---

yaml
---
r: 327567
b: refs/heads/master
c: 6f6bbc1
h: refs/heads/master
i:
  327565: 3c40e58
  327563: f06cbac
  327559: f77b815
  327551: 6d63e39
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 1304a7343b30fc4f16045412efdbb4179a3d9255
+refs/heads/master: 6f6bbc186dc8e4e0c628db7decbd1a5e02cb5fd8

trunk/Documentation/ABI/testing/sysfs-platform-ideapad-laptop

@@ -5,15 +5,4 @@ Contact:	"Ike Panhc <ike.pan@canonical.com>"
 Description:
 		Control the power of camera module. 1 means on, 0 means off.
 
-What:		/sys/devices/platform/ideapad/fan_mode
-Date:		June 2012
-KernelVersion:	3.6
-Contact:	"Maxim Mikityanskiy <maxtram95@gmail.com>"
-Description:
-		Change fan mode
-		There are four available modes:
-			* 0 -> Super Silent Mode
-			* 1 -> Standard Mode
-			* 2 -> Dust Cleaning
-			* 4 -> Efficient Thermal Dissipation Mode
 

trunk/Documentation/DocBook/filesystems.tmpl

@@ -224,8 +224,8 @@ all your transactions.
 </para>
 
 <para>
-Then at umount time , in your put_super() you can then call journal_destroy()
-to clean up your in-core journal object.
+Then at umount time , in your put_super() (2.4) or write_super() (2.5)
+you can then call journal_destroy() to clean up your in-core journal object.
 </para>
 
 <para>

trunk/Documentation/DocBook/media/v4l/vidioc-g-tuner.xml

@@ -125,7 +125,7 @@ the structure refers to a radio tuner the
 <constant>V4L2_TUNER_CAP_NORM</constant> flags can't be used.</para>
 <para>If multiple frequency bands are supported, then
 <structfield>capability</structfield> is the union of all
-<structfield>capability</structfield> fields of each &v4l2-frequency-band;.
+<structfield>capability></structfield> fields of each &v4l2-frequency-band;.
 </para></entry>
 	  </row>
 	  <row>

trunk/Documentation/devicetree/bindings/arm/mrvl/intc.txt

@@ -38,23 +38,3 @@ Example:
 		reg-names = "mux status", "mux mask";
 		mrvl,intc-nr-irqs = <2>;
 	};
-
-* Marvell Orion Interrupt controller
-
-Required properties
-- compatible :  Should be "marvell,orion-intc".
-- #interrupt-cells: Specifies the number of cells needed to encode an
-  interrupt source. Supported value is <1>.
-- interrupt-controller : Declare this node to be an interrupt controller.
-- reg : Interrupt mask address. A list of 4 byte ranges, one per controller.
-        One entry in the list represents 32 interrupts.
-
-Example:
-
-	intc: interrupt-controller {
-        	compatible = "marvell,orion-intc", "marvell,intc";
-		interrupt-controller;
-		#interrupt-cells = <1>;
-                reg = <0xfed20204 0x04>,
-		      <0xfed20214 0x04>;
-        };

trunk/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt

@@ -27,26 +27,3 @@ Example:
 		interrupt-controller;
 		#interrupt-cells = <1>;
       };
-
-* Marvell Orion GPIO Controller
-
-Required properties:
-- compatible         : Should be "marvell,orion-gpio"
-- reg                : Address and length of the register set for controller.
-- gpio-controller    : So we know this is a gpio controller.
-- ngpio              : How many gpios this controller has.
-- interrupts	     : Up to 4 Interrupts for the controller.
-
-Optional properties:
-- mask-offset        : For SMP Orions, offset for Nth CPU
-
-Example:
-
-		gpio0: gpio@10100 {
-			compatible = "marvell,orion-gpio";
-			#gpio-cells = <2>;
-			gpio-controller;
-			reg = <0x10100 0x40>;
-			ngpio = <32>;
-			interrupts = <35>, <36>, <37>, <38>;
-		};

