---

yaml
---
r: 342389
b: refs/heads/master
c: f75ed2d
h: refs/heads/master
i:
  342387: 7cbff1d
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: c3b9d1db23c4ebd4d8a0964ebcf5f27d4eb8fa3f
+refs/heads/master: f75ed2d39562e19e4d1896c07e7f091515c6d11d

trunk/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt

@@ -0,0 +1,19 @@
+* EETI eGalax Multiple Touch Controller
+
+Required properties:
+- compatible: must be "eeti,egalax_ts"
+- reg: i2c slave address
+- interrupt-parent: the phandle for the interrupt controller
+- interrupts: touch controller interrupt
+- wakeup-gpios: the gpio pin to be used for waking up the controller
+  as well as uased as irq pin
+
+Example:
+
+	egalax_ts@04 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 2>;
+		wakeup-gpios = <&gpio1 9 0>;
+	};

trunk/Documentation/hwmon/fam15h_power

@@ -10,7 +10,7 @@ Supported chips:
   BIOS and Kernel Developer's Guide (BKDG) For AMD Family 15h Processors
     (not yet published)
 
-Author: Andreas Herrmann <andreas.herrmann3@amd.com>
+Author: Andreas Herrmann <herrmann.der.user@googlemail.com>
 
 Description
 -----------

trunk/MAINTAINERS

@@ -503,7 +503,7 @@ F:	include/linux/altera_uart.h
 F:	include/linux/altera_jtaguart.h
 
 AMD FAM15H PROCESSOR POWER MONITORING DRIVER
-M:	Andreas Herrmann <andreas.herrmann3@amd.com>
+M:	Andreas Herrmann <herrmann.der.user@googlemail.com>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/fam15h_power
@@ -2507,6 +2507,7 @@ M:	Joonyoung Shim <jy0922.shim@samsung.com>
 M:	Seung-Woo Kim <sw0312.kim@samsung.com>
 M:	Kyungmin Park <kyungmin.park@samsung.com>
 L:	dri-devel@lists.freedesktop.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos.git
 S:	Supported
 F:	drivers/gpu/drm/exynos
 F:	include/drm/exynos*
@@ -5647,7 +5648,7 @@ S:	Maintained
 F:	drivers/pinctrl/spear/
 
 PKTCDVD DRIVER
-M:	Peter Osterlund <petero2@telia.com>
+M:	Jiri Kosina <jkosina@suse.cz>
 S:	Maintained
 F:	drivers/block/pktcdvd.c
 F:	include/linux/pktcdvd.h

trunk/Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 7
 SUBLEVEL = 0
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc4
 NAME = Terrified Chipmunk
 
 # *DOCUMENTATION*

trunk/arch/arm/Kconfig

@@ -943,7 +943,7 @@ config ARCH_OMAP
 	help
 	  Support for TI's OMAP platform (OMAP1/2/3/4).
 
-config ARCH_VT8500
+config ARCH_VT8500_SINGLE
 	bool "VIA/WonderMedia 85xx"
 	select ARCH_HAS_CPUFREQ
 	select ARCH_REQUIRE_GPIOLIB
@@ -953,6 +953,8 @@ config ARCH_VT8500
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_GPIO
 	select HAVE_CLK
+	select MULTI_IRQ_HANDLER
+	select SPARSE_IRQ
 	select USE_OF
 	help
 	  Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip.
@@ -1127,6 +1129,8 @@ source "arch/arm/mach-versatile/Kconfig"
 source "arch/arm/mach-vexpress/Kconfig"
 source "arch/arm/plat-versatile/Kconfig"
 
+source "arch/arm/mach-vt8500/Kconfig"
+
 source "arch/arm/mach-w90x900/Kconfig"
 
 # Definitions to make life easier

trunk/arch/arm/include/asm/mach/map.h

@@ -40,6 +40,13 @@ extern void iotable_init(struct map_desc *, int);
 extern void vm_reserve_area_early(unsigned long addr, unsigned long size,
 				  void *caller);
 
+#ifdef CONFIG_DEBUG_LL
+extern void debug_ll_addr(unsigned long *paddr, unsigned long *vaddr);
+extern void debug_ll_io_init(void);
+#else
+static inline void debug_ll_io_init(void) {}
+#endif
+
 struct mem_type;
 extern const struct mem_type *get_mem_type(unsigned int type);
 /*

trunk/arch/arm/kernel/debug.S

@@ -100,6 +100,13 @@ ENTRY(printch)
 		b	1b
 ENDPROC(printch)
 
