---

yaml
---
r: 151129
b: refs/heads/master
c: 6a454f7
h: refs/heads/master
i:
  151127: 0d44669
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 155af2f95f905c830688dd0ca7c7cac4107334fd
+refs/heads/master: 6a454f71d795368c00d9c329b60cc4d58929e7bc

trunk/Documentation/filesystems/vfat.txt

@@ -132,6 +132,11 @@ rodir	      -- FAT has the ATTR_RO (read-only) attribute. On Windows,
 		 If you want to use ATTR_RO as read-only flag even for
 		 the directory, set this option.
 
+errors=panic|continue|remount-ro
+	      -- specify FAT behavior on critical errors: panic, continue
+		 without doing anything or remount the partition in
+		 read-only mode (default behavior).
+
 <bool>: 0,1,yes,no,true,false
 
 TODO

trunk/Documentation/hwmon/f71882fg

@@ -2,14 +2,18 @@ Kernel driver f71882fg
 ======================
 
 Supported chips:
-  * Fintek F71882FG and F71883FG
-    Prefix: 'f71882fg'
+  * Fintek F71858FG
+    Prefix: 'f71858fg'
     Addresses scanned: none, address read from Super I/O config space
     Datasheet: Available from the Fintek website
   * Fintek F71862FG and F71863FG
     Prefix: 'f71862fg'
     Addresses scanned: none, address read from Super I/O config space
     Datasheet: Available from the Fintek website
+  * Fintek F71882FG and F71883FG
+    Prefix: 'f71882fg'
+    Addresses scanned: none, address read from Super I/O config space
+    Datasheet: Available from the Fintek website
   * Fintek F8000
     Prefix: 'f8000'
     Addresses scanned: none, address read from Super I/O config space
@@ -66,13 +70,13 @@ printed when loading the driver.
 
 Three different fan control modes are supported; the mode number is written
 to the pwm#_enable file. Note that not all modes are supported on all
-chips, and some modes may only be available in RPM / PWM mode on the F8000.
+chips, and some modes may only be available in RPM / PWM mode.
 Writing an unsupported mode will result in an invalid parameter error.
 
 * 1: Manual mode
   You ask for a specific PWM duty cycle / DC voltage or a specific % of
   fan#_full_speed by writing to the pwm# file. This mode is only
-  available on the F8000 if the fan channel is in RPM mode.
+  available on the F71858FG / F8000 if the fan channel is in RPM mode.
 
 * 2: Normal auto mode
   You can define a number of temperature/fan speed trip points, which % the

trunk/Documentation/hwmon/ibmaem

@@ -7,7 +7,7 @@ henceforth as AEM.
 Supported systems:
   * Any recent IBM System X server with AEM support.
     This includes the x3350, x3550, x3650, x3655, x3755, x3850 M2,
-    x3950 M2, and certain HS2x/LS2x/QS2x blades.  The IPMI host interface
+    x3950 M2, and certain HC10/HS2x/LS2x/QS2x blades.  The IPMI host interface
     driver ("ipmi-si") needs to be loaded for this driver to do anything.
     Prefix: 'ibmaem'
     Datasheet: Not available

trunk/Documentation/hwmon/sysfs-interface

@@ -70,6 +70,7 @@ are interpreted as 0! For more on how written strings are interpreted see the
 [0-*]	denotes any positive number starting from 0
 [1-*]	denotes any positive number starting from 1
 RO	read only value
+WO	write only value
 RW	read/write value
 
 Read/write values may be read-only for some chips, depending on the
@@ -295,6 +296,24 @@ temp[1-*]_label	Suggested temperature channel label.
 		user-space.
 		RO
 
+temp[1-*]_lowest
+		Historical minimum temperature
+		Unit: millidegree Celsius
+		RO
+
+temp[1-*]_highest
+		Historical maximum temperature
+		Unit: millidegree Celsius
+		RO
+
+temp[1-*]_reset_history
+		Reset temp_lowest and temp_highest
+		WO
+
+temp_reset_history
+		Reset temp_lowest and temp_highest for all sensors
+		WO
+
 Some chips measure temperature using external thermistors and an ADC, and
 report the temperature measurement as a voltage. Converting this voltage
 back to a temperature (or the other way around for limits) requires

trunk/Documentation/hwmon/tmp401

@@ -0,0 +1,42 @@
+Kernel driver tmp401
+====================
+
+Supported chips:
+  * Texas Instruments TMP401
+    Prefix: 'tmp401'
+    Addresses scanned: I2C 0x4c
+    Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp401.html
+  * Texas Instruments TMP411
+    Prefix: 'tmp411'
+    Addresses scanned: I2C 0x4c
+    Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp411.html
+
+Authors:
+         Hans de Goede <hdegoede@redhat.com>
+	 Andre Prendel <andre.prendel@gmx.de>
+
+Description
+-----------
+
+This driver implements support for Texas Instruments TMP401 and
+TMP411 chips. These chips implements one remote and one local
+temperature sensor. Temperature is measured in degrees
+Celsius. Resolution of the remote sensor is 0.0625 degree. Local
+sensor resolution can be set to 0.5, 0.25, 0.125 or 0.0625 degree (not
+supported by the driver so far, so using the default resolution of 0.5
+degree).
+
+The driver provides the common sysfs-interface for temperatures (see
+/Documentation/hwmon/sysfs-interface under Temperatures).
+
+The TMP411 chip is compatible with TMP401. It provides some additional
+features.
+
+* Minimum and Maximum temperature measured since power-on, chip-reset
+
+  Exported via sysfs attributes tempX_lowest and tempX_highest.
+
+* Reset of historical minimum/maximum temperature measurements
+
+  Exported via sysfs attribute temp_reset_history. Writing 1 to this
+  file triggers a reset.

