Merge branch 'ab/tap'

* ab/tap:
  t/README: document more test helpers
  t/README: proposed rewording...
  t/README: Document the do's and don'ts of tests
  t/README: Add a section about skipping tests
  t/README: Document test_expect_code
  t/README: Document test_external*
  t/README: Document the prereq functions, and 3-arg test_*
  t/README: Typo: paralell -> parallel
  t/README: The trash is in 't/trash directory.$name'
  t/t9700/test.pl: don't access private object members, use public access methods
  t9700: Use Test::More->builder, not $Test::Builder::Test
  tests: Say "pass" rather than "ok" on empty lines for TAP
  tests: Skip tests in a way that makes sense under TAP
  test-lib: output a newline before "ok" under a TAP harness
  test-lib: Make the test_external_* functions TAP-aware
  test-lib: Adjust output to be valid TAP format

t/README

@@ -18,25 +18,48 @@ The easiest way to run tests is to say "make".  This runs all
 the tests.
 
     *** t0000-basic.sh ***
-    *   ok 1: .git/objects should be empty after git-init in an empty repo.
-    *   ok 2: .git/objects should have 256 subdirectories.
-    *   ok 3: git-update-index without --add should fail adding.
+    ok 1 - .git/objects should be empty after git init in an empty repo.
+    ok 2 - .git/objects should have 3 subdirectories.
+    ok 3 - success is reported like this
     ...
-    *   ok 23: no diff after checkout and git-update-index --refresh.
-    * passed all 23 test(s)
-    *** t0100-environment-names.sh ***
-    *   ok 1: using old names should issue warnings.
-    *   ok 2: using old names but having new names should not issue warnings.
-    ...
-
-Or you can run each test individually from command line, like
-this:
-
-    $ sh ./t3001-ls-files-killed.sh
-    *   ok 1: git-update-index --add to add various paths.
-    *   ok 2: git-ls-files -k to show killed files.
-    *   ok 3: validate git-ls-files -k output.
-    * passed all 3 test(s)
+    ok 43 - very long name in the index handled sanely
+    # fixed 1 known breakage(s)
+    # still have 1 known breakage(s)
+    # passed all remaining 42 test(s)
+    1..43
+    *** t0001-init.sh ***
+    ok 1 - plain
+    ok 2 - plain with GIT_WORK_TREE
+    ok 3 - plain bare
+
+Since the tests all output TAP (see http://testanything.org) they can
+be run with any TAP harness. Here's an example of parallel testing
+powered by a recent version of prove(1):
+
+    $ prove --timer --jobs 15 ./t[0-9]*.sh
+    [19:17:33] ./t0005-signals.sh ................................... ok       36 ms
+    [19:17:33] ./t0022-crlf-rename.sh ............................... ok       69 ms
+    [19:17:33] ./t0024-crlf-archive.sh .............................. ok      154 ms
+    [19:17:33] ./t0004-unwritable.sh ................................ ok      289 ms
+    [19:17:33] ./t0002-gitfile.sh ................................... ok      480 ms
+    ===(     102;0  25/?  6/?  5/?  16/?  1/?  4/?  2/?  1/?  3/?  1... )===
+
+prove and other harnesses come with a lot of useful options. The
+--state option in particular is very useful:
+
+    # Repeat until no more failures
+    $ prove -j 15 --state=failed,save ./t[0-9]*.sh
+
+You can also run each test individually from command line, like this:
+
+    $ sh ./t3010-ls-files-killed-modified.sh
+    ok 1 - git update-index --add to add various paths.
+    ok 2 - git ls-files -k to show killed files.
+    ok 3 - validate git ls-files -k output.
+    ok 4 - git ls-files -m to show modified files.
+    ok 5 - validate git ls-files -m output.
+    # passed all 5 test(s)
+    1..5
 
 You can pass --verbose (or -v), --debug (or -d), and --immediate
 (or -i) command line argument to the test, or by setting GIT_TEST_OPTS
@@ -198,15 +221,101 @@ This test harness library does the following things:
  - If the script is invoked with command line argument --help
    (or -h), it shows the test_description and exits.
 
- - Creates an empty test directory with an empty .git/objects
-   database and chdir(2) into it.  This directory is 't/trash directory'
-   if you must know, but I do not think you care.
+ - Creates an empty test directory with an empty .git/objects database
+   and chdir(2) into it.  This directory is 't/trash
+   directory.$test_name_without_dotsh', with t/ subject to change by
+   the --root option documented above.
 
  - Defines standard test helper functions for your scripts to
    use.  These functions are designed to make all scripts behave
    consistently when command line arguments --verbose (or -v),
    --debug (or -d), and --immediate (or -i) is given.
 
