diff --git a/drivers/dma/stm32/stm32-dma3.c b/drivers/dma/stm32/stm32-dma3.c
index fc874fec729df..0c6c4258b1956 100644
--- a/drivers/dma/stm32/stm32-dma3.c
+++ b/drivers/dma/stm32/stm32-dma3.c
@@ -230,6 +230,8 @@ enum stm32_dma3_port_data_width {
 #define STM32_DMA3_CFG_SET_BOTH		(STM32_DMA3_CFG_SET_DT | STM32_DMA3_CFG_SET_DMA)
 
 #define STM32_DMA3_MAX_BLOCK_SIZE	ALIGN_DOWN(CBR1_BNDT, 64)
+#define STM32_DMA3_MAX_BURST_LEN	(1 + min_t(u32, FIELD_MAX(CTR1_SBL_1), \
+							FIELD_MAX(CTR1_DBL_1)))
 #define port_is_ahb(maxdw)		({ typeof(maxdw) (_maxdw) = (maxdw); \
 					   ((_maxdw) != DW_INVALID) && ((_maxdw) == DW_32); })
 #define port_is_axi(maxdw)		({ typeof(maxdw) (_maxdw) = (maxdw); \
@@ -295,6 +297,10 @@ struct stm32_dma3_chan {
 	u32 dma_status;
 };
 
+struct stm32_dma3_pdata {
+	u32 axi_max_burst_len;
+};
+
 struct stm32_dma3_ddata {
 	struct dma_device dma_dev;
 	void __iomem *base;
@@ -303,6 +309,7 @@ struct stm32_dma3_ddata {
 	u32 dma_channels;
 	u32 dma_requests;
 	enum stm32_dma3_port_data_width ports_max_dw[2];
+	u32 axi_max_burst_len;
 };
 
 static inline struct stm32_dma3_ddata *to_stm32_dma3_ddata(struct stm32_dma3_chan *chan)
@@ -535,7 +542,8 @@ static enum dma_slave_buswidth stm32_dma3_get_max_dw(u32 chan_max_burst,
 	return 1 << __ffs(len | addr | max_dw);
 }
 
-static u32 stm32_dma3_get_max_burst(u32 len, enum dma_slave_buswidth dw, u32 chan_max_burst)
+static u32 stm32_dma3_get_max_burst(u32 len, enum dma_slave_buswidth dw,
+				    u32 chan_max_burst, u32 bus_max_burst)
 {
 	u32 max_burst = chan_max_burst ? chan_max_burst / dw : 1;
 
@@ -546,8 +554,9 @@ static u32 stm32_dma3_get_max_burst(u32 len, enum dma_slave_buswidth dw, u32 cha
 	/*
 	 * HW doesn't modify the burst if burst size <= half of the fifo size.
 	 * If len is not a multiple of burst size, last burst is shortened by HW.
+	 * Take care of maximum burst supported on interconnect bus.
 	 */
-	return max_burst;
+	return min_t(u32, max_burst, bus_max_burst);
 }
 
 static int stm32_dma3_chan_prep_hw(struct stm32_dma3_chan *chan, enum dma_transfer_direction dir,
@@ -556,6 +565,7 @@ static int stm32_dma3_chan_prep_hw(struct stm32_dma3_chan *chan, enum dma_transf
 {
 	struct stm32_dma3_ddata *ddata = to_stm32_dma3_ddata(chan);
 	struct dma_device dma_device = ddata->dma_dev;
+	u32 src_max_burst = STM32_DMA3_MAX_BURST_LEN, dst_max_burst = STM32_DMA3_MAX_BURST_LEN;
 	u32 sdw, ddw, sbl_max, dbl_max, tcem, init_dw, init_bl_max;
 	u32 _ctr1 = 0, _ctr2 = 0;
 	u32 ch_conf = chan->dt_config.ch_conf;
@@ -596,10 +606,14 @@ static int stm32_dma3_chan_prep_hw(struct stm32_dma3_chan *chan, enum dma_transf
 		_ctr1 |= CTR1_SINC;
 	if (sap)
 		_ctr1 |= CTR1_SAP;
+	if (port_is_axi(sap_max_dw)) /* AXI - apply axi maximum burst limitation */
+		src_max_burst = ddata->axi_max_burst_len;
 	if (FIELD_GET(STM32_DMA3_DT_DINC, tr_conf))
 		_ctr1 |= CTR1_DINC;
 	if (dap)
 		_ctr1 |= CTR1_DAP;
+	if (port_is_axi(dap_max_dw)) /* AXI - apply axi maximum burst limitation */
+		dst_max_burst = ddata->axi_max_burst_len;
 
 	_ctr2 |= FIELD_PREP(CTR2_REQSEL, chan->dt_config.req_line) & ~CTR2_SWREQ;
 	if (FIELD_GET(STM32_DMA3_DT_BREQ, tr_conf))
@@ -619,11 +633,12 @@ static int stm32_dma3_chan_prep_hw(struct stm32_dma3_chan *chan, enum dma_transf
 		/* Set destination (device) data width and burst */
 		ddw = min_t(u32, ddw, stm32_dma3_get_max_dw(chan->max_burst, dap_max_dw,
 							    len, dst_addr));
-		dbl_max = min_t(u32, dbl_max, stm32_dma3_get_max_burst(len, ddw, chan->max_burst));
+		dbl_max = min_t(u32, dbl_max, stm32_dma3_get_max_burst(len, ddw, chan->max_burst,
+								       dst_max_burst));
 
