Merge branches 'pm-opp' and 'pm-cpufreq'

Merge operating performance points (OPP) framework updates for and
intel_pstate driver fixes for 5.16-rc1.

* pm-opp:
  dt-bindings: opp: Allow multi-worded OPP entry name
  opp: Fix return in _opp_add_static_v2()
  PM / devfreq: tegra30: Check whether clk_round_rate() returns zero rate
  PM / devfreq: tegra30: Use resource-managed helpers
  PM / devfreq: Add devm_devfreq_add_governor()
  opp: Add more resource-managed variants of dev_pm_opp_of_add_table()
  opp: Change type of dev_pm_opp_attach_genpd(names) argument
  opp: Fix required-opps phandle array count check

* pm-cpufreq:
  cpufreq: intel_pstate: Clear HWP Status during HWP Interrupt enable
  cpufreq: intel_pstate: Fix unchecked MSR 0x773 access
  cpufreq: intel_pstate: Clear HWP desired on suspend/shutdown and offline

Documentation/devicetree/bindings/opp/opp-v2-base.yaml

@@ -33,7 +33,7 @@ properties:
     type: boolean
 
 patternProperties:
-  '^opp-?[0-9]+$':
+  '^opp(-?[0-9]+)*$':
     type: object
     description:
       One or more OPP nodes describing voltage-current-frequency combinations.

drivers/cpufreq/intel_pstate.c

@@ -1006,9 +1006,16 @@ static void intel_pstate_hwp_offline(struct cpudata *cpu)
 		 */
 		value &= ~GENMASK_ULL(31, 24);
 		value |= HWP_ENERGY_PERF_PREFERENCE(cpu->epp_cached);
-		WRITE_ONCE(cpu->hwp_req_cached, value);
 	}
 
+	/*
+	 * Clear the desired perf field in the cached HWP request value to
+	 * prevent nonzero desired values from being leaked into the active
+	 * mode.
+	 */
+	value &= ~HWP_DESIRED_PERF(~0L);
+	WRITE_ONCE(cpu->hwp_req_cached, value);
+
 	value &= ~GENMASK_ULL(31, 0);
 	min_perf = HWP_LOWEST_PERF(READ_ONCE(cpu->hwp_cap_cached));
 
@@ -1620,6 +1627,9 @@ static void intel_pstate_disable_hwp_interrupt(struct cpudata *cpudata)
 {
 	unsigned long flags;
 
+	if (!boot_cpu_has(X86_FEATURE_HWP_NOTIFY))
+		return;
+
 	/* wrmsrl_on_cpu has to be outside spinlock as this can result in IPC */
 	wrmsrl_on_cpu(cpudata->cpu, MSR_HWP_INTERRUPT, 0x00);
 
@@ -1642,6 +1652,7 @@ static void intel_pstate_enable_hwp_interrupt(struct cpudata *cpudata)
 
 		/* wrmsrl_on_cpu has to be outside spinlock as this can result in IPC */
 		wrmsrl_on_cpu(cpudata->cpu, MSR_HWP_INTERRUPT, 0x01);
+		wrmsrl_on_cpu(cpudata->cpu, MSR_HWP_STATUS, 0);
 	}
 }
 
@@ -3003,6 +3014,27 @@ static int intel_cpufreq_cpu_exit(struct cpufreq_policy *policy)
 	return intel_pstate_cpu_exit(policy);
 }
 
+static int intel_cpufreq_suspend(struct cpufreq_policy *policy)
+{
+	intel_pstate_suspend(policy);
+
+	if (hwp_active) {
+		struct cpudata *cpu = all_cpu_data[policy->cpu];
+		u64 value = READ_ONCE(cpu->hwp_req_cached);
+
+		/*
+		 * Clear the desired perf field in MSR_HWP_REQUEST in case
+		 * intel_cpufreq_adjust_perf() is in use and the last value
+		 * written by it may not be suitable.
+		 */
+		value &= ~HWP_DESIRED_PERF(~0L);
+		wrmsrl_on_cpu(cpu->cpu, MSR_HWP_REQUEST, value);
+		WRITE_ONCE(cpu->hwp_req_cached, value);
+	}
+
+	return 0;
+}
+
 static struct cpufreq_driver intel_cpufreq = {
 	.flags		= CPUFREQ_CONST_LOOPS,
 	.verify		= intel_cpufreq_verify_policy,
@@ -3012,7 +3044,7 @@ static struct cpufreq_driver intel_cpufreq = {
 	.exit		= intel_cpufreq_cpu_exit,
 	.offline	= intel_cpufreq_cpu_offline,
 	.online		= intel_pstate_cpu_online,
-	.suspend	= intel_pstate_suspend,
+	.suspend	= intel_cpufreq_suspend,
 	.resume		= intel_pstate_resume,
 	.update_limits	= intel_pstate_update_limits,
 	.name		= "intel_cpufreq",

drivers/devfreq/devfreq.c

@@ -1301,6 +1301,32 @@ int devfreq_add_governor(struct devfreq_governor *governor)
 }
 EXPORT_SYMBOL(devfreq_add_governor);
 
