From b4bc9f9e27edd8de76d44675c8f0c6c2ccb6b22c Mon Sep 17 00:00:00 2001
From: "H. Nikolaus Schaller" <hns@goldelico.com>
Date: Wed, 11 Sep 2019 19:47:07 +0200
Subject: [PATCH 01/18] cpufreq: ti-cpufreq: add support for omap34xx and
 omap36xx

This adds code and tables to read the silicon revision and
eFuse (speed binned / 720 MHz grade) bits for selecting
opp-v2 table entries.

Since these bits are not always part of the syscon register
range (like for am33xx, am43, dra7), we add code to directly
read the register values using ioremap() if syscon access fails.

The format of the opp-supported-hw entries is that it has
two 32 bit bitfields. E.g.:

	opp-supported-hw = <0xffffffff 3>

The first value is matched against the bit position of the
silicon revision which is (see TRM)

omap34xx:
BIT(0)	ES1.0
BIT(1)	ES2.0
BIT(2)	ES2.1
BIT(3)	ES3.0
BIT(4)	ES3.1
BIT(7)	ES3.1.2

omap36xx:
BIT(0)	ES1.0
BIT(1)	ES1.1
BIT(2)	ES1.2

The second value is matched against the speed grade eFuse:

BIT(0)	no high speed OPP
BIT(1)	high speed OPP

This means for the example above that it is always enabled
while e.g.

	opp-supported-hw = <0x1 2>

enables the OPP only for ES1.0 BIT(0) and if the high speed
eFuse is set BIT(1).

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Tested-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 drivers/cpufreq/ti-cpufreq.c | 91 +++++++++++++++++++++++++++++++++++-
 1 file changed, 89 insertions(+), 2 deletions(-)

diff --git a/drivers/cpufreq/ti-cpufreq.c b/drivers/cpufreq/ti-cpufreq.c
index aeaa883a8c9d5..13d426559333e 100644
--- a/drivers/cpufreq/ti-cpufreq.c
+++ b/drivers/cpufreq/ti-cpufreq.c
@@ -31,6 +31,11 @@
 #define DRA7_EFUSE_OD_MPU_OPP			BIT(1)
 #define DRA7_EFUSE_HIGH_MPU_OPP			BIT(2)
 
+#define OMAP3_CONTROL_DEVICE_STATUS		0x4800244C
+#define OMAP3_CONTROL_IDCODE			0x4830A204
+#define OMAP34xx_ProdID_SKUID			0x4830A20C
+#define OMAP3_SYSCON_BASE	(0x48000000 + 0x2000 + 0x270)
+
 #define VERSION_COUNT				2
 
 struct ti_cpufreq_data;
@@ -85,6 +90,13 @@ static unsigned long dra7_efuse_xlate(struct ti_cpufreq_data *opp_data,
 	return calculated_efuse;
 }
 
+static unsigned long omap3_efuse_xlate(struct ti_cpufreq_data *opp_data,
+				      unsigned long efuse)
+{
+	/* OPP enable bit ("Speed Binned") */
+	return BIT(efuse);
+}
+
 static struct ti_cpufreq_soc_data am3x_soc_data = {
 	.efuse_xlate = amx3_efuse_xlate,
 	.efuse_fallback = AM33XX_800M_ARM_MPU_MAX_FREQ,
@@ -112,6 +124,56 @@ static struct ti_cpufreq_soc_data dra7_soc_data = {
 	.multi_regulator = true,
 };
 
+/*
+ * OMAP35x TRM (SPRUF98K):
+ *  CONTROL_IDCODE (0x4830 A204) describes Silicon revisions.
+ *  Control OMAP Status Register 15:0 (Address 0x4800 244C)
+ *    to separate between omap3503, omap3515, omap3525, omap3530
+ *    and feature presence.
+ *    There are encodings for versions limited to 400/266MHz
+ *    but we ignore.
+ *    Not clear if this also holds for omap34xx.
+ *  some eFuse values e.g. CONTROL_FUSE_OPP1_VDD1
+ *    are stored in the SYSCON register range
+ *  Register 0x4830A20C [ProdID.SKUID] [0:3]
+ *    0x0 for normal 600/430MHz device.
+ *    0x8 for 720/520MHz device.
+ *    Not clear what omap34xx value is.
+ */
+
+static struct ti_cpufreq_soc_data omap34xx_soc_data = {
+	.efuse_xlate = omap3_efuse_xlate,
+	.efuse_offset = OMAP34xx_ProdID_SKUID - OMAP3_SYSCON_BASE,
+	.efuse_shift = 3,
+	.efuse_mask = BIT(3),
+	.rev_offset = OMAP3_CONTROL_IDCODE - OMAP3_SYSCON_BASE,
+	.multi_regulator = false,
+};
+
+/*
+ * AM/DM37x TRM (SPRUGN4M)
+ *  CONTROL_IDCODE (0x4830 A204) describes Silicon revisions.
+ *  Control Device Status Register 15:0 (Address 0x4800 244C)
+ *    to separate between am3703, am3715, dm3725, dm3730
+ *    and feature presence.
+ *   Speed Binned = Bit 9
+ *     0 800/600 MHz
+ *     1 1000/800 MHz
+ *  some eFuse values e.g. CONTROL_FUSE_OPP 1G_VDD1
+ *    are stored in the SYSCON register range.
+ *  There is no 0x4830A20C [ProdID.SKUID] register (exists but
+ *    seems to always read as 0).
+ */
+
+static struct ti_cpufreq_soc_data omap36xx_soc_data = {
+	.efuse_xlate = omap3_efuse_xlate,
+	.efuse_offset = OMAP3_CONTROL_DEVICE_STATUS - OMAP3_SYSCON_BASE,
+	.efuse_shift = 9,
+	.efuse_mask = BIT(9),
+	.rev_offset = OMAP3_CONTROL_IDCODE - OMAP3_SYSCON_BASE,
+	.multi_regulator = false,
+};
+
 /**
  * ti_cpufreq_get_efuse() - Parse and return efuse value present on SoC
  * @opp_data: pointer to ti_cpufreq_data context
@@ -128,7 +190,17 @@ static int ti_cpufreq_get_efuse(struct ti_cpufreq_data *opp_data,
 
 	ret = regmap_read(opp_data->syscon, opp_data->soc_data->efuse_offset,
 			  &efuse);
-	if (ret) {
+	if (ret == -EIO) {
+		/* not a syscon register! */
+		void __iomem *regs = ioremap(OMAP3_SYSCON_BASE +
+				opp_data->soc_data->efuse_offset, 4);
+
+		if (!regs)
+			return -ENOMEM;
+		efuse = readl(regs);
+		iounmap(regs);
+		}
+	else if (ret) {
 		dev_err(dev,
 			"Failed to read the efuse value from syscon: %d\n",
 			ret);
@@ -159,7 +231,17 @@ static int ti_cpufreq_get_rev(struct ti_cpufreq_data *opp_data,
 
 	ret = regmap_read(opp_data->syscon, opp_data->soc_data->rev_offset,
 			  &revision);
-	if (ret) {
+	if (ret == -EIO) {
+		/* not a syscon register! */
+		void __iomem *regs = ioremap(OMAP3_SYSCON_BASE +
+				opp_data->soc_data->rev_offset, 4);
+
+		if (!regs)
+			return -ENOMEM;
+		revision = readl(regs);
+		iounmap(regs);
+		}
+	else if (ret) {
 		dev_err(dev,
 			"Failed to read the revision number from syscon: %d\n",
 			ret);
@@ -191,6 +273,11 @@ static const struct of_device_id ti_cpufreq_of_match[] = {
 	{ .compatible = "ti,am33xx", .data = &am3x_soc_data, },
 	{ .compatible = "ti,am43", .data = &am4x_soc_data, },
 	{ .compatible = "ti,dra7", .data = &dra7_soc_data },
+	{ .compatible = "ti,omap34xx", .data = &omap34xx_soc_data, },
+	{ .compatible = "ti,omap36xx", .data = &omap36xx_soc_data, },
+	/* legacy */
+	{ .compatible = "ti,omap3430", .data = &omap34xx_soc_data, },
+	{ .compatible = "ti,omap3630", .data = &omap36xx_soc_data, },
 	{},
 };
 

From b7dbe349e1eb5a1c07b58da83d8ee60030682a3a Mon Sep 17 00:00:00 2001
From: "H. Nikolaus Schaller" <hns@goldelico.com>
Date: Wed, 11 Sep 2019 19:47:08 +0200
Subject: [PATCH 02/18] ARM: dts: omap34xx & omap36xx: replace opp-v1 tables by
 opp-v2 for

With the driver installed, we can change the opp-v1 table format
to opp-v2.

In addition, move omap3 from whitelist to blacklist in cpufreq-dt-platdev
in the same patch, because doing either first breaks operation and
may make trouble in bisect.

We also can remove opp-v1 table for omap3-n950-n9 since its 1GHz
capability is now automatically detected.

We also fix a wrong OPP4 voltage for omap3430 which must be
0.6V + 54*12.5mV = 1275mV. Otherwise the twl4030 driver will reject
this OPP.

Note: the high speed OPPs that were not available in the opp-v1 tables
are tagged "turbo-mode;" which means they are not automatically
activated by the govenors or cpu-freq.

To enable you have to write

echo 1 >/sys/devices/system/cpu/cpufreq/boost

Note: to hard disable an OPP in a board.dts file use e.g.

&cpu0_opp_table: {
	/delete-node/ opp1g-1000000000;	/* do not use */
};

or alternatively:

&cpu0_opp_table: {
	opp1g-1000000000 {
		status = "disabled";	/* do not use */
	};
};

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Tested-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 arch/arm/boot/dts/omap3-n950-n9.dtsi |  7 ---
 arch/arm/boot/dts/omap34xx.dtsi      | 66 ++++++++++++++++++++++++----
 arch/arm/boot/dts/omap36xx.dtsi      | 54 +++++++++++++++++++----
 drivers/cpufreq/cpufreq-dt-platdev.c |  2 +-
 4 files changed, 104 insertions(+), 25 deletions(-)

diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi
index 6681d4519e97f..a075b63f3087d 100644
--- a/arch/arm/boot/dts/omap3-n950-n9.dtsi
+++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi
@@ -11,13 +11,6 @@
 	cpus {
 		cpu@0 {
 			cpu0-supply = <&vcc>;
-			operating-points = <
-				/* kHz    uV */
-				300000  1012500
-				600000  1200000
-				800000  1325000
-				1000000	1375000
-			>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi
index 7b09cbee8bb8b..c4dd9801840d6 100644
--- a/arch/arm/boot/dts/omap34xx.dtsi
+++ b/arch/arm/boot/dts/omap34xx.dtsi
@@ -16,19 +16,67 @@
 / {
 	cpus {
 		cpu: cpu@0 {
-			/* OMAP343x/OMAP35xx variants OPP1-5 */
-			operating-points = <
-				/* kHz    uV */
-				125000   975000
-				250000  1075000
-				500000  1200000
-				550000  1270000
-				600000  1350000
-			>;
+			/* OMAP343x/OMAP35xx variants OPP1-6 */
+			operating-points-v2 = <&cpu0_opp_table>;
+
 			clock-latency = <300000>; /* From legacy driver */
 		};
 	};
 
+	/* see Documentation/devicetree/bindings/opp/opp.txt */
+	cpu0_opp_table: opp-table {
+		compatible = "operating-points-v2-ti-cpu";
+		syscon = <&scm_conf>;
+
+		opp1-125000000 {
+			opp-hz = /bits/ 64 <125000000>;
+			/*
+			 * we currently only select the max voltage from table
+			 * Table 3-3 of the omap3530 Data sheet (SPRS507F).
+			 * Format is: <target min max>
+			 */
+			opp-microvolt = <975000 975000 975000>;
+			/*
+			 * first value is silicon revision bit mask
+			 * second one 720MHz Device Identification bit mask
+			 */
+			opp-supported-hw = <0xffffffff 3>;
+		};
+
+		opp2-250000000 {
+			opp-hz = /bits/ 64 <250000000>;
+			opp-microvolt = <1075000 1075000 1075000>;
+			opp-supported-hw = <0xffffffff 3>;
+			opp-suspend;
+		};
+
+		opp3-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <1200000 1200000 1200000>;
+			opp-supported-hw = <0xffffffff 3>;
+		};
+
+		opp4-550000000 {
+			opp-hz = /bits/ 64 <550000000>;
+			opp-microvolt = <1275000 1275000 1275000>;
+			opp-supported-hw = <0xffffffff 3>;
+		};
+
+		opp5-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <1350000 1350000 1350000>;
+			opp-supported-hw = <0xffffffff 3>;
+		};
+
+		opp6-720000000 {
+			opp-hz = /bits/ 64 <720000000>;
+			opp-microvolt = <1350000 1350000 1350000>;
+			/* only high-speed grade omap3530 devices */
+			opp-supported-hw = <0xffffffff 2>;
+			turbo-mode;
+		};
+	};
+
 	ocp@68000000 {
 		omap3_pmx_core2: pinmux@480025d8 {
 			compatible = "ti,omap3-padconf", "pinctrl-single";
diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi
index 1e552f08f120e..2fcd0c5d72baa 100644
--- a/arch/arm/boot/dts/omap36xx.dtsi
+++ b/arch/arm/boot/dts/omap36xx.dtsi
@@ -19,15 +19,53 @@
 	};
 
 	cpus {
-		/* OMAP3630/OMAP37xx 'standard device' variants OPP50 to OPP130 */
+		/* OMAP3630/OMAP37xx variants OPP50 to OPP130 and OPP1G */
 		cpu: cpu@0 {
-			operating-points = <
-				/* kHz    uV */
-				300000  1012500
-				600000  1200000
-				800000  1325000
-			>;
-			clock-latency = <300000>; /* From legacy driver */
+			operating-points-v2 = <&cpu0_opp_table>;
+
+			clock-latency = <300000>; /* From omap-cpufreq driver */
+		};
+	};
+
+	/* see Documentation/devicetree/bindings/opp/opp.txt */
+	cpu0_opp_table: opp-table {
+		compatible = "operating-points-v2-ti-cpu";
+		syscon = <&scm_conf>;
+
+		opp50-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			/*
+			 * we currently only select the max voltage from table
+			 * Table 4-19 of the DM3730 Data sheet (SPRS685B)
+			 * Format is: <target min max>
+			 */
+			opp-microvolt = <1012500 1012500 1012500>;
+			/*
+			 * first value is silicon revision bit mask
+			 * second one is "speed binned" bit mask
+			 */
+			opp-supported-hw = <0xffffffff 3>;
+			opp-suspend;
+		};
+
+		opp100-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <1200000 1200000 1200000>;
+			opp-supported-hw = <0xffffffff 3>;
+		};
+
+		opp130-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <1325000 1325000 1325000>;
+			opp-supported-hw = <0xffffffff 3>;
+		};
+
+		opp1g-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <1375000 1375000 1375000>;
+			/* only on am/dm37x with speed-binned bit set */
+			opp-supported-hw = <0xffffffff 2>;
+			turbo-mode;
 		};
 	};
 
diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c
index bca8d1f47fd2c..54bc76743b1fc 100644
--- a/drivers/cpufreq/cpufreq-dt-platdev.c
+++ b/drivers/cpufreq/cpufreq-dt-platdev.c
@@ -86,7 +86,6 @@ static const struct of_device_id whitelist[] __initconst = {
 	{ .compatible = "st-ericsson,u9540", },
 
 	{ .compatible = "ti,omap2", },
-	{ .compatible = "ti,omap3", },
 	{ .compatible = "ti,omap4", },
 	{ .compatible = "ti,omap5", },
 
@@ -137,6 +136,7 @@ static const struct of_device_id blacklist[] __initconst = {
 	{ .compatible = "ti,am33xx", },
 	{ .compatible = "ti,am43", },
 	{ .compatible = "ti,dra7", },
+	{ .compatible = "ti,omap3", },
 
 	{ }
 };

From b552904a73a3bb9a22b8b1db652a6f9285d535f3 Mon Sep 17 00:00:00 2001
From: "H. Nikolaus Schaller" <hns@goldelico.com>
Date: Wed, 11 Sep 2019 19:47:09 +0200
Subject: [PATCH 03/18] DTS: bindings: omap: update bindings documentation

* clarify that we now need either "ti,omap3430" or "ti,omap3630" or "ti,am3517" for omap3 chips
* clarify that "ti,omap3" has no default
* clarify that AM33x is not an "ti,omap3"
* clarify that the list of boards is incomplete
* remove some "ti,am33xx", "ti,omap3"
* add some missing "ti,omap4"

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Tested-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 .../devicetree/bindings/arm/omap/omap.txt     | 30 +++++++++++--------
 1 file changed, 17 insertions(+), 13 deletions(-)

diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt
index b301f753ed2c2..e77635c5422c6 100644
--- a/Documentation/devicetree/bindings/arm/omap/omap.txt
+++ b/Documentation/devicetree/bindings/arm/omap/omap.txt
@@ -43,7 +43,7 @@ SoC Families:
 
 - OMAP2 generic - defaults to OMAP2420
   compatible = "ti,omap2"
-- OMAP3 generic - defaults to OMAP3430
+- OMAP3 generic
   compatible = "ti,omap3"
 - OMAP4 generic - defaults to OMAP4430
   compatible = "ti,omap4"
@@ -51,6 +51,8 @@ SoC Families:
   compatible = "ti,omap5"
 - DRA7 generic - defaults to DRA742
   compatible = "ti,dra7"
+- AM33x generic
+  compatible = "ti,am33xx"
 - AM43x generic - defaults to AM4372
   compatible = "ti,am43"
 
@@ -63,12 +65,14 @@ SoCs:
 
 - OMAP3430
   compatible = "ti,omap3430", "ti,omap3"
+  legacy: "ti,omap34xx" - please do not use any more
 - AM3517
   compatible = "ti,am3517", "ti,omap3"
 - OMAP3630
-  compatible = "ti,omap36xx", "ti,omap3"
-- AM33xx
-  compatible = "ti,am33xx", "ti,omap3"
+  compatible = "ti,omap3630", "ti,omap3"
+  legacy: "ti,omap36xx" - please do not use any more
+- AM335x
+  compatible = "ti,am33xx"
 
 - OMAP4430
   compatible = "ti,omap4430", "ti,omap4"
@@ -110,19 +114,19 @@ SoCs:
 - AM4372
   compatible = "ti,am4372", "ti,am43"
 
-Boards:
+Boards (incomplete list of examples):
 
 - OMAP3 BeagleBoard : Low cost community board
-  compatible = "ti,omap3-beagle", "ti,omap3"
+  compatible = "ti,omap3-beagle", "ti,omap3430", "ti,omap3"
 
 - OMAP3 Tobi with Overo : Commercial expansion board with daughter board
-  compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3"
+  compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3"
 
 - OMAP4 SDP : Software Development Board
-  compatible = "ti,omap4-sdp", "ti,omap4430"
+  compatible = "ti,omap4-sdp", "ti,omap4430", "ti,omap4"
 
 - OMAP4 PandaBoard : Low cost community board
-  compatible = "ti,omap4-panda", "ti,omap4430"
+  compatible = "ti,omap4-panda", "ti,omap4430", "ti,omap4"
 
 - OMAP4 DuoVero with Parlor : Commercial expansion board with daughter board
   compatible = "gumstix,omap4-duovero-parlor", "gumstix,omap4-duovero", "ti,omap4430", "ti,omap4";
@@ -134,16 +138,16 @@ Boards:
   compatible = "variscite,var-dvk-om44", "variscite,var-som-om44", "ti,omap4460", "ti,omap4";
 
 - OMAP3 EVM : Software Development Board for OMAP35x, AM/DM37x
-  compatible = "ti,omap3-evm", "ti,omap3"
+  compatible = "ti,omap3-evm", "ti,omap3630", "ti,omap3"
 
 - AM335X EVM : Software Development Board for AM335x
-  compatible = "ti,am335x-evm", "ti,am33xx", "ti,omap3"
+  compatible = "ti,am335x-evm", "ti,am33xx"
 
 - AM335X Bone : Low cost community board
-  compatible = "ti,am335x-bone", "ti,am33xx", "ti,omap3"
+  compatible = "ti,am335x-bone", "ti,am33xx"
 
 - AM3359 ICEv2 : Low cost Industrial Communication Engine EVM.
-  compatible = "ti,am3359-icev2", "ti,am33xx", "ti,omap3"
+  compatible = "ti,am3359-icev2", "ti,am33xx"
 
 - AM335X OrionLXm : Substation Automation Platform
   compatible = "novatech,am335x-lxm", "ti,am33xx"

From 6ddf6c91e6f884e55d3bb3dcf84ead5bfed273ce Mon Sep 17 00:00:00 2001
From: "H. Nikolaus Schaller" <hns@goldelico.com>
Date: Wed, 11 Sep 2019 19:47:10 +0200
Subject: [PATCH 04/18] ARM: dts: omap3: bulk convert compatible to be
 explicitly ti,omap3430 or ti,omap3630 or ti,am3517

For the ti-cpufreq driver we need a clear separation between omap34 and omap36 families
since they have different silicon revisions and efuses.