 		/* Set source (memory) data width and burst */
 		sdw = stm32_dma3_get_max_dw(chan->max_burst, sap_max_dw, len, src_addr);
-		sbl_max = stm32_dma3_get_max_burst(len, sdw, chan->max_burst);
+		sbl_max = stm32_dma3_get_max_burst(len, sdw, chan->max_burst, src_max_burst);
 		if (!!FIELD_GET(STM32_DMA3_DT_NOPACK, tr_conf)) {
 			sdw = ddw;
 			sbl_max = dbl_max;
@@ -653,11 +668,12 @@ static int stm32_dma3_chan_prep_hw(struct stm32_dma3_chan *chan, enum dma_transf
 		/* Set source (device) data width and burst */
 		sdw = min_t(u32, sdw, stm32_dma3_get_max_dw(chan->max_burst, sap_max_dw,
 							    len, src_addr));
-		sbl_max = min_t(u32, sbl_max, stm32_dma3_get_max_burst(len, sdw, chan->max_burst));
+		sbl_max = min_t(u32, sbl_max, stm32_dma3_get_max_burst(len, sdw, chan->max_burst,
+								       src_max_burst));
 
 		/* Set destination (memory) data width and burst */
 		ddw = stm32_dma3_get_max_dw(chan->max_burst, dap_max_dw, len, dst_addr);
-		dbl_max = stm32_dma3_get_max_burst(len, ddw, chan->max_burst);
+		dbl_max = stm32_dma3_get_max_burst(len, ddw, chan->max_burst, dst_max_burst);
 		if (!!FIELD_GET(STM32_DMA3_DT_NOPACK, tr_conf) ||
 		    ((_ctr2 & CTR2_PFREQ) && ddw > sdw)) { /* Packing to wider ddw not supported */
 			ddw = sdw;
@@ -689,22 +705,24 @@ static int stm32_dma3_chan_prep_hw(struct stm32_dma3_chan *chan, enum dma_transf
 		init_dw = sdw;
 		init_bl_max = sbl_max;
 		sdw = stm32_dma3_get_max_dw(chan->max_burst, sap_max_dw, len, src_addr);
-		sbl_max = stm32_dma3_get_max_burst(len, sdw, chan->max_burst);
+		sbl_max = stm32_dma3_get_max_burst(len, sdw, chan->max_burst, src_max_burst);
 		if (chan->config_set & STM32_DMA3_CFG_SET_DMA) {
 			sdw = min_t(u32, init_dw, sdw);
-			sbl_max = min_t(u32, init_bl_max,
-					stm32_dma3_get_max_burst(len, sdw, chan->max_burst));
+			sbl_max = min_t(u32, init_bl_max, stm32_dma3_get_max_burst(len, sdw,
+										   chan->max_burst,
+										   src_max_burst));
 		}
 
 		/* Set destination (memory) data width and burst */
 		init_dw = ddw;
 		init_bl_max = dbl_max;
 		ddw = stm32_dma3_get_max_dw(chan->max_burst, dap_max_dw, len, dst_addr);
-		dbl_max = stm32_dma3_get_max_burst(len, ddw, chan->max_burst);
+		dbl_max = stm32_dma3_get_max_burst(len, ddw, chan->max_burst, dst_max_burst);
 		if (chan->config_set & STM32_DMA3_CFG_SET_DMA) {
 			ddw = min_t(u32, init_dw, ddw);
-			dbl_max = min_t(u32, init_bl_max,
-					stm32_dma3_get_max_burst(len, ddw, chan->max_burst));
+			dbl_max = min_t(u32, init_bl_max, stm32_dma3_get_max_burst(len, ddw,
+										   chan->max_burst,
+										   dst_max_burst));
 		}
 
 		_ctr1 |= FIELD_PREP(CTR1_SDW_LOG2, ilog2(sdw));
@@ -1647,8 +1665,12 @@ static u32 stm32_dma3_check_rif(struct stm32_dma3_ddata *ddata)
 	return chan_reserved;
 }
 
+static struct stm32_dma3_pdata stm32mp25_pdata = {
+	.axi_max_burst_len = 16,
+};
+
 static const struct of_device_id stm32_dma3_of_match[] = {
-	{ .compatible = "st,stm32mp25-dma3", },
+	{ .compatible = "st,stm32mp25-dma3", .data = &stm32mp25_pdata, },
 	{ /* sentinel */ },
 };
 MODULE_DEVICE_TABLE(of, stm32_dma3_of_match);
@@ -1656,6 +1678,7 @@ MODULE_DEVICE_TABLE(of, stm32_dma3_of_match);
 static int stm32_dma3_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
+	const struct stm32_dma3_pdata *pdata;
 	struct stm32_dma3_ddata *ddata;
 	struct reset_control *reset;
 	struct stm32_dma3_chan *chan;
@@ -1750,6 +1773,16 @@ static int stm32_dma3_probe(struct platform_device *pdev)
 	else /* Dual master ports */
 		ddata->ports_max_dw[1] = FIELD_GET(G_M1_DATA_WIDTH_ENC, hwcfgr);
 
+	/* axi_max_burst_len is optional, if not defined, use STM32_DMA3_MAX_BURST_LEN  */
+	ddata->axi_max_burst_len = STM32_DMA3_MAX_BURST_LEN;
+	pdata = device_get_match_data(&pdev->dev);
+	if (pdata && pdata->axi_max_burst_len) {
+		ddata->axi_max_burst_len = min_t(u32, pdata->axi_max_burst_len,
+						 STM32_DMA3_MAX_BURST_LEN);
+		dev_dbg(&pdev->dev, "Burst is limited to %u beats through AXI port\n",
+			ddata->axi_max_burst_len);
+	}
+
 	ddata->chans = devm_kcalloc(&pdev->dev, ddata->dma_channels, sizeof(*ddata->chans),
 				    GFP_KERNEL);
 	if (!ddata->chans) {