtsi"
+#include "imx8mm-overdrive.dtsi"
/ {
chosen {
From c03984d43a9dd9282da54ccf275419f666029452 Mon Sep 17 00:00:00 2001
From: Marek Vasut <marex@denx.de>
Date: Sat, 15 Jun 2024 16:00:43 +0800
Subject: [PATCH 2/7] arm64: dts: imx8mp: Fix TC9595 input clock on DH i.MX8M
Plus DHCOM SoM
The IMX8MP_CLK_CLKOUT2 supplies the TC9595 bridge with 13 MHz reference
clock. The IMX8MP_CLK_CLKOUT2 is supplied from IMX8MP_AUDIO_PLL2_OUT.
The IMX8MP_CLK_CLKOUT2 operates only as a power-of-two divider, and the
current 156 MHz is not power-of-two divisible to achieve 13 MHz.
To achieve 13 MHz output from IMX8MP_CLK_CLKOUT2, set IMX8MP_AUDIO_PLL2_OUT
to 208 MHz, because 208 MHz / 16 = 13 MHz.
Fixes: 20d0b83e712b ("arm64: dts: imx8mp: Add TC9595 bridge on DH electronics i.MX8M Plus DHCOM")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---
arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
index 43f1d45ccc96f..f5115f9e8c473 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
@@ -254,7 +254,7 @@
<&clk IMX8MP_CLK_CLKOUT2>,
<&clk IMX8MP_AUDIO_PLL2_OUT>;
assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL2_OUT>;
- assigned-clock-rates = <13000000>, <13000000>, <156000000>;
+ assigned-clock-rates = <13000000>, <13000000>, <208000000>;
reset-gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>;
status = "disabled";
From bcdea3e81ea51c9e89e3b11aac2612e1b4330bee Mon Sep 17 00:00:00 2001
From: Liu Ying <victor.liu@nxp.com>
Date: Tue, 14 May 2024 11:07:18 +0800
Subject: [PATCH 3/7] arm: dts: imx53-qsb-hdmi: Disable panel instead of
deleting node
We cannot use /delete-node/ directive to delete a node in a DT
overlay. The node won't be deleted effectively. Instead, set
the node's status property to "disabled" to achieve something
similar.
Fixes: eeb403df953f ("ARM: dts: imx53-qsb: add support for the HDMI expander")
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---
arch/arm/boot/dts/nxp/imx/imx53-qsb-common.dtsi | 2 +-
arch/arm/boot/dts/nxp/imx/imx53-qsb-hdmi.dtso | 6 ++++--
2 files changed, 5 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-qsb-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx53-qsb-common.dtsi
index d804404464737..05d7a462ea25a 100644
--- a/arch/arm/boot/dts/nxp/imx/imx53-qsb-common.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx53-qsb-common.dtsi
@@ -85,7 +85,7 @@
};
};
- panel {
+ panel_dpi: panel {
compatible = "sii,43wvf1g";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_display_power>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-qsb-hdmi.dtso b/arch/arm/boot/dts/nxp/imx/imx53-qsb-hdmi.dtso
index c84e9b0525276..151e9cee3c87e 100644
--- a/arch/arm/boot/dts/nxp/imx/imx53-qsb-hdmi.dtso
+++ b/arch/arm/boot/dts/nxp/imx/imx53-qsb-hdmi.dtso
@@ -10,8 +10,6 @@
/plugin/;
&{/} {
- /delete-node/ panel;
-
hdmi: connector-hdmi {
compatible = "hdmi-connector";
label = "hdmi";
@@ -82,6 +80,10 @@
};
};
+&panel_dpi {
+ status = "disabled";
+};
+
&tve {
status = "disabled";
};
From e1b4622efbe7ad09c9a902365a993f68c270c453 Mon Sep 17 00:00:00 2001
From: Tim Harvey <tharvey@gateworks.com>
Date: Wed, 22 May 2024 14:38:28 -0700
Subject: [PATCH 4/7] arm64: dts: freescale: imx8mp-venice-gw73xx-2x: fix BT
shutdown GPIO
Fix the invalid BT shutdown GPIO (gpio1_io3 not gpio4_io16)
Fixes: 716ced308234 ("arm64: dts: freescale: Add imx8mp-venice-gw73xx-2x")
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---
arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi
index dec57fad68285..e2b5e7ac3e465 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi
@@ -219,7 +219,7 @@
bluetooth {
compatible = "brcm,bcm4330-bt";
- shutdown-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+ shutdown-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
};
};
From a5d400b6439ac734a5c0dbb641e26a38736abc17 Mon Sep 17 00:00:00 2001
From: Fabio Estevam <festevam@gmail.com>
Date: Wed, 29 May 2024 00:48:54 -0300
Subject: [PATCH 5/7] arm64: dts: imx93-11x11-evk: Remove the 'no-sdio'
property
The usdhc2 port is connected to the microSD slot. The presence of the
'no-sdio' property prevents Wifi SDIO cards, such as CMP9010-X-EVB [1]
to be detected.