+ENTRY(debug_ll_addr)
+		addruart r2, r3, ip
+		str	r2, [r0]
+		str	r3, [r1]
+		mov	pc, lr
+ENDPROC(debug_ll_addr)
+
 #else
 
 ENTRY(printascii)
@@ -119,4 +126,11 @@ ENTRY(printch)
 		mov	pc, lr
 ENDPROC(printch)
 
+ENTRY(debug_ll_addr)
+		mov	r2, #0
+		str	r2, [r0]
+		str	r2, [r1]
+		mov	pc, lr
+ENDPROC(debug_ll_addr)
+
 #endif

trunk/arch/arm/mach-vt8500/Kconfig

@@ -0,0 +1,12 @@
+config ARCH_VT8500
+	bool "VIA/WonderMedia 85xx" if ARCH_MULTI_V5
+	default ARCH_VT8500_SINGLE
+	select ARCH_HAS_CPUFREQ
+	select ARCH_REQUIRE_GPIOLIB
+	select CLKDEV_LOOKUP
+	select CPU_ARM926T
+	select GENERIC_CLOCKEVENTS
+	select GENERIC_GPIO
+	select HAVE_CLK
+	help
+	  Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip.

trunk/arch/arm/mach-vt8500/common.h

@@ -25,4 +25,7 @@ int __init vt8500_irq_init(struct device_node *node,
 /* defined in drivers/clk/clk-vt8500.c */
 void __init vtwm_clk_init(void __iomem *pmc_base);
 
+/* defined in irq.c */
+asmlinkage void vt8500_handle_irq(struct pt_regs *regs);
+
 #endif

trunk/arch/arm/mach-vt8500/irq.c

@@ -36,7 +36,7 @@
 #include <linux/of_address.h>
 
 #include <asm/irq.h>
-
+#include <asm/exception.h>
 
 #define VT8500_ICPC_IRQ		0x20
 #define VT8500_ICPC_FIQ		0x24
@@ -66,39 +66,42 @@
 #define VT8500_EDGE		( VT8500_TRIGGER_RISING \
 				| VT8500_TRIGGER_FALLING)
 
-static int irq_cnt;
+/* vt8500 has 1 intc, wm8505 and wm8650 have 2 */
+#define VT8500_INTC_MAX		2
 
-struct vt8500_irq_priv {
-	void __iomem *base;
+struct vt8500_irq_data {
+	void __iomem 		*base;		/* IO Memory base address */
+	struct irq_domain	*domain;	/* Domain for this controller */
 };
 
+/* Global variable for accessing io-mem addresses */
+static struct vt8500_irq_data intc[VT8500_INTC_MAX];
+static u32 active_cnt = 0;
+
 static void vt8500_irq_mask(struct irq_data *d)
 {
-	struct vt8500_irq_priv *priv =
-			(struct vt8500_irq_priv *)(d->domain->host_data);
+	struct vt8500_irq_data *priv = d->domain->host_data;
 	void __iomem *base = priv->base;
-	u8 edge;
+	void __iomem *stat_reg = base + VT8500_ICIS + (d->hwirq < 32 ? 0 : 4);
+	u8 edge, dctr;
+	u32 status;
 
 	edge = readb(base + VT8500_ICDC + d->hwirq) & VT8500_EDGE;
 	if (edge) {
-		void __iomem *stat_reg = base + VT8500_ICIS
-						+ (d->hwirq < 32 ? 0 : 4);
-		unsigned status = readl(stat_reg);
+		status = readl(stat_reg);
 
 		status |= (1 << (d->hwirq & 0x1f));
 		writel(status, stat_reg);
 	} else {
-		u8 dctr = readb(base + VT8500_ICDC + d->hwirq);
-
+		dctr = readb(base + VT8500_ICDC + d->hwirq);
 		dctr &= ~VT8500_INT_ENABLE;
 		writeb(dctr, base + VT8500_ICDC + d->hwirq);
 	}
 }
 
 static void vt8500_irq_unmask(struct irq_data *d)
 {
-	struct vt8500_irq_priv *priv =
-			(struct vt8500_irq_priv *)(d->domain->host_data);
+	struct vt8500_irq_data *priv = d->domain->host_data;
 	void __iomem *base = priv->base;
 	u8 dctr;
 
@@ -109,8 +112,7 @@ static void vt8500_irq_unmask(struct irq_data *d)
 
 static int vt8500_irq_set_type(struct irq_data *d, unsigned int flow_type)
 {
-	struct vt8500_irq_priv *priv =
-			(struct vt8500_irq_priv *)(d->domain->host_data);
+	struct vt8500_irq_data *priv = d->domain->host_data;
 	void __iomem *base = priv->base;
 	u8 dctr;
 
