Merge branch 'mz/rebase'

* mz/rebase: (34 commits)
  rebase: define options in OPTIONS_SPEC
  Makefile: do not install sourced rebase scripts
  rebase: use @{upstream} if no upstream specified
  rebase -i: remove unnecessary state rebase-root
  rebase -i: don't read unused variable preserve_merges
  git-rebase--am: remove unnecessary --3way option
  rebase -m: don't print exit code 2 when merge fails
  rebase -m: remember allow_rerere_autoupdate option
  rebase: remember strategy and strategy options
  rebase: remember verbose option
  rebase: extract code for writing basic state
  rebase: factor out sub command handling
  rebase: make -v a tiny bit more verbose
  rebase -i: align variable names
  rebase: show consistent conflict resolution hint
  rebase: extract am code to new source file
  rebase: extract merge code to new source file
  rebase: remove $branch as synonym for $orig_head
  rebase -i: support --stat
  rebase: factor out call to pre-rebase hook
  ...

.gitignore

@@ -101,7 +101,9 @@
 /git-quiltimport
 /git-read-tree
 /git-rebase
+/git-rebase--am
 /git-rebase--interactive
+/git-rebase--merge
 /git-receive-pack
 /git-reflog
 /git-relink

Documentation/config.txt

@@ -641,7 +641,7 @@ branch.<name>.remote::
 
 branch.<name>.merge::
 	Defines, together with branch.<name>.remote, the upstream branch
-	for the given branch. It tells 'git fetch'/'git pull' which
+	for the given branch. It tells 'git fetch'/'git pull'/'git rebase' which
 	branch to merge and can also affect 'git push' (see push.default).
 	When in branch <name>, it tells 'git fetch' the default
 	refspec to be marked for merging in FETCH_HEAD. The value is

Documentation/git-rebase.txt

@@ -9,7 +9,7 @@ SYNOPSIS
 --------
 [verse]
 'git rebase' [-i | --interactive] [options] [--onto <newbase>]
-	<upstream> [<branch>]
+	[<upstream>] [<branch>]
 'git rebase' [-i | --interactive] [options] --onto <newbase>
 	--root [<branch>]
 
@@ -21,6 +21,12 @@ If <branch> is specified, 'git rebase' will perform an automatic
 `git checkout <branch>` before doing anything else.  Otherwise
 it remains on the current branch.
 
+If <upstream> is not specified, the upstream configured in
+branch.<name>.remote and branch.<name>.merge options will be used; see
+linkgit:git-config[1] for details.  If you are currently not on any
+branch or if the current branch does not have a configured upstream,
+the rebase will abort.
+
 All changes made by commits in the current branch but that are not
 in <upstream> are saved to a temporary area.  This is the same set
 of commits that would be shown by `git log <upstream>..HEAD` (or
@@ -217,7 +223,8 @@ leave out at most one of A and B, in which case it defaults to HEAD.
 
 <upstream>::
 	Upstream branch to compare against.  May be any valid commit,
-	not just an existing branch name.
+	not just an existing branch name. Defaults to the configured
+	upstream for the current branch.
 
 <branch>::
 	Working branch; defaults to HEAD.

Makefile

@@ -368,7 +368,6 @@ SCRIPT_SH += git-merge-resolve.sh
 SCRIPT_SH += git-mergetool.sh
 SCRIPT_SH += git-pull.sh
 SCRIPT_SH += git-quiltimport.sh
-SCRIPT_SH += git-rebase--interactive.sh
 SCRIPT_SH += git-rebase.sh
 SCRIPT_SH += git-repack.sh
 SCRIPT_SH += git-request-pull.sh
@@ -378,6 +377,9 @@ SCRIPT_SH += git-web--browse.sh
 
 SCRIPT_LIB += git-mergetool--lib
 SCRIPT_LIB += git-parse-remote
+SCRIPT_LIB += git-rebase--am
+SCRIPT_LIB += git-rebase--interactive
+SCRIPT_LIB += git-rebase--merge
 SCRIPT_LIB += git-sh-setup
 