trunk/Documentation/devicetree/bindings/regulator/tps6586x.txt

@@ -9,9 +9,9 @@ Required properties:
 - regulators: list of regulators provided by this controller, must have
   property "regulator-compatible" to match their hardware counterparts:
   sm[0-2], ldo[0-9] and ldo_rtc
-- vin-sm0-supply: The input supply for the SM0.
-- vin-sm1-supply: The input supply for the SM1.
-- vin-sm2-supply: The input supply for the SM2.
+- sm0-supply: The input supply for the SM0.
+- sm1-supply: The input supply for the SM1.
+- sm2-supply: The input supply for the SM2.
 - vinldo01-supply: The input supply for the LDO1 and LDO2
 - vinldo23-supply: The input supply for the LDO2 and LDO3
 - vinldo4-supply: The input supply for the LDO4
@@ -30,9 +30,9 @@ Example:
 		#gpio-cells = <2>;
 		gpio-controller;
 
-		vin-sm0-supply = <&some_reg>;
-		vin-sm1-supply = <&some_reg>;
-		vin-sm2-supply = <&some_reg>;
+		sm0-supply = <&some_reg>;
+		sm1-supply = <&some_reg>;
+		sm2-supply = <&some_reg>;
 		vinldo01-supply = <...>;
 		vinldo23-supply = <...>;
 		vinldo4-supply = <...>;

trunk/Documentation/filesystems/Locking

@@ -114,6 +114,7 @@ prototypes:
 	int (*drop_inode) (struct inode *);
 	void (*evict_inode) (struct inode *);
 	void (*put_super) (struct super_block *);
+	void (*write_super) (struct super_block *);
 	int (*sync_fs)(struct super_block *sb, int wait);
 	int (*freeze_fs) (struct super_block *);
 	int (*unfreeze_fs) (struct super_block *);
@@ -135,6 +136,7 @@ write_inode:
 drop_inode:				!!!inode->i_lock!!!
 evict_inode:
 put_super:		write
+write_super:		read
 sync_fs:		read
 freeze_fs:		write
 unfreeze_fs:		write

trunk/Documentation/filesystems/porting

@@ -94,8 +94,9 @@ protected.
 ---
 [mandatory]
 
-BKL is also moved from around sb operations. BKL should have been shifted into
-individual fs sb_op functions.  If you don't need it, remove it.
+BKL is also moved from around sb operations.  ->write_super() Is now called 
+without BKL held.  BKL should have been shifted into individual fs sb_op
+functions.  If you don't need it, remove it.  
 
 ---
 [informational]

trunk/Documentation/filesystems/vfat.txt

@@ -137,17 +137,6 @@ errors=panic|continue|remount-ro
 		 without doing anything or remount the partition in
 		 read-only mode (default behavior).
 
-discard       -- If set, issues discard/TRIM commands to the block
-		 device when blocks are freed. This is useful for SSD devices
-		 and sparse/thinly-provisoned LUNs.
-
-nfs           -- This option maintains an index (cache) of directory
-		 inodes by i_logstart which is used by the nfs-related code to
-		 improve look-ups.
-
-		 Enable this only if you want to export the FAT filesystem
-		 over NFS
-
 <bool>: 0,1,yes,no,true,false
 
 TODO

trunk/Documentation/filesystems/vfs.txt

@@ -216,6 +216,7 @@ struct super_operations {
         void (*drop_inode) (struct inode *);
         void (*delete_inode) (struct inode *);
         void (*put_super) (struct super_block *);
+        void (*write_super) (struct super_block *);
         int (*sync_fs)(struct super_block *sb, int wait);
         int (*freeze_fs) (struct super_block *);
         int (*unfreeze_fs) (struct super_block *);
@@ -272,6 +273,9 @@ or bottom half).
   put_super: called when the VFS wishes to free the superblock
 	(i.e. unmount). This is called with the superblock lock held
 
+  write_super: called when the VFS superblock needs to be written to
+	disc. This method is optional
+
   sync_fs: called when VFS is writing out all dirty data associated with
   	a superblock. The second parameter indicates whether the method
 	should wait until the write out has been completed. Optional.

trunk/Documentation/laptops/laptop-mode.txt

@@ -262,9 +262,9 @@ MINIMUM_BATTERY_MINUTES=10
 
 #
 # Allowed dirty background ratio, in percent.  Once DIRTY_RATIO has been
-# exceeded, the kernel will wake flusher threads which will then reduce the
-# amount of dirty memory to dirty_background_ratio.  Set this nice and low,
-# so once some writeout has commenced, we do a lot of it.
+# exceeded, the kernel will wake pdflush which will then reduce the amount
+# of dirty memory to dirty_background_ratio.  Set this nice and low, so once
+# some writeout has commenced, we do a lot of it.
 #
 #DIRTY_BACKGROUND_RATIO=5
 
