USB: serial: pl2303: clean up type detection

Clean up the type detection somewhat in preparation for adding support
for more types.

Note this also fixes the type debug printk for the new HXN type.

Signed-off-by: Johan Hovold <johan@kernel.org>

drivers/usb/serial/pl2303.c

@@ -362,49 +362,65 @@ static int pl2303_calc_num_ports(struct usb_serial *serial,
 	return 1;
 }
 
+static enum pl2303_type pl2303_detect_type(struct usb_serial *serial)
+{
+	struct usb_device_descriptor *desc = &serial->dev->descriptor;
+	int ret;
+	u8 buf;
+
+	/*
+	 * Legacy types 0 and 1, difference unknown.
+	 */
+	if (desc->bDeviceClass == 0x02)
+		return TYPE_01;		/* type 0 */
+
+	if (desc->bMaxPacketSize0 != 0x40) {
+		if (desc->bDeviceClass == 0x00 || desc->bDeviceClass == 0xff)
+			return TYPE_01;	/* type 1 */
+
+		return TYPE_01;		/* type 0 */
+	}
+
+	/*
+	 * Assume it's an HXN-type if the device doesn't support the old read
+	 * request value.
+	 */
+	ret = usb_control_msg_recv(serial->dev, 0, VENDOR_READ_REQUEST,
+			VENDOR_READ_REQUEST_TYPE, PL2303_READ_TYPE_HX_STATUS,
+			0, &buf, 1, 100, GFP_KERNEL);
+	if (ret)
+		return TYPE_HXN;
+
+	return TYPE_HX;
+}
+
 static int pl2303_startup(struct usb_serial *serial)
 {
 	struct pl2303_serial_private *spriv;
-	enum pl2303_type type = TYPE_01;
+	enum pl2303_type type;
 	unsigned char *buf;
-	int res;
 
 	spriv = kzalloc(sizeof(*spriv), GFP_KERNEL);
 	if (!spriv)
 		return -ENOMEM;
 
-	buf = kmalloc(1, GFP_KERNEL);
-	if (!buf) {
-		kfree(spriv);
-		return -ENOMEM;
-	}
+	type = pl2303_detect_type(serial);
 
-	if (serial->dev->descriptor.bDeviceClass == 0x02)
-		type = TYPE_01;		/* type 0 */
-	else if (serial->dev->descriptor.bMaxPacketSize0 == 0x40)
-		type = TYPE_HX;
-	else if (serial->dev->descriptor.bDeviceClass == 0x00)
-		type = TYPE_01;		/* type 1 */
-	else if (serial->dev->descriptor.bDeviceClass == 0xFF)
-		type = TYPE_01;		/* type 1 */
 	dev_dbg(&serial->interface->dev, "device type: %d\n", type);
 
-	if (type == TYPE_HX) {
-		res = usb_control_msg(serial->dev,
-				usb_rcvctrlpipe(serial->dev, 0),
-				VENDOR_READ_REQUEST, VENDOR_READ_REQUEST_TYPE,
-				PL2303_READ_TYPE_HX_STATUS, 0, buf, 1, 100);
-		if (res != 1)
-			type = TYPE_HXN;
-	}
-
 	spriv->type = &pl2303_type_data[type];
 	spriv->quirks = (unsigned long)usb_get_serial_data(serial);
 	spriv->quirks |= spriv->type->quirks;
 
 	usb_set_serial_data(serial, spriv);
 
 	if (type != TYPE_HXN) {
+		buf = kmalloc(1, GFP_KERNEL);
+		if (!buf) {
+			kfree(spriv);
+			return -ENOMEM;
+		}
+
 		pl2303_vendor_read(serial, 0x8484, buf);
 		pl2303_vendor_write(serial, 0x0404, 0);
 		pl2303_vendor_read(serial, 0x8484, buf);
@@ -419,9 +435,9 @@ static int pl2303_startup(struct usb_serial *serial)
 			pl2303_vendor_write(serial, 2, 0x24);
 		else
 			pl2303_vendor_write(serial, 2, 0x44);
-	}
 
-	kfree(buf);
+		kfree(buf);
+	}
 
 	return 0;
 }