trunk/Documentation/hwmon/w83627ehf

@@ -12,6 +12,10 @@ Supported chips:
     Addresses scanned: ISA address retrieved from Super I/O registers
     Datasheet:
         http://www.nuvoton.com.tw/NR/rdonlyres/7885623D-A487-4CF9-A47F-30C5F73D6FE6/0/W83627DHG.pdf
+  * Winbond W83627DHG-P
+    Prefix: 'w83627dhg'
+    Addresses scanned: ISA address retrieved from Super I/O registers
+    Datasheet: not available
   * Winbond W83667HG
     Prefix: 'w83667hg'
     Addresses scanned: ISA address retrieved from Super I/O registers
@@ -28,8 +32,8 @@ Description
 -----------
 
 This driver implements support for the Winbond W83627EHF, W83627EHG,
-W83627DHG and W83667HG super I/O chips. We will refer to them collectively
-as Winbond chips.
+W83627DHG, W83627DHG-P and W83667HG super I/O chips. We will refer to them
+collectively as Winbond chips.
 
 The chips implement three temperature sensors, five fan rotation
 speed sensors, ten analog voltage sensors (only nine for the 627DHG), one
@@ -135,3 +139,6 @@ done in the driver for all register addresses.
 The DHG also supports PECI, where the DHG queries Intel CPU temperatures, and
 the ICH8 southbridge gets that data via PECI from the DHG, so that the
 southbridge drives the fans. And the DHG supports SST, a one-wire serial bus.
+
+The DHG-P has an additional automatic fan speed control mode named Smart Fan
+(TM) III+. This mode is not yet supported by the driver.

trunk/Documentation/i2c/busses/i2c-viapro

@@ -19,6 +19,9 @@ Supported adapters:
   * VIA Technologies, Inc. VX800/VX820
     Datasheet: available on http://linux.via.com.tw
 
+  * VIA Technologies, Inc. VX855/VX875
+    Datasheet: Availability unknown
+
 Authors:
 	Kyösti Mälkki <kmalkki@cc.hut.fi>,
 	Mark D. Studebaker <mdsxyz123@yahoo.com>,
@@ -53,6 +56,7 @@ Your lspci -n listing must show one of these :
  device 1106:3287   (VT8251)
  device 1106:8324   (CX700)
  device 1106:8353   (VX800/VX820)
+ device 1106:8409   (VX855/VX875)
 
 If none of these show up, you should look in the BIOS for settings like
 enable ACPI / SMBus or even USB.

trunk/arch/mips/configs/bigsur_defconfig

@@ -963,7 +963,7 @@ CONFIG_EEPROM_LEGACY=y
 CONFIG_SENSORS_PCF8574=y
 # CONFIG_PCF8575 is not set
 CONFIG_SENSORS_PCF8591=y
-CONFIG_SENSORS_MAX6875=y
+CONFIG_EEPROM_MAX6875=y
 # CONFIG_SENSORS_TSL2550 is not set
 CONFIG_I2C_DEBUG_CORE=y
 CONFIG_I2C_DEBUG_ALGO=y

trunk/arch/mips/configs/mtx1_defconfig

@@ -1849,7 +1849,7 @@ CONFIG_EEPROM_LEGACY=m
 CONFIG_SENSORS_PCF8574=m
 CONFIG_SENSORS_PCA9539=m
 CONFIG_SENSORS_PCF8591=m
-CONFIG_SENSORS_MAX6875=m
+CONFIG_EEPROM_MAX6875=m
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set

trunk/arch/powerpc/Kconfig

@@ -93,10 +93,6 @@ config GENERIC_HWEIGHT
 	bool
 	default y
 
-config GENERIC_CALIBRATE_DELAY
-	bool
-	default y
-
 config GENERIC_FIND_NEXT_BIT
 	bool
 	default y
@@ -129,6 +125,7 @@ config PPC
 	select USE_GENERIC_SMP_HELPERS if SMP
 	select HAVE_OPROFILE
 	select HAVE_SYSCALL_WRAPPERS if PPC64
+	select GENERIC_ATOMIC64 if PPC32
 
 config EARLY_PRINTK
 	bool

trunk/arch/powerpc/boot/install.sh

@@ -18,6 +18,9 @@
 #   $5 and more - kernel boot files; zImage*, uImage, cuImage.*, etc.
 #
 
