Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel…

…/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: wacom - switch mode upon system resume
  Revert "Input: wacom - merge out and in prox events"
  Input: matrix_keypad - allow platform to disable key autorepeat
  Input: ALPS - add signature for HP Pavilion dm3 laptops
  Input: i8042 - spelling fix
  Input: sparse-keymap - implement safer freeing of the keymap
  Input: update the status of the Multitouch X driver project
  Input: clarify the no-finger event in multitouch protocol
  Input: bcm5974 - retract efi-broken suspend_resume
  Input: sparse-keymap - free the right keymap on error

Documentation/input/multi-touch-protocol.txt

@@ -68,6 +68,22 @@ like:
    SYN_MT_REPORT
    SYN_REPORT
 
+Here is the sequence after lifting one of the fingers:
+
+   ABS_MT_POSITION_X
+   ABS_MT_POSITION_Y
+   SYN_MT_REPORT
+   SYN_REPORT
+
+And here is the sequence after lifting the remaining finger:
+
+   SYN_MT_REPORT
+   SYN_REPORT
+
+If the driver reports one of BTN_TOUCH or ABS_PRESSURE in addition to the
+ABS_MT events, the last SYN_MT_REPORT event may be omitted. Otherwise, the
+last SYN_REPORT will be dropped by the input core, resulting in no
+zero-finger event reaching userland.
 
 Event Semantics
 ---------------
@@ -217,11 +233,6 @@ where examples can be found.
 difference between the contact position and the approaching tool position
 could be used to derive tilt.
 [2] The list can of course be extended.
-[3] The multi-touch X driver is currently in the prototyping stage. At the
-time of writing (April 2009), the MT protocol is not yet merged, and the
-prototype implements finger matching, basic mouse support and two-finger
-scrolling. The project aims at improving the quality of current multi-touch
-functionality available in the Synaptics X driver, and in addition
-implement more advanced gestures.
+[3] Multitouch X driver project: http://bitmath.org/code/multitouch/.
 [4] See the section on event computation.
 [5] See the section on finger tracking.

drivers/input/input.c

@@ -660,7 +660,14 @@ static int input_default_setkeycode(struct input_dev *dev,
 int input_get_keycode(struct input_dev *dev,
 		      unsigned int scancode, unsigned int *keycode)
 {
-	return dev->getkeycode(dev, scancode, keycode);
+	unsigned long flags;
+	int retval;
+
+	spin_lock_irqsave(&dev->event_lock, flags);
+	retval = dev->getkeycode(dev, scancode, keycode);
+	spin_unlock_irqrestore(&dev->event_lock, flags);
+
+	return retval;
 }
 EXPORT_SYMBOL(input_get_keycode);
 

drivers/input/keyboard/matrix_keypad.c

@@ -374,7 +374,9 @@ static int __devinit matrix_keypad_probe(struct platform_device *pdev)
 	input_dev->name		= pdev->name;
 	input_dev->id.bustype	= BUS_HOST;
 	input_dev->dev.parent	= &pdev->dev;
-	input_dev->evbit[0]	= BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
+	input_dev->evbit[0]	= BIT_MASK(EV_KEY);
+	if (!pdata->no_autorepeat)
+		input_dev->evbit[0] |= BIT_MASK(EV_REP);
 	input_dev->open		= matrix_keypad_start;
 	input_dev->close	= matrix_keypad_stop;
 

drivers/input/mouse/alps.c

@@ -64,6 +64,7 @@ static const struct alps_model_info alps_model_data[] = {
 	{ { 0x62, 0x02, 0x14 }, 0xcf, 0xcf,
 		ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED },
 	{ { 0x73, 0x02, 0x50 }, 0xcf, 0xcf, ALPS_FOUR_BUTTONS },	  /* Dell Vostro 1400 */
+	{ { 0x73, 0x02, 0x64 }, 0xf8, 0xf8, 0 },			  /* HP Pavilion dm3 */
 	{ { 0x52, 0x01, 0x14 }, 0xff, 0xff,
 		ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED },	  /* Toshiba Tecra A11-11L */
 };

drivers/input/mouse/bcm5974.c

@@ -803,7 +803,6 @@ static struct usb_driver bcm5974_driver = {
 	.disconnect		= bcm5974_disconnect,
 	.suspend		= bcm5974_suspend,
 	.resume			= bcm5974_resume,
-	.reset_resume		= bcm5974_resume,
 	.id_table		= bcm5974_table,
 	.supports_autosuspend	= 1,
 };