So far ti,omap3630/ti,omap36xx is just an additional flag to ti,omap3 while omap34 has no
required entry.

Therefore we can not match omap34 boards properly.

This needs to add ti,omap3430 and ti,omap3630 where it is missing.

We also clean up some instances of missing ti,am3517 so that we can rely on
seeing either one of:

ti,am3517
ti,omap3430
ti,omap3630

in addition to ti,omap3.

We leave ti,omap34xx and ti,omap36xx untouched for compatibility.

The script to do the conversion is:

manually fix am3517_mt_ventoux.dts
find arch/arm/boot/dts -name '*.dts*' -exec fgrep -q '"ti,omap34xx"' {} \; ! -exec fgrep -q '"ti,omap3430"' {} \; -exec sed -i '' 's/"ti,omap34xx"/"ti,omap3430", "ti,omap34xx"/' {} \;
find arch/arm/boot/dts -name '*.dts*' -exec fgrep -q '"ti,omap36xx"' {} \; ! -exec fgrep -q '"ti,omap3630"' {} \; -exec sed -i '' 's/"ti,omap36xx"/"ti,omap3630", "ti,omap36xx"/' {} \;
find arch/arm/boot/dts \( -name 'omap*.dts*' -o -name 'logic*.dts*' \) -exec fgrep -q '"ti,omap3"' {} \; ! -exec fgrep -q '"ti,omap3630"' {} \; ! -exec fgrep -q '"ti,omap36xx"' {} \; ! -exec fgrep -q '"ti,am3517"' {} \; ! -exec fgrep -q '"ti,omap34xx"' {} \; ! -exec fgrep -q '"ti,omap3430"' {} \; -exec sed -i '' 's/"ti,omap3"/"ti,omap3430", "ti,omap3"/' {} \;

So if your out-of-tree omap3 board does not show any OPPs, please check
the compatibility entry and update if needed.

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Tested-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 arch/arm/boot/dts/am3517_mt_ventoux.dts            | 2 +-
 arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts   | 2 +-
 arch/arm/boot/dts/logicpd-torpedo-35xx-devkit.dts  | 2 +-
 arch/arm/boot/dts/omap3-beagle-xm.dts              | 2 +-
 arch/arm/boot/dts/omap3-beagle.dts                 | 2 +-
 arch/arm/boot/dts/omap3-cm-t3530.dts               | 2 +-
 arch/arm/boot/dts/omap3-cm-t3730.dts               | 2 +-
 arch/arm/boot/dts/omap3-devkit8000-lcd43.dts       | 2 +-
 arch/arm/boot/dts/omap3-devkit8000-lcd70.dts       | 2 +-
 arch/arm/boot/dts/omap3-devkit8000.dts             | 2 +-
 arch/arm/boot/dts/omap3-gta04.dtsi                 | 2 +-
 arch/arm/boot/dts/omap3-ha-lcd.dts                 | 2 +-
 arch/arm/boot/dts/omap3-ha.dts                     | 2 +-
 arch/arm/boot/dts/omap3-igep0020-rev-f.dts         | 2 +-
 arch/arm/boot/dts/omap3-igep0020.dts               | 2 +-
 arch/arm/boot/dts/omap3-igep0030-rev-g.dts         | 2 +-
 arch/arm/boot/dts/omap3-igep0030.dts               | 2 +-
 arch/arm/boot/dts/omap3-ldp.dts                    | 2 +-
 arch/arm/boot/dts/omap3-lilly-a83x.dtsi            | 2 +-
 arch/arm/boot/dts/omap3-lilly-dbb056.dts           | 2 +-
 arch/arm/boot/dts/omap3-n9.dts                     | 2 +-
 arch/arm/boot/dts/omap3-n950.dts                   | 2 +-
 arch/arm/boot/dts/omap3-overo-storm-alto35.dts     | 2 +-
 arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts | 2 +-
 arch/arm/boot/dts/omap3-overo-storm-gallop43.dts   | 2 +-
 arch/arm/boot/dts/omap3-overo-storm-palo35.dts     | 2 +-
 arch/arm/boot/dts/omap3-overo-storm-palo43.dts     | 2 +-
 arch/arm/boot/dts/omap3-overo-storm-summit.dts     | 2 +-
 arch/arm/boot/dts/omap3-overo-storm-tobi.dts       | 2 +-
 arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts    | 2 +-
 arch/arm/boot/dts/omap3-pandora-1ghz.dts           | 2 +-
 arch/arm/boot/dts/omap3-sbc-t3530.dts              | 2 +-
 arch/arm/boot/dts/omap3-sbc-t3730.dts              | 2 +-
 arch/arm/boot/dts/omap3-sniper.dts                 | 2 +-
 arch/arm/boot/dts/omap3-thunder.dts                | 2 +-
 arch/arm/boot/dts/omap3-zoom3.dts                  | 2 +-
 arch/arm/boot/dts/omap3430-sdp.dts                 | 2 +-
 37 files changed, 37 insertions(+), 37 deletions(-)

diff --git a/arch/arm/boot/dts/am3517_mt_ventoux.dts b/arch/arm/boot/dts/am3517_mt_ventoux.dts
index e507e4ae0d882..e7d7124a34ba2 100644
--- a/arch/arm/boot/dts/am3517_mt_ventoux.dts
+++ b/arch/arm/boot/dts/am3517_mt_ventoux.dts
@@ -8,7 +8,7 @@
 
 / {
 	model = "TeeJet Mt.Ventoux";
-	compatible = "teejet,mt_ventoux", "ti,omap3";
+	compatible = "teejet,mt_ventoux", "ti,am3517", "ti,omap3";
 
 	memory@80000000 {
 		device_type = "memory";
diff --git a/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts b/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts
index f7a841a288654..2a0a98fe67f06 100644
--- a/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts
+++ b/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts
@@ -9,5 +9,5 @@
 
 / {
 	model = "LogicPD Zoom OMAP35xx SOM-LV Development Kit";
-	compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3";
+	compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3430", "ti,omap3";
 };
diff --git a/arch/arm/boot/dts/logicpd-torpedo-35xx-devkit.dts b/arch/arm/boot/dts/logicpd-torpedo-35xx-devkit.dts
index 7675bc3fa8689..57bae2aa910e4 100644
--- a/arch/arm/boot/dts/logicpd-torpedo-35xx-devkit.dts
+++ b/arch/arm/boot/dts/logicpd-torpedo-35xx-devkit.dts
@@ -9,5 +9,5 @@
 
 / {
 	model = "LogicPD Zoom OMAP35xx Torpedo Development Kit";
-	compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap3";
+	compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap3430", "ti,omap3";
 };
diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
index 1aa99fc1487aa..125ed933ca75b 100644
--- a/arch/arm/boot/dts/omap3-beagle-xm.dts
+++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
@@ -8,7 +8,7 @@
 
 / {
 	model = "TI OMAP3 BeagleBoard xM";
-	compatible = "ti,omap3-beagle-xm", "ti,omap36xx", "ti,omap3";
+	compatible = "ti,omap3-beagle-xm", "ti,omap3630", "ti,omap36xx", "ti,omap3";
 
 	cpus {
 		cpu@0 {
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
index e3df3c166902f..4ed3f93f5841d 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -8,7 +8,7 @@
 
 / {
 	model = "TI OMAP3 BeagleBoard";
-	compatible = "ti,omap3-beagle", "ti,omap3";
+	compatible = "ti,omap3-beagle", "ti,omap3430", "ti,omap3";
 
 	cpus {
 		cpu@0 {
diff --git a/arch/arm/boot/dts/omap3-cm-t3530.dts b/arch/arm/boot/dts/omap3-cm-t3530.dts
index 76e52c78cbb4a..32dbaeaed147c 100644
--- a/arch/arm/boot/dts/omap3-cm-t3530.dts
+++ b/arch/arm/boot/dts/omap3-cm-t3530.dts
@@ -9,7 +9,7 @@
 
 / {
 	model = "CompuLab CM-T3530";
-	compatible = "compulab,omap3-cm-t3530", "ti,omap34xx", "ti,omap3";
+	compatible = "compulab,omap3-cm-t3530", "ti,omap3430", "ti,omap34xx", "ti,omap3";
 
 	/* Regulator to trigger the reset signal of the Wifi module */
 	mmc2_sdio_reset: regulator-mmc2-sdio-reset {
diff --git a/arch/arm/boot/dts/omap3-cm-t3730.dts b/arch/arm/boot/dts/omap3-cm-t3730.dts
index 6e944dfa0f3d1..683819bf09159 100644
--- a/arch/arm/boot/dts/omap3-cm-t3730.dts
+++ b/arch/arm/boot/dts/omap3-cm-t3730.dts
@@ -9,7 +9,7 @@
 
 / {
 	model = "CompuLab CM-T3730";
-	compatible = "compulab,omap3-cm-t3730", "ti,omap36xx", "ti,omap3";
+	compatible = "compulab,omap3-cm-t3730", "ti,omap3630", "ti,omap36xx", "ti,omap3";
 
 	wl12xx_vmmc2: wl12xx_vmmc2 {
 		compatible = "regulator-fixed";
diff --git a/arch/arm/boot/dts/omap3-devkit8000-lcd43.dts b/arch/arm/boot/dts/omap3-devkit8000-lcd43.dts
index a80fc60bc773e..afed85078ad8d 100644
--- a/arch/arm/boot/dts/omap3-devkit8000-lcd43.dts
+++ b/arch/arm/boot/dts/omap3-devkit8000-lcd43.dts
@@ -11,7 +11,7 @@
 #include "omap3-devkit8000-lcd-common.dtsi"
 / {
 	model = "TimLL OMAP3 Devkit8000 with 4.3'' LCD panel";
-	compatible = "timll,omap3-devkit8000", "ti,omap3";
+	compatible = "timll,omap3-devkit8000", "ti,omap3430", "ti,omap3";
 
 	lcd0: display {
 		panel-timing {
diff --git a/arch/arm/boot/dts/omap3-devkit8000-lcd70.dts b/arch/arm/boot/dts/omap3-devkit8000-lcd70.dts
index 0753776071f8c..07c51a105c0d7 100644
--- a/arch/arm/boot/dts/omap3-devkit8000-lcd70.dts
+++ b/arch/arm/boot/dts/omap3-devkit8000-lcd70.dts
@@ -11,7 +11,7 @@
 #include "omap3-devkit8000-lcd-common.dtsi"
 / {
 	model = "TimLL OMAP3 Devkit8000 with 7.0'' LCD panel";
-	compatible = "timll,omap3-devkit8000", "ti,omap3";
+	compatible = "timll,omap3-devkit8000", "ti,omap3430", "ti,omap3";
 
 	lcd0: display {
 		panel-timing {
diff --git a/arch/arm/boot/dts/omap3-devkit8000.dts b/arch/arm/boot/dts/omap3-devkit8000.dts
index faafc48d8f61c..162d0726b0080 100644
--- a/arch/arm/boot/dts/omap3-devkit8000.dts
+++ b/arch/arm/boot/dts/omap3-devkit8000.dts
@@ -7,7 +7,7 @@
 #include "omap3-devkit8000-common.dtsi"
 / {
 	model = "TimLL OMAP3 Devkit8000";
-	compatible = "timll,omap3-devkit8000", "ti,omap3";
+	compatible = "timll,omap3-devkit8000", "ti,omap3430", "ti,omap3";
 
 	aliases {
 		display1 = &dvi0;
diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
index d01fc8744fd79..f65ecc2db29a2 100644
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -11,7 +11,7 @@
 
 / {
 	model = "OMAP3 GTA04";
-	compatible = "ti,omap3-gta04", "ti,omap36xx", "ti,omap3";
+	compatible = "ti,omap3-gta04", "ti,omap3630", "ti,omap36xx", "ti,omap3";
 
 	cpus {
 		cpu@0 {
diff --git a/arch/arm/boot/dts/omap3-ha-lcd.dts b/arch/arm/boot/dts/omap3-ha-lcd.dts
index badb9b3c88977..c9ecbc45c8e29 100644
--- a/arch/arm/boot/dts/omap3-ha-lcd.dts
+++ b/arch/arm/boot/dts/omap3-ha-lcd.dts
@@ -8,7 +8,7 @@
 
 / {
 	model = "TI OMAP3 HEAD acoustics LCD-baseboard with TAO3530 SOM";
-	compatible = "headacoustics,omap3-ha-lcd", "technexion,omap3-tao3530", "ti,omap34xx", "ti,omap3";
+	compatible = "headacoustics,omap3-ha-lcd", "technexion,omap3-tao3530", "ti,omap3430", "ti,omap34xx", "ti,omap3";
 };
 
 &omap3_pmx_core {
diff --git a/arch/arm/boot/dts/omap3-ha.dts b/arch/arm/boot/dts/omap3-ha.dts
index a5365252bfbe6..35c4e15abeb73 100644
--- a/arch/arm/boot/dts/omap3-ha.dts
+++ b/arch/arm/boot/dts/omap3-ha.dts
@@ -8,7 +8,7 @@
 
 / {
 	model = "TI OMAP3 HEAD acoustics baseboard with TAO3530 SOM";
-	compatible = "headacoustics,omap3-ha", "technexion,omap3-tao3530", "ti,omap34xx", "ti,omap3";
+	compatible = "headacoustics,omap3-ha", "technexion,omap3-tao3530", "ti,omap3430", "ti,omap34xx", "ti,omap3";
 };
 
 &omap3_pmx_core {
diff --git a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts
index 03dcd05fb8a0d..d134ce1cffc0c 100644
--- a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts
+++ b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts
@@ -10,7 +10,7 @@
 
 / {
 	model = "IGEPv2 Rev. F (TI OMAP AM/DM37x)";
-	compatible = "isee,omap3-igep0020-rev-f", "ti,omap36xx", "ti,omap3";
+	compatible = "isee,omap3-igep0020-rev-f", "ti,omap3630", "ti,omap36xx", "ti,omap3";
 
 	/* Regulator to trigger the WL_EN signal of the Wifi module */
 	lbep5clwmc_wlen: regulator-lbep5clwmc-wlen {
diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts
index 6d0519e3dfd04..e341535a7162c 100644
--- a/arch/arm/boot/dts/omap3-igep0020.dts
+++ b/arch/arm/boot/dts/omap3-igep0020.dts
@@ -10,7 +10,7 @@
 
 / {
 	model = "IGEPv2 Rev. C (TI OMAP AM/DM37x)";
-	compatible = "isee,omap3-igep0020", "ti,omap36xx", "ti,omap3";
+	compatible = "isee,omap3-igep0020", "ti,omap3630", "ti,omap36xx", "ti,omap3";
 
 	vmmcsdio_fixed: fixedregulator-mmcsdio {
 		compatible = "regulator-fixed";
diff --git a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts
index 060acd1e803a0..9ca1d0f61964f 100644
--- a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts
+++ b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts
@@ -10,7 +10,7 @@
 
 / {
 	model = "IGEP COM MODULE Rev. G (TI OMAP AM/DM37x)";
-	compatible = "isee,omap3-igep0030-rev-g", "ti,omap36xx", "ti,omap3";
+	compatible = "isee,omap3-igep0030-rev-g", "ti,omap3630", "ti,omap36xx", "ti,omap3";
 
 	/* Regulator to trigger the WL_EN signal of the Wifi module */
 	lbep5clwmc_wlen: regulator-lbep5clwmc-wlen {
diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts
index 25170bd3c573f..32f31035daa26 100644
--- a/arch/arm/boot/dts/omap3-igep0030.dts
+++ b/arch/arm/boot/dts/omap3-igep0030.dts
@@ -10,7 +10,7 @@
 
 / {
 	model = "IGEP COM MODULE Rev. E (TI OMAP AM/DM37x)";
-	compatible = "isee,omap3-igep0030", "ti,omap36xx", "ti,omap3";
+	compatible = "isee,omap3-igep0030", "ti,omap3630", "ti,omap36xx", "ti,omap3";
 
 	vmmcsdio_fixed: fixedregulator-mmcsdio {
 		compatible = "regulator-fixed";
diff --git a/arch/arm/boot/dts/omap3-ldp.dts b/arch/arm/boot/dts/omap3-ldp.dts
index 9a5fde2d9bce1..ec9ba04ef43bc 100644
--- a/arch/arm/boot/dts/omap3-ldp.dts
+++ b/arch/arm/boot/dts/omap3-ldp.dts
@@ -10,7 +10,7 @@
 
 / {
 	model = "TI OMAP3430 LDP (Zoom1 Labrador)";
-	compatible = "ti,omap3-ldp", "ti,omap3";
+	compatible = "ti,omap3-ldp", "ti,omap3430", "ti,omap3";
 
 	memory@80000000 {
 		device_type = "memory";
diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
index c22833d4e5685..73d477898ec2a 100644
--- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
+++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
@@ -7,7 +7,7 @@
 
 / {
 	model = "INCOstartec LILLY-A83X module (DM3730)";
-	compatible = "incostartec,omap3-lilly-a83x", "ti,omap36xx", "ti,omap3";
+	compatible = "incostartec,omap3-lilly-a83x", "ti,omap3630", "ti,omap36xx", "ti,omap3";
 
 	chosen {
 			bootargs = "console=ttyO0,115200n8 vt.global_cursor_default=0 consoleblank=0";
diff --git a/arch/arm/boot/dts/omap3-lilly-dbb056.dts b/arch/arm/boot/dts/omap3-lilly-dbb056.dts
index fec3354000748..ecb4ef738e07b 100644
--- a/arch/arm/boot/dts/omap3-lilly-dbb056.dts
+++ b/arch/arm/boot/dts/omap3-lilly-dbb056.dts
@@ -8,7 +8,7 @@
 
 / {
 	model = "INCOstartec LILLY-DBB056 (DM3730)";
-	compatible = "incostartec,omap3-lilly-dbb056", "incostartec,omap3-lilly-a83x", "ti,omap36xx", "ti,omap3";
+	compatible = "incostartec,omap3-lilly-dbb056", "incostartec,omap3-lilly-a83x", "ti,omap3630", "ti,omap36xx", "ti,omap3";
 };
 
 &twl {
diff --git a/arch/arm/boot/dts/omap3-n9.dts b/arch/arm/boot/dts/omap3-n9.dts
index 74c0ff2350d32..2495a696cec6a 100644
--- a/arch/arm/boot/dts/omap3-n9.dts
+++ b/arch/arm/boot/dts/omap3-n9.dts
@@ -12,7 +12,7 @@
 
 / {
 	model = "Nokia N9";
-	compatible = "nokia,omap3-n9", "ti,omap36xx", "ti,omap3";
+	compatible = "nokia,omap3-n9", "ti,omap3630", "ti,omap36xx", "ti,omap3";
 };
 
 &i2c2 {
diff --git a/arch/arm/boot/dts/omap3-n950.dts b/arch/arm/boot/dts/omap3-n950.dts
index 9886bf8b90ab0..31d47a1fad847 100644
--- a/arch/arm/boot/dts/omap3-n950.dts
+++ b/arch/arm/boot/dts/omap3-n950.dts
@@ -12,7 +12,7 @@
 