+# Bail with error code if anything goes wrong
+set -e
+
 # User may have a custom install script
 
 if [ -x ~/bin/${CROSS_COMPILE}installkernel ]; then exec ~/bin/${CROSS_COMPILE}installkernel "$@"; fi

trunk/arch/powerpc/configs/ppc6xx_defconfig

@@ -1808,7 +1808,7 @@ CONFIG_PCF8575=m
 CONFIG_SENSORS_PCA9539=m
 CONFIG_SENSORS_PCF8591=m
 # CONFIG_TPS65010 is not set
-CONFIG_SENSORS_MAX6875=m
+CONFIG_EEPROM_MAX6875=m
 CONFIG_SENSORS_TSL2550=m
 CONFIG_MCU_MPC8349EMITX=m
 # CONFIG_I2C_DEBUG_CORE is not set

trunk/arch/powerpc/include/asm/atomic.h

@@ -470,6 +470,9 @@ static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u)
 
 #define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0)
 
+#else  /* __powerpc64__ */
+#include <asm-generic/atomic64.h>
+
 #endif /* __powerpc64__ */
 
 #include <asm-generic/atomic-long.h>

trunk/arch/powerpc/include/asm/hw_irq.h

@@ -80,7 +80,7 @@ static inline void local_irq_disable(void)
 	__asm__ __volatile__("wrteei 0": : :"memory");
 #else
 	unsigned long msr;
-	__asm__ __volatile__("": : :"memory");
+
 	msr = mfmsr();
 	SET_MSR_EE(msr & ~MSR_EE);
 #endif
@@ -92,7 +92,7 @@ static inline void local_irq_enable(void)
 	__asm__ __volatile__("wrteei 1": : :"memory");
 #else
 	unsigned long msr;
-	__asm__ __volatile__("": : :"memory");
+
 	msr = mfmsr();
 	SET_MSR_EE(msr | MSR_EE);
 #endif
@@ -108,7 +108,6 @@ static inline void local_irq_save_ptr(unsigned long *flags)
 #else
 	SET_MSR_EE(msr & ~MSR_EE);
 #endif
-	__asm__ __volatile__("": : :"memory");
 }
 
 #define local_save_flags(flags)	((flags) = mfmsr())

trunk/arch/powerpc/include/asm/iommu.h

@@ -35,6 +35,16 @@
 #define IOMMU_PAGE_MASK       (~((1 << IOMMU_PAGE_SHIFT) - 1))
 #define IOMMU_PAGE_ALIGN(addr) _ALIGN_UP(addr, IOMMU_PAGE_SIZE)
 
+/* Cell page table entries */
+#define CBE_IOPTE_PP_W		0x8000000000000000ul /* protection: write */
+#define CBE_IOPTE_PP_R		0x4000000000000000ul /* protection: read */
+#define CBE_IOPTE_M		0x2000000000000000ul /* coherency required */
+#define CBE_IOPTE_SO_R		0x1000000000000000ul /* ordering: writes */
+#define CBE_IOPTE_SO_RW		0x1800000000000000ul /* ordering: r & w */
+#define CBE_IOPTE_RPN_Mask	0x07fffffffffff000ul /* RPN */
+#define CBE_IOPTE_H		0x0000000000000800ul /* cache hint */
+#define CBE_IOPTE_IOID_Mask	0x00000000000007fful /* ioid */
+
 /* Boot time flags */
 extern int iommu_is_off;
 extern int iommu_force_on;

trunk/arch/powerpc/include/asm/ps3.h

@@ -53,6 +53,13 @@ enum ps3_param_av_multi_out ps3_os_area_get_av_multi_out(void);
 extern u64 ps3_os_area_get_rtc_diff(void);
 extern void ps3_os_area_set_rtc_diff(u64 rtc_diff);
 
+struct ps3_os_area_flash_ops {
+	ssize_t (*read)(void *buf, size_t count, loff_t pos);
+	ssize_t (*write)(const void *buf, size_t count, loff_t pos);
+};
+
+extern void ps3_os_area_flash_register(const struct ps3_os_area_flash_ops *ops);
+
 /* dma routines */
 
 enum ps3_dma_page_size {
@@ -418,15 +425,15 @@ static inline struct ps3_system_bus_driver *
  * @data: Data to set
  */
 
-static inline void ps3_system_bus_set_driver_data(
+static inline void ps3_system_bus_set_drvdata(
 	struct ps3_system_bus_device *dev, void *data)
 {
-	dev->core.driver_data = data;
+	dev_set_drvdata(&dev->core, data);
 }
-static inline void *ps3_system_bus_get_driver_data(
+static inline void *ps3_system_bus_get_drvdata(
 	struct ps3_system_bus_device *dev)
 {
-	return dev->core.driver_data;
+	return dev_get_drvdata(&dev->core);
 }
 
 /* These two need global scope for get_dma_ops(). */
@@ -520,7 +527,4 @@ void ps3_sync_irq(int node);
 u32 ps3_get_hw_thread_id(int cpu);
 u64 ps3_get_spe_id(void *arg);
 
-/* mutex synchronizing GPU accesses and video mode changes */
-extern struct mutex ps3_gpu_mutex;
-
 #endif