From ed0f4b3ffcdbd2b47a0b24035bb6f22464c9fef1 Mon Sep 17 00:00:00 2001 From: Wenyou Yang <wenyou.yang@atmel.com> Date: Thu, 25 Jun 2015 18:13:49 +0800 Subject: [PATCH] ARM: dts: at91: sama5d2 Xplained: add leds node Add the three leds on the sama5d2 Xplained board with their pinctrl node. The blue led is positioned with the "heartbeat" trigger. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> [nicolas.ferre@atmel.com: add commit message and adapt to newer kernel] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> --- arch/arm/boot/dts/at91-sama5d2_xplained.dts | 30 +++++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts index d20d4033d64c9..2636b9e2d1243 100644 --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts @@ -307,6 +307,13 @@ bias-pull-up; }; + pinctrl_led_gpio_default: led_gpio_default { + pinmux = <PIN_PB0__GPIO>, + <PIN_PB5__GPIO>, + <PIN_PB6__GPIO>; + bias-pull-up; + }; + pinctrl_macb0_default: macb0_default { pinmux = <PIN_PB14__GTXCK>, <PIN_PB15__GTXEN>, @@ -418,4 +425,27 @@ linux,code = <0x104>; }; }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led_gpio_default>; + status = "okay"; + + red { + label = "red"; + gpios = <&pioA 38 GPIO_ACTIVE_LOW>; + }; + + green { + label = "green"; + gpios = <&pioA 37 GPIO_ACTIVE_LOW>; + }; + + blue { + label = "blue"; + gpios = <&pioA 32 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + }; };