Remove the 'no-sdio' property so that SDIO cards could also work.
[1] https://www.nxp.com/products/wireless-connectivity/wi-fi-plus-bluetooth-plus-802-15-4/cmp9010-x-evb-iw416-usd-interface-evaluation-board:CMP9010-X-EVB
Fixes: e37907bd8294 ("arm64: dts: freescale: add i.MX93 11x11 EVK basic support")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---
arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
index d400d85f42a92..bd98eff4d685f 100644
--- a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
@@ -296,7 +296,6 @@
vmmc-supply = <®_usdhc2_vmmc>;
bus-width = <4>;
status = "okay";
- no-sdio;
no-mmc;
};
From 67cc6125fb39902169707cb6277f010e56d4a40a Mon Sep 17 00:00:00 2001
From: Max Krummenacher <max.krummenacher@toradex.com>
Date: Mon, 3 Jun 2024 16:00:45 +0200
Subject: [PATCH 6/7] arm64: dts: freescale: imx8mm-verdin: enable hysteresis
on slow input pin
SODIMM 17 can be used as an edge triggered interrupt supplied from an
off board source.
Enable hysteresis on the pinmuxing to increase immunity against noise
on the signal.
Fixes: 60f01b5b5c7d ("arm64: dts: imx8mm-verdin: update iomux configuration")
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---
arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
index 0d9abca588218..98544741ce176 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
@@ -936,7 +936,7 @@
/* Verdin GPIO_9_DSI (pulled-up as active-low) */
pinctrl_gpio_9_dsi: gpio9dsigrp {
fsl,pins =
- <MX8MM_IOMUXC_NAND_RE_B_GPIO3_IO15 0x146>; /* SODIMM 17 */
+ <MX8MM_IOMUXC_NAND_RE_B_GPIO3_IO15 0x1c6>; /* SODIMM 17 */
};
/* Verdin GPIO_10_DSI (pulled-up as active-low) */
From dfd239a039b3581ca25f932e66b6e2c2bf77c798 Mon Sep 17 00:00:00 2001
From: Frank Li <Frank.Li@nxp.com>
Date: Fri, 14 Jun 2024 11:06:32 -0400
Subject: [PATCH 7/7] arm64: dts: imx8qm-mek: fix gpio number for
reg_usdhc2_vmmc
The gpio in "reg_usdhc2_vmmc" should be 7 instead of 19.
Cc: stable@vger.kernel.org
Fixes: 307fd14d4b14 ("arm64: dts: imx: add imx8qm mek support")
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---
arch/arm64/boot/dts/freescale/imx8qm-mek.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
index 5c6b39c6933fc..6e05361c1ffb2 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
@@ -36,7 +36,7 @@
regulator-name = "SD1_SPWR";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
- gpio = <&lsio_gpio4 19 GPIO_ACTIVE_HIGH>;
+ gpio = <&lsio_gpio4 7 GPIO_ACTIVE_HIGH>;
enable-active-high;
};