 / {
 	model = "Nokia N950";
-	compatible = "nokia,omap3-n950", "ti,omap36xx", "ti,omap3";
+	compatible = "nokia,omap3-n950", "ti,omap3630", "ti,omap36xx", "ti,omap3";
 
 	keys {
 		compatible = "gpio-keys";
diff --git a/arch/arm/boot/dts/omap3-overo-storm-alto35.dts b/arch/arm/boot/dts/omap3-overo-storm-alto35.dts
index 18338576c41d6..7f04dfad82034 100644
--- a/arch/arm/boot/dts/omap3-overo-storm-alto35.dts
+++ b/arch/arm/boot/dts/omap3-overo-storm-alto35.dts
@@ -14,5 +14,5 @@
 
 / {
 	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Alto35";
-	compatible = "gumstix,omap3-overo-alto35", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3";
+	compatible = "gumstix,omap3-overo-alto35", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3";
 };
diff --git a/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts b/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts
index f204c8af82818..bc5a04e033362 100644
--- a/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts
+++ b/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts
@@ -14,7 +14,7 @@
 
 / {
 	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Chestnut43";
-	compatible = "gumstix,omap3-overo-chestnut43", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3";
+	compatible = "gumstix,omap3-overo-chestnut43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3";
 };
 
 &omap3_pmx_core2 {
diff --git a/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts b/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts
index c633f7cee68e2..065c31cbf0e29 100644
--- a/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts
+++ b/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts
@@ -14,7 +14,7 @@
 
 / {
 	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Gallop43";
-	compatible = "gumstix,omap3-overo-gallop43", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3";
+	compatible = "gumstix,omap3-overo-gallop43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3";
 };
 
 &omap3_pmx_core2 {
diff --git a/arch/arm/boot/dts/omap3-overo-storm-palo35.dts b/arch/arm/boot/dts/omap3-overo-storm-palo35.dts
index fb88ebc9858c7..e38c1c51392c5 100644
--- a/arch/arm/boot/dts/omap3-overo-storm-palo35.dts
+++ b/arch/arm/boot/dts/omap3-overo-storm-palo35.dts
@@ -14,7 +14,7 @@
 
 / {
 	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Palo35";
-	compatible = "gumstix,omap3-overo-palo35", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3";
+	compatible = "gumstix,omap3-overo-palo35", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3";
 };
 
 &omap3_pmx_core2 {
diff --git a/arch/arm/boot/dts/omap3-overo-storm-palo43.dts b/arch/arm/boot/dts/omap3-overo-storm-palo43.dts
index 76cca00d97b6e..e6dc23159c4d9 100644
--- a/arch/arm/boot/dts/omap3-overo-storm-palo43.dts
+++ b/arch/arm/boot/dts/omap3-overo-storm-palo43.dts
@@ -14,7 +14,7 @@
 
 / {
 	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Palo43";
-	compatible = "gumstix,omap3-overo-palo43", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3";
+	compatible = "gumstix,omap3-overo-palo43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3";
 };
 
 &omap3_pmx_core2 {
diff --git a/arch/arm/boot/dts/omap3-overo-storm-summit.dts b/arch/arm/boot/dts/omap3-overo-storm-summit.dts
index cc081a9e4c1eb..587c08ce282d3 100644
--- a/arch/arm/boot/dts/omap3-overo-storm-summit.dts
+++ b/arch/arm/boot/dts/omap3-overo-storm-summit.dts
@@ -14,7 +14,7 @@
 
 / {
 	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Summit";
-	compatible = "gumstix,omap3-overo-summit", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3";
+	compatible = "gumstix,omap3-overo-summit", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3";
 };
 
 &omap3_pmx_core2 {
diff --git a/arch/arm/boot/dts/omap3-overo-storm-tobi.dts b/arch/arm/boot/dts/omap3-overo-storm-tobi.dts
index 1de41c0826e07..f57de6010994e 100644
--- a/arch/arm/boot/dts/omap3-overo-storm-tobi.dts
+++ b/arch/arm/boot/dts/omap3-overo-storm-tobi.dts
@@ -14,6 +14,6 @@
 
 / {
 	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Tobi";
-	compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3";
+	compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3";
 };
 
diff --git a/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts b/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts
index 9ed13118ed8e8..281af6c113beb 100644
--- a/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts
+++ b/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts
@@ -14,5 +14,5 @@
 
 / {
 	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on TobiDuo";
-	compatible = "gumstix,omap3-overo-tobiduo", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3";
+	compatible = "gumstix,omap3-overo-tobiduo", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3";
 };
diff --git a/arch/arm/boot/dts/omap3-pandora-1ghz.dts b/arch/arm/boot/dts/omap3-pandora-1ghz.dts
index 81b957f33c9f6..ea509956d7aca 100644
--- a/arch/arm/boot/dts/omap3-pandora-1ghz.dts
+++ b/arch/arm/boot/dts/omap3-pandora-1ghz.dts
@@ -16,7 +16,7 @@
 / {
 	model = "Pandora Handheld Console 1GHz";
 
-	compatible = "openpandora,omap3-pandora-1ghz", "ti,omap36xx", "ti,omap3";
+	compatible = "openpandora,omap3-pandora-1ghz", "ti,omap3630", "ti,omap36xx", "ti,omap3";
 };
 
 &omap3_pmx_core2 {
diff --git a/arch/arm/boot/dts/omap3-sbc-t3530.dts b/arch/arm/boot/dts/omap3-sbc-t3530.dts
index ae96002abb3b6..24bf3fd86641f 100644
--- a/arch/arm/boot/dts/omap3-sbc-t3530.dts
+++ b/arch/arm/boot/dts/omap3-sbc-t3530.dts
@@ -8,7 +8,7 @@
 
 / {
 	model = "CompuLab SBC-T3530 with CM-T3530";
-	compatible = "compulab,omap3-sbc-t3530", "compulab,omap3-cm-t3530", "ti,omap34xx", "ti,omap3";
+	compatible = "compulab,omap3-sbc-t3530", "compulab,omap3-cm-t3530", "ti,omap3430", "ti,omap34xx", "ti,omap3";
 
 	aliases {
 		display0 = &dvi0;
diff --git a/arch/arm/boot/dts/omap3-sbc-t3730.dts b/arch/arm/boot/dts/omap3-sbc-t3730.dts
index 7de6df16fc175..eb3893b9535e6 100644
--- a/arch/arm/boot/dts/omap3-sbc-t3730.dts
+++ b/arch/arm/boot/dts/omap3-sbc-t3730.dts
@@ -8,7 +8,7 @@
 
 / {
 	model = "CompuLab SBC-T3730 with CM-T3730";
-	compatible = "compulab,omap3-sbc-t3730", "compulab,omap3-cm-t3730", "ti,omap36xx", "ti,omap3";
+	compatible = "compulab,omap3-sbc-t3730", "compulab,omap3-cm-t3730", "ti,omap3630", "ti,omap36xx", "ti,omap3";
 
 	aliases {
 		display0 = &dvi0;
diff --git a/arch/arm/boot/dts/omap3-sniper.dts b/arch/arm/boot/dts/omap3-sniper.dts
index 40a87330e8c3d..b6879cdc5c13e 100644
--- a/arch/arm/boot/dts/omap3-sniper.dts
+++ b/arch/arm/boot/dts/omap3-sniper.dts
@@ -9,7 +9,7 @@
 
 / {
 	model = "LG Optimus Black";
-	compatible = "lg,omap3-sniper", "ti,omap36xx", "ti,omap3";
+	compatible = "lg,omap3-sniper", "ti,omap3630", "ti,omap36xx", "ti,omap3";
 
 	cpus {
 		cpu@0 {
diff --git a/arch/arm/boot/dts/omap3-thunder.dts b/arch/arm/boot/dts/omap3-thunder.dts
index 6276e7079b366..64221e3b3477d 100644
--- a/arch/arm/boot/dts/omap3-thunder.dts
+++ b/arch/arm/boot/dts/omap3-thunder.dts
@@ -8,7 +8,7 @@
 
 / {
 	model = "TI OMAP3 Thunder baseboard with TAO3530 SOM";
-	compatible = "technexion,omap3-thunder", "technexion,omap3-tao3530", "ti,omap34xx", "ti,omap3";
+	compatible = "technexion,omap3-thunder", "technexion,omap3-tao3530", "ti,omap3430", "ti,omap34xx", "ti,omap3";
 };
 
 &omap3_pmx_core {
diff --git a/arch/arm/boot/dts/omap3-zoom3.dts b/arch/arm/boot/dts/omap3-zoom3.dts
index db3a2fe84e990..d240e39f2151e 100644
--- a/arch/arm/boot/dts/omap3-zoom3.dts
+++ b/arch/arm/boot/dts/omap3-zoom3.dts
@@ -9,7 +9,7 @@
 
 / {
 	model = "TI Zoom3";
-	compatible = "ti,omap3-zoom3", "ti,omap36xx", "ti,omap3";
+	compatible = "ti,omap3-zoom3", "ti,omap3630", "ti,omap36xx", "ti,omap3";
 
 	cpus {
 		cpu@0 {
diff --git a/arch/arm/boot/dts/omap3430-sdp.dts b/arch/arm/boot/dts/omap3430-sdp.dts
index 0abd61108a539..7bfde8aac7ae1 100644
--- a/arch/arm/boot/dts/omap3430-sdp.dts
+++ b/arch/arm/boot/dts/omap3430-sdp.dts
@@ -8,7 +8,7 @@
 
 / {
 	model = "TI OMAP3430 SDP";
-	compatible = "ti,omap3430-sdp", "ti,omap3";
+	compatible = "ti,omap3430-sdp", "ti,omap3430", "ti,omap3";
 
 	memory@80000000 {
 		device_type = "memory";

From 42e52616f382a455d64629b156685d5adc21ce85 Mon Sep 17 00:00:00 2001
From: "H. Nikolaus Schaller" <hns@goldelico.com>
Date: Wed, 11 Sep 2019 19:47:11 +0200
Subject: [PATCH 05/18] cpufreq: ti-cpufreq: omap36xx use "cpu0","vbb" if run
 in multi_regulator mode

In preparation for using the multi_regulator capability of
this driver for handling the ABB LDO for OPP1G of the omap36xx
we have to take care that the (legacy) vdd-supply name is
cpu0-supply = <&vcc>;

To do this we add another field to the SoC description table which
optionally can specify a list of regulator names.

For omap36xx we define "cpu0-supply" and "vbb-supply".

The default remains "vdd-supply" and "vbb-supply".

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Rob Herring <robh@kernel.org>
Tested-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 .../devicetree/bindings/cpufreq/ti-cpufreq.txt       |  6 +++++-
 drivers/cpufreq/ti-cpufreq.c                         | 12 ++++++++++--
 2 files changed, 15 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt b/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt
index 0c38e4b8fc518..1758051798fed 100644
--- a/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt
+++ b/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt
@@ -15,12 +15,16 @@ In 'cpus' nodes:
 
 In 'operating-points-v2' table:
 - compatible: Should be
-	- 'operating-points-v2-ti-cpu' for am335x, am43xx, and dra7xx/am57xx SoCs
+	- 'operating-points-v2-ti-cpu' for am335x, am43xx, and dra7xx/am57xx,
+	  omap34xx, omap36xx and am3517 SoCs
 - syscon: A phandle pointing to a syscon node representing the control module
 	  register space of the SoC.
 
 Optional properties:
 --------------------
+- "vdd-supply", "vbb-supply": to define two regulators for dra7xx
+- "cpu0-supply", "vbb-supply": to define two regulators for omap36xx
+
 For each opp entry in 'operating-points-v2' table:
 - opp-supported-hw: Two bitfields indicating:
 	1. Which revision of the SoC the OPP is supported by
diff --git a/drivers/cpufreq/ti-cpufreq.c b/drivers/cpufreq/ti-cpufreq.c
index 13d426559333e..a161098652e2c 100644
--- a/drivers/cpufreq/ti-cpufreq.c
+++ b/drivers/cpufreq/ti-cpufreq.c
@@ -41,6 +41,7 @@
 struct ti_cpufreq_data;
 
 struct ti_cpufreq_soc_data {
+	const char * const *reg_names;
 	unsigned long (*efuse_xlate)(struct ti_cpufreq_data *opp_data,
 				     unsigned long efuse);
 	unsigned long efuse_fallback;
@@ -165,7 +166,10 @@ static struct ti_cpufreq_soc_data omap34xx_soc_data = {
  *    seems to always read as 0).
  */
 
+static const char * const omap3_reg_names[] = {"cpu0", "vbb"};
+
 static struct ti_cpufreq_soc_data omap36xx_soc_data = {
+	.reg_names = omap3_reg_names,
 	.efuse_xlate = omap3_efuse_xlate,
 	.efuse_offset = OMAP3_CONTROL_DEVICE_STATUS - OMAP3_SYSCON_BASE,
 	.efuse_shift = 9,
@@ -299,7 +303,7 @@ static int ti_cpufreq_probe(struct platform_device *pdev)
 	const struct of_device_id *match;
 	struct opp_table *ti_opp_table;
 	struct ti_cpufreq_data *opp_data;
-	const char * const reg_names[] = {"vdd", "vbb"};
+	const char * const default_reg_names[] = {"vdd", "vbb"};
 	int ret;
 
 	match = dev_get_platdata(&pdev->dev);
@@ -355,9 +359,13 @@ static int ti_cpufreq_probe(struct platform_device *pdev)
 	opp_data->opp_table = ti_opp_table;
 
 	if (opp_data->soc_data->multi_regulator) {
+		const char * const *reg_names = default_reg_names;
+
+		if (opp_data->soc_data->reg_names)
+			reg_names = opp_data->soc_data->reg_names;
 		ti_opp_table = dev_pm_opp_set_regulators(opp_data->cpu_dev,
 							 reg_names,
-							 ARRAY_SIZE(reg_names));
+							 ARRAY_SIZE(default_reg_names));
 		if (IS_ERR(ti_opp_table)) {
 			dev_pm_opp_put_supported_hw(opp_data->opp_table);
 			ret =  PTR_ERR(ti_opp_table);

From 341afbc9ea3983a2261c9e495e0b66b36b5dda20 Mon Sep 17 00:00:00 2001
From: "H. Nikolaus Schaller" <hns@goldelico.com>
Date: Wed, 11 Sep 2019 19:47:12 +0200
Subject: [PATCH 06/18] ARM: dts: omap36xx: using OPP1G needs to control the
 abb_ldo

See DM3730,DM275 data sheet (SPRS685B) footnote (6) in Table 4-19
which says that ABB must be switched to FBB mode when using the
OPP1G.

The LOD definition abb_mpu_iva already exists so that we need
to add plumbing for vbb-supply = <&abb_mpu_iva>
and define two voltage vectors for each OPP so that the abb LDO
is also updated by the ti-cpufreq driver.

We also must switch the ti_cpufreq_soc_data to multi_regulator.

Note: reading out the abb reglator voltage to verify that
it does do transitions can be done by

cat /sys/devices/platform/68000000.ocp/483072f0.regulator-abb-mpu/regulator/regulator.*/microvolts

Likewise, read the twl4030 provided VDD voltage by

cat /sys/devices/platform/68000000.ocp/48070000.i2c/i2c-0/0-0048/48070000.i2c:twl@48:regulator-vdd1/regulator/regulator.*/microvolts

Note: to check if the ABB FBB is enabled/disabled, check
registers

PRM_LDO_ABB_CTRL 0x483072F4 bit 3:0 1=bypass 5=FBB
PRM_LDO_ABB_SETUP 0x483072F0 0x00=bypass 0x11=FBB

e.g.

/dev/mem opened.
Memory mapped at address 0xb6fe4000.
Value at address 0x483072F4 (0xb6fe42f4): 0x3205
/dev/mem opened.
Memory mapped at address 0xb6f89000.
Value at address 0x483072F4 (0xb6f892f4): 0x3201

Note: omap34xx and am3517 have/need no comparable LDO
or mechanism.

Suggested-by: Adam Ford <aford173@gmail.com>
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Tested-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 arch/arm/boot/dts/omap36xx.dtsi | 21 ++++++++++++++++-----
 drivers/cpufreq/ti-cpufreq.c    |  2 +-
 2 files changed, 17 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi
index 2fcd0c5d72baa..c618cb257d00b 100644
--- a/arch/arm/boot/dts/omap36xx.dtsi
+++ b/arch/arm/boot/dts/omap36xx.dtsi
@@ -23,6 +23,7 @@
 		cpu: cpu@0 {
 			operating-points-v2 = <&cpu0_opp_table>;
 
+			vbb-supply = <&abb_mpu_iva>;
 			clock-latency = <300000>; /* From omap-cpufreq driver */
 		};
 	};
@@ -37,9 +38,11 @@
 			/*
 			 * we currently only select the max voltage from table
 			 * Table 4-19 of the DM3730 Data sheet (SPRS685B)
-			 * Format is: <target min max>
+			 * Format is:	cpu0-supply:	<target min max>
+			 *		vbb-supply:	<target min max>
 			 */
-			opp-microvolt = <1012500 1012500 1012500>;
+			opp-microvolt = <1012500 1012500 1012500>,
+					 <1012500 1012500 1012500>;
 			/*
 			 * first value is silicon revision bit mask
 			 * second one is "speed binned" bit mask
@@ -50,25 +53,33 @@
 
 		opp100-600000000 {
 			opp-hz = /bits/ 64 <600000000>;
-			opp-microvolt = <1200000 1200000 1200000>;
+			opp-microvolt = <1200000 1200000 1200000>,
+					 <1200000 1200000 1200000>;
 			opp-supported-hw = <0xffffffff 3>;
 		};
 
 		opp130-800000000 {
 			opp-hz = /bits/ 64 <800000000>;
-			opp-microvolt = <1325000 1325000 1325000>;
+			opp-microvolt = <1325000 1325000 1325000>,
+					 <1325000 1325000 1325000>;
 			opp-supported-hw = <0xffffffff 3>;
 		};
 
 		opp1g-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt = <1375000 1375000 1375000>;
+			opp-microvolt = <1375000 1375000 1375000>,
+					 <1375000 1375000 1375000>;
 			/* only on am/dm37x with speed-binned bit set */
 			opp-supported-hw = <0xffffffff 2>;
 			turbo-mode;
 		};
 	};
 
+	opp_supply_mpu_iva: opp_supply {
+		compatible = "ti,omap-opp-supply";
+		ti,absolute-max-voltage-uv = <1375000>;
+	};
+
 	ocp@68000000 {
 		uart4: serial@49042000 {
 			compatible = "ti,omap3-uart";
diff --git a/drivers/cpufreq/ti-cpufreq.c b/drivers/cpufreq/ti-cpufreq.c
index a161098652e2c..c7e5d3d431188 100644
--- a/drivers/cpufreq/ti-cpufreq.c
+++ b/drivers/cpufreq/ti-cpufreq.c
@@ -175,7 +175,7 @@ static struct ti_cpufreq_soc_data omap36xx_soc_data = {
 	.efuse_shift = 9,
 	.efuse_mask = BIT(9),
 	.rev_offset = OMAP3_CONTROL_IDCODE - OMAP3_SYSCON_BASE,
-	.multi_regulator = false,
+	.multi_regulator = true,
 };
 
 /**

From 3fbeef397212046cc514fe9fcd07e67e6ca32163 Mon Sep 17 00:00:00 2001
From: Adam Ford <aford173@gmail.com>
Date: Wed, 11 Sep 2019 19:47:13 +0200
Subject: [PATCH 07/18] cpufreq: ti-cpufreq: Add support for AM3517

The AM3517 only lists 600MHz @ 1.2V, but the register values for
0x4830A204 = 1b86 802f, it seems like am3517 might be a derivative
of the omap36 which OPPs would be OPP50 (300 MHz) and OPP100
(600 MHz).

