diff --git a/drivers/net/phy/aquantia/aquantia_main.c b/drivers/net/phy/aquantia/aquantia_main.c
index 86b0e63de5d8..08b1c9cc902b 100644
--- a/drivers/net/phy/aquantia/aquantia_main.c
+++ b/drivers/net/phy/aquantia/aquantia_main.c
@@ -50,6 +50,7 @@
 #define MDIO_AN_VEND_PROV_1000BASET_HALF	BIT(14)
 #define MDIO_AN_VEND_PROV_5000BASET_FULL	BIT(11)
 #define MDIO_AN_VEND_PROV_2500BASET_FULL	BIT(10)
+#define MDIO_AN_VEND_PROV_EXC_PHYID_INFO	BIT(6)
 #define MDIO_AN_VEND_PROV_DOWNSHIFT_EN		BIT(4)
 #define MDIO_AN_VEND_PROV_DOWNSHIFT_MASK	GENMASK(3, 0)
 #define MDIO_AN_VEND_PROV_DOWNSHIFT_DFLT	4
@@ -333,6 +334,238 @@ static int aqr_read_status(struct phy_device *phydev)
 	return genphy_c45_read_status(phydev);
 }
 
+static int aqr105_get_features(struct phy_device *phydev)
+{
+	int ret;
+
+	/* Normal feature discovery */
+	ret = genphy_c45_pma_read_abilities(phydev);
+	if (ret)
+		return ret;
+
+	/* The AQR105 PHY misses to indicate the 2.5G and 5G modes, so add them
+	 * here
+	 */
+	linkmode_set_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT,
+			 phydev->supported);
+	linkmode_set_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
+			 phydev->supported);
+
+	/* The AQR105 PHY suppports both RJ45 and SFP+ interfaces */
+	linkmode_set_bit(ETHTOOL_LINK_MODE_TP_BIT, phydev->supported);
+	linkmode_set_bit(ETHTOOL_LINK_MODE_FIBRE_BIT, phydev->supported);
+
+	return 0;
+}
+
+static int aqr105_setup_forced(struct phy_device *phydev)
+{
+	int vend = MDIO_AN_VEND_PROV_EXC_PHYID_INFO;
+	int ctrl10 = 0;
+	int adv = ADVERTISE_CSMA;
+	int ret;
+
+	switch (phydev->speed) {
+	case SPEED_100:
+		adv |= ADVERTISE_100FULL;
+		break;
+	case SPEED_1000:
+		adv |= ADVERTISE_NPAGE;
+		if (phydev->duplex == DUPLEX_FULL)
+			vend |= MDIO_AN_VEND_PROV_1000BASET_FULL;
+		else
+			vend |= MDIO_AN_VEND_PROV_1000BASET_HALF;
+		break;
+	case SPEED_2500:
+		adv |= (ADVERTISE_NPAGE | ADVERTISE_RESV);
+		vend |= MDIO_AN_VEND_PROV_2500BASET_FULL;
+		break;
+	case SPEED_5000:
+		adv |= (ADVERTISE_NPAGE | ADVERTISE_RESV);
+		vend |= MDIO_AN_VEND_PROV_5000BASET_FULL;
+		break;
+	case SPEED_10000:
+		adv |= (ADVERTISE_NPAGE | ADVERTISE_RESV);
+		ctrl10 |= MDIO_AN_10GBT_CTRL_ADV10G;
+		break;
+	default:
+		return -EINVAL;
+	}
+	ret = phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE, adv);
+	if (ret < 0)
+		return ret;
+	ret = phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_VEND_PROV, vend);
+	if (ret < 0)
+		return ret;
+	ret = phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL, ctrl10);
+	if (ret < 0)
+		return ret;
+
+	/* set by vendor driver, but should be on by default */
+	ret = phy_set_bits_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1,
+			       MDIO_AN_CTRL1_XNP);
+	if (ret < 0)
+		return ret;
+
+	return genphy_c45_an_disable_aneg(phydev);
+}
+
+static int aqr105_config_aneg(struct phy_device *phydev)
+{
+	bool changed = false;
+	u16 reg;
+	int ret;
+
+	ret = aqr_set_mdix(phydev, phydev->mdix_ctrl);
+	if (ret < 0)
+		return ret;
+	if (ret > 0)
+		changed = true;
+
+	if (phydev->autoneg == AUTONEG_DISABLE)
+		return aqr105_setup_forced(phydev);
+
+	ret = genphy_c45_an_config_aneg(phydev);
+	if (ret < 0)
+		return ret;
+	if (ret > 0)
+		changed = true;
+
+	/* Clause 45 has no standardized support for 1000BaseT, therefore
+	 * use vendor registers for this mode.