@@ -384,9 +384,9 @@ CPU_MAXFREQ=${CPU_MAXFREQ:-'slowest'}
 
 #
 # Allowed dirty background ratio, in percent.  Once DIRTY_RATIO has been
-# exceeded, the kernel will wake flusher threads which will then reduce the
-# amount of dirty memory to dirty_background_ratio.  Set this nice and low,
-# so once some writeout has commenced, we do a lot of it.
+# exceeded, the kernel will wake pdflush which will then reduce the amount
+# of dirty memory to dirty_background_ratio.  Set this nice and low, so once
+# some writeout has commenced, we do a lot of it.
 #
 DIRTY_BACKGROUND_RATIO=${DIRTY_BACKGROUND_RATIO:-'5'}
 

trunk/Documentation/networking/netconsole.txt

@@ -51,23 +51,8 @@ Built-in netconsole starts immediately after the TCP stack is
 initialized and attempts to bring up the supplied dev at the supplied
 address.
 
-The remote host has several options to receive the kernel messages,
-for example:
-
-1) syslogd
-
-2) netcat
-
-   On distributions using a BSD-based netcat version (e.g. Fedora,
-   openSUSE and Ubuntu) the listening port must be specified without
-   the -p switch:
-
-   'nc -u -l -p <port>' / 'nc -u -l <port>' or
-   'netcat -u -l -p <port>' / 'netcat -u -l <port>'
-
-3) socat
-
-   'socat udp-recv:<port> -'
+The remote host can run either 'netcat -u -l -p <port>',
+'nc -l -u <port>' or syslogd.
 
 Dynamic reconfiguration:
 ========================

trunk/Documentation/pinctrl.txt

@@ -840,9 +840,9 @@ static unsigned long i2c_pin_configs[] = {
 
 static struct pinctrl_map __initdata mapping[] = {
 	PIN_MAP_MUX_GROUP("foo-i2c.0", PINCTRL_STATE_DEFAULT, "pinctrl-foo", "i2c0", "i2c0"),
-	PIN_MAP_CONFIGS_GROUP("foo-i2c.0", PINCTRL_STATE_DEFAULT, "pinctrl-foo", "i2c0", i2c_grp_configs),
-	PIN_MAP_CONFIGS_PIN("foo-i2c.0", PINCTRL_STATE_DEFAULT, "pinctrl-foo", "i2c0scl", i2c_pin_configs),
-	PIN_MAP_CONFIGS_PIN("foo-i2c.0", PINCTRL_STATE_DEFAULT, "pinctrl-foo", "i2c0sda", i2c_pin_configs),
+	PIN_MAP_MUX_CONFIGS_GROUP("foo-i2c.0", PINCTRL_STATE_DEFAULT, "pinctrl-foo", "i2c0", i2c_grp_configs),
+	PIN_MAP_MUX_CONFIGS_PIN("foo-i2c.0", PINCTRL_STATE_DEFAULT, "pinctrl-foo", "i2c0scl", i2c_pin_configs),
+	PIN_MAP_MUX_CONFIGS_PIN("foo-i2c.0", PINCTRL_STATE_DEFAULT, "pinctrl-foo", "i2c0sda", i2c_pin_configs),
 };
 
 Finally, some devices expect the mapping table to contain certain specific

trunk/Documentation/security/Yama.txt

@@ -46,27 +46,27 @@ restrictions, it can call prctl(PR_SET_PTRACER, PR_SET_PTRACER_ANY, ...)
 so that any otherwise allowed process (even those in external pid namespaces)
 may attach.
 
-The sysctl settings (writable only with CAP_SYS_PTRACE) are:
+These restrictions do not change how ptrace via PTRACE_TRACEME operates.
+
+The sysctl settings are:
 
 0 - classic ptrace permissions: a process can PTRACE_ATTACH to any other
     process running under the same uid, as long as it is dumpable (i.e.
     did not transition uids, start privileged, or have called
-    prctl(PR_SET_DUMPABLE...) already). Similarly, PTRACE_TRACEME is
-    unchanged.
+    prctl(PR_SET_DUMPABLE...) already).
 