This patch simply adds the am3517 to the compatible table
similar to a mix of the omap3430 and omap3430 structure.

Signed-off-by: Adam Ford <aford173@gmail.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Tested-by: Adam Ford <aford173@gmail.com>
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 drivers/cpufreq/ti-cpufreq.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/drivers/cpufreq/ti-cpufreq.c b/drivers/cpufreq/ti-cpufreq.c
index c7e5d3d431188..557cb513bf7f7 100644
--- a/drivers/cpufreq/ti-cpufreq.c
+++ b/drivers/cpufreq/ti-cpufreq.c
@@ -178,6 +178,21 @@ static struct ti_cpufreq_soc_data omap36xx_soc_data = {
 	.multi_regulator = true,
 };
 
+/*
+ * AM3517 is quite similar to AM/DM37x except that it has no
+ * high speed grade eFuse and no abb ldo
+ */
+
+static struct ti_cpufreq_soc_data am3517_soc_data = {
+	.efuse_xlate = omap3_efuse_xlate,
+	.efuse_offset = OMAP3_CONTROL_DEVICE_STATUS - OMAP3_SYSCON_BASE,
+	.efuse_shift = 0,
+	.efuse_mask = 0,
+	.rev_offset = OMAP3_CONTROL_IDCODE - OMAP3_SYSCON_BASE,
+	.multi_regulator = false,
+};
+
+
 /**
  * ti_cpufreq_get_efuse() - Parse and return efuse value present on SoC
  * @opp_data: pointer to ti_cpufreq_data context
@@ -275,6 +290,7 @@ static int ti_cpufreq_setup_syscon_register(struct ti_cpufreq_data *opp_data)
 
 static const struct of_device_id ti_cpufreq_of_match[] = {
 	{ .compatible = "ti,am33xx", .data = &am3x_soc_data, },
+	{ .compatible = "ti,am3517", .data = &am3517_soc_data, },
 	{ .compatible = "ti,am43", .data = &am4x_soc_data, },
 	{ .compatible = "ti,dra7", .data = &dra7_soc_data },
 	{ .compatible = "ti,omap34xx", .data = &omap34xx_soc_data, },

From 09865094536c759d84aa0b9ce9a27ffed1f2bd9e Mon Sep 17 00:00:00 2001
From: Adam Ford <aford173@gmail.com>
Date: Wed, 11 Sep 2019 19:47:14 +0200
Subject: [PATCH 08/18] ARM: dts: Add OPP-V2 table for AM3517

The AM3517 only lists 600MHz @ 1.2V, but the register values for
0x4830A204 = 1b86 802f, it seems like am3517 might be a derivative
of the omap36 which OPPs would be OPP50 (300 MHz) and OPP100
(600 MHz).

This patch sets up the OPP50 and OPP100 tables at 300MHz and 600MHz
for the AM3517 with each having an operating voltage at 1.2V.

Signed-off-by: Adam Ford <aford173@gmail.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Tested-by: Adam Ford <aford173@gmail.com>
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 arch/arm/boot/dts/am3517.dtsi | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi
index bf3002009b002..76f819f4ba48b 100644
--- a/arch/arm/boot/dts/am3517.dtsi
+++ b/arch/arm/boot/dts/am3517.dtsi
@@ -16,6 +16,37 @@
 		can = &hecc;
 	};
 
+	cpus {
+		cpu: cpu@0 {
+			/* Based on OMAP3630 variants OPP50 and OPP100 */
+			operating-points-v2 = <&cpu0_opp_table>;
+
+			clock-latency = <300000>; /* From legacy driver */
+		};
+	};
+
+	cpu0_opp_table: opp-table {
+		compatible = "operating-points-v2-ti-cpu";
+		syscon = <&scm_conf>;
+		/*
+		 * AM3517 TRM only lists 600MHz @ 1.2V, but omap36xx
+		 * appear to operate at 300MHz as well. Since AM3517 only
+		 * lists one operating voltage, it will remain fixed at 1.2V
+		 */
+		opp50-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-microvolt = <1200000>;
+			opp-supported-hw = <0xffffffff 0xffffffff>;
+			opp-suspend;
+		};
+
+		opp100-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <1200000>;
+			opp-supported-hw = <0xffffffff 0xffffffff>;
+		};
+	};
+
 	ocp@68000000 {
 		am35x_otg_hs: am35x_otg_hs@5c040000 {
 			compatible = "ti,omap3-musb";

From 1b82a4b5d331ba3814a53f2fc289c2d2716bd3fd Mon Sep 17 00:00:00 2001
From: Sudeep Holla <sudeep.holla@arm.com>
Date: Fri, 18 Oct 2019 11:37:45 +0100
Subject: [PATCH 09/18] cpufreq: scpi: remove stale/outdated comment about the
 driver

Commit 343a8d17fa8d ("cpufreq: scpi: remove arm_big_little dependency")
removed the arm_big_little dependency from scpi driver and doesn't
provide any ops to arm_big_little cpufreq driver. Lets remove that
stale comment.

Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 drivers/cpufreq/scpi-cpufreq.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/cpufreq/scpi-cpufreq.c b/drivers/cpufreq/scpi-cpufreq.c
index 2b51e0718c9f6..20d1f85d5f5a4 100644
--- a/drivers/cpufreq/scpi-cpufreq.c
+++ b/drivers/cpufreq/scpi-cpufreq.c
@@ -1,8 +1,6 @@
 /*
  * System Control and Power Interface (SCPI) based CPUFreq Interface driver
  *
- * It provides necessary ops to arm_big_little cpufreq driver.
- *
  * Copyright (C) 2015 ARM Ltd.
  * Sudeep Holla <sudeep.holla@arm.com>
  *

From a0f950d3a0addc9552233aa2ffbdc086aa02106a Mon Sep 17 00:00:00 2001
From: Sudeep Holla <sudeep.holla@arm.com>
Date: Mon, 21 Oct 2019 11:20:34 +0100
Subject: [PATCH 10/18] cpufreq: merge arm_big_little and vexpress-spc

arm_big_little cpufreq driver was designed as a generic big little
driver that could be used by any platform and make use of bL switcher.
Over years alternate solutions have been designed and merged to deal
with bL/HMP systems like EAS.

Also since no other driver made use of generic arm_big_little cpufreq
driver except Vexpress SPC, we can merge them together as vexpress-spc
driver used only on Vexpress TC2(CA15_CA7) platform.

Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 MAINTAINERS                            |   5 +-
 drivers/cpufreq/Kconfig.arm            |  12 +-
 drivers/cpufreq/Makefile               |   2 -
 drivers/cpufreq/arm_big_little.c       | 658 ------------------------
 drivers/cpufreq/arm_big_little.h       |  43 --
 drivers/cpufreq/vexpress-spc-cpufreq.c | 660 ++++++++++++++++++++++++-
 6 files changed, 651 insertions(+), 729 deletions(-)
 delete mode 100644 drivers/cpufreq/arm_big_little.c
 delete mode 100644 drivers/cpufreq/arm_big_little.h

diff --git a/MAINTAINERS b/MAINTAINERS
index 296de2b51c832..07f5d8dc30277 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4273,14 +4273,13 @@ F:	include/linux/cpufreq.h
 F:	include/linux/sched/cpufreq.h
 F:	tools/testing/selftests/cpufreq/
 
-CPU FREQUENCY DRIVERS - ARM BIG LITTLE
+CPU FREQUENCY DRIVERS - VEXPRESS SPC ARM BIG LITTLE
 M:	Viresh Kumar <viresh.kumar@linaro.org>
 M:	Sudeep Holla <sudeep.holla@arm.com>
 L:	linux-pm@vger.kernel.org
 W:	http://www.arm.com/products/processors/technologies/biglittleprocessing.php
 S:	Maintained
-F:	drivers/cpufreq/arm_big_little.h
-F:	drivers/cpufreq/arm_big_little.c
+F:	drivers/cpufreq/vexpress-spc-cpufreq.c
 
 CPU POWER MONITORING SUBSYSTEM
 M:	Thomas Renninger <trenn@suse.com>
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index a905796f7f856..3858d86cf409c 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -49,14 +49,6 @@ config ARM_ARMADA_8K_CPUFREQ
 
 	  If in doubt, say N.
 
-# big LITTLE core layer and glue drivers
-config ARM_BIG_LITTLE_CPUFREQ
-	tristate "Generic ARM big LITTLE CPUfreq driver"
-	depends on ARM_CPU_TOPOLOGY && HAVE_CLK
-	select PM_OPP
-	help
-	  This enables the Generic CPUfreq driver for ARM big.LITTLE platforms.
-
 config ARM_SCPI_CPUFREQ
 	tristate "SCPI based CPUfreq driver"
 	depends on ARM_SCPI_PROTOCOL && COMMON_CLK_SCPI
@@ -69,7 +61,9 @@ config ARM_SCPI_CPUFREQ
 
 config ARM_VEXPRESS_SPC_CPUFREQ
 	tristate "Versatile Express SPC based CPUfreq driver"
-	depends on ARM_BIG_LITTLE_CPUFREQ && ARCH_VEXPRESS_SPC
+	depends on ARM_CPU_TOPOLOGY && HAVE_CLK
+	depends on ARCH_VEXPRESS_SPC
+	select PM_OPP
 	help
 	  This add the CPUfreq driver support for Versatile Express
 	  big.LITTLE platforms using SPC for power management.
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index 9a9f5ccd13d98..f6670c4abbb03 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -47,8 +47,6 @@ obj-$(CONFIG_X86_SFI_CPUFREQ)		+= sfi-cpufreq.o
 