+	 */
+	reg = 0;
+	if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
+			      phydev->advertising))
+		reg |= MDIO_AN_VEND_PROV_1000BASET_FULL;
+
+	if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT,
+			      phydev->advertising))
+		reg |= MDIO_AN_VEND_PROV_1000BASET_HALF;
+
+	/* Handle the case when the 2.5G and 5G speeds are not advertised */
+	if (linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
+			      phydev->advertising))
+		reg |= MDIO_AN_VEND_PROV_2500BASET_FULL;
+
+	if (linkmode_test_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT,
+			      phydev->advertising))
+		reg |= MDIO_AN_VEND_PROV_5000BASET_FULL;
+
+	ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_VEND_PROV,
+				     MDIO_AN_VEND_PROV_1000BASET_HALF |
+				     MDIO_AN_VEND_PROV_1000BASET_FULL |
+				     MDIO_AN_VEND_PROV_2500BASET_FULL |
+				     MDIO_AN_VEND_PROV_5000BASET_FULL, reg);
+	if (ret < 0)
+		return ret;
+	if (ret > 0)
+		changed = true;
+
+	return genphy_c45_check_and_restart_aneg(phydev, changed);
+}
+
+static int aqr105_read_rate(struct phy_device *phydev)
+{
+	int val;
+
+	val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_TX_VEND_STATUS1);
+	if (val < 0)
+		return val;
+
+	if (val & MDIO_AN_TX_VEND_STATUS1_FULL_DUPLEX)
+		phydev->duplex = DUPLEX_FULL;
+	else
+		phydev->duplex = DUPLEX_HALF;
+
+	switch (FIELD_GET(MDIO_AN_TX_VEND_STATUS1_RATE_MASK, val)) {
+	case MDIO_AN_TX_VEND_STATUS1_10BASET:
+		phydev->speed = SPEED_10;
+		break;
+	case MDIO_AN_TX_VEND_STATUS1_100BASETX:
+		phydev->speed = SPEED_100;
+		break;
+	case MDIO_AN_TX_VEND_STATUS1_1000BASET:
+		phydev->speed = SPEED_1000;
+		break;
+	case MDIO_AN_TX_VEND_STATUS1_2500BASET:
+		phydev->speed = SPEED_2500;
+		break;
+	case MDIO_AN_TX_VEND_STATUS1_5000BASET:
+		phydev->speed = SPEED_5000;
+		break;
+	case MDIO_AN_TX_VEND_STATUS1_10GBASET:
+		phydev->speed = SPEED_10000;
+		break;
+	default:
+		phydev->speed = SPEED_UNKNOWN;
+	}
+
+	return 0;
+}
+
+static int aqr105_read_status(struct phy_device *phydev)
+{
+	int ret;
+	int val;
+
+	ret = aqr_read_status(phydev);
+	if (ret)
+		return ret;
+
+	if (!phydev->link || phydev->autoneg == AUTONEG_DISABLE)
+		return 0;
+
+	/**
+	 * The status register is not immediately correct on line side link up.
+	 * Poll periodically until it reflects the correct ON state.
+	 * Only return fail for read error, timeout defaults to OFF state.
+	 */
+	ret = phy_read_mmd_poll_timeout(phydev, MDIO_MMD_PHYXS,
+					MDIO_PHYXS_VEND_IF_STATUS, val,
+					(FIELD_GET(MDIO_PHYXS_VEND_IF_STATUS_TYPE_MASK, val) !=
+					MDIO_PHYXS_VEND_IF_STATUS_TYPE_OFF),
+					AQR107_OP_IN_PROG_SLEEP,
+					AQR107_OP_IN_PROG_TIMEOUT, false);
+	if (ret && ret != -ETIMEDOUT)
+		return ret;
+
+	switch (FIELD_GET(MDIO_PHYXS_VEND_IF_STATUS_TYPE_MASK, val)) {
+	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_KR:
+		phydev->interface = PHY_INTERFACE_MODE_10GKR;
+		break;
+	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_KX:
+		phydev->interface = PHY_INTERFACE_MODE_1000BASEKX;
+		break;
+	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_XFI:
+		phydev->interface = PHY_INTERFACE_MODE_10GBASER;
+		break;
+	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_USXGMII:
+		phydev->interface = PHY_INTERFACE_MODE_USXGMII;
+		break;
+	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_XAUI:
+		phydev->interface = PHY_INTERFACE_MODE_XAUI;
+		break;
+	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_SGMII:
+		phydev->interface = PHY_INTERFACE_MODE_SGMII;
+		break;
+	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_RXAUI:
+		phydev->interface = PHY_INTERFACE_MODE_RXAUI;
+		break;
+	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_OCSGMII:
+		phydev->interface = PHY_INTERFACE_MODE_2500BASEX;
+		break;
+	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_OFF:
+	default:
+		phydev->link = false;
+		phydev->interface = PHY_INTERFACE_MODE_NA;
+		break;
+	}
+
+	/* Read rate from vendor register */
+	return aqr105_read_rate(phydev);
+}
+
 static int aqr107_read_rate(struct phy_device *phydev)
 {
 	u32 config_reg;
@@ -911,11 +1144,13 @@ static struct phy_driver aqr_driver[] = {
 {
 	PHY_ID_MATCH_MODEL(PHY_ID_AQR105),
 	.name		= "Aquantia AQR105",
-	.config_aneg    = aqr_config_aneg,
+	.get_features	= aqr105_get_features,
 	.probe		= aqr107_probe,
+	.config_init	= aqr107_config_init,
+	.config_aneg    = aqr105_config_aneg,
 	.config_intr	= aqr_config_intr,
 	.handle_interrupt = aqr_handle_interrupt,
-	.read_status	= aqr_read_status,
+	.read_status	= aqr105_read_status,
 	.suspend	= aqr107_suspend,
 	.resume		= aqr107_resume,
 },