+static void devm_devfreq_remove_governor(void *governor)
+{
+	WARN_ON(devfreq_remove_governor(governor));
+}
+
+/**
+ * devm_devfreq_add_governor() - Add devfreq governor
+ * @dev:	device which adds devfreq governor
+ * @governor:	the devfreq governor to be added
+ *
+ * This is a resource-managed variant of devfreq_add_governor().
+ */
+int devm_devfreq_add_governor(struct device *dev,
+			      struct devfreq_governor *governor)
+{
+	int err;
+
+	err = devfreq_add_governor(governor);
+	if (err)
+		return err;
+
+	return devm_add_action_or_reset(dev, devm_devfreq_remove_governor,
+					governor);
+}
+EXPORT_SYMBOL(devm_devfreq_add_governor);
+
 /**
  * devfreq_remove_governor() - Remove devfreq feature from a device.
  * @governor:	the devfreq governor to be removed

drivers/devfreq/governor.h

@@ -84,6 +84,9 @@ void devfreq_update_interval(struct devfreq *devfreq, unsigned int *delay);
 int devfreq_add_governor(struct devfreq_governor *governor);
 int devfreq_remove_governor(struct devfreq_governor *governor);
 
+int devm_devfreq_add_governor(struct device *dev,
+			      struct devfreq_governor *governor);
+
 int devfreq_update_status(struct devfreq *devfreq, unsigned long freq);
 int devfreq_update_target(struct devfreq *devfreq, unsigned long freq);
 

drivers/devfreq/tegra30-devfreq.c

@@ -178,7 +178,6 @@ struct tegra_devfreq_soc_data {
 
 struct tegra_devfreq {
 	struct devfreq		*devfreq;
-	struct opp_table	*opp_table;
 
 	struct reset_control	*reset;
 	struct clk		*clock;
@@ -789,6 +788,39 @@ static struct devfreq_governor tegra_devfreq_governor = {
 	.event_handler = tegra_governor_event_handler,
 };
 
+static void devm_tegra_devfreq_deinit_hw(void *data)
+{
+	struct tegra_devfreq *tegra = data;
+
+	reset_control_reset(tegra->reset);
+	clk_disable_unprepare(tegra->clock);
+}
+
+static int devm_tegra_devfreq_init_hw(struct device *dev,
+				      struct tegra_devfreq *tegra)
+{
+	int err;
+
+	err = clk_prepare_enable(tegra->clock);
+	if (err) {
+		dev_err(dev, "Failed to prepare and enable ACTMON clock\n");
+		return err;
+	}
+
+	err = devm_add_action_or_reset(dev, devm_tegra_devfreq_deinit_hw,
+				       tegra);
+	if (err)
+		return err;
+
+	err = reset_control_reset(tegra->reset);
+	if (err) {
+		dev_err(dev, "Failed to reset hardware: %d\n", err);
+		return err;
+	}
+
+	return err;
+}
+
 static int tegra_devfreq_probe(struct platform_device *pdev)
 {
 	u32 hw_version = BIT(tegra_sku_info.soc_speedo_id);
@@ -842,38 +874,26 @@ static int tegra_devfreq_probe(struct platform_device *pdev)
 		return err;
 	}
 
-	tegra->opp_table = dev_pm_opp_set_supported_hw(&pdev->dev,
-						       &hw_version, 1);
-	err = PTR_ERR_OR_ZERO(tegra->opp_table);
+	err = devm_pm_opp_set_supported_hw(&pdev->dev, &hw_version, 1);
 	if (err) {
 		dev_err(&pdev->dev, "Failed to set supported HW: %d\n", err);
 		return err;
 	}
 
-	err = dev_pm_opp_of_add_table_noclk(&pdev->dev, 0);
+	err = devm_pm_opp_of_add_table_noclk(&pdev->dev, 0);
 	if (err) {
 		dev_err(&pdev->dev, "Failed to add OPP table: %d\n", err);
-		goto put_hw;
-	}
-
-	err = clk_prepare_enable(tegra->clock);
-	if (err) {
-		dev_err(&pdev->dev,
-			"Failed to prepare and enable ACTMON clock\n");
-		goto remove_table;
+		return err;
 	}
 
