Rename .git/rebase to .git/rebase-apply

With git-am, it sounds awkward to have the patches in ".git/rebase/",
but for technical reasons, we have to keep the same directory name
for git-am and git-rebase. ".git/rebase-apply" seems to be a good
compromise.

Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

Documentation/SubmittingPatches

@@ -301,7 +301,7 @@ If it does not apply correctly, there can be various reasons.
   patch appropriately.
 
 * Your MUA corrupted your patch; "am" would complain that
-  the patch does not apply.  Look at .git/rebase/ subdirectory and
+  the patch does not apply.  Look at .git/rebase-apply/ subdirectory and
   see what 'patch' file contains and check for the common
   corruption patterns mentioned above.
 

Documentation/git-am.txt

@@ -143,9 +143,9 @@ aborts in the middle,.  You can recover from this in one of two ways:
   the index file to bring it in a state that the patch should
   have produced.  Then run the command with '--resolved' option.
 
-The command refuses to process new mailboxes while `.git/rebase`
+The command refuses to process new mailboxes while `.git/rebase-apply`
 directory exists, so if you decide to start over from scratch,
-run `rm -f -r .git/rebase` before running the command with mailbox
+run `rm -f -r .git/rebase-apply` before running the command with mailbox
 names.
 
 Before any patches are applied, ORIG_HEAD is set to the tip of the

Documentation/git-rebase.txt

@@ -39,8 +39,8 @@ It is possible that a merge failure will prevent this process from being
 completely automatic.  You will have to resolve any such merge failure
 and run `git rebase --continue`.  Another option is to bypass the commit
 that caused the merge failure with `git rebase --skip`.  To restore the
-original <branch> and remove the .git/rebase working files, use the command
-`git rebase --abort` instead.
+original <branch> and remove the .git/rebase-apply working files, use the
+command `git rebase --abort` instead.
 
 Assume the following history exists and the current branch is "topic":
 

Documentation/user-manual.txt

@@ -2431,7 +2431,7 @@ $ git rebase origin
 -------------------------------------------------
 
 This will remove each of your commits from mywork, temporarily saving
-them as patches (in a directory named ".git/rebase"), update mywork to
+them as patches (in a directory named ".git/rebase-apply"), update mywork to
 point at the latest version of origin, then apply each of the saved
 patches to the new mywork.  The result will look like:
 

contrib/completion/git-completion.bash

@@ -73,12 +73,12 @@ __git_ps1 ()
 	if [ -n "$g" ]; then
 		local r
 		local b
-		if [ -d "$g/rebase" ]
+		if [ -d "$g/rebase-apply" ]
 		then
-			if test -f "$g/rebase/rebasing"
+			if test -f "$g/rebase-apply/rebasing"
 			then
 				r="|REBASE"
-			elif test -f "$g/rebase/applying"
+			elif test -f "$g/rebase-apply/applying"
 			then
 				r="|AM"
 			else
@@ -488,7 +488,7 @@ __git_whitespacelist="nowarn warn error error-all strip"
 _git_am ()
 {
 	local cur="${COMP_WORDS[COMP_CWORD]}" dir="$(__gitdir)"
-	if [ -d "$dir"/rebase ]; then
+	if [ -d "$dir"/rebase-apply ]; then
 		__gitcomp "--skip --resolved"
 		return
 	fi
@@ -915,7 +915,7 @@ _git_push ()
 _git_rebase ()
 {
 	local cur="${COMP_WORDS[COMP_CWORD]}" dir="$(__gitdir)"
-	if [ -d "$dir"/rebase ] || [ -d "$dir"/rebase-merge ]; then
+	if [ -d "$dir"/rebase-apply ] || [ -d "$dir"/rebase-merge ]; then
 		__gitcomp "--continue --skip --abort"
 		return
 	fi

