diff --git a/Documentation/devicetree/bindings/firmware/meson/meson_sm.txt b/Documentation/devicetree/bindings/firmware/meson/meson_sm.txt new file mode 100644 index 0000000000000..c248cd44f7270 --- /dev/null +++ b/Documentation/devicetree/bindings/firmware/meson/meson_sm.txt @@ -0,0 +1,15 @@ +* Amlogic Secure Monitor + +In the Amlogic SoCs the Secure Monitor code is used to provide access to the +NVMEM, enable JTAG, set USB boot, etc... + +Required properties for the secure monitor node: +- compatible: Should be "amlogic,meson-gxbb-sm" + +Example: + + firmware { + sm: secure-monitor { + compatible = "amlogic,meson-gxbb-sm"; + }; + }; diff --git a/Documentation/devicetree/bindings/media/meson-ir.txt b/Documentation/devicetree/bindings/media/meson-ir.txt index 407848e85f311..e7e3f3c4fc8f6 100644 --- a/Documentation/devicetree/bindings/media/meson-ir.txt +++ b/Documentation/devicetree/bindings/media/meson-ir.txt @@ -1,7 +1,10 @@ * Amlogic Meson IR remote control receiver Required properties: - - compatible : should be "amlogic,meson6-ir" + - compatible : depending on the platform this should be one of: + - "amlogic,meson6-ir" + - "amlogic,meson8b-ir" + - "amlogic,meson-gxbb-ir" - reg : physical base address and length of the device registers - interrupts : a single specifier for the interrupt from the device diff --git a/Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt b/Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt new file mode 100644 index 0000000000000..fafd85bd67a68 --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt @@ -0,0 +1,39 @@ += Amlogic eFuse device tree bindings = + +Required properties: +- compatible: should be "amlogic,meson-gxbb-efuse" + += Data cells = +Are child nodes of eFuse, bindings of which as described in +bindings/nvmem/nvmem.txt + +Example: + + efuse: efuse { + compatible = "amlogic,meson-gxbb-efuse"; + #address-cells = <1>; + #size-cells = <1>; + + sn: sn@14 { + reg = <0x14 0x10>; + }; + + eth_mac: eth_mac@34 { + reg = <0x34 0x10>; + }; + + bid: bid@46 { + reg = <0x46 0x30>; + }; + }; + += Data consumers = +Are device nodes which consume nvmem data cells. + +For example: + + eth_mac { + ... + nvmem-cells = <ð_mac>; + nvmem-cell-names = "eth_mac"; + }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts index 90a84c514d3d6..e6e3491d48a5a 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts @@ -87,3 +87,14 @@ pinctrl-names = "default"; }; +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + +&i2c_A { + status = "okay"; + pinctrl-0 = <&i2c_a_pins>; + pinctrl-names = "default"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts index 62979076e2508..03e3d76626ddc 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts @@ -50,3 +50,9 @@ compatible = "amlogic,p200", "amlogic,meson-gxbb"; model = "Amlogic Meson GXBB P200 Development Board"; }; + +&i2c_B { + status = "okay"; + pinctrl-0 = <&i2c_b_pins>; + pinctrl-names = "default"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi index f4f30f674b4c1..06a34dc6002f5 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi @@ -57,6 +57,19 @@ device_type = "memory"; reg = <0x0 0x0 0x0 0x40000000>; }; + + usb_pwr: regulator-usb-pwrs { + compatible = "regulator-fixed"; + + regulator-name = "USB_PWR"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + /* signal name in schematic: USB_PWR_EN */ + gpio = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; }; /* This UART is brought out to the DB9 connector */ @@ -72,3 +85,25 @@ pinctrl-names = "default"; }; +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + +&usb0_phy { + status = "okay"; + phy-supply = <&usb_pwr>; +}; + +&usb1_phy { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi index 54bb7c7390896..73f1593701883 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi @@ -52,6 +52,19 @@ chosen { stdout-path = "serial0:115200n8"; }; + + usb_vbus: regulator-usb0-vbus { + compatible = "regulator-fixed"; + + regulator-name = "USB0_VBUS"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + }; &uart_AO { @@ -60,3 +73,32 @@ pinctrl-names = "default"; }; + +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + +ðmac { + status = "okay"; + pinctrl-0 = <ð_pins>; + pinctrl-names = "default"; +}; + +&usb0_phy { + status = "okay"; + phy-supply = <&usb_vbus>; +}; + +&usb1_phy { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi index e502c24b0ac79..4e9cd01c60a72 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi @@ -45,6 +45,9 @@ #include #include #include +#include +#include +#include / { compatible = "amlogic,meson-gxbb"; @@ -99,6 +102,30 @@ method = "smc"; }; + firmware { + sm: secure-monitor { + compatible = "amlogic,meson-gxbb-sm"; + }; + }; + + efuse: efuse { + compatible = "amlogic,meson-gxbb-efuse"; + #address-cells = <1>; + #size-cells = <1>; + + sn: sn@14 { + reg = <0x14 0x10>; + }; + + eth_mac: eth_mac@34 { + reg = <0x34 0x10>; + }; + + bid: bid@46 { + reg = <0x46 0x30>; + }; + }; + timer { compatible = "arm,armv8-timer"; interrupts = ; ranges; + usb0_phy: phy@c0000000 { + compatible = "amlogic,meson-gxbb-usb2-phy"; + #phy-cells = <0>; + reg = <0x0 0xc0000000 0x0 0x20>; + resets = <&reset RESET_USB_OTG>; + clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>; + clock-names = "usb_general", "usb"; + status = "disabled"; + }; + + usb1_phy: phy@c0000020 { + compatible = "amlogic,meson-gxbb-usb2-phy"; + #phy-cells = <0>; + reg = <0x0 0xc0000020 0x0 0x20>; + clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1>; + clock-names = "usb_general", "usb"; + status = "disabled"; + }; + cbus: cbus@c1100000 { compatible = "simple-bus"; reg = <0x0 0xc1100000 0x0 0x100000>; @@ -153,6 +199,27 @@ status = "disabled"; }; + pwm_ab: pwm@8550 { + compatible = "amlogic,meson-gxbb-pwm"; + reg = <0x0 0x08550 0x0 0x10>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm_cd: pwm@8650 { + compatible = "amlogic,meson-gxbb-pwm"; + reg = <0x0 0x08650 0x0 0x10>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm_ef: pwm@86c0 { + compatible = "amlogic,meson-gxbb-pwm"; + reg = <0x0 0x086c0 0x0 0x10>; + #pwm-cells = <3>; + status = "disabled"; + }; + uart_C: serial@8700 { compatible = "amlogic,meson-uart"; reg = <0x0 0x8700 0x0 0x14>; @@ -160,6 +227,51 @@ clocks = <&xtal>; status = "disabled"; }; + + watchdog@98d0 { + compatible = "amlogic,meson-gxbb-wdt"; + reg = <0x0 0x098d0 0x0 0x10>; + clocks = <&xtal>; + }; + + spifc: spi@8c80 { + compatible = "amlogic,meson-gxbb-spifc"; + reg = <0x0 0x08c80 0x0 0x80>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc CLKID_SPI>; + status = "disabled"; + }; + + i2c_A: i2c@8500 { + compatible = "amlogic,meson-gxbb-i2c"; + reg = <0x0 0x08500 0x0 0x20>; + interrupts = ; + clocks = <&clkc CLKID_I2C>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c_B: i2c@87c0 { + compatible = "amlogic,meson-gxbb-i2c"; + reg = <0x0 0x087c0 0x0 0x20>; + interrupts = ; + clocks = <&clkc CLKID_I2C>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c_C: i2c@87e0 { + compatible = "amlogic,meson-gxbb-i2c"; + reg = <0x0 0x087e0 0x0 0x20>; + interrupts = ; + clocks = <&clkc CLKID_I2C>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; gic: interrupt-controller@c4301000 { @@ -203,6 +315,56 @@ function = "uart_ao"; }; }; + + remote_input_ao_pins: remote_input_ao { + mux { + groups = "remote_input_ao"; + function = "remote_input_ao"; + }; + }; + + i2c_ao_pins: i2c_ao { + mux { + groups = "i2c_sck_ao", + "i2c_sda_ao"; + function = "i2c_ao"; + }; + }; + + pwm_ao_a_3_pins: pwm_ao_a_3 { + mux { + groups = "pwm_ao_a_3"; + function = "pwm_ao_a_3"; + }; + }; + + pwm_ao_a_6_pins: pwm_ao_a_6 { + mux { + groups = "pwm_ao_a_6"; + function = "pwm_ao_a_6"; + }; + }; + + pwm_ao_a_12_pins: pwm_ao_a_12 { + mux { + groups = "pwm_ao_a_12"; + function = "pwm_ao_a_12"; + }; + }; + + pwm_ao_b_pins: pwm_ao_b { + mux { + groups = "pwm_ao_b"; + function = "pwm_ao_b"; + }; + }; + }; + + clkc_AO: clock-controller@040 { + compatible = "amlogic,gxbb-aoclkc"; + reg = <0x0 0x00040 0x0 0x4>; + #clock-cells = <1>; + #reset-cells = <1>; }; uart_AO: serial@4c0 { @@ -212,6 +374,30 @@ clocks = <&xtal>; status = "disabled"; }; + + ir: ir@580 { + compatible = "amlogic,meson-gxbb-ir"; + reg = <0x0 0x00580 0x0 0x40>; + interrupts = ; + status = "disabled"; + }; + + pwm_ab_AO: pwm@550 { + compatible = "amlogic,meson-gxbb-pwm"; + reg = <0x0 0x0550 0x0 0x10>; + #pwm-cells = <3>; + status = "disabled"; + }; + + i2c_AO: i2c@500 { + compatible = "amlogic,meson-gxbb-i2c"; + reg = <0x0 0x500 0x0 0x20>; + interrupts = ; + clocks = <&clkc CLKID_AO_I2C>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; periphs: periphs@c8834000 { @@ -251,6 +437,16 @@ }; }; + nor_pins: nor { + mux { + groups = "nor_d", + "nor_q", + "nor_c", + "nor_cs"; + function = "nor"; + }; + }; + sdcard_pins: sdcard { mux { groups = "sdcard_d0", @@ -263,6 +459,25 @@ }; }; + sdio_pins: sdio { + mux { + groups = "sdio_d0", + "sdio_d1", + "sdio_d2", + "sdio_d3", + "sdio_cmd", + "sdio_clk"; + function = "sdio"; + }; + }; + + sdio_irq_pins: sdio_irq { + mux { + groups = "sdio_irq"; + function = "sdio"; + }; + }; + uart_a_pins: uart_a { mux { groups = "uart_tx_a", @@ -287,6 +502,30 @@ }; }; + i2c_a_pins: i2c_a { + mux { + groups = "i2c_sck_a", + "i2c_sda_a"; + function = "i2c_a"; + }; + }; + + i2c_b_pins: i2c_b { + mux { + groups = "i2c_sck_b", + "i2c_sda_b"; + function = "i2c_b"; + }; + }; + + i2c_c_pins: i2c_c { + mux { + groups = "i2c_sck_c", + "i2c_sda_c"; + function = "i2c_c"; + }; + }; + eth_pins: eth_c { mux { groups = "eth_mdio", @@ -306,6 +545,55 @@ function = "eth"; }; }; + + pwm_a_x_pins: pwm_a_x { + mux { + groups = "pwm_a_x"; + function = "pwm_a_x"; + }; + }; + + pwm_a_y_pins: pwm_a_y { + mux { + groups = "pwm_a_y"; + function = "pwm_a_y"; + }; + }; + + pwm_b_pins: pwm_b { + mux { + groups = "pwm_b"; + function = "pwm_b"; + }; + }; + + pwm_d_pins: pwm_d { + mux { + groups = "pwm_d"; + function = "pwm_d"; + }; + }; + + pwm_e_pins: pwm_e { + mux { + groups = "pwm_e"; + function = "pwm_e"; + }; + }; + + pwm_f_x_pins: pwm_f_x { + mux { + groups = "pwm_f_x"; + function = "pwm_f_x"; + }; + }; + + pwm_f_y_pins: pwm_f_y { + mux { + groups = "pwm_f_y"; + function = "pwm_f_y"; + }; + }; }; }; @@ -321,6 +609,15 @@ #clock-cells = <1>; reg = <0x0 0x0 0x0 0x3db>; }; + + mailbox: mailbox@404 { + compatible = "amlogic,meson-gxbb-mhu"; + reg = <0 0x404 0 0x4c>; + interrupts = <0 208 IRQ_TYPE_EDGE_RISING>, + <0 209 IRQ_TYPE_EDGE_RISING>, + <0 210 IRQ_TYPE_EDGE_RISING>; + #mbox-cells = <1>; + }; }; apb: apb@d0000000 { @@ -331,14 +628,40 @@ ranges = <0x0 0x0 0x0 0xd0000000 0x0 0x200000>; }; + usb0: usb@c9000000 { + compatible = "amlogic,meson-gxbb-usb", "snps,dwc2"; + reg = <0x0 0xc9000000 0x0 0x40000>; + interrupts = ; + clocks = <&clkc CLKID_USB0_DDR_BRIDGE>; + clock-names = "otg"; + phys = <&usb0_phy>; + phy-names = "usb2-phy"; + dr_mode = "host"; + status = "disabled"; + }; + + usb1: usb@c9100000 { + compatible = "amlogic,meson-gxbb-usb", "snps,dwc2"; + reg = <0x0 0xc9100000 0x0 0x40000>; + interrupts = ; + clocks = <&clkc CLKID_USB1_DDR_BRIDGE>; + clock-names = "otg"; + phys = <&usb1_phy>; + phy-names = "usb2-phy"; + dr_mode = "host"; + status = "disabled"; + }; + ethmac: ethernet@c9410000 { - compatible = "amlogic,meson6-dwmac", "snps,dwmac"; + compatible = "amlogic,meson-gxbb-dwmac", "snps,dwmac"; reg = <0x0 0xc9410000 0x0 0x10000 0x0 0xc8834540 0x0 0x4>; interrupts = <0 8 1>; interrupt-names = "macirq"; - clocks = <&xtal>; - clock-names = "stmmaceth"; + clocks = <&clkc CLKID_ETH>, + <&clkc CLKID_FCLK_DIV2>, + <&clkc CLKID_MPLL2>; + clock-names = "stmmaceth", "clkin0", "clkin1"; phy-mode = "rgmii"; status = "disabled"; };