 1 - restricted ptrace: a process must have a predefined relationship
     with the inferior it wants to call PTRACE_ATTACH on. By default,
     this relationship is that of only its descendants when the above
     classic criteria is also met. To change the relationship, an
     inferior can call prctl(PR_SET_PTRACER, debugger, ...) to declare
     an allowed debugger PID to call PTRACE_ATTACH on the inferior.
-    Using PTRACE_TRACEME is unchanged.
 
 2 - admin-only attach: only processes with CAP_SYS_PTRACE may use ptrace
-    with PTRACE_ATTACH, or through children calling PTRACE_TRACEME.
+    with PTRACE_ATTACH.
 
-3 - no attach: no processes may use ptrace with PTRACE_ATTACH nor via
-    PTRACE_TRACEME. Once set, this sysctl value cannot be changed.
+3 - no attach: no processes may use ptrace with PTRACE_ATTACH. Once set,
+    this sysctl cannot be changed to a lower value.
 
 The original children-only logic was based on the restrictions in grsecurity.
 

trunk/Documentation/sysctl/vm.txt

@@ -76,8 +76,8 @@ huge pages although processes will also directly compact memory as required.
 
 dirty_background_bytes
 
-Contains the amount of dirty memory at which the background kernel
-flusher threads will start writeback.
+Contains the amount of dirty memory at which the pdflush background writeback
+daemon will start writeback.
 
 Note: dirty_background_bytes is the counterpart of dirty_background_ratio. Only
 one of them may be specified at a time. When one sysctl is written it is
@@ -89,7 +89,7 @@ other appears as 0 when read.
 dirty_background_ratio
 
 Contains, as a percentage of total system memory, the number of pages at which
-the background kernel flusher threads will start writing out dirty data.
+the pdflush background writeback daemon will start writing out dirty data.
 
 ==============================================================
 
@@ -112,9 +112,9 @@ retained.
 dirty_expire_centisecs
 
 This tunable is used to define when dirty data is old enough to be eligible
-for writeout by the kernel flusher threads.  It is expressed in 100'ths
-of a second.  Data which has been dirty in-memory for longer than this
-interval will be written out next time a flusher thread wakes up.
+for writeout by the pdflush daemons.  It is expressed in 100'ths of a second.
+Data which has been dirty in-memory for longer than this interval will be
+written out next time a pdflush daemon wakes up.
 
 ==============================================================
 
@@ -128,7 +128,7 @@ data.
 
 dirty_writeback_centisecs
 
-The kernel flusher threads will periodically wake up and write `old' data
+The pdflush writeback daemons will periodically wake up and write `old' data
 out to disk.  This tunable expresses the interval between those wakeups, in
 100'ths of a second.
 

trunk/Documentation/vm/hugetlbpage.txt

@@ -299,17 +299,11 @@ map_hugetlb.c.
 *******************************************************************
 
 /*
- * map_hugetlb: see tools/testing/selftests/vm/map_hugetlb.c
+ * hugepage-shm:  see Documentation/vm/hugepage-shm.c
  */
 
 *******************************************************************
 
 /*
- * hugepage-shm:  see tools/testing/selftests/vm/hugepage-shm.c
- */
-
-*******************************************************************
-
-/*
- * hugepage-mmap:  see tools/testing/selftests/vm/hugepage-mmap.c
+ * hugepage-mmap:  see Documentation/vm/hugepage-mmap.c
  */

trunk/Documentation/w1/slaves/w1_therm

@@ -3,7 +3,6 @@ Kernel driver w1_therm
 
 Supported chips:
   * Maxim ds18*20 based temperature sensors.
-  * Maxim ds1825 based temperature sensors.
 
 Author: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
 
@@ -16,7 +15,6 @@ supported family codes:
 W1_THERM_DS18S20	0x10
 W1_THERM_DS1822		0x22
 W1_THERM_DS18B20	0x28
-W1_THERM_DS1825		0x3B
 
 Support is provided through the sysfs w1_slave file.  Each open and
 read sequence will initiate a temperature conversion then provide two