contrib/emacs/git.el

@@ -1252,8 +1252,8 @@ Return the list of files that haven't been handled."
        "\n")
       (when subject (insert subject "\n\n"))
       (cond (msg (insert msg "\n"))
-            ((file-readable-p ".git/rebase/msg")
-             (insert-file-contents ".git/rebase/msg"))
+            ((file-readable-p ".git/rebase-apply/msg")
+             (insert-file-contents ".git/rebase-apply/msg"))
             ((file-readable-p ".git/MERGE_MSG")
              (insert-file-contents ".git/MERGE_MSG")))
       ; delete empty lines at end
@@ -1272,9 +1272,9 @@ Return the list of files that haven't been handled."
           (coding-system (git-get-commits-coding-system))
           author-name author-email subject date)
       (when (eq 0 (buffer-size buffer))
-        (when (file-readable-p ".git/rebase/info")
+        (when (file-readable-p ".git/rebase-apply/info")
           (with-temp-buffer
-            (insert-file-contents ".git/rebase/info")
+            (insert-file-contents ".git/rebase-apply/info")
             (goto-char (point-min))
             (when (re-search-forward "^Author: \\(.*\\)\nEmail: \\(.*\\)$" nil t)
               (setq author-name (match-string 1))

git-am.sh

@@ -121,7 +121,7 @@ It does not apply to blobs recorded in its index."
 }
 
 prec=4
-dotest="$GIT_DIR/rebase"
+dotest="$GIT_DIR/rebase-apply"
 sign= utf8=t keep= skip= interactive= resolved= binary= rebasing= abort=
 resolvemsg= resume=
 git_apply_opt=

git-quiltimport.sh

@@ -53,7 +53,7 @@ if ! [ -d "$QUILT_PATCHES" ] ; then
 fi
 
 # Temporary directories
-tmp_dir="$GIT_DIR"/rebase
+tmp_dir="$GIT_DIR"/rebase-apply
 tmp_msg="$tmp_dir/msg"
 tmp_patch="$tmp_dir/patch"
 tmp_info="$tmp_dir/info"

git-rebase.sh

@@ -14,8 +14,8 @@ It is possible that a merge failure will prevent this process from being
 completely automatic.  You will have to resolve any such merge failure
 and run git rebase --continue.  Another option is to bypass the commit
 that caused the merge failure with git rebase --skip.  To restore the
-original <branch> and remove the .git/rebase working files, use the command
-git rebase --abort instead.
+original <branch> and remove the .git/rebase-apply working files, use the
+command git rebase --abort instead.
 
 Note that if <branch> is not specified on the command line, the
 currently checked out branch is used.
@@ -150,7 +150,7 @@ while test $# != 0
 do
 	case "$1" in
 	--continue)
-		test -d "$dotest" -o -d "$GIT_DIR"/rebase ||
+		test -d "$dotest" -o -d "$GIT_DIR"/rebase-apply ||
 			die "No rebase in progress?"
 
 		git diff-files --quiet --ignore-submodules || {
@@ -173,15 +173,15 @@ do
 			finish_rb_merge
 			exit
 		fi
-		head_name=$(cat "$GIT_DIR"/rebase/head-name) &&
-		onto=$(cat "$GIT_DIR"/rebase/onto) &&
-		orig_head=$(cat "$GIT_DIR"/rebase/orig-head) &&
+		head_name=$(cat "$GIT_DIR"/rebase-apply/head-name) &&
+		onto=$(cat "$GIT_DIR"/rebase-apply/onto) &&
+		orig_head=$(cat "$GIT_DIR"/rebase-apply/orig-head) &&
 		git am --resolved --3way --resolvemsg="$RESOLVEMSG" &&
 		move_to_original_branch
 		exit
 		;;
 	--skip)
-		test -d "$dotest" -o -d "$GIT_DIR"/rebase ||
+		test -d "$dotest" -o -d "$GIT_DIR"/rebase-apply ||
 			die "No rebase in progress?"
 