 ##################################################################################
 # ARM SoC drivers
-obj-$(CONFIG_ARM_BIG_LITTLE_CPUFREQ)	+= arm_big_little.o
-
 obj-$(CONFIG_ARM_ARMADA_37XX_CPUFREQ)	+= armada-37xx-cpufreq.o
 obj-$(CONFIG_ARM_ARMADA_8K_CPUFREQ)	+= armada-8k-cpufreq.o
 obj-$(CONFIG_ARM_BRCMSTB_AVS_CPUFREQ)	+= brcmstb-avs-cpufreq.o
diff --git a/drivers/cpufreq/arm_big_little.c b/drivers/cpufreq/arm_big_little.c
deleted file mode 100644
index 7fe52fcddcf1e..0000000000000
--- a/drivers/cpufreq/arm_big_little.c
+++ /dev/null
@@ -1,658 +0,0 @@
-/*
- * ARM big.LITTLE Platforms CPUFreq support
- *
- * Copyright (C) 2013 ARM Ltd.
- * Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>
- *
- * Copyright (C) 2013 Linaro.
- * Viresh Kumar <viresh.kumar@linaro.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/clk.h>
-#include <linux/cpu.h>
-#include <linux/cpufreq.h>
-#include <linux/cpumask.h>
-#include <linux/cpu_cooling.h>
-#include <linux/export.h>
-#include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/of_platform.h>
-#include <linux/pm_opp.h>
-#include <linux/slab.h>
-#include <linux/topology.h>
-#include <linux/types.h>
-
-#include "arm_big_little.h"
-
-/* Currently we support only two clusters */
-#define A15_CLUSTER	0
-#define A7_CLUSTER	1
-#define MAX_CLUSTERS	2
-
-#ifdef CONFIG_BL_SWITCHER
-#include <asm/bL_switcher.h>
-static bool bL_switching_enabled;
-#define is_bL_switching_enabled()	bL_switching_enabled
-#define set_switching_enabled(x)	(bL_switching_enabled = (x))
-#else
-#define is_bL_switching_enabled()	false
-#define set_switching_enabled(x)	do { } while (0)
-#define bL_switch_request(...)		do { } while (0)
-#define bL_switcher_put_enabled()	do { } while (0)
-#define bL_switcher_get_enabled()	do { } while (0)
-#endif
-
-#define ACTUAL_FREQ(cluster, freq)  ((cluster == A7_CLUSTER) ? freq << 1 : freq)
-#define VIRT_FREQ(cluster, freq)    ((cluster == A7_CLUSTER) ? freq >> 1 : freq)
-
-static struct thermal_cooling_device *cdev[MAX_CLUSTERS];
-static const struct cpufreq_arm_bL_ops *arm_bL_ops;
-static struct clk *clk[MAX_CLUSTERS];
-static struct cpufreq_frequency_table *freq_table[MAX_CLUSTERS + 1];
-static atomic_t cluster_usage[MAX_CLUSTERS + 1];
-
-static unsigned int clk_big_min;	/* (Big) clock frequencies */
-static unsigned int clk_little_max;	/* Maximum clock frequency (Little) */
-
-static DEFINE_PER_CPU(unsigned int, physical_cluster);
-static DEFINE_PER_CPU(unsigned int, cpu_last_req_freq);
-
-static struct mutex cluster_lock[MAX_CLUSTERS];
-
-static inline int raw_cpu_to_cluster(int cpu)
-{
-	return topology_physical_package_id(cpu);
-}
-
-static inline int cpu_to_cluster(int cpu)
-{
-	return is_bL_switching_enabled() ?
-		MAX_CLUSTERS : raw_cpu_to_cluster(cpu);
-}
-
-static unsigned int find_cluster_maxfreq(int cluster)
-{
-	int j;
-	u32 max_freq = 0, cpu_freq;
-
-	for_each_online_cpu(j) {
-		cpu_freq = per_cpu(cpu_last_req_freq, j);
-
-		if ((cluster == per_cpu(physical_cluster, j)) &&
-				(max_freq < cpu_freq))
-			max_freq = cpu_freq;
-	}
-
-	pr_debug("%s: cluster: %d, max freq: %d\n", __func__, cluster,
-			max_freq);
-
-	return max_freq;
-}
-
-static unsigned int clk_get_cpu_rate(unsigned int cpu)
-{
-	u32 cur_cluster = per_cpu(physical_cluster, cpu);
-	u32 rate = clk_get_rate(clk[cur_cluster]) / 1000;
-
-	/* For switcher we use virtual A7 clock rates */
-	if (is_bL_switching_enabled())
-		rate = VIRT_FREQ(cur_cluster, rate);
-
-	pr_debug("%s: cpu: %d, cluster: %d, freq: %u\n", __func__, cpu,
-			cur_cluster, rate);
-
-	return rate;
-}
-
-static unsigned int bL_cpufreq_get_rate(unsigned int cpu)
-{
-	if (is_bL_switching_enabled()) {
-		pr_debug("%s: freq: %d\n", __func__, per_cpu(cpu_last_req_freq,
-					cpu));
-
-		return per_cpu(cpu_last_req_freq, cpu);
-	} else {
-		return clk_get_cpu_rate(cpu);
-	}
-}
-
-static unsigned int
-bL_cpufreq_set_rate(u32 cpu, u32 old_cluster, u32 new_cluster, u32 rate)
-{
-	u32 new_rate, prev_rate;
-	int ret;
-	bool bLs = is_bL_switching_enabled();
-
-	mutex_lock(&cluster_lock[new_cluster]);
-
-	if (bLs) {
-		prev_rate = per_cpu(cpu_last_req_freq, cpu);
-		per_cpu(cpu_last_req_freq, cpu) = rate;
-		per_cpu(physical_cluster, cpu) = new_cluster;
-
-		new_rate = find_cluster_maxfreq(new_cluster);
-		new_rate = ACTUAL_FREQ(new_cluster, new_rate);
-	} else {
-		new_rate = rate;
-	}
-
-	pr_debug("%s: cpu: %d, old cluster: %d, new cluster: %d, freq: %d\n",
-			__func__, cpu, old_cluster, new_cluster, new_rate);
-
-	ret = clk_set_rate(clk[new_cluster], new_rate * 1000);
-	if (!ret) {
-		/*
-		 * FIXME: clk_set_rate hasn't returned an error here however it
-		 * may be that clk_change_rate failed due to hardware or
-		 * firmware issues and wasn't able to report that due to the
-		 * current design of the clk core layer. To work around this
-		 * problem we will read back the clock rate and check it is
-		 * correct. This needs to be removed once clk core is fixed.
-		 */
-		if (clk_get_rate(clk[new_cluster]) != new_rate * 1000)
-			ret = -EIO;
-	}
-
-	if (WARN_ON(ret)) {
-		pr_err("clk_set_rate failed: %d, new cluster: %d\n", ret,
-				new_cluster);
-		if (bLs) {
-			per_cpu(cpu_last_req_freq, cpu) = prev_rate;
-			per_cpu(physical_cluster, cpu) = old_cluster;
-		}
-
-		mutex_unlock(&cluster_lock[new_cluster]);
-
-		return ret;
-	}
-
-	mutex_unlock(&cluster_lock[new_cluster]);
-
-	/* Recalc freq for old cluster when switching clusters */
-	if (old_cluster != new_cluster) {
-		pr_debug("%s: cpu: %d, old cluster: %d, new cluster: %d\n",
-				__func__, cpu, old_cluster, new_cluster);
-
-		/* Switch cluster */
-		bL_switch_request(cpu, new_cluster);
-
-		mutex_lock(&cluster_lock[old_cluster]);
-
-		/* Set freq of old cluster if there are cpus left on it */
-		new_rate = find_cluster_maxfreq(old_cluster);
-		new_rate = ACTUAL_FREQ(old_cluster, new_rate);
-
-		if (new_rate) {
-			pr_debug("%s: Updating rate of old cluster: %d, to freq: %d\n",
-					__func__, old_cluster, new_rate);
-
-			if (clk_set_rate(clk[old_cluster], new_rate * 1000))
-				pr_err("%s: clk_set_rate failed: %d, old cluster: %d\n",
-						__func__, ret, old_cluster);
-		}
-		mutex_unlock(&cluster_lock[old_cluster]);
-	}
-
-	return 0;
-}
-
-/* Set clock frequency */
-static int bL_cpufreq_set_target(struct cpufreq_policy *policy,
-		unsigned int index)
-{
-	u32 cpu = policy->cpu, cur_cluster, new_cluster, actual_cluster;
-	unsigned int freqs_new;
-	int ret;
-
-	cur_cluster = cpu_to_cluster(cpu);
-	new_cluster = actual_cluster = per_cpu(physical_cluster, cpu);
-
-	freqs_new = freq_table[cur_cluster][index].frequency;
-
-	if (is_bL_switching_enabled()) {
-		if ((actual_cluster == A15_CLUSTER) &&
-				(freqs_new < clk_big_min)) {
-			new_cluster = A7_CLUSTER;
-		} else if ((actual_cluster == A7_CLUSTER) &&
-				(freqs_new > clk_little_max)) {
-			new_cluster = A15_CLUSTER;
-		}
-	}
-
-	ret = bL_cpufreq_set_rate(cpu, actual_cluster, new_cluster, freqs_new);
-
-	if (!ret) {
-		arch_set_freq_scale(policy->related_cpus, freqs_new,
-				    policy->cpuinfo.max_freq);
-	}
-
-	return ret;
-}
-
-static inline u32 get_table_count(struct cpufreq_frequency_table *table)
-{
-	int count;
-
-	for (count = 0; table[count].frequency != CPUFREQ_TABLE_END; count++)
-		;
-
-	return count;
-}
-
-/* get the minimum frequency in the cpufreq_frequency_table */
-static inline u32 get_table_min(struct cpufreq_frequency_table *table)
-{
-	struct cpufreq_frequency_table *pos;
-	uint32_t min_freq = ~0;
-	cpufreq_for_each_entry(pos, table)
-		if (pos->frequency < min_freq)
-			min_freq = pos->frequency;
-	return min_freq;
-}
-
-/* get the maximum frequency in the cpufreq_frequency_table */
-static inline u32 get_table_max(struct cpufreq_frequency_table *table)
-{
-	struct cpufreq_frequency_table *pos;
-	uint32_t max_freq = 0;
-	cpufreq_for_each_entry(pos, table)
-		if (pos->frequency > max_freq)
-			max_freq = pos->frequency;
-	return max_freq;
-}
-
-static int merge_cluster_tables(void)
-{
-	int i, j, k = 0, count = 1;
-	struct cpufreq_frequency_table *table;
-
-	for (i = 0; i < MAX_CLUSTERS; i++)
-		count += get_table_count(freq_table[i]);
-
-	table = kcalloc(count, sizeof(*table), GFP_KERNEL);
-	if (!table)
-		return -ENOMEM;
-
-	freq_table[MAX_CLUSTERS] = table;
-
-	/* Add in reverse order to get freqs in increasing order */
-	for (i = MAX_CLUSTERS - 1; i >= 0; i--) {
-		for (j = 0; freq_table[i][j].frequency != CPUFREQ_TABLE_END;
-				j++) {
-			table[k].frequency = VIRT_FREQ(i,
-					freq_table[i][j].frequency);
-			pr_debug("%s: index: %d, freq: %d\n", __func__, k,
-					table[k].frequency);
-			k++;
-		}
-	}
-
-	table[k].driver_data = k;
-	table[k].frequency = CPUFREQ_TABLE_END;
-
-	pr_debug("%s: End, table: %p, count: %d\n", __func__, table, k);
-
-	return 0;
-}
-
-static void _put_cluster_clk_and_freq_table(struct device *cpu_dev,
-					    const struct cpumask *cpumask)
-{
-	u32 cluster = raw_cpu_to_cluster(cpu_dev->id);
-
-	if (!freq_table[cluster])
-		return;
-
-	clk_put(clk[cluster]);
-	dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table[cluster]);
-	if (arm_bL_ops->free_opp_table)
-		arm_bL_ops->free_opp_table(cpumask);
-	dev_dbg(cpu_dev, "%s: cluster: %d\n", __func__, cluster);
-}
-
-static void put_cluster_clk_and_freq_table(struct device *cpu_dev,
-					   const struct cpumask *cpumask)
-{
-	u32 cluster = cpu_to_cluster(cpu_dev->id);
-	int i;
-
-	if (atomic_dec_return(&cluster_usage[cluster]))
-		return;
-
-	if (cluster < MAX_CLUSTERS)
-		return _put_cluster_clk_and_freq_table(cpu_dev, cpumask);
-
-	for_each_present_cpu(i) {
-		struct device *cdev = get_cpu_device(i);
-		if (!cdev) {
-			pr_err("%s: failed to get cpu%d device\n", __func__, i);
-			return;
-		}
-
-		_put_cluster_clk_and_freq_table(cdev, cpumask);
-	}
-
-	/* free virtual table */
-	kfree(freq_table[cluster]);
-}
-
-static int _get_cluster_clk_and_freq_table(struct device *cpu_dev,
-					   const struct cpumask *cpumask)
-{
-	u32 cluster = raw_cpu_to_cluster(cpu_dev->id);
-	int ret;
-
-	if (freq_table[cluster])
-		return 0;
-
-	ret = arm_bL_ops->init_opp_table(cpumask);
-	if (ret) {
-		dev_err(cpu_dev, "%s: init_opp_table failed, cpu: %d, err: %d\n",
-				__func__, cpu_dev->id, ret);
-		goto out;
-	}
-
-	ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table[cluster]);
-	if (ret) {
-		dev_err(cpu_dev, "%s: failed to init cpufreq table, cpu: %d, err: %d\n",
-				__func__, cpu_dev->id, ret);
-		goto free_opp_table;
-	}
-
-	clk[cluster] = clk_get(cpu_dev, NULL);
-	if (!IS_ERR(clk[cluster])) {
-		dev_dbg(cpu_dev, "%s: clk: %p & freq table: %p, cluster: %d\n",
-				__func__, clk[cluster], freq_table[cluster],
-				cluster);
-		return 0;
-	}
-
-	dev_err(cpu_dev, "%s: Failed to get clk for cpu: %d, cluster: %d\n",
-			__func__, cpu_dev->id, cluster);
-	ret = PTR_ERR(clk[cluster]);
-	dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table[cluster]);
-
-free_opp_table:
-	if (arm_bL_ops->free_opp_table)
-		arm_bL_ops->free_opp_table(cpumask);
-out:
-	dev_err(cpu_dev, "%s: Failed to get data for cluster: %d\n", __func__,
-			cluster);
-	return ret;
-}
-
-static int get_cluster_clk_and_freq_table(struct device *cpu_dev,
-					  const struct cpumask *cpumask)
-{
-	u32 cluster = cpu_to_cluster(cpu_dev->id);
-	int i, ret;
-
-	if (atomic_inc_return(&cluster_usage[cluster]) != 1)
-		return 0;
-
-	if (cluster < MAX_CLUSTERS) {
-		ret = _get_cluster_clk_and_freq_table(cpu_dev, cpumask);
-		if (ret)
-			atomic_dec(&cluster_usage[cluster]);
-		return ret;
-	}
-
-	/*
-	 * Get data for all clusters and fill virtual cluster with a merge of
-	 * both
-	 */
-	for_each_present_cpu(i) {
-		struct device *cdev = get_cpu_device(i);
-		if (!cdev) {
-			pr_err("%s: failed to get cpu%d device\n", __func__, i);
-			return -ENODEV;
-		}
-
-		ret = _get_cluster_clk_and_freq_table(cdev, cpumask);
-		if (ret)
-			goto put_clusters;
-	}
-
-	ret = merge_cluster_tables();
-	if (ret)
-		goto put_clusters;
-
-	/* Assuming 2 cluster, set clk_big_min and clk_little_max */
-	clk_big_min = get_table_min(freq_table[0]);
-	clk_little_max = VIRT_FREQ(1, get_table_max(freq_table[1]));
-
-	pr_debug("%s: cluster: %d, clk_big_min: %d, clk_little_max: %d\n",
-			__func__, cluster, clk_big_min, clk_little_max);
-
-	return 0;
-
-put_clusters:
-	for_each_present_cpu(i) {
-		struct device *cdev = get_cpu_device(i);
-		if (!cdev) {
-			pr_err("%s: failed to get cpu%d device\n", __func__, i);
-			return -ENODEV;
-		}
-
-		_put_cluster_clk_and_freq_table(cdev, cpumask);
-	}
-
-	atomic_dec(&cluster_usage[cluster]);
-
-	return ret;
-}
-
-/* Per-CPU initialization */
-static int bL_cpufreq_init(struct cpufreq_policy *policy)
-{
-	u32 cur_cluster = cpu_to_cluster(policy->cpu);
-	struct device *cpu_dev;
-	int ret;
-
-	cpu_dev = get_cpu_device(policy->cpu);
-	if (!cpu_dev) {
-		pr_err("%s: failed to get cpu%d device\n", __func__,
-				policy->cpu);
-		return -ENODEV;
-	}
-
-	if (cur_cluster < MAX_CLUSTERS) {
-		int cpu;
-
-		cpumask_copy(policy->cpus, topology_core_cpumask(policy->cpu));
-
-		for_each_cpu(cpu, policy->cpus)
-			per_cpu(physical_cluster, cpu) = cur_cluster;
-	} else {
-		/* Assumption: during init, we are always running on A15 */
-		per_cpu(physical_cluster, policy->cpu) = A15_CLUSTER;
-	}
-
-	ret = get_cluster_clk_and_freq_table(cpu_dev, policy->cpus);
-	if (ret)
-		return ret;
-
-	policy->freq_table = freq_table[cur_cluster];
-	policy->cpuinfo.transition_latency =
-				arm_bL_ops->get_transition_latency(cpu_dev);
-
-	dev_pm_opp_of_register_em(policy->cpus);
-
-	if (is_bL_switching_enabled())
-		per_cpu(cpu_last_req_freq, policy->cpu) = clk_get_cpu_rate(policy->cpu);
-
-	dev_info(cpu_dev, "%s: CPU %d initialized\n", __func__, policy->cpu);
-	return 0;
-}
-
-static int bL_cpufreq_exit(struct cpufreq_policy *policy)
-{
-	struct device *cpu_dev;
-	int cur_cluster = cpu_to_cluster(policy->cpu);
-
-	if (cur_cluster < MAX_CLUSTERS) {
-		cpufreq_cooling_unregister(cdev[cur_cluster]);
-		cdev[cur_cluster] = NULL;
-	}
-
-	cpu_dev = get_cpu_device(policy->cpu);
-	if (!cpu_dev) {
-		pr_err("%s: failed to get cpu%d device\n", __func__,
-				policy->cpu);
-		return -ENODEV;
-	}
-
-	put_cluster_clk_and_freq_table(cpu_dev, policy->related_cpus);
-	dev_dbg(cpu_dev, "%s: Exited, cpu: %d\n", __func__, policy->cpu);
-
-	return 0;
-}
-
-static void bL_cpufreq_ready(struct cpufreq_policy *policy)
-{
-	int cur_cluster = cpu_to_cluster(policy->cpu);
-
-	/* Do not register a cpu_cooling device if we are in IKS mode */
-	if (cur_cluster >= MAX_CLUSTERS)
-		return;
-
-	cdev[cur_cluster] = of_cpufreq_cooling_register(policy);
-}
-
-static struct cpufreq_driver bL_cpufreq_driver = {
-	.name			= "arm-big-little",
-	.flags			= CPUFREQ_STICKY |
-					CPUFREQ_HAVE_GOVERNOR_PER_POLICY |
-					CPUFREQ_NEED_INITIAL_FREQ_CHECK,
-	.verify			= cpufreq_generic_frequency_table_verify,
-	.target_index		= bL_cpufreq_set_target,
-	.get			= bL_cpufreq_get_rate,
-	.init			= bL_cpufreq_init,
-	.exit			= bL_cpufreq_exit,
-	.ready			= bL_cpufreq_ready,
-	.attr			= cpufreq_generic_attr,
-};
-
-#ifdef CONFIG_BL_SWITCHER
-static int bL_cpufreq_switcher_notifier(struct notifier_block *nfb,
-					unsigned long action, void *_arg)
-{
-	pr_debug("%s: action: %ld\n", __func__, action);
-
-	switch (action) {
-	case BL_NOTIFY_PRE_ENABLE:
-	case BL_NOTIFY_PRE_DISABLE:
-		cpufreq_unregister_driver(&bL_cpufreq_driver);
-		break;
-
-	case BL_NOTIFY_POST_ENABLE:
-		set_switching_enabled(true);
-		cpufreq_register_driver(&bL_cpufreq_driver);
-		break;
-
-	case BL_NOTIFY_POST_DISABLE:
-		set_switching_enabled(false);
-		cpufreq_register_driver(&bL_cpufreq_driver);
-		break;
-
-	default:
-		return NOTIFY_DONE;
-	}
-
-	return NOTIFY_OK;
-}
-
-static struct notifier_block bL_switcher_notifier = {
-	.notifier_call = bL_cpufreq_switcher_notifier,
-};
-
-static int __bLs_register_notifier(void)
-{
-	return bL_switcher_register_notifier(&bL_switcher_notifier);
-}
-
-static int __bLs_unregister_notifier(void)
-{
-	return bL_switcher_unregister_notifier(&bL_switcher_notifier);
-}
-#else
-static int __bLs_register_notifier(void) { return 0; }
-static int __bLs_unregister_notifier(void) { return 0; }
-#endif
-
-int bL_cpufreq_register(const struct cpufreq_arm_bL_ops *ops)
-{
-	int ret, i;
-
-	if (arm_bL_ops) {
-		pr_debug("%s: Already registered: %s, exiting\n", __func__,
-				arm_bL_ops->name);
-		return -EBUSY;
-	}
-
-	if (!ops || !strlen(ops->name) || !ops->init_opp_table ||
-	    !ops->get_transition_latency) {
-		pr_err("%s: Invalid arm_bL_ops, exiting\n", __func__);
-		return -ENODEV;
-	}
-
-	arm_bL_ops = ops;
-
-	set_switching_enabled(bL_switcher_get_enabled());
-
-	for (i = 0; i < MAX_CLUSTERS; i++)
-		mutex_init(&cluster_lock[i]);
-
-	ret = cpufreq_register_driver(&bL_cpufreq_driver);
-	if (ret) {
-		pr_info("%s: Failed registering platform driver: %s, err: %d\n",
-				__func__, ops->name, ret);
-		arm_bL_ops = NULL;
-	} else {
-		ret = __bLs_register_notifier();
-		if (ret) {
-			cpufreq_unregister_driver(&bL_cpufreq_driver);
-			arm_bL_ops = NULL;
-		} else {
-			pr_info("%s: Registered platform driver: %s\n",
-					__func__, ops->name);
-		}
-	}
-
-	bL_switcher_put_enabled();
-	return ret;
-}
-EXPORT_SYMBOL_GPL(bL_cpufreq_register);
-
-void bL_cpufreq_unregister(const struct cpufreq_arm_bL_ops *ops)
-{
-	if (arm_bL_ops != ops) {
-		pr_err("%s: Registered with: %s, can't unregister, exiting\n",
-				__func__, arm_bL_ops->name);
-		return;
-	}
-
-	bL_switcher_get_enabled();
-	__bLs_unregister_notifier();
-	cpufreq_unregister_driver(&bL_cpufreq_driver);
-	bL_switcher_put_enabled();
-	pr_info("%s: Un-registered platform driver: %s\n", __func__,
-			arm_bL_ops->name);
-	arm_bL_ops = NULL;
-}
-EXPORT_SYMBOL_GPL(bL_cpufreq_unregister);
-
-MODULE_AUTHOR("Viresh Kumar <viresh.kumar@linaro.org>");
-MODULE_DESCRIPTION("Generic ARM big LITTLE cpufreq driver");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/cpufreq/arm_big_little.h b/drivers/cpufreq/arm_big_little.h
deleted file mode 100644
index 88a176e466c87..0000000000000
--- a/drivers/cpufreq/arm_big_little.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * ARM big.LITTLE platform's CPUFreq header file
- *
- * Copyright (C) 2013 ARM Ltd.
- * Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>
- *
- * Copyright (C) 2013 Linaro.
- * Viresh Kumar <viresh.kumar@linaro.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-#ifndef CPUFREQ_ARM_BIG_LITTLE_H
-#define CPUFREQ_ARM_BIG_LITTLE_H
-
-#include <linux/cpufreq.h>
-#include <linux/device.h>
-#include <linux/types.h>
-
-struct cpufreq_arm_bL_ops {
-	char name[CPUFREQ_NAME_LEN];
-
-	/*
-	 * This must set opp table for cpu_dev in a similar way as done by
-	 * dev_pm_opp_of_add_table().
-	 */
-	int (*init_opp_table)(const struct cpumask *cpumask);
-
-	/* Optional */
-	int (*get_transition_latency)(struct device *cpu_dev);
-	void (*free_opp_table)(const struct cpumask *cpumask);
-};
-
-int bL_cpufreq_register(const struct cpufreq_arm_bL_ops *ops);
-void bL_cpufreq_unregister(const struct cpufreq_arm_bL_ops *ops);
-
-#endif /* CPUFREQ_ARM_BIG_LITTLE_H */
diff --git a/drivers/cpufreq/vexpress-spc-cpufreq.c b/drivers/cpufreq/vexpress-spc-cpufreq.c
index 53237289e6060..622dc42e42b10 100644
--- a/drivers/cpufreq/vexpress-spc-cpufreq.c
+++ b/drivers/cpufreq/vexpress-spc-cpufreq.c
@@ -1,31 +1,660 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Versatile Express SPC CPUFreq Interface driver
  *
- * It provides necessary ops to arm_big_little cpufreq driver.
+ * Copyright (C) 2013 - 2019 ARM Ltd.
+ * Sudeep Holla <sudeep.holla@arm.com>
  *
- * Copyright (C) 2013 ARM Ltd.
- * Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
+ * Copyright (C) 2013 Linaro.
+ * Viresh Kumar <viresh.kumar@linaro.org>
  */
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
+#include <linux/clk.h>
 #include <linux/cpu.h>
 #include <linux/cpufreq.h>
+#include <linux/cpumask.h>
+#include <linux/cpu_cooling.h>
+#include <linux/device.h>
 #include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of_platform.h>
 #include <linux/platform_device.h>
 #include <linux/pm_opp.h>
+#include <linux/slab.h>
+#include <linux/topology.h>
 #include <linux/types.h>
 