@@ -148,17 +150,15 @@ static struct irq_chip vt8500_irq_chip = {
 
 static void __init vt8500_init_irq_hw(void __iomem *base)
 {
-	unsigned int i;
+	u32 i;
 
 	/* Enable rotating priority for IRQ */
 	writel(ICPC_ROTATE, base + VT8500_ICPC_IRQ);
 	writel(0x00, base + VT8500_ICPC_FIQ);
 
-	for (i = 0; i < 64; i++) {
-		/* Disable all interrupts and route them to IRQ */
-		writeb(VT8500_INT_DISABLE | ICDC_IRQ,
-						base + VT8500_ICDC + i);
-	}
+	/* Disable all interrupts and route them to IRQ */
+	for (i = 0; i < 64; i++)
+		writeb(VT8500_INT_DISABLE | ICDC_IRQ, base + VT8500_ICDC + i);
 }
 
 static int vt8500_irq_map(struct irq_domain *h, unsigned int virq,
@@ -175,33 +175,67 @@ static struct irq_domain_ops vt8500_irq_domain_ops = {
 	.xlate = irq_domain_xlate_onecell,
 };
 
+asmlinkage void __exception_irq_entry vt8500_handle_irq(struct pt_regs *regs)
+{
+	u32 stat, i;
+	int irqnr, virq;
+	void __iomem *base;
+
+	/* Loop through each active controller */
+	for (i=0; i<active_cnt; i++) {
+		base = intc[i].base;
+		irqnr = readl_relaxed(base) & 0x3F;
+		/*
+		  Highest Priority register default = 63, so check that this
+		  is a real interrupt by checking the status register
+		*/
+		if (irqnr == 63) {
+			stat = readl_relaxed(base + VT8500_ICIS + 4);
+			if (!(stat & BIT(31)))
+				continue;
+		}
+
+		virq = irq_find_mapping(intc[i].domain, irqnr);
+		handle_IRQ(virq, regs);
+	}
+}
+
 int __init vt8500_irq_init(struct device_node *node, struct device_node *parent)
 {
-	struct irq_domain *vt8500_irq_domain;
-	struct vt8500_irq_priv *priv;
 	int irq, i;
 	struct device_node *np = node;
 
-	priv = kzalloc(sizeof(struct vt8500_irq_priv), GFP_KERNEL);
-	priv->base = of_iomap(np, 0);
+	if (active_cnt == VT8500_INTC_MAX) {
+		pr_err("%s: Interrupt controllers > VT8500_INTC_MAX\n",
+								__func__);
+		goto out;
+	}
+
+	intc[active_cnt].base = of_iomap(np, 0);
+	intc[active_cnt].domain = irq_domain_add_linear(node, 64,
+			&vt8500_irq_domain_ops,	&intc[active_cnt]);
 
-	vt8500_irq_domain = irq_domain_add_legacy(node, 64, irq_cnt, 0,
-				&vt8500_irq_domain_ops, priv);
-	if (!vt8500_irq_domain)
-		pr_err("%s: Unable to add wmt irq domain!\n", __func__);
+	if (!intc[active_cnt].base) {
+		pr_err("%s: Unable to map IO memory\n", __func__);
+		goto out;
+	}
+
+	if (!intc[active_cnt].domain) {
+		pr_err("%s: Unable to add irq domain!\n", __func__);
+		goto out;
+	}
 
-	irq_set_default_host(vt8500_irq_domain);
+	vt8500_init_irq_hw(intc[active_cnt].base);
 
-	vt8500_init_irq_hw(priv->base);
+	pr_info("vt8500-irq: Added interrupt controller\n");
 
-	pr_info("Added IRQ Controller @ %x [virq_base = %d]\n",
-						(u32)(priv->base), irq_cnt);
+	active_cnt++;
 
 	/* check if this is a slaved controller */
 	if (of_irq_count(np) != 0) {
 		/* check that we have the correct number of interrupts */
 		if (of_irq_count(np) != 8) {
-			pr_err("%s: Incorrect IRQ map for slave controller\n",
+			pr_err("%s: Incorrect IRQ map for slaved controller\n",
 					__func__);
 			return -EINVAL;
 		}
@@ -213,9 +247,7 @@ int __init vt8500_irq_init(struct device_node *node, struct device_node *parent)
 
 		pr_info("vt8500-irq: Enabled slave->parent interrupts\n");
 	}
-
-	irq_cnt += 64;
-
+out:
 	return 0;
 }