 		git reset --hard HEAD || exit $?
@@ -201,23 +201,23 @@ do
 			finish_rb_merge
 			exit
 		fi
-		head_name=$(cat "$GIT_DIR"/rebase/head-name) &&
-		onto=$(cat "$GIT_DIR"/rebase/onto) &&
-		orig_head=$(cat "$GIT_DIR"/rebase/orig-head) &&
+		head_name=$(cat "$GIT_DIR"/rebase-apply/head-name) &&
+		onto=$(cat "$GIT_DIR"/rebase-apply/onto) &&
+		orig_head=$(cat "$GIT_DIR"/rebase-apply/orig-head) &&
 		git am -3 --skip --resolvemsg="$RESOLVEMSG" &&
 		move_to_original_branch
 		exit
 		;;
 	--abort)
-		test -d "$dotest" -o -d "$GIT_DIR"/rebase ||
+		test -d "$dotest" -o -d "$GIT_DIR"/rebase-apply ||
 			die "No rebase in progress?"
 
 		git rerere clear
 		if test -d "$dotest"
 		then
 			move_to_original_branch
 		else
-			dotest="$GIT_DIR"/rebase
+			dotest="$GIT_DIR"/rebase-apply
 			move_to_original_branch
 		fi
 		git reset --hard $(cat "$dotest/orig-head")
@@ -265,18 +265,20 @@ do
 	shift
 done
 
-# Make sure we do not have $GIT_DIR/rebase
+# Make sure we do not have $GIT_DIR/rebase-apply
 if test -z "$do_merge"
 then
-	if mkdir "$GIT_DIR"/rebase
+	if mkdir "$GIT_DIR"/rebase-apply
 	then
-		rmdir "$GIT_DIR"/rebase
+		rmdir "$GIT_DIR"/rebase-apply
 	else
 		echo >&2 '
-It seems that I cannot create a '"$GIT_DIR"'/rebase directory, and I wonder if you
-are in the middle of patch application or another rebase.  If that is not
-the case, please rm -fr '"$GIT_DIR"'/rebase and run me again.  I am stopping in case
-you still have something valuable there.'
+It seems that I cannot create a '"$GIT_DIR"'/rebase-apply directory,
+and I wonder if you are in the middle of patch application or another
+rebase.  If that is not the case, please
+	rm -fr '"$GIT_DIR"'/rebase-apply
+ and run me again.  I am stopping in case you still have something
+valuable there.'
 		exit 1
 	fi
 else
@@ -395,10 +397,10 @@ then
 	git am $git_am_opt --rebasing --resolvemsg="$RESOLVEMSG" &&
 	move_to_original_branch
 	ret=$?
-	test 0 != $ret -a -d "$GIT_DIR"/rebase &&
-		echo $head_name > "$GIT_DIR"/rebase/head-name &&
-		echo $onto > "$GIT_DIR"/rebase/onto &&
-		echo $orig_head > "$GIT_DIR"/rebase/orig-head
+	test 0 != $ret -a -d "$GIT_DIR"/rebase-apply &&
+		echo $head_name > "$GIT_DIR"/rebase-apply/head-name &&
+		echo $onto > "$GIT_DIR"/rebase-apply/onto &&
+		echo $orig_head > "$GIT_DIR"/rebase-apply/orig-head
 	exit $ret
 fi
 

t/t3401-rebase-partial.sh

@@ -50,7 +50,7 @@ test_debug \
 
 test_expect_success \
     'rebase topic branch against new master and check git-am did not get halted' \
-    'git-rebase master && test ! -d .git/rebase'
+    'git-rebase master && test ! -d .git/rebase-apply'
 
 test_expect_success \
 	'rebase --merge topic branch that was partially merged upstream' \

t/t3407-rebase-abort.sh

@@ -74,7 +74,7 @@ testrebase() {
 	'
 }
 
-testrebase "" .git/rebase
+testrebase "" .git/rebase-apply
 testrebase " --merge" .git/rebase-merge
 