-#include "arm_big_little.h"
+struct cpufreq_arm_bL_ops {
+	char name[CPUFREQ_NAME_LEN];
+
+	/*
+	 * This must set opp table for cpu_dev in a similar way as done by
+	 * dev_pm_opp_of_add_table().
+	 */
+	int (*init_opp_table)(const struct cpumask *cpumask);
+
+	/* Optional */
+	int (*get_transition_latency)(struct device *cpu_dev);
+	void (*free_opp_table)(const struct cpumask *cpumask);
+};
+
+/* Currently we support only two clusters */
+#define A15_CLUSTER	0
+#define A7_CLUSTER	1
+#define MAX_CLUSTERS	2
+
+#ifdef CONFIG_BL_SWITCHER
+#include <asm/bL_switcher.h>
+static bool bL_switching_enabled;
+#define is_bL_switching_enabled()	bL_switching_enabled
+#define set_switching_enabled(x)	(bL_switching_enabled = (x))
+#else
+#define is_bL_switching_enabled()	false
+#define set_switching_enabled(x)	do { } while (0)
+#define bL_switch_request(...)		do { } while (0)
+#define bL_switcher_put_enabled()	do { } while (0)
+#define bL_switcher_get_enabled()	do { } while (0)
+#endif
+
+#define ACTUAL_FREQ(cluster, freq)  ((cluster == A7_CLUSTER) ? freq << 1 : freq)
+#define VIRT_FREQ(cluster, freq)    ((cluster == A7_CLUSTER) ? freq >> 1 : freq)
+
+static struct thermal_cooling_device *cdev[MAX_CLUSTERS];
+static const struct cpufreq_arm_bL_ops *arm_bL_ops;
+static struct clk *clk[MAX_CLUSTERS];
+static struct cpufreq_frequency_table *freq_table[MAX_CLUSTERS + 1];
+static atomic_t cluster_usage[MAX_CLUSTERS + 1];
+
+static unsigned int clk_big_min;	/* (Big) clock frequencies */
+static unsigned int clk_little_max;	/* Maximum clock frequency (Little) */
+
+static DEFINE_PER_CPU(unsigned int, physical_cluster);
+static DEFINE_PER_CPU(unsigned int, cpu_last_req_freq);
+
+static struct mutex cluster_lock[MAX_CLUSTERS];
+
+static inline int raw_cpu_to_cluster(int cpu)
+{
+	return topology_physical_package_id(cpu);
+}
+
+static inline int cpu_to_cluster(int cpu)
+{
+	return is_bL_switching_enabled() ?
+		MAX_CLUSTERS : raw_cpu_to_cluster(cpu);
+}
+
+static unsigned int find_cluster_maxfreq(int cluster)
+{
+	int j;
+	u32 max_freq = 0, cpu_freq;
+
+	for_each_online_cpu(j) {
+		cpu_freq = per_cpu(cpu_last_req_freq, j);
+
+		if ((cluster == per_cpu(physical_cluster, j)) &&
+				(max_freq < cpu_freq))
+			max_freq = cpu_freq;
+	}
+
+	pr_debug("%s: cluster: %d, max freq: %d\n", __func__, cluster,
+			max_freq);
+
+	return max_freq;
+}
+
+static unsigned int clk_get_cpu_rate(unsigned int cpu)
+{
+	u32 cur_cluster = per_cpu(physical_cluster, cpu);
+	u32 rate = clk_get_rate(clk[cur_cluster]) / 1000;
+
+	/* For switcher we use virtual A7 clock rates */
+	if (is_bL_switching_enabled())
+		rate = VIRT_FREQ(cur_cluster, rate);
+
+	pr_debug("%s: cpu: %d, cluster: %d, freq: %u\n", __func__, cpu,
+			cur_cluster, rate);
+
+	return rate;
+}
+
+static unsigned int bL_cpufreq_get_rate(unsigned int cpu)
+{
+	if (is_bL_switching_enabled()) {
+		pr_debug("%s: freq: %d\n", __func__, per_cpu(cpu_last_req_freq,
+					cpu));
+
+		return per_cpu(cpu_last_req_freq, cpu);
+	} else {
+		return clk_get_cpu_rate(cpu);
+	}
+}
+
+static unsigned int
+bL_cpufreq_set_rate(u32 cpu, u32 old_cluster, u32 new_cluster, u32 rate)
+{
+	u32 new_rate, prev_rate;
+	int ret;
+	bool bLs = is_bL_switching_enabled();
+
+	mutex_lock(&cluster_lock[new_cluster]);
+
+	if (bLs) {
+		prev_rate = per_cpu(cpu_last_req_freq, cpu);
+		per_cpu(cpu_last_req_freq, cpu) = rate;
+		per_cpu(physical_cluster, cpu) = new_cluster;
+
+		new_rate = find_cluster_maxfreq(new_cluster);
+		new_rate = ACTUAL_FREQ(new_cluster, new_rate);
+	} else {
+		new_rate = rate;
+	}
+
+	pr_debug("%s: cpu: %d, old cluster: %d, new cluster: %d, freq: %d\n",
+			__func__, cpu, old_cluster, new_cluster, new_rate);
+
+	ret = clk_set_rate(clk[new_cluster], new_rate * 1000);
+	if (!ret) {
+		/*
+		 * FIXME: clk_set_rate hasn't returned an error here however it
+		 * may be that clk_change_rate failed due to hardware or
+		 * firmware issues and wasn't able to report that due to the
+		 * current design of the clk core layer. To work around this
+		 * problem we will read back the clock rate and check it is
+		 * correct. This needs to be removed once clk core is fixed.
+		 */
+		if (clk_get_rate(clk[new_cluster]) != new_rate * 1000)
+			ret = -EIO;
+	}
+
+	if (WARN_ON(ret)) {
+		pr_err("clk_set_rate failed: %d, new cluster: %d\n", ret,
+				new_cluster);
+		if (bLs) {
+			per_cpu(cpu_last_req_freq, cpu) = prev_rate;
+			per_cpu(physical_cluster, cpu) = old_cluster;
+		}
+
+		mutex_unlock(&cluster_lock[new_cluster]);
+
+		return ret;
+	}
+
+	mutex_unlock(&cluster_lock[new_cluster]);
+
+	/* Recalc freq for old cluster when switching clusters */
+	if (old_cluster != new_cluster) {
+		pr_debug("%s: cpu: %d, old cluster: %d, new cluster: %d\n",
+				__func__, cpu, old_cluster, new_cluster);
+
+		/* Switch cluster */
+		bL_switch_request(cpu, new_cluster);
+
+		mutex_lock(&cluster_lock[old_cluster]);
+
+		/* Set freq of old cluster if there are cpus left on it */
+		new_rate = find_cluster_maxfreq(old_cluster);
+		new_rate = ACTUAL_FREQ(old_cluster, new_rate);
+
+		if (new_rate) {
+			pr_debug("%s: Updating rate of old cluster: %d, to freq: %d\n",
+					__func__, old_cluster, new_rate);
+
+			if (clk_set_rate(clk[old_cluster], new_rate * 1000))
+				pr_err("%s: clk_set_rate failed: %d, old cluster: %d\n",
+						__func__, ret, old_cluster);
+		}
+		mutex_unlock(&cluster_lock[old_cluster]);
+	}
+
+	return 0;
+}
+
+/* Set clock frequency */
+static int bL_cpufreq_set_target(struct cpufreq_policy *policy,
+		unsigned int index)
+{
+	u32 cpu = policy->cpu, cur_cluster, new_cluster, actual_cluster;
+	unsigned int freqs_new;
+	int ret;
+
+	cur_cluster = cpu_to_cluster(cpu);
+	new_cluster = actual_cluster = per_cpu(physical_cluster, cpu);
+
+	freqs_new = freq_table[cur_cluster][index].frequency;
+
+	if (is_bL_switching_enabled()) {
+		if ((actual_cluster == A15_CLUSTER) &&
+				(freqs_new < clk_big_min)) {
+			new_cluster = A7_CLUSTER;
+		} else if ((actual_cluster == A7_CLUSTER) &&
+				(freqs_new > clk_little_max)) {
+			new_cluster = A15_CLUSTER;
+		}
+	}
+
+	ret = bL_cpufreq_set_rate(cpu, actual_cluster, new_cluster, freqs_new);
+
+	if (!ret) {
+		arch_set_freq_scale(policy->related_cpus, freqs_new,
+				    policy->cpuinfo.max_freq);
+	}
+
+	return ret;
+}
+
+static inline u32 get_table_count(struct cpufreq_frequency_table *table)
+{
+	int count;
+
+	for (count = 0; table[count].frequency != CPUFREQ_TABLE_END; count++)
+		;
+
+	return count;
+}
+
+/* get the minimum frequency in the cpufreq_frequency_table */
+static inline u32 get_table_min(struct cpufreq_frequency_table *table)
+{
+	struct cpufreq_frequency_table *pos;
+	uint32_t min_freq = ~0;
+	cpufreq_for_each_entry(pos, table)
+		if (pos->frequency < min_freq)
+			min_freq = pos->frequency;
+	return min_freq;
+}
+
+/* get the maximum frequency in the cpufreq_frequency_table */
+static inline u32 get_table_max(struct cpufreq_frequency_table *table)
+{
+	struct cpufreq_frequency_table *pos;
+	uint32_t max_freq = 0;
+	cpufreq_for_each_entry(pos, table)
+		if (pos->frequency > max_freq)
+			max_freq = pos->frequency;
+	return max_freq;
+}
+
+static int merge_cluster_tables(void)
+{
+	int i, j, k = 0, count = 1;
+	struct cpufreq_frequency_table *table;
+
+	for (i = 0; i < MAX_CLUSTERS; i++)
+		count += get_table_count(freq_table[i]);
+
+	table = kcalloc(count, sizeof(*table), GFP_KERNEL);
+	if (!table)
+		return -ENOMEM;
+
+	freq_table[MAX_CLUSTERS] = table;
+
+	/* Add in reverse order to get freqs in increasing order */
+	for (i = MAX_CLUSTERS - 1; i >= 0; i--) {
+		for (j = 0; freq_table[i][j].frequency != CPUFREQ_TABLE_END;
+				j++) {
+			table[k].frequency = VIRT_FREQ(i,
+					freq_table[i][j].frequency);
+			pr_debug("%s: index: %d, freq: %d\n", __func__, k,
+					table[k].frequency);
+			k++;
+		}
+	}
+
+	table[k].driver_data = k;
+	table[k].frequency = CPUFREQ_TABLE_END;
+
+	pr_debug("%s: End, table: %p, count: %d\n", __func__, table, k);
+
+	return 0;
+}
+
+static void _put_cluster_clk_and_freq_table(struct device *cpu_dev,
+					    const struct cpumask *cpumask)
+{
+	u32 cluster = raw_cpu_to_cluster(cpu_dev->id);
+
+	if (!freq_table[cluster])
+		return;
+
+	clk_put(clk[cluster]);
+	dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table[cluster]);
+	if (arm_bL_ops->free_opp_table)
+		arm_bL_ops->free_opp_table(cpumask);
+	dev_dbg(cpu_dev, "%s: cluster: %d\n", __func__, cluster);
+}
+
+static void put_cluster_clk_and_freq_table(struct device *cpu_dev,
+					   const struct cpumask *cpumask)
+{
+	u32 cluster = cpu_to_cluster(cpu_dev->id);
+	int i;
+
+	if (atomic_dec_return(&cluster_usage[cluster]))
+		return;
+
+	if (cluster < MAX_CLUSTERS)
+		return _put_cluster_clk_and_freq_table(cpu_dev, cpumask);
+
+	for_each_present_cpu(i) {
+		struct device *cdev = get_cpu_device(i);
+		if (!cdev) {
+			pr_err("%s: failed to get cpu%d device\n", __func__, i);
+			return;
+		}
+
+		_put_cluster_clk_and_freq_table(cdev, cpumask);
+	}
+
+	/* free virtual table */
+	kfree(freq_table[cluster]);
+}
+
+static int _get_cluster_clk_and_freq_table(struct device *cpu_dev,
+					   const struct cpumask *cpumask)
+{
+	u32 cluster = raw_cpu_to_cluster(cpu_dev->id);
+	int ret;
+
+	if (freq_table[cluster])
+		return 0;
+
+	ret = arm_bL_ops->init_opp_table(cpumask);
+	if (ret) {
+		dev_err(cpu_dev, "%s: init_opp_table failed, cpu: %d, err: %d\n",
+				__func__, cpu_dev->id, ret);
+		goto out;
+	}
+
+	ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table[cluster]);
+	if (ret) {
+		dev_err(cpu_dev, "%s: failed to init cpufreq table, cpu: %d, err: %d\n",
+				__func__, cpu_dev->id, ret);
+		goto free_opp_table;
+	}
+
+	clk[cluster] = clk_get(cpu_dev, NULL);
+	if (!IS_ERR(clk[cluster])) {
+		dev_dbg(cpu_dev, "%s: clk: %p & freq table: %p, cluster: %d\n",
+				__func__, clk[cluster], freq_table[cluster],
+				cluster);
+		return 0;
+	}
+
+	dev_err(cpu_dev, "%s: Failed to get clk for cpu: %d, cluster: %d\n",
+			__func__, cpu_dev->id, cluster);
+	ret = PTR_ERR(clk[cluster]);
+	dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table[cluster]);
+
+free_opp_table:
+	if (arm_bL_ops->free_opp_table)
+		arm_bL_ops->free_opp_table(cpumask);
+out:
+	dev_err(cpu_dev, "%s: Failed to get data for cluster: %d\n", __func__,
+			cluster);
+	return ret;
+}
+
+static int get_cluster_clk_and_freq_table(struct device *cpu_dev,
+					  const struct cpumask *cpumask)
+{
+	u32 cluster = cpu_to_cluster(cpu_dev->id);
+	int i, ret;
+
+	if (atomic_inc_return(&cluster_usage[cluster]) != 1)
+		return 0;
+
+	if (cluster < MAX_CLUSTERS) {
+		ret = _get_cluster_clk_and_freq_table(cpu_dev, cpumask);
+		if (ret)
+			atomic_dec(&cluster_usage[cluster]);
+		return ret;
+	}
+
+	/*
+	 * Get data for all clusters and fill virtual cluster with a merge of
+	 * both
+	 */
+	for_each_present_cpu(i) {
+		struct device *cdev = get_cpu_device(i);
+		if (!cdev) {
+			pr_err("%s: failed to get cpu%d device\n", __func__, i);
+			return -ENODEV;
+		}
+
+		ret = _get_cluster_clk_and_freq_table(cdev, cpumask);
+		if (ret)
+			goto put_clusters;
+	}
+
+	ret = merge_cluster_tables();
+	if (ret)
+		goto put_clusters;
+
+	/* Assuming 2 cluster, set clk_big_min and clk_little_max */
+	clk_big_min = get_table_min(freq_table[0]);
+	clk_little_max = VIRT_FREQ(1, get_table_max(freq_table[1]));
+
+	pr_debug("%s: cluster: %d, clk_big_min: %d, clk_little_max: %d\n",
+			__func__, cluster, clk_big_min, clk_little_max);
+
+	return 0;
+
+put_clusters:
+	for_each_present_cpu(i) {
+		struct device *cdev = get_cpu_device(i);
+		if (!cdev) {
+			pr_err("%s: failed to get cpu%d device\n", __func__, i);
+			return -ENODEV;
+		}
+
+		_put_cluster_clk_and_freq_table(cdev, cpumask);
+	}
+
+	atomic_dec(&cluster_usage[cluster]);
+
+	return ret;
+}
+
+/* Per-CPU initialization */
+static int bL_cpufreq_init(struct cpufreq_policy *policy)
+{
+	u32 cur_cluster = cpu_to_cluster(policy->cpu);
+	struct device *cpu_dev;
+	int ret;
+
+	cpu_dev = get_cpu_device(policy->cpu);
+	if (!cpu_dev) {
+		pr_err("%s: failed to get cpu%d device\n", __func__,
+				policy->cpu);
+		return -ENODEV;
+	}
+
+	if (cur_cluster < MAX_CLUSTERS) {
+		int cpu;
+
+		cpumask_copy(policy->cpus, topology_core_cpumask(policy->cpu));
+
+		for_each_cpu(cpu, policy->cpus)
+			per_cpu(physical_cluster, cpu) = cur_cluster;
+	} else {
+		/* Assumption: during init, we are always running on A15 */
+		per_cpu(physical_cluster, policy->cpu) = A15_CLUSTER;
+	}
+
+	ret = get_cluster_clk_and_freq_table(cpu_dev, policy->cpus);
+	if (ret)
+		return ret;
+
+	policy->freq_table = freq_table[cur_cluster];
+	policy->cpuinfo.transition_latency =
+				arm_bL_ops->get_transition_latency(cpu_dev);
+
+	dev_pm_opp_of_register_em(policy->cpus);
+
+	if (is_bL_switching_enabled())
+		per_cpu(cpu_last_req_freq, policy->cpu) = clk_get_cpu_rate(policy->cpu);
+
+	dev_info(cpu_dev, "%s: CPU %d initialized\n", __func__, policy->cpu);
+	return 0;
+}
+
+static int bL_cpufreq_exit(struct cpufreq_policy *policy)
+{
+	struct device *cpu_dev;
+	int cur_cluster = cpu_to_cluster(policy->cpu);
+
+	if (cur_cluster < MAX_CLUSTERS) {
+		cpufreq_cooling_unregister(cdev[cur_cluster]);
+		cdev[cur_cluster] = NULL;
+	}
+
+	cpu_dev = get_cpu_device(policy->cpu);
+	if (!cpu_dev) {
+		pr_err("%s: failed to get cpu%d device\n", __func__,
+				policy->cpu);
+		return -ENODEV;
+	}
+
+	put_cluster_clk_and_freq_table(cpu_dev, policy->related_cpus);
+	dev_dbg(cpu_dev, "%s: Exited, cpu: %d\n", __func__, policy->cpu);
+
+	return 0;
+}
+
+static void bL_cpufreq_ready(struct cpufreq_policy *policy)
+{
+	int cur_cluster = cpu_to_cluster(policy->cpu);
+
+	/* Do not register a cpu_cooling device if we are in IKS mode */
+	if (cur_cluster >= MAX_CLUSTERS)
+		return;
+
+	cdev[cur_cluster] = of_cpufreq_cooling_register(policy);
+}
+
+static struct cpufreq_driver bL_cpufreq_driver = {
+	.name			= "arm-big-little",
+	.flags			= CPUFREQ_STICKY |
+					CPUFREQ_HAVE_GOVERNOR_PER_POLICY |
+					CPUFREQ_NEED_INITIAL_FREQ_CHECK,
+	.verify			= cpufreq_generic_frequency_table_verify,
+	.target_index		= bL_cpufreq_set_target,
+	.get			= bL_cpufreq_get_rate,
+	.init			= bL_cpufreq_init,
+	.exit			= bL_cpufreq_exit,
+	.ready			= bL_cpufreq_ready,
+	.attr			= cpufreq_generic_attr,
+};
+
+#ifdef CONFIG_BL_SWITCHER
+static int bL_cpufreq_switcher_notifier(struct notifier_block *nfb,
+					unsigned long action, void *_arg)
+{
+	pr_debug("%s: action: %ld\n", __func__, action);
+
+	switch (action) {
+	case BL_NOTIFY_PRE_ENABLE:
+	case BL_NOTIFY_PRE_DISABLE:
+		cpufreq_unregister_driver(&bL_cpufreq_driver);
+		break;
+
+	case BL_NOTIFY_POST_ENABLE:
+		set_switching_enabled(true);
+		cpufreq_register_driver(&bL_cpufreq_driver);
+		break;
+
+	case BL_NOTIFY_POST_DISABLE:
+		set_switching_enabled(false);
+		cpufreq_register_driver(&bL_cpufreq_driver);
+		break;
+
+	default:
+		return NOTIFY_DONE;
+	}
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block bL_switcher_notifier = {
+	.notifier_call = bL_cpufreq_switcher_notifier,
+};
+
+static int __bLs_register_notifier(void)
+{
+	return bL_switcher_register_notifier(&bL_switcher_notifier);
+}
+
+static int __bLs_unregister_notifier(void)
+{
+	return bL_switcher_unregister_notifier(&bL_switcher_notifier);
+}
+#else
+static int __bLs_register_notifier(void) { return 0; }
+static int __bLs_unregister_notifier(void) { return 0; }
+#endif
+
+int bL_cpufreq_register(const struct cpufreq_arm_bL_ops *ops)
+{
+	int ret, i;
+
+	if (arm_bL_ops) {
+		pr_debug("%s: Already registered: %s, exiting\n", __func__,
+				arm_bL_ops->name);
+		return -EBUSY;
+	}
+
+	if (!ops || !strlen(ops->name) || !ops->init_opp_table ||
+	    !ops->get_transition_latency) {
+		pr_err("%s: Invalid arm_bL_ops, exiting\n", __func__);
+		return -ENODEV;
+	}
+
+	arm_bL_ops = ops;
+
+	set_switching_enabled(bL_switcher_get_enabled());
+
+	for (i = 0; i < MAX_CLUSTERS; i++)
+		mutex_init(&cluster_lock[i]);
+
+	ret = cpufreq_register_driver(&bL_cpufreq_driver);
+	if (ret) {
+		pr_info("%s: Failed registering platform driver: %s, err: %d\n",
+				__func__, ops->name, ret);
+		arm_bL_ops = NULL;
+	} else {
+		ret = __bLs_register_notifier();
+		if (ret) {
+			cpufreq_unregister_driver(&bL_cpufreq_driver);
+			arm_bL_ops = NULL;
+		} else {
+			pr_info("%s: Registered platform driver: %s\n",
+					__func__, ops->name);
+		}
+	}
+
+	bL_switcher_put_enabled();
+	return ret;
+}
+
+void bL_cpufreq_unregister(const struct cpufreq_arm_bL_ops *ops)
+{
+	if (arm_bL_ops != ops) {
+		pr_err("%s: Registered with: %s, can't unregister, exiting\n",
+				__func__, arm_bL_ops->name);
+		return;
+	}
+
+	bL_switcher_get_enabled();
+	__bLs_unregister_notifier();
+	cpufreq_unregister_driver(&bL_cpufreq_driver);
+	bL_switcher_put_enabled();
+	pr_info("%s: Un-registered platform driver: %s\n", __func__,
+			arm_bL_ops->name);
+	arm_bL_ops = NULL;
+}
 
 static int ve_spc_init_opp_table(const struct cpumask *cpumask)
 {
@@ -68,4 +697,7 @@ static struct platform_driver ve_spc_cpufreq_platdrv = {
 };
 module_platform_driver(ve_spc_cpufreq_platdrv);
 
-MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Viresh Kumar <viresh.kumar@linaro.org>");
+MODULE_AUTHOR("Sudeep Holla <sudeep.holla@arm.com>");
+MODULE_DESCRIPTION("Vexpress SPC ARM big LITTLE cpufreq driver");
+MODULE_LICENSE("GPL v2");

From 1f1b4650e0be8178fa303a78889ceda6b4385223 Mon Sep 17 00:00:00 2001
From: Sudeep Holla <sudeep.holla@arm.com>
Date: Fri, 18 Oct 2019 11:37:47 +0100
Subject: [PATCH 11/18] cpufreq: vexpress-spc: drop unnessary
 cpufreq_arm_bL_ops abstraction

cpufreq_arm_bL_ops is no longer needed after merging the generic
arm_big_little and vexpress-spc driver. Remove it along with the
unused bL_cpufreq_{,un}register routines and rename some bL_*
functions to ve_spc_*.

Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 drivers/cpufreq/vexpress-spc-cpufreq.c | 148 +++++++------------------
 1 file changed, 37 insertions(+), 111 deletions(-)

diff --git a/drivers/cpufreq/vexpress-spc-cpufreq.c b/drivers/cpufreq/vexpress-spc-cpufreq.c
index 622dc42e42b10..3eaeefea66b9d 100644
--- a/drivers/cpufreq/vexpress-spc-cpufreq.c
+++ b/drivers/cpufreq/vexpress-spc-cpufreq.c
@@ -26,20 +26,6 @@
 #include <linux/topology.h>
 #include <linux/types.h>
 
-struct cpufreq_arm_bL_ops {
-	char name[CPUFREQ_NAME_LEN];
-
-	/*
-	 * This must set opp table for cpu_dev in a similar way as done by
-	 * dev_pm_opp_of_add_table().
-	 */
-	int (*init_opp_table)(const struct cpumask *cpumask);
-
-	/* Optional */
-	int (*get_transition_latency)(struct device *cpu_dev);
-	void (*free_opp_table)(const struct cpumask *cpumask);
-};
-
 /* Currently we support only two clusters */
 #define A15_CLUSTER	0
 #define A7_CLUSTER	1
@@ -62,7 +48,6 @@ static bool bL_switching_enabled;
 #define VIRT_FREQ(cluster, freq)    ((cluster == A7_CLUSTER) ? freq >> 1 : freq)
 
 static struct thermal_cooling_device *cdev[MAX_CLUSTERS];
-static const struct cpufreq_arm_bL_ops *arm_bL_ops;
 static struct clk *clk[MAX_CLUSTERS];
 static struct cpufreq_frequency_table *freq_table[MAX_CLUSTERS + 1];
 static atomic_t cluster_usage[MAX_CLUSTERS + 1];
@@ -120,7 +105,7 @@ static unsigned int clk_get_cpu_rate(unsigned int cpu)
 	return rate;
 }
 
-static unsigned int bL_cpufreq_get_rate(unsigned int cpu)
+static unsigned int ve_spc_cpufreq_get_rate(unsigned int cpu)
 {
 	if (is_bL_switching_enabled()) {
 		pr_debug("%s: freq: %d\n", __func__, per_cpu(cpu_last_req_freq,
@@ -133,7 +118,7 @@ static unsigned int bL_cpufreq_get_rate(unsigned int cpu)
 }
 
 static unsigned int
-bL_cpufreq_set_rate(u32 cpu, u32 old_cluster, u32 new_cluster, u32 rate)
+ve_spc_cpufreq_set_rate(u32 cpu, u32 old_cluster, u32 new_cluster, u32 rate)
 {
 	u32 new_rate, prev_rate;
 	int ret;
@@ -213,8 +198,8 @@ bL_cpufreq_set_rate(u32 cpu, u32 old_cluster, u32 new_cluster, u32 rate)
 }
 
 /* Set clock frequency */
-static int bL_cpufreq_set_target(struct cpufreq_policy *policy,
-		unsigned int index)
+static int ve_spc_cpufreq_set_target(struct cpufreq_policy *policy,
+				     unsigned int index)
 {
 	u32 cpu = policy->cpu, cur_cluster, new_cluster, actual_cluster;
 	unsigned int freqs_new;
@@ -235,7 +220,8 @@ static int bL_cpufreq_set_target(struct cpufreq_policy *policy,
 		}
 	}
 
-	ret = bL_cpufreq_set_rate(cpu, actual_cluster, new_cluster, freqs_new);
+	ret = ve_spc_cpufreq_set_rate(cpu, actual_cluster, new_cluster,
+				      freqs_new);
 
 	if (!ret) {
 		arch_set_freq_scale(policy->related_cpus, freqs_new,
@@ -321,8 +307,6 @@ static void _put_cluster_clk_and_freq_table(struct device *cpu_dev,
 
 	clk_put(clk[cluster]);
 	dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table[cluster]);
-	if (arm_bL_ops->free_opp_table)
-		arm_bL_ops->free_opp_table(cpumask);
 	dev_dbg(cpu_dev, "%s: cluster: %d\n", __func__, cluster);
 }
 
@@ -361,18 +345,19 @@ static int _get_cluster_clk_and_freq_table(struct device *cpu_dev,
 	if (freq_table[cluster])
 		return 0;
 
-	ret = arm_bL_ops->init_opp_table(cpumask);
-	if (ret) {
-		dev_err(cpu_dev, "%s: init_opp_table failed, cpu: %d, err: %d\n",
-				__func__, cpu_dev->id, ret);
+	/*
+	 * platform specific SPC code must initialise the opp table
+	 * so just check if the OPP count is non-zero
+	 */
+	ret = dev_pm_opp_get_opp_count(cpu_dev) <= 0;
+	if (ret)
 		goto out;
-	}
 
 	ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table[cluster]);
 	if (ret) {
 		dev_err(cpu_dev, "%s: failed to init cpufreq table, cpu: %d, err: %d\n",
 				__func__, cpu_dev->id, ret);
-		goto free_opp_table;
+		goto out;
 	}
 
 	clk[cluster] = clk_get(cpu_dev, NULL);
@@ -388,9 +373,6 @@ static int _get_cluster_clk_and_freq_table(struct device *cpu_dev,
 	ret = PTR_ERR(clk[cluster]);
 	dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table[cluster]);
 
-free_opp_table:
-	if (arm_bL_ops->free_opp_table)
-		arm_bL_ops->free_opp_table(cpumask);
 out:
 	dev_err(cpu_dev, "%s: Failed to get data for cluster: %d\n", __func__,
 			cluster);
@@ -459,7 +441,7 @@ static int get_cluster_clk_and_freq_table(struct device *cpu_dev,
 }
 
 /* Per-CPU initialization */
-static int bL_cpufreq_init(struct cpufreq_policy *policy)
+static int ve_spc_cpufreq_init(struct cpufreq_policy *policy)
 {
 	u32 cur_cluster = cpu_to_cluster(policy->cpu);
 	struct device *cpu_dev;
@@ -489,8 +471,7 @@ static int bL_cpufreq_init(struct cpufreq_policy *policy)
 		return ret;
 
 	policy->freq_table = freq_table[cur_cluster];
-	policy->cpuinfo.transition_latency =
-				arm_bL_ops->get_transition_latency(cpu_dev);
+	policy->cpuinfo.transition_latency = 1000000; /* 1 ms */
 
 	dev_pm_opp_of_register_em(policy->cpus);
 
@@ -501,7 +482,7 @@ static int bL_cpufreq_init(struct cpufreq_policy *policy)
 	return 0;
 }
 
-static int bL_cpufreq_exit(struct cpufreq_policy *policy)
+static int ve_spc_cpufreq_exit(struct cpufreq_policy *policy)
 {
 	struct device *cpu_dev;
 	int cur_cluster = cpu_to_cluster(policy->cpu);
@@ -524,7 +505,7 @@ static int bL_cpufreq_exit(struct cpufreq_policy *policy)
 	return 0;
 }
 
-static void bL_cpufreq_ready(struct cpufreq_policy *policy)
+static void ve_spc_cpufreq_ready(struct cpufreq_policy *policy)
 {
 	int cur_cluster = cpu_to_cluster(policy->cpu);
 
@@ -535,17 +516,17 @@ static void bL_cpufreq_ready(struct cpufreq_policy *policy)
 	cdev[cur_cluster] = of_cpufreq_cooling_register(policy);
 }
 
-static struct cpufreq_driver bL_cpufreq_driver = {
-	.name			= "arm-big-little",
+static struct cpufreq_driver ve_spc_cpufreq_driver = {
+	.name			= "vexpress-spc",
 	.flags			= CPUFREQ_STICKY |
 					CPUFREQ_HAVE_GOVERNOR_PER_POLICY |
 					CPUFREQ_NEED_INITIAL_FREQ_CHECK,
 	.verify			= cpufreq_generic_frequency_table_verify,
-	.target_index		= bL_cpufreq_set_target,
-	.get			= bL_cpufreq_get_rate,
-	.init			= bL_cpufreq_init,
-	.exit			= bL_cpufreq_exit,
-	.ready			= bL_cpufreq_ready,
+	.target_index		= ve_spc_cpufreq_set_target,
+	.get			= ve_spc_cpufreq_get_rate,
+	.init			= ve_spc_cpufreq_init,
+	.exit			= ve_spc_cpufreq_exit,
+	.ready			= ve_spc_cpufreq_ready,
 	.attr			= cpufreq_generic_attr,
 };
 
@@ -558,17 +539,17 @@ static int bL_cpufreq_switcher_notifier(struct notifier_block *nfb,
 	switch (action) {
 	case BL_NOTIFY_PRE_ENABLE:
 	case BL_NOTIFY_PRE_DISABLE:
-		cpufreq_unregister_driver(&bL_cpufreq_driver);
+		cpufreq_unregister_driver(&ve_spc_cpufreq_driver);
 		break;
 
 	case BL_NOTIFY_POST_ENABLE:
 		set_switching_enabled(true);
-		cpufreq_register_driver(&bL_cpufreq_driver);
+		cpufreq_register_driver(&ve_spc_cpufreq_driver);
 		break;
 
 	case BL_NOTIFY_POST_DISABLE:
 		set_switching_enabled(false);
-		cpufreq_register_driver(&bL_cpufreq_driver);
+		cpufreq_register_driver(&ve_spc_cpufreq_driver);
 		break;
 
 	default:
@@ -596,95 +577,40 @@ static int __bLs_register_notifier(void) { return 0; }
 static int __bLs_unregister_notifier(void) { return 0; }
 #endif
 
-int bL_cpufreq_register(const struct cpufreq_arm_bL_ops *ops)
+static int ve_spc_cpufreq_probe(struct platform_device *pdev)
 {
 	int ret, i;
 
-	if (arm_bL_ops) {
-		pr_debug("%s: Already registered: %s, exiting\n", __func__,
-				arm_bL_ops->name);
-		return -EBUSY;
-	}
-
-	if (!ops || !strlen(ops->name) || !ops->init_opp_table ||
-	    !ops->get_transition_latency) {
-		pr_err("%s: Invalid arm_bL_ops, exiting\n", __func__);
-		return -ENODEV;
-	}
-
-	arm_bL_ops = ops;
-
 	set_switching_enabled(bL_switcher_get_enabled());
 
 	for (i = 0; i < MAX_CLUSTERS; i++)
 		mutex_init(&cluster_lock[i]);
 
-	ret = cpufreq_register_driver(&bL_cpufreq_driver);
+	ret = cpufreq_register_driver(&ve_spc_cpufreq_driver);
 	if (ret) {
 		pr_info("%s: Failed registering platform driver: %s, err: %d\n",
-				__func__, ops->name, ret);
-		arm_bL_ops = NULL;
+			__func__, ve_spc_cpufreq_driver.name, ret);
 	} else {
 		ret = __bLs_register_notifier();
-		if (ret) {
-			cpufreq_unregister_driver(&bL_cpufreq_driver);
-			arm_bL_ops = NULL;
-		} else {
+		if (ret)
+			cpufreq_unregister_driver(&ve_spc_cpufreq_driver);
+		else
 			pr_info("%s: Registered platform driver: %s\n",
-					__func__, ops->name);
-		}
+				__func__, ve_spc_cpufreq_driver.name);
 	}
 
 	bL_switcher_put_enabled();
 	return ret;
 }
 
-void bL_cpufreq_unregister(const struct cpufreq_arm_bL_ops *ops)
+static int ve_spc_cpufreq_remove(struct platform_device *pdev)
 {
-	if (arm_bL_ops != ops) {
-		pr_err("%s: Registered with: %s, can't unregister, exiting\n",
-				__func__, arm_bL_ops->name);
-		return;
-	}
-
 	bL_switcher_get_enabled();
 	__bLs_unregister_notifier();
-	cpufreq_unregister_driver(&bL_cpufreq_driver);
+	cpufreq_unregister_driver(&ve_spc_cpufreq_driver);
 	bL_switcher_put_enabled();
 	pr_info("%s: Un-registered platform driver: %s\n", __func__,
-			arm_bL_ops->name);
-	arm_bL_ops = NULL;
-}
-
-static int ve_spc_init_opp_table(const struct cpumask *cpumask)
-{
-	struct device *cpu_dev = get_cpu_device(cpumask_first(cpumask));
-	/*
-	 * platform specific SPC code must initialise the opp table
-	 * so just check if the OPP count is non-zero
-	 */
-	return dev_pm_opp_get_opp_count(cpu_dev) <= 0;
-}
-
-static int ve_spc_get_transition_latency(struct device *cpu_dev)
-{
-	return 1000000; /* 1 ms */
-}
-
-static const struct cpufreq_arm_bL_ops ve_spc_cpufreq_ops = {
-	.name	= "vexpress-spc",
-	.get_transition_latency = ve_spc_get_transition_latency,
-	.init_opp_table = ve_spc_init_opp_table,
-};
-
-static int ve_spc_cpufreq_probe(struct platform_device *pdev)
-{
-	return bL_cpufreq_register(&ve_spc_cpufreq_ops);
-}
-
-static int ve_spc_cpufreq_remove(struct platform_device *pdev)
-{
-	bL_cpufreq_unregister(&ve_spc_cpufreq_ops);
+		ve_spc_cpufreq_driver.name);
 	return 0;
 }
 

From 09402d5725bf8c521cbe162e1037f19b30e2afaa Mon Sep 17 00:00:00 2001
From: Sudeep Holla <sudeep.holla@arm.com>
Date: Fri, 18 Oct 2019 11:37:48 +0100
Subject: [PATCH 12/18] cpufreq: vexpress-spc: remove lots of debug messages

This driver have been used and tested for year now and the extensive
debug/log messages in the driver are not really required anymore.
Get rid of those unnecessary log messages.

Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 drivers/cpufreq/vexpress-spc-cpufreq.c | 69 ++++++--------------------
 1 file changed, 14 insertions(+), 55 deletions(-)

diff --git a/drivers/cpufreq/vexpress-spc-cpufreq.c b/drivers/cpufreq/vexpress-spc-cpufreq.c
index 3eaeefea66b9d..1326104247471 100644
--- a/drivers/cpufreq/vexpress-spc-cpufreq.c
+++ b/drivers/cpufreq/vexpress-spc-cpufreq.c
@@ -84,9 +84,6 @@ static unsigned int find_cluster_maxfreq(int cluster)
 			max_freq = cpu_freq;
 	}
 
-	pr_debug("%s: cluster: %d, max freq: %d\n", __func__, cluster,
-			max_freq);
-
 	return max_freq;
 }
 
@@ -99,22 +96,15 @@ static unsigned int clk_get_cpu_rate(unsigned int cpu)
 	if (is_bL_switching_enabled())
 		rate = VIRT_FREQ(cur_cluster, rate);
 
-	pr_debug("%s: cpu: %d, cluster: %d, freq: %u\n", __func__, cpu,
-			cur_cluster, rate);
-
 	return rate;
 }
 
 static unsigned int ve_spc_cpufreq_get_rate(unsigned int cpu)
 {
-	if (is_bL_switching_enabled()) {
-		pr_debug("%s: freq: %d\n", __func__, per_cpu(cpu_last_req_freq,
-					cpu));
-
+	if (is_bL_switching_enabled())
 		return per_cpu(cpu_last_req_freq, cpu);
-	} else {
+	else
 		return clk_get_cpu_rate(cpu);
-	}
 }
 
 static unsigned int
@@ -137,9 +127,6 @@ ve_spc_cpufreq_set_rate(u32 cpu, u32 old_cluster, u32 new_cluster, u32 rate)
 		new_rate = rate;
 	}
 
-	pr_debug("%s: cpu: %d, old cluster: %d, new cluster: %d, freq: %d\n",
-			__func__, cpu, old_cluster, new_cluster, new_rate);
-
 	ret = clk_set_rate(clk[new_cluster], new_rate * 1000);
 	if (!ret) {
 		/*
@@ -155,8 +142,6 @@ ve_spc_cpufreq_set_rate(u32 cpu, u32 old_cluster, u32 new_cluster, u32 rate)
 	}
 
 	if (WARN_ON(ret)) {
-		pr_err("clk_set_rate failed: %d, new cluster: %d\n", ret,
-				new_cluster);
 		if (bLs) {
 			per_cpu(cpu_last_req_freq, cpu) = prev_rate;
 			per_cpu(physical_cluster, cpu) = old_cluster;
@@ -171,9 +156,6 @@ ve_spc_cpufreq_set_rate(u32 cpu, u32 old_cluster, u32 new_cluster, u32 rate)
 
 	/* Recalc freq for old cluster when switching clusters */
 	if (old_cluster != new_cluster) {
-		pr_debug("%s: cpu: %d, old cluster: %d, new cluster: %d\n",
-				__func__, cpu, old_cluster, new_cluster);
-
 		/* Switch cluster */
 		bL_switch_request(cpu, new_cluster);
 
@@ -183,13 +165,10 @@ ve_spc_cpufreq_set_rate(u32 cpu, u32 old_cluster, u32 new_cluster, u32 rate)
 		new_rate = find_cluster_maxfreq(old_cluster);
 		new_rate = ACTUAL_FREQ(old_cluster, new_rate);
 
-		if (new_rate) {
-			pr_debug("%s: Updating rate of old cluster: %d, to freq: %d\n",
-					__func__, old_cluster, new_rate);
-
-			if (clk_set_rate(clk[old_cluster], new_rate * 1000))
-				pr_err("%s: clk_set_rate failed: %d, old cluster: %d\n",
-						__func__, ret, old_cluster);
+		if (new_rate &&
+		    clk_set_rate(clk[old_cluster], new_rate * 1000)) {
+			pr_err("%s: clk_set_rate failed: %d, old cluster: %d\n",
+			       __func__, ret, old_cluster);
 		}
 		mutex_unlock(&cluster_lock[old_cluster]);
 	}
@@ -283,8 +262,6 @@ static int merge_cluster_tables(void)
 				j++) {
 			table[k].frequency = VIRT_FREQ(i,
 					freq_table[i][j].frequency);
-			pr_debug("%s: index: %d, freq: %d\n", __func__, k,
-					table[k].frequency);
 			k++;
 		}
 	}
@@ -292,8 +269,6 @@ static int merge_cluster_tables(void)
 	table[k].driver_data = k;
 	table[k].frequency = CPUFREQ_TABLE_END;
 
-	pr_debug("%s: End, table: %p, count: %d\n", __func__, table, k);
-
 	return 0;
 }
 
@@ -307,7 +282,6 @@ static void _put_cluster_clk_and_freq_table(struct device *cpu_dev,
 
 	clk_put(clk[cluster]);
 	dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table[cluster]);
-	dev_dbg(cpu_dev, "%s: cluster: %d\n", __func__, cluster);
 }
 
 static void put_cluster_clk_and_freq_table(struct device *cpu_dev,
@@ -324,10 +298,9 @@ static void put_cluster_clk_and_freq_table(struct device *cpu_dev,
 
 	for_each_present_cpu(i) {
 		struct device *cdev = get_cpu_device(i);
-		if (!cdev) {
-			pr_err("%s: failed to get cpu%d device\n", __func__, i);
+
+		if (!cdev)
 			return;
-		}
 
 		_put_cluster_clk_and_freq_table(cdev, cpumask);
 	}
@@ -354,19 +327,12 @@ static int _get_cluster_clk_and_freq_table(struct device *cpu_dev,
 		goto out;
 
 	ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table[cluster]);
-	if (ret) {
-		dev_err(cpu_dev, "%s: failed to init cpufreq table, cpu: %d, err: %d\n",
-				__func__, cpu_dev->id, ret);
+	if (ret)
 		goto out;
-	}
 
 	clk[cluster] = clk_get(cpu_dev, NULL);
-	if (!IS_ERR(clk[cluster])) {
-		dev_dbg(cpu_dev, "%s: clk: %p & freq table: %p, cluster: %d\n",
-				__func__, clk[cluster], freq_table[cluster],
-				cluster);
+	if (!IS_ERR(clk[cluster]))
 		return 0;
-	}
 
 	dev_err(cpu_dev, "%s: Failed to get clk for cpu: %d, cluster: %d\n",
 			__func__, cpu_dev->id, cluster);
@@ -401,10 +367,9 @@ static int get_cluster_clk_and_freq_table(struct device *cpu_dev,
 	 */
 	for_each_present_cpu(i) {
 		struct device *cdev = get_cpu_device(i);
-		if (!cdev) {
-			pr_err("%s: failed to get cpu%d device\n", __func__, i);
+
+		if (!cdev)
 			return -ENODEV;
-		}
 
 		ret = _get_cluster_clk_and_freq_table(cdev, cpumask);
 		if (ret)
@@ -419,18 +384,14 @@ static int get_cluster_clk_and_freq_table(struct device *cpu_dev,
 	clk_big_min = get_table_min(freq_table[0]);
 	clk_little_max = VIRT_FREQ(1, get_table_max(freq_table[1]));
 