+Do's, don'ts & things to keep in mind
+-------------------------------------
+
+Here are a few examples of things you probably should and shouldn't do
+when writing tests.
+
+Do:
+
+ - Put all code inside test_expect_success and other assertions.
+
+   Even code that isn't a test per se, but merely some setup code
+   should be inside a test assertion.
+
+ - Chain your test assertions
+
+   Write test code like this:
+
+	git merge foo &&
+	git push bar &&
+	test ...
+
+   Instead of:
+
+	git merge hla
+	git push gh
+	test ...
+
+   That way all of the commands in your tests will succeed or fail. If
+   you must ignore the return value of something (e.g. the return
+   value of export is unportable) it's best to indicate so explicitly
+   with a semicolon:
+
+	export HLAGH;
+	git merge hla &&
+	git push gh &&
+	test ...
+
+Don't:
+
+ - exit() within a <script> part.
+
+   The harness will catch this as a programming error of the test.
+   Use test_done instead if you need to stop the tests early (see
+   "Skipping tests" below).
+
+ - Break the TAP output
+
+   The raw output from your test may be interpreted by a TAP harness. TAP
+   harnesses will ignore everything they don't know about, but don't step
+   on their toes in these areas:
+
+   - Don't print lines like "$x..$y" where $x and $y are integers.
+
+   - Don't print lines that begin with "ok" or "not ok".
+
+   TAP harnesses expect a line that begins with either "ok" and "not
+   ok" to signal a test passed or failed (and our harness already
+   produces such lines), so your script shouldn't emit such lines to
+   their output.
+
+   You can glean some further possible issues from the TAP grammar
+   (see http://search.cpan.org/perldoc?TAP::Parser::Grammar#TAP_Grammar)
+   but the best indication is to just run the tests with prove(1),
+   it'll complain if anything is amiss.
+
+Keep in mind:
+
+ - Inside <script> part, the standard output and standard error
+   streams are discarded, and the test harness only reports "ok" or
+   "not ok" to the end user running the tests. Under --verbose, they
+   are shown to help debugging the tests.
+
+
+Skipping tests
+--------------
+
+If you need to skip all the remaining tests you should set skip_all
+and immediately call test_done. The string you give to skip_all will
+be used as an explanation for why the test was skipped. for instance:
+
+	if ! test_have_prereq PERL
+	then
+	    skip_all='skipping perl interface tests, perl not available'
+	    test_done
+	fi
 
 End with test_done
 ------------------
@@ -222,9 +331,9 @@ Test harness library
 There are a handful helper functions defined in the test harness
 library for your script to use.
 
- - test_expect_success <message> <script>
+ - test_expect_success [<prereq>] <message> <script>
 
-   This takes two strings as parameter, and evaluates the
+   Usually takes two strings as parameter, and evaluates the
    <script>.  If it yields success, test is considered
    successful.  <message> should state what it is testing.
 
@@ -234,7 +343,14 @@ library for your script to use.
 	    'git-write-tree should be able to write an empty tree.' \
 	    'tree=$(git-write-tree)'
 
- - test_expect_failure <message> <script>
+   If you supply three parameters the first will be taken to be a
+   prerequisite, see the test_set_prereq and test_have_prereq
+   documentation below:
+
+	test_expect_success TTY 'git --paginate rev-list uses a pager' \
+	    ' ... '
+
+ - test_expect_failure [<prereq>] <message> <script>
 
    This is NOT the opposite of test_expect_success, but is used
    to mark a test that demonstrates a known breakage.  Unlike
@@ -243,6 +359,16 @@ library for your script to use.
    success and "still broken" on failure.  Failures from these
    tests won't cause -i (immediate) to stop.
 
+   Like test_expect_success this function can optionally use a three
+   argument invocation with a prerequisite as the first argument.
+
+ - test_expect_code [<prereq>] <code> <message> <script>
+
+   Analogous to test_expect_success, but pass the test if it exits
+   with a given exit <code>
+
+ test_expect_code 1 'Merge with d/f conflicts' 'git merge "merge msg" B master'
+
  - test_debug <script>
 
    This takes a single argument, <script>, and evaluates it only
@@ -275,6 +401,85 @@ library for your script to use.
    Merges the given rev using the given message.  Like test_commit,
    creates a tag and calls test_tick before committing.
 