-	err = reset_control_reset(tegra->reset);
-	if (err) {
-		dev_err(&pdev->dev, "Failed to reset hardware: %d\n", err);
-		goto disable_clk;
-	}
+	err = devm_tegra_devfreq_init_hw(&pdev->dev, tegra);
+	if (err)
+		return err;
 
 	rate = clk_round_rate(tegra->emc_clock, ULONG_MAX);
-	if (rate < 0) {
+	if (rate <= 0) {
 		dev_err(&pdev->dev, "Failed to round clock rate: %ld\n", rate);
-		err = rate;
-		goto disable_clk;
+		return rate ?: -EINVAL;
 	}
 
 	tegra->max_freq = rate / KHZ;
@@ -892,52 +912,18 @@ static int tegra_devfreq_probe(struct platform_device *pdev)
 	INIT_DELAYED_WORK(&tegra->cpufreq_update_work,
 			  tegra_actmon_delayed_update);
 
-	err = devfreq_add_governor(&tegra_devfreq_governor);
+	err = devm_devfreq_add_governor(&pdev->dev, &tegra_devfreq_governor);
 	if (err) {
 		dev_err(&pdev->dev, "Failed to add governor: %d\n", err);
-		goto remove_opps;
+		return err;
 	}
 
 	tegra_devfreq_profile.initial_freq = clk_get_rate(tegra->emc_clock);
 
-	devfreq = devfreq_add_device(&pdev->dev, &tegra_devfreq_profile,
-				     "tegra_actmon", NULL);
-	if (IS_ERR(devfreq)) {
-		err = PTR_ERR(devfreq);
-		goto remove_governor;
-	}
-
-	return 0;
-
-remove_governor:
-	devfreq_remove_governor(&tegra_devfreq_governor);
-
-remove_opps:
-	dev_pm_opp_remove_all_dynamic(&pdev->dev);
-
-	reset_control_reset(tegra->reset);
-disable_clk:
-	clk_disable_unprepare(tegra->clock);
-remove_table:
-	dev_pm_opp_of_remove_table(&pdev->dev);
-put_hw:
-	dev_pm_opp_put_supported_hw(tegra->opp_table);
-
-	return err;
-}
-
-static int tegra_devfreq_remove(struct platform_device *pdev)
-{
-	struct tegra_devfreq *tegra = platform_get_drvdata(pdev);
-
-	devfreq_remove_device(tegra->devfreq);
-	devfreq_remove_governor(&tegra_devfreq_governor);
-
-	reset_control_reset(tegra->reset);
-	clk_disable_unprepare(tegra->clock);
-
-	dev_pm_opp_of_remove_table(&pdev->dev);
-	dev_pm_opp_put_supported_hw(tegra->opp_table);
+	devfreq = devm_devfreq_add_device(&pdev->dev, &tegra_devfreq_profile,
+					  "tegra_actmon", NULL);
+	if (IS_ERR(devfreq))
+		return PTR_ERR(devfreq);
 
 	return 0;
 }
@@ -967,7 +953,6 @@ MODULE_DEVICE_TABLE(of, tegra_devfreq_of_match);
 
 static struct platform_driver tegra_devfreq_driver = {
 	.probe	= tegra_devfreq_probe,
-	.remove	= tegra_devfreq_remove,
 	.driver = {
 		.name = "tegra-devfreq",
 		.of_match_table = tegra_devfreq_of_match,

drivers/opp/core.c

@@ -2348,12 +2348,12 @@ static void _opp_detach_genpd(struct opp_table *opp_table)
  * "required-opps" are added in DT.
  */
 struct opp_table *dev_pm_opp_attach_genpd(struct device *dev,
-		const char **names, struct device ***virt_devs)
+		const char * const *names, struct device ***virt_devs)
 {
 	struct opp_table *opp_table;
 	struct device *virt_dev;
 	int index = 0, ret = -EINVAL;
-	const char **name = names;
+	const char * const *name = names;
 
 	opp_table = _add_opp_table(dev, false);
 	if (IS_ERR(opp_table))
@@ -2457,7 +2457,7 @@ static void devm_pm_opp_detach_genpd(void *data)
  *
  * Return: 0 on success and errorno otherwise.
  */
-int devm_pm_opp_attach_genpd(struct device *dev, const char **names,
+int devm_pm_opp_attach_genpd(struct device *dev, const char * const *names,
 			     struct device ***virt_devs)
 {
 	struct opp_table *opp_table;