 SCRIPT_PERL += git-add--interactive.perl

git-parse-remote.sh

@@ -50,3 +50,41 @@ get_remote_merge_branch () {
 	    esac
 	esac
 }
+
+error_on_missing_default_upstream () {
+	cmd="$1"
+	op_type="$2"
+	op_prep="$3"
+	example="$4"
+	branch_name=$(git symbolic-ref -q HEAD)
+	if test -z "$branch_name"
+	then
+		echo "You are not currently on a branch, so I cannot use any
+'branch.<branchname>.merge' in your configuration file.
+Please specify which branch you want to $op_type $op_prep on the command
+line and try again (e.g. '$example').
+See git-${cmd}(1) for details."
+	else
+		echo "You asked me to $cmd without telling me which branch you
+want to $op_type $op_prep, and 'branch.${branch_name#refs/heads/}.merge' in
+your configuration file does not tell me, either. Please
+specify which branch you want to use on the command line and
+try again (e.g. '$example').
+See git-${cmd}(1) for details.
+
+If you often $op_type $op_prep the same branch, you may want to
+use something like the following in your configuration file:
+    [branch \"${branch_name#refs/heads/}\"]
+    remote = <nickname>
+    merge = <remote-ref>"
+		test rebase = "$op_type" &&
+		echo "    rebase = true"
+		echo "
+    [remote \"<nickname>\"]
+    url = <url>
+    fetch = <refspec>
+
+See git-config(1) for details."
+	fi
+	exit 1
+}

git-pull.sh

@@ -168,34 +168,10 @@ error_on_no_merge_candidates () {
 		echo "You asked to pull from the remote '$1', but did not specify"
 		echo "a branch. Because this is not the default configured remote"
 		echo "for your current branch, you must specify a branch on the command line."
-	elif [ -z "$curr_branch" ]; then
-		echo "You are not currently on a branch, so I cannot use any"
-		echo "'branch.<branchname>.merge' in your configuration file."
-		echo "Please specify which remote branch you want to use on the command"
-		echo "line and try again (e.g. 'git pull <repository> <refspec>')."
-		echo "See git-pull(1) for details."
-	elif [ -z "$upstream" ]; then
-		echo "You asked me to pull without telling me which branch you"
-		echo "want to $op_type $op_prep, and 'branch.${curr_branch}.merge' in"
-		echo "your configuration file does not tell me, either. Please"
-		echo "specify which branch you want to use on the command line and"
-		echo "try again (e.g. 'git pull <repository> <refspec>')."
-		echo "See git-pull(1) for details."
-		echo
-		echo "If you often $op_type $op_prep the same branch, you may want to"
-		echo "use something like the following in your configuration file:"
-		echo
-		echo "    [branch \"${curr_branch}\"]"
-		echo "    remote = <nickname>"
-		echo "    merge = <remote-ref>"
-		test rebase = "$op_type" &&
-			echo "    rebase = true"
-		echo
-		echo "    [remote \"<nickname>\"]"
-		echo "    url = <url>"
-		echo "    fetch = <refspec>"
-		echo
-		echo "See git-config(1) for details."
+	elif [ -z "$curr_branch" -o -z "$upstream" ]; then
+		. git-parse-remote
+		error_on_missing_default_upstream "pull" $op_type $op_prep \
+			"git pull <repository> <refspec>"
 	else
 		echo "Your configuration specifies to $op_type $op_prep the ref '${upstream#refs/heads/}'"
 		echo "from the remote, but no such ref was fetched."

git-rebase--am.sh

@@ -0,0 +1,30 @@
+#!/bin/sh
+#
+# Copyright (c) 2010 Junio C Hamano.
+#
+
+. git-sh-setup
+
+case "$action" in
+continue)
+	git am --resolved --resolvemsg="$resolvemsg" &&
+	move_to_original_branch
+	exit
+	;;
+skip)
+	git am --skip --resolvemsg="$resolvemsg" &&
+	move_to_original_branch
+	exit
+	;;
+esac
+
+test -n "$rebase_root" && root_flag=--root
+
+git format-patch -k --stdout --full-index --ignore-if-in-upstream \
+	--src-prefix=a/ --dst-prefix=b/ \
+	--no-renames $root_flag "$revisions" |
+git am $git_am_opt --rebasing --resolvemsg="$resolvemsg" &&
+move_to_original_branch
+ret=$?
+test 0 != $ret -a -d "$state_dir" && write_basic_state
+exit $ret