 test_done

t/t4150-am.sh

@@ -102,7 +102,7 @@ test_expect_success 'am applies patch correctly' '
 	git checkout first &&
 	test_tick &&
 	git am <patch1 &&
-	! test -d .git/rebase &&
+	! test -d .git/rebase-apply &&
 	test -z "$(git diff second)" &&
 	test "$(git rev-parse second)" = "$(git rev-parse HEAD)" &&
 	test "$(git rev-parse second^)" = "$(git rev-parse HEAD^)"
@@ -123,7 +123,7 @@ test_expect_success 'am changes committer and keeps author' '
 	test_tick &&
 	git checkout first &&
 	git am patch2 &&
-	! test -d .git/rebase &&
+	! test -d .git/rebase-apply &&
 	test "$(git rev-parse master^^)" = "$(git rev-parse HEAD^^)" &&
 	test -z "$(git diff master..HEAD)" &&
 	test -z "$(git diff master^..HEAD^)" &&
@@ -163,7 +163,7 @@ test_expect_success 'am without --keep removes Re: and [PATCH] stuff' '
 test_expect_success 'am --keep really keeps the subject' '
 	git checkout HEAD^ &&
 	git am --keep patch4 &&
-	! test -d .git/rebase &&
+	! test -d .git/rebase-apply &&
 	git-cat-file commit HEAD |
 		grep -q -F "Re: Re: Re: [PATCH 1/5 v2] third"
 '
@@ -176,51 +176,51 @@ test_expect_success 'am -3 falls back to 3-way merge' '
 	test_tick &&
 	git commit -m "copied stuff" &&
 	git am -3 lorem-move.patch &&
-	! test -d .git/rebase &&
+	! test -d .git/rebase-apply &&
 	test -z "$(git diff lorem)"
 '
 
 test_expect_success 'am pauses on conflict' '
 	git checkout lorem2^^ &&
 	test_must_fail git am lorem-move.patch &&
-	test -d .git/rebase
+	test -d .git/rebase-apply
 '
 
 test_expect_success 'am --skip works' '
 	git am --skip &&
-	! test -d .git/rebase &&
+	! test -d .git/rebase-apply &&
 	test -z "$(git diff lorem2^^ -- file)" &&
 	test goodbye = "$(cat another)"
 '
 
 test_expect_success 'am --resolved works' '
 	git checkout lorem2^^ &&
 	test_must_fail git am lorem-move.patch &&
-	test -d .git/rebase &&
+	test -d .git/rebase-apply &&
 	echo resolved >>file &&
 	git add file &&
 	git am --resolved &&
-	! test -d .git/rebase &&
+	! test -d .git/rebase-apply &&
 	test goodbye = "$(cat another)"
 '
 
 test_expect_success 'am takes patches from a Pine mailbox' '
 	git checkout first &&
 	cat pine patch1 | git am &&
-	! test -d .git/rebase &&
+	! test -d .git/rebase-apply &&
 	test -z "$(git diff master^..HEAD)"
 '
 
 test_expect_success 'am fails on mail without patch' '
 	test_must_fail git am <failmail &&
-	rm -r .git/rebase/
+	rm -r .git/rebase-apply/
 '
 
 test_expect_success 'am fails on empty patch' '
 	echo "---" >>failmail &&
 	test_must_fail git am <failmail &&
 	git am --skip &&
-	! test -d .git/rebase
+	! test -d .git/rebase-apply
 '
 
 test_expect_success 'am works from stdin in subdirectory' '

t/t9106-git-svn-commit-diff-clobber.sh

@@ -87,7 +87,9 @@ test_expect_success 'multiple dcommit from git-svn will not clobber svn' "
 	"
 
 
-test_expect_success 'check that rebase really failed' 'test -d .git/rebase'
+test_expect_success 'check that rebase really failed' '
+	test -d .git/rebase-apply
+'
 
 test_expect_success 'resolve, continue the rebase and dcommit' "
 	echo clobber and I really mean it > file &&