drivers/input/serio/i8042.c

@@ -39,7 +39,7 @@ MODULE_PARM_DESC(noaux, "Do not probe or use AUX (mouse) port.");
 
 static bool i8042_nomux;
 module_param_named(nomux, i8042_nomux, bool, 0);
-MODULE_PARM_DESC(nomux, "Do not check whether an active multiplexing conrtoller is present.");
+MODULE_PARM_DESC(nomux, "Do not check whether an active multiplexing controller is present.");
 
 static bool i8042_unlock;
 module_param_named(unlock, i8042_unlock, bool, 0);

drivers/input/sparse-keymap.c

@@ -68,12 +68,14 @@ static int sparse_keymap_getkeycode(struct input_dev *dev,
 				    unsigned int scancode,
 				    unsigned int *keycode)
 {
-	const struct key_entry *key =
-			sparse_keymap_entry_from_scancode(dev, scancode);
+	const struct key_entry *key;
 
-	if (key && key->type == KE_KEY) {
-		*keycode = key->keycode;
-		return 0;
+	if (dev->keycode) {
+		key = sparse_keymap_entry_from_scancode(dev, scancode);
+		if (key && key->type == KE_KEY) {
+			*keycode = key->keycode;
+			return 0;
+		}
 	}
 
 	return -EINVAL;
@@ -86,17 +88,16 @@ static int sparse_keymap_setkeycode(struct input_dev *dev,
 	struct key_entry *key;
 	int old_keycode;
 
-	if (keycode < 0 || keycode > KEY_MAX)
-		return -EINVAL;
-
-	key = sparse_keymap_entry_from_scancode(dev, scancode);
-	if (key && key->type == KE_KEY) {
-		old_keycode = key->keycode;
-		key->keycode = keycode;
-		set_bit(keycode, dev->keybit);
-		if (!sparse_keymap_entry_from_keycode(dev, old_keycode))
-			clear_bit(old_keycode, dev->keybit);
-		return 0;
+	if (dev->keycode) {
+		key = sparse_keymap_entry_from_scancode(dev, scancode);
+		if (key && key->type == KE_KEY) {
+			old_keycode = key->keycode;
+			key->keycode = keycode;
+			set_bit(keycode, dev->keybit);
+			if (!sparse_keymap_entry_from_keycode(dev, old_keycode))
+				clear_bit(old_keycode, dev->keybit);
+			return 0;
+		}
 	}
 
 	return -EINVAL;
@@ -164,7 +165,7 @@ int sparse_keymap_setup(struct input_dev *dev,
 	return 0;
 
  err_out:
-	kfree(keymap);
+	kfree(map);
 	return error;
 
 }
@@ -176,14 +177,27 @@ EXPORT_SYMBOL(sparse_keymap_setup);
  *
  * This function is used to free memory allocated by sparse keymap
  * in an input device that was set up by sparse_keymap_setup().
+ * NOTE: It is safe to cal this function while input device is
+ * still registered (however the drivers should care not to try to
+ * use freed keymap and thus have to shut off interrups/polling
+ * before freeing the keymap).
  */
 void sparse_keymap_free(struct input_dev *dev)
 {
+	unsigned long flags;
+
+	/*
+	 * Take event lock to prevent racing with input_get_keycode()
+	 * and input_set_keycode() if we are called while input device
+	 * is still registered.
+	 */
+	spin_lock_irqsave(&dev->event_lock, flags);
+
 	kfree(dev->keycode);
 	dev->keycode = NULL;
 	dev->keycodemax = 0;
-	dev->getkeycode = NULL;
-	dev->setkeycode = NULL;
+
+	spin_unlock_irqrestore(&dev->event_lock, flags);
 }
 EXPORT_SYMBOL(sparse_keymap_free);
 

drivers/input/tablet/wacom_sys.c

@@ -673,13 +673,15 @@ static int wacom_resume(struct usb_interface *intf)
 	int rv;
 
 	mutex_lock(&wacom->lock);
-	if (wacom->open) {
+
+	/* switch to wacom mode first */
+	wacom_query_tablet_data(intf, features);
+
+	if (wacom->open)
 		rv = usb_submit_urb(wacom->irq, GFP_NOIO);
-		/* switch to wacom mode if needed */
-		if (!wacom_retrieve_hid_descriptor(intf, features))
-			wacom_query_tablet_data(intf, features);
-	} else
+	else
 		rv = 0;
+
 	mutex_unlock(&wacom->lock);
 
 	return rv;