-	pr_debug("%s: cluster: %d, clk_big_min: %d, clk_little_max: %d\n",
-			__func__, cluster, clk_big_min, clk_little_max);
-
 	return 0;
 
 put_clusters:
 	for_each_present_cpu(i) {
 		struct device *cdev = get_cpu_device(i);
-		if (!cdev) {
-			pr_err("%s: failed to get cpu%d device\n", __func__, i);
+
+		if (!cdev)
 			return -ENODEV;
-		}
 
 		_put_cluster_clk_and_freq_table(cdev, cpumask);
 	}
@@ -500,8 +461,6 @@ static int ve_spc_cpufreq_exit(struct cpufreq_policy *policy)
 	}
 
 	put_cluster_clk_and_freq_table(cpu_dev, policy->related_cpus);
-	dev_dbg(cpu_dev, "%s: Exited, cpu: %d\n", __func__, policy->cpu);
-
 	return 0;
 }
 

From e318d2c8f32d409f304ece12e50a759b2ed78d1b Mon Sep 17 00:00:00 2001
From: Sudeep Holla <sudeep.holla@arm.com>
Date: Fri, 18 Oct 2019 11:37:49 +0100
Subject: [PATCH 13/18] cpufreq: vexpress-spc: fix some coding style issues

Fix the following checkpatch checks/warnings:

CHECK: Unnecessary parentheses around the code
CHECK: Alignment should match open parenthesis
CHECK: Prefer kernel type 'u32' over 'uint32_t'
WARNING: Missing a blank line after declarations

Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 drivers/cpufreq/vexpress-spc-cpufreq.c | 36 +++++++++++++-------------
 1 file changed, 18 insertions(+), 18 deletions(-)

diff --git a/drivers/cpufreq/vexpress-spc-cpufreq.c b/drivers/cpufreq/vexpress-spc-cpufreq.c
index 1326104247471..3259498d7eaa9 100644
--- a/drivers/cpufreq/vexpress-spc-cpufreq.c
+++ b/drivers/cpufreq/vexpress-spc-cpufreq.c
@@ -79,8 +79,8 @@ static unsigned int find_cluster_maxfreq(int cluster)
 	for_each_online_cpu(j) {
 		cpu_freq = per_cpu(cpu_last_req_freq, j);
 
-		if ((cluster == per_cpu(physical_cluster, j)) &&
-				(max_freq < cpu_freq))
+		if (cluster == per_cpu(physical_cluster, j) &&
+		    max_freq < cpu_freq)
 			max_freq = cpu_freq;
 	}
 
@@ -190,13 +190,11 @@ static int ve_spc_cpufreq_set_target(struct cpufreq_policy *policy,
 	freqs_new = freq_table[cur_cluster][index].frequency;
 
 	if (is_bL_switching_enabled()) {
-		if ((actual_cluster == A15_CLUSTER) &&
-				(freqs_new < clk_big_min)) {
+		if (actual_cluster == A15_CLUSTER && freqs_new < clk_big_min)
 			new_cluster = A7_CLUSTER;
-		} else if ((actual_cluster == A7_CLUSTER) &&
-				(freqs_new > clk_little_max)) {
+		else if (actual_cluster == A7_CLUSTER &&
+			 freqs_new > clk_little_max)
 			new_cluster = A15_CLUSTER;
-		}
 	}
 
 	ret = ve_spc_cpufreq_set_rate(cpu, actual_cluster, new_cluster,
@@ -224,7 +222,8 @@ static inline u32 get_table_count(struct cpufreq_frequency_table *table)
 static inline u32 get_table_min(struct cpufreq_frequency_table *table)
 {
 	struct cpufreq_frequency_table *pos;
-	uint32_t min_freq = ~0;
+	u32 min_freq = ~0;
+
 	cpufreq_for_each_entry(pos, table)
 		if (pos->frequency < min_freq)
 			min_freq = pos->frequency;
@@ -235,7 +234,8 @@ static inline u32 get_table_min(struct cpufreq_frequency_table *table)
 static inline u32 get_table_max(struct cpufreq_frequency_table *table)
 {
 	struct cpufreq_frequency_table *pos;
-	uint32_t max_freq = 0;
+	u32 max_freq = 0;
+
 	cpufreq_for_each_entry(pos, table)
 		if (pos->frequency > max_freq)
 			max_freq = pos->frequency;
@@ -259,10 +259,9 @@ static int merge_cluster_tables(void)
 	/* Add in reverse order to get freqs in increasing order */
 	for (i = MAX_CLUSTERS - 1; i >= 0; i--) {
 		for (j = 0; freq_table[i][j].frequency != CPUFREQ_TABLE_END;
-				j++) {
-			table[k].frequency = VIRT_FREQ(i,
-					freq_table[i][j].frequency);
-			k++;
+		     j++, k++) {
+			table[k].frequency =
+				VIRT_FREQ(i, freq_table[i][j].frequency);
 		}
 	}
 
@@ -335,13 +334,13 @@ static int _get_cluster_clk_and_freq_table(struct device *cpu_dev,
 		return 0;
 
 	dev_err(cpu_dev, "%s: Failed to get clk for cpu: %d, cluster: %d\n",
-			__func__, cpu_dev->id, cluster);
+		__func__, cpu_dev->id, cluster);
 	ret = PTR_ERR(clk[cluster]);
 	dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table[cluster]);
 
 out:
 	dev_err(cpu_dev, "%s: Failed to get data for cluster: %d\n", __func__,
-			cluster);
+		cluster);
 	return ret;
 }
 
@@ -411,7 +410,7 @@ static int ve_spc_cpufreq_init(struct cpufreq_policy *policy)
 	cpu_dev = get_cpu_device(policy->cpu);
 	if (!cpu_dev) {
 		pr_err("%s: failed to get cpu%d device\n", __func__,
-				policy->cpu);
+		       policy->cpu);
 		return -ENODEV;
 	}
 
@@ -437,7 +436,8 @@ static int ve_spc_cpufreq_init(struct cpufreq_policy *policy)
 	dev_pm_opp_of_register_em(policy->cpus);
 
 	if (is_bL_switching_enabled())
-		per_cpu(cpu_last_req_freq, policy->cpu) = clk_get_cpu_rate(policy->cpu);
+		per_cpu(cpu_last_req_freq, policy->cpu) =
+						clk_get_cpu_rate(policy->cpu);
 
 	dev_info(cpu_dev, "%s: CPU %d initialized\n", __func__, policy->cpu);
 	return 0;
@@ -456,7 +456,7 @@ static int ve_spc_cpufreq_exit(struct cpufreq_policy *policy)
 	cpu_dev = get_cpu_device(policy->cpu);
 	if (!cpu_dev) {
 		pr_err("%s: failed to get cpu%d device\n", __func__,
-				policy->cpu);
+		       policy->cpu);
 		return -ENODEV;
 	}
 

From af44d180e3de4cb411ce327b147ea3513f0bbbcb Mon Sep 17 00:00:00 2001
From: Anson Huang <Anson.Huang@nxp.com>
Date: Tue, 22 Oct 2019 16:33:19 +0800
Subject: [PATCH 14/18] cpufreq: imx-cpufreq-dt: Correct i.MX8MN's default
 speed grade value

i.MX8MN has different speed grade definition compared to
i.MX8MQ/i.MX8MM, when fuses are NOT written, the default
speed_grade should be set to minimum available OPP defined
in DT which is 1.2GHz, the corresponding speed_grade value
should be 0xb.

Fixes: 5b8010ba70d5 ("cpufreq: imx-cpufreq-dt: Add i.MX8MN support")
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 drivers/cpufreq/imx-cpufreq-dt.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/drivers/cpufreq/imx-cpufreq-dt.c b/drivers/cpufreq/imx-cpufreq-dt.c
index 35db14cf31026..85a6efd6b68f9 100644
--- a/drivers/cpufreq/imx-cpufreq-dt.c
+++ b/drivers/cpufreq/imx-cpufreq-dt.c
@@ -44,19 +44,19 @@ static int imx_cpufreq_dt_probe(struct platform_device *pdev)
 	mkt_segment = (cell_value & OCOTP_CFG3_MKT_SEGMENT_MASK) >> OCOTP_CFG3_MKT_SEGMENT_SHIFT;
 
 	/*
-	 * Early samples without fuses written report "0 0" which means
-	 * consumer segment and minimum speed grading.
-	 *
-	 * According to datasheet minimum speed grading is not supported for
-	 * consumer parts so clamp to 1 to avoid warning for "no OPPs"
+	 * Early samples without fuses written report "0 0" which may NOT
+	 * match any OPP defined in DT. So clamp to minimum OPP defined in
+	 * DT to avoid warning for "no OPPs".
 	 *
 	 * Applies to i.MX8M series SoCs.
 	 */
-	if (mkt_segment == 0 && speed_grade == 0 && (
-			of_machine_is_compatible("fsl,imx8mm") ||
-			of_machine_is_compatible("fsl,imx8mn") ||
-			of_machine_is_compatible("fsl,imx8mq")))
-		speed_grade = 1;
+	if (mkt_segment == 0 && speed_grade == 0) {
+		if (of_machine_is_compatible("fsl,imx8mm") ||
+		    of_machine_is_compatible("fsl,imx8mq"))
+			speed_grade = 1;
+		if (of_machine_is_compatible("fsl,imx8mn"))
+			speed_grade = 0xb;
+	}
 
 	supported_hw[0] = BIT(speed_grade);
 	supported_hw[1] = BIT(mkt_segment);

From e458eb97df7aa0865066efc9fb70bbdfab319b59 Mon Sep 17 00:00:00 2001
From: Nathan Chancellor <natechancellor@gmail.com>
Date: Tue, 22 Oct 2019 17:09:06 -0700
Subject: [PATCH 15/18] cpufreq: s3c64xx: Remove pointless NULL check in
 s3c64xx_cpufreq_driver_init

When building with Clang + -Wtautological-pointer-compare:

drivers/cpufreq/s3c64xx-cpufreq.c:152:6: warning: comparison of array
's3c64xx_freq_table' equal to a null pointer is always false
[-Wtautological-pointer-compare]
        if (s3c64xx_freq_table == NULL) {
            ^~~~~~~~~~~~~~~~~~    ~~~~
1 warning generated.

The definition of s3c64xx_freq_table is surrounded by an ifdef
directive for CONFIG_CPU_S3C6410, which is always true for this driver
because it depends on it in drivers/cpufreq/Kconfig.arm (and if it
weren't, there would be a build error because s3c64xx_freq_table would
not be a defined symbol).

Resolve this warning by removing the unnecessary NULL check because it
is always false as Clang notes. While we are at it, remove the
unnecessary ifdef conditional because it is always true.

Fixes: b3748ddd8056 ("[ARM] S3C64XX: Initial support for DVFS")
Link: https://github.com/ClangBuiltLinux/linux/issues/748
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 drivers/cpufreq/s3c64xx-cpufreq.c | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/drivers/cpufreq/s3c64xx-cpufreq.c b/drivers/cpufreq/s3c64xx-cpufreq.c
index af0c00dabb224..c6bdfc308e990 100644
--- a/drivers/cpufreq/s3c64xx-cpufreq.c
+++ b/drivers/cpufreq/s3c64xx-cpufreq.c
@@ -19,7 +19,6 @@
 static struct regulator *vddarm;
 static unsigned long regulator_latency;
 
-#ifdef CONFIG_CPU_S3C6410
 struct s3c64xx_dvfs {
 	unsigned int vddarm_min;
 	unsigned int vddarm_max;
@@ -48,7 +47,6 @@ static struct cpufreq_frequency_table s3c64xx_freq_table[] = {
 	{ 0, 4, 800000 },
 	{ 0, 0, CPUFREQ_TABLE_END },
 };
-#endif
 
 static int s3c64xx_cpufreq_set_target(struct cpufreq_policy *policy,
 				      unsigned int index)
@@ -149,11 +147,6 @@ static int s3c64xx_cpufreq_driver_init(struct cpufreq_policy *policy)
 	if (policy->cpu != 0)
 		return -EINVAL;
 
-	if (s3c64xx_freq_table == NULL) {
-		pr_err("No frequency information for this CPU\n");
-		return -ENODEV;
-	}
-
 	policy->clk = clk_get(NULL, "armclk");
 	if (IS_ERR(policy->clk)) {
 		pr_err("Unable to obtain ARMCLK: %ld\n",

From 4a6e135238798144ca8a2eab65018521c66240da Mon Sep 17 00:00:00 2001
From: Sudeep Holla <sudeep.holla@arm.com>
Date: Wed, 23 Oct 2019 12:08:10 +0100
Subject: [PATCH 16/18] cpufreq: vexpress-spc: use macros instead of hardcoded
 values for cluster ids

A15 and A7 cluster identifiers are fixed to 0 and 1 respectively. There are
macros for the same and used in most of the places except this instance.

Lets use macros instead of hardcoded values for cluster ids even here.

Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 drivers/cpufreq/vexpress-spc-cpufreq.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/cpufreq/vexpress-spc-cpufreq.c b/drivers/cpufreq/vexpress-spc-cpufreq.c
index 3259498d7eaa9..093ef8d3a8d40 100644
--- a/drivers/cpufreq/vexpress-spc-cpufreq.c
+++ b/drivers/cpufreq/vexpress-spc-cpufreq.c
@@ -380,8 +380,9 @@ static int get_cluster_clk_and_freq_table(struct device *cpu_dev,
 		goto put_clusters;
 
 	/* Assuming 2 cluster, set clk_big_min and clk_little_max */
-	clk_big_min = get_table_min(freq_table[0]);
-	clk_little_max = VIRT_FREQ(1, get_table_max(freq_table[1]));
+	clk_big_min = get_table_min(freq_table[A15_CLUSTER]);
+	clk_little_max = VIRT_FREQ(A7_CLUSTER,
+				   get_table_max(freq_table[A7_CLUSTER]));
 
 	return 0;
 

From e32beb064105e13d4db0b03b4da7142065db1b34 Mon Sep 17 00:00:00 2001
From: Sudeep Holla <sudeep.holla@arm.com>
Date: Wed, 23 Oct 2019 13:18:51 +0100
Subject: [PATCH 17/18] cpufreq: vexpress-spc: find and skip duplicates when
 merging frequencies

Currently the cpufreq core aborts the validation and return error
immediately when it encounter duplicate frequency table entries.
This change was introduced long back since commit da0c6dc00c69
("cpufreq: Handle sorted frequency tables more efficiently").

However, this missed the testing with modified firmware for long time.
Inorder to make it work with default settings, we need to ensure the
merged table for bL switcher contains no duplicates. Find the duplicates
and skip them when merging the frequenct tables of A15 and A7 clusters.

Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 drivers/cpufreq/vexpress-spc-cpufreq.c | 22 +++++++++++++++++++---
 1 file changed, 19 insertions(+), 3 deletions(-)

diff --git a/drivers/cpufreq/vexpress-spc-cpufreq.c b/drivers/cpufreq/vexpress-spc-cpufreq.c
index 093ef8d3a8d40..506e3f2bf53ac 100644
--- a/drivers/cpufreq/vexpress-spc-cpufreq.c
+++ b/drivers/cpufreq/vexpress-spc-cpufreq.c
@@ -242,6 +242,19 @@ static inline u32 get_table_max(struct cpufreq_frequency_table *table)
 	return max_freq;
 }
 
+static bool search_frequency(struct cpufreq_frequency_table *table, int size,
+			     unsigned int freq)
+{
+	int count;
+
+	for (count = 0; count < size; count++) {
+		if (table[count].frequency == freq)
+			return true;
+	}
+
+	return false;
+}
+
 static int merge_cluster_tables(void)
 {
 	int i, j, k = 0, count = 1;
@@ -257,10 +270,13 @@ static int merge_cluster_tables(void)
 	freq_table[MAX_CLUSTERS] = table;
 
 	/* Add in reverse order to get freqs in increasing order */
-	for (i = MAX_CLUSTERS - 1; i >= 0; i--) {
+	for (i = MAX_CLUSTERS - 1; i >= 0; i--, count = k) {
 		for (j = 0; freq_table[i][j].frequency != CPUFREQ_TABLE_END;
-		     j++, k++) {
-			table[k].frequency =
+		     j++) {
+			if (i == A15_CLUSTER &&
+			    search_frequency(table, count, freq_table[i][j].frequency))
+				continue; /* skip duplicates */
+			table[k++].frequency =
 				VIRT_FREQ(i, freq_table[i][j].frequency);
 		}
 	}

From c23734487fb44ee16c1b007ba72d793c085e4ec4 Mon Sep 17 00:00:00 2001
From: Ondrej Jirman <megous@megous.com>
Date: Fri, 1 Nov 2019 17:41:51 +0100
Subject: [PATCH 18/18] cpufreq: sun50i: Fix CPU speed bin detection

I have observed failures to boot on Orange Pi 3, because this driver
determined that my SoC is from the normal bin, but my SoC only works
reliably with the OPP values for the slowest bin.

By querying H6 owners, it was found that e-fuse values found in the wild
are in the range of 1-3, value of 7 was not reported, yet. From this and
from unused defines in BSP code, it can be assumed that meaning of efuse
values on H6 actually is:

- 1 = slowest bin
- 2 = normal bin
- 3 = fastest bin

Vendor code actually treats 0 and 2 as invalid efuse values, but later
treats all invalid values as a normal bin. This looks like a mistake in
bin detection code, that was plastered over by a hack in cpufreq code,
so let's not repeat it here. It probably only works because there are no
SoCs in the wild with efuse value of 0, and fast bin SoCs are made to
use normal bin OPP tables, which is also safe.

Let's play it safe and interpret 0 as the slowest bin, but fix detection
of other bins to match this research. More research will be done before
actual OPP tables are merged.

Fixes: f328584f7bff ("cpufreq: Add sun50i nvmem based CPU scaling driver")
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 drivers/cpufreq/sun50i-cpufreq-nvmem.c | 25 ++++++++++---------------
 1 file changed, 10 insertions(+), 15 deletions(-)

diff --git a/drivers/cpufreq/sun50i-cpufreq-nvmem.c b/drivers/cpufreq/sun50i-cpufreq-nvmem.c
index eca32e443716c..9907a165135b7 100644
--- a/drivers/cpufreq/sun50i-cpufreq-nvmem.c
+++ b/drivers/cpufreq/sun50i-cpufreq-nvmem.c
@@ -25,7 +25,7 @@
 static struct platform_device *cpufreq_dt_pdev, *sun50i_cpufreq_pdev;
 
 /**
- * sun50i_cpufreq_get_efuse() - Parse and return efuse value present on SoC
+ * sun50i_cpufreq_get_efuse() - Determine speed grade from efuse value
  * @versions: Set to the value parsed from efuse
  *
  * Returns 0 if success.
@@ -69,21 +69,16 @@ static int sun50i_cpufreq_get_efuse(u32 *versions)
 		return PTR_ERR(speedbin);
 
 	efuse_value = (*speedbin >> NVMEM_SHIFT) & NVMEM_MASK;
-	switch (efuse_value) {
-	case 0b0001:
-		*versions = 1;
-		break;
-	case 0b0011:
-		*versions = 2;
-		break;
-	default:
-		/*
-		 * For other situations, we treat it as bin0.
-		 * This vf table can be run for any good cpu.
-		 */
+
+	/*
+	 * We treat unexpected efuse values as if the SoC was from
+	 * the slowest bin. Expected efuse values are 1-3, slowest
+	 * to fastest.
+	 */
+	if (efuse_value >= 1 && efuse_value <= 3)
+		*versions = efuse_value - 1;
+	else
 		*versions = 0;
-		break;
-	}
 
 	kfree(speedbin);
 	return 0;