---

yaml
---
r: 97437
b: refs/heads/master
c: 62d104d
h: refs/heads/master
i:
  97435: f786bf9
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: ebb3770c01a8afd049e3e91b0a026dcdfcb2da9f
+refs/heads/master: 62d104d0deeabd4148e49eba729d963e740e205f

trunk/drivers/usb/misc/Kconfig

@@ -269,3 +269,14 @@ config USB_TEST
 	  See <http://www.linux-usb.org/usbtest/> for more information,
 	  including sample test device firmware and "how to use it".
 
+config USB_ISIGHTFW
+	tristate "iSight firmware loading support"
+	depends on USB
+	help
+	  This driver loads firmware for USB Apple iSight cameras, allowing
+	  them to be driven by the USB video class driver available at
+	  http://linux-uvc.berlios.de
+
+	  The firmware for this driver must be extracted from the MacOS
+	  driver beforehand. Tools for doing so are available at
+	  http://bersace03.free.fr

trunk/drivers/usb/misc/Makefile

@@ -14,6 +14,7 @@ obj-$(CONFIG_USB_EMI62)		+= emi62.o
 obj-$(CONFIG_USB_FTDI_ELAN)	+= ftdi-elan.o
 obj-$(CONFIG_USB_IDMOUSE)	+= idmouse.o
 obj-$(CONFIG_USB_IOWARRIOR)	+= iowarrior.o
+obj-$(CONFIG_USB_ISIGHTFW)	+= isight_firmware.o
 obj-$(CONFIG_USB_LCD)		+= usblcd.o
 obj-$(CONFIG_USB_LD)		+= ldusb.o
 obj-$(CONFIG_USB_LED)		+= usbled.o

trunk/drivers/usb/misc/isight_firmware.c

@@ -0,0 +1,131 @@
+/*
+ * Driver for loading USB isight firmware
+ *
+ * Copyright (C) 2008 Matthew Garrett <mjg@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation, version 2.
+ *
+ * The USB isight cameras in recent Apples are roughly compatible with the USB
+ * video class specification, and can be driven by uvcvideo. However, they
+ * need firmware to be loaded beforehand. After firmware loading, the device
+ * detaches from the USB bus and reattaches with a new device ID. It can then
+ * be claimed by the uvc driver.
+ *
+ * The firmware is non-free and must be extracted by the user. Tools to do this
+ * are available at http://bersace03.free.fr/ift/
+ *
+ * The isight firmware loading was reverse engineered by Johannes Berg
+ * <johannes@sipsolutions.de>, and this driver is based on code by Ronald
+ * Bultje <rbultje@ronald.bitfreak.net>
+ */
+
+#include <linux/usb.h>
+#include <linux/firmware.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+
+static struct usb_device_id id_table[] = {
+	{USB_DEVICE(0x05ac, 0x8300)},
+	{},
+};
+
+MODULE_DEVICE_TABLE(usb, id_table);
+
+static int isight_firmware_load(struct usb_interface *intf,
+				const struct usb_device_id *id)
+{
+	struct usb_device *dev = interface_to_usbdev(intf);
+	int llen, len, req, ret = 0;
+	const struct firmware *firmware;
+	unsigned char *buf;
+	unsigned char data[4];
+	char *ptr;
+
+	if (request_firmware(&firmware, "isight.fw", &dev->dev) != 0) {
+		printk(KERN_ERR "Unable to load isight firmware\n");
+		return -ENODEV;
+	}
+
+	ptr = firmware->data;
+
+	if (usb_control_msg
+	    (dev, usb_sndctrlpipe(dev, 0), 0xa0, 0x40, 0xe600, 0, "\1", 1,
+	     300) != 1) {
+		printk(KERN_ERR
+		       "Failed to initialise isight firmware loader\n");
+		ret = -ENODEV;
+		goto out;
+	}
+
+	while (1) {
+		memcpy(data, ptr, 4);
+		len = (data[0] << 8 | data[1]);
+		req = (data[2] << 8 | data[3]);
+		ptr += 4;
+
+		if (len == 0x8001)
+			break;	/* success */
+		else if (len == 0)
+			continue;
+
+		for (; len > 0; req += 50) {
+			llen = len > 50 ? 50 : len;
+			len -= llen;
+
+			buf = kmalloc(llen, GFP_KERNEL);
+			memcpy(buf, ptr, llen);
+
+			ptr += llen;
+
+			if (usb_control_msg
+			    (dev, usb_sndctrlpipe(dev, 0), 0xa0, 0x40, req, 0,
+			     buf, llen, 300) != llen) {
+				printk(KERN_ERR
+				       "Failed to load isight firmware\n");
+				kfree(buf);
+				ret = -ENODEV;
+				goto out;
+			}
+
+			kfree(buf);
+		}
+	}
+	if (usb_control_msg
+	    (dev, usb_sndctrlpipe(dev, 0), 0xa0, 0x40, 0xe600, 0, "\0", 1,
+	     300) != 1) {
+		printk(KERN_ERR "isight firmware loading completion failed\n");
+		ret = -ENODEV;
+	}
+out:
+	release_firmware(firmware);
+	return ret;
+}
+
+static void isight_firmware_disconnect(struct usb_interface *intf)
+{
+}
+
+static struct usb_driver isight_firmware_driver = {
+	.name = "isight_firmware",
+	.probe = isight_firmware_load,
+	.disconnect = isight_firmware_disconnect,
+	.id_table = id_table,
+};
+
+static int __init isight_firmware_init(void)
+{
+	return usb_register(&isight_firmware_driver);
+}
+
+static void __exit isight_firmware_exit(void)
+{
+	usb_deregister(&isight_firmware_driver);
+}
+
+module_init(isight_firmware_init);
+module_exit(isight_firmware_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Matthew Garrett <mjg@redhat.com>");