+ - test_set_prereq SOME_PREREQ
+
+   Set a test prerequisite to be used later with test_have_prereq. The
+   test-lib will set some prerequisites for you, e.g. PERL and PYTHON
+   which are derived from ./GIT-BUILD-OPTIONS (grep test_set_prereq
+   test-lib.sh for more). Others you can set yourself and use later
+   with either test_have_prereq directly, or the three argument
+   invocation of test_expect_success and test_expect_failure.
+
+ - test_have_prereq SOME PREREQ
+
+   Check if we have a prerequisite previously set with
+   test_set_prereq. The most common use of this directly is to skip
+   all the tests if we don't have some essential prerequisite:
+
+	if ! test_have_prereq PERL
+	then
+	    skip_all='skipping perl interface tests, perl not available'
+	    test_done
+	fi
+
+ - test_external [<prereq>] <message> <external> <script>
+
+   Execute a <script> with an <external> interpreter (like perl). This
+   was added for tests like t9700-perl-git.sh which do most of their
+   work in an external test script.
+
+	test_external \
+	    'GitwebCache::*FileCache*' \
+	    "$PERL_PATH" "$TEST_DIRECTORY"/t9503/test_cache_interface.pl
+
+   If the test is outputting its own TAP you should set the
+   test_external_has_tap variable somewhere before calling the first
+   test_external* function. See t9700-perl-git.sh for an example.
+
+	# The external test will outputs its own plan
+	test_external_has_tap=1
+
+ - test_external_without_stderr [<prereq>] <message> <external> <script>
+
+   Like test_external but fail if there's any output on stderr,
+   instead of checking the exit code.
+
+	test_external_without_stderr \
+	    'Perl API' \
+	    "$PERL_PATH" "$TEST_DIRECTORY"/t9700/test.pl
+
+ - test_must_fail <git-command>
+
+   Run a git command and ensure it fails in a controlled way.  Use
+   this instead of "! <git-command>" to fail when git commands
+   segfault.
+
+ - test_might_fail <git-command>
+
+   Similar to test_must_fail, but tolerate success, too.  Use this
+   instead of "<git-command> || :" to catch failures due to segv.
+
+ - test_cmp <expected> <actual>
+
+   Check whether the content of the <actual> file matches the
+   <expected> file.  This behaves like "cmp" but produces more
+   helpful output when the test is run with "-v" option.
+
+ - test_when_finished <script>
+
+   Prepend <script> to a list of commands to run to clean up
+   at the end of the current test.  If some clean-up command
+   fails, the test will not pass.
+
+   Example:
+
+	test_expect_success 'branch pointing to non-commit' '
+		git rev-parse HEAD^{tree} >.git/refs/heads/invalid &&
+		test_when_finished "git update-ref -d refs/heads/invalid" &&
+		...
+	'
+
+
 Tips for Writing Tests
 ----------------------
 

t/lib-git-svn.sh

@@ -5,11 +5,11 @@ git_svn_id=git""-svn-id
 
 if test -n "$NO_SVN_TESTS"
 then
-	say 'skipping git svn tests, NO_SVN_TESTS defined'
+	skip_all='skipping git svn tests, NO_SVN_TESTS defined'
 	test_done
 fi
 if ! test_have_prereq PERL; then
-	say 'skipping git svn tests, perl not available'
+	skip_all='skipping git svn tests, perl not available'
 	test_done
 fi
 

t/lib-httpd.sh

@@ -5,8 +5,7 @@
 
 if test -z "$GIT_TEST_HTTPD"
 then
-	say "skipping test, network testing disabled by default"
-	say "(define GIT_TEST_HTTPD to enable)"
+	skip_all="Network testing disabled (define GIT_TEST_HTTPD to enable)"
 	test_done
 fi
 

t/t1020-subdirectory.sh

@@ -24,18 +24,18 @@ test_expect_success 'update-index and ls-files' '
 	cd "$HERE" &&
 	git update-index --add one &&
 	case "`git ls-files`" in
-	one) echo ok one ;;
+	one) echo pass one ;;
 	*) echo bad one; exit 1 ;;
 	esac &&
 	cd dir &&
 	git update-index --add two &&
 	case "`git ls-files`" in
-	two) echo ok two ;;
+	two) echo pass two ;;
 	*) echo bad two; exit 1 ;;
 	esac &&
 	cd .. &&
 	case "`git ls-files`" in
-	dir/two"$LF"one) echo ok both ;;
+	dir/two"$LF"one) echo pass both ;;
 	*) echo bad; exit 1 ;;
 	esac
 '
@@ -58,17 +58,17 @@ test_expect_success 'diff-files' '
 	echo a >>one &&
 	echo d >>dir/two &&
 	case "`git diff-files --name-only`" in
-	dir/two"$LF"one) echo ok top ;;
+	dir/two"$LF"one) echo pass top ;;
 	*) echo bad top; exit 1 ;;
 	esac &&
 	# diff should not omit leading paths
 	cd dir &&
 	case "`git diff-files --name-only`" in
-	dir/two"$LF"one) echo ok subdir ;;
+	dir/two"$LF"one) echo pass subdir ;;
 	*) echo bad subdir; exit 1 ;;
 	esac &&
 	case "`git diff-files --name-only .`" in
-	dir/two) echo ok subdir limited ;;
+	dir/two) echo pass subdir limited ;;
 	*) echo bad subdir limited; exit 1 ;;
 	esac
 '

t/t1304-default-acl.sh

@@ -15,9 +15,12 @@ umask 077
 # is a good candidate: exists on all unices, and it has permission
 # anyway, so we don't create a security hole running the testsuite.
 
-if ! setfacl -m u:root:rwx .; then
-    say "Skipping ACL tests: unable to use setfacl"
-    test_done
+setfacl_out="$(setfacl -m u:root:rwx . 2>&1)"
+setfacl_ret=$?
+
+if [ $setfacl_ret != 0 ]; then
+	skip_all="Skipping ACL tests: unable to use setfacl (output: '$setfacl_out'; return code: '$setfacl_ret')"
+	test_done
 fi
 
 check_perms_and_acl () {