[PATCH] bcm43xx: Interrogate hardware-enable switch and update LEDs

The current bcm43xx driver ignores any wireless-enable switches on mini-PCI
and mini-PCI-E cards. This patch implements a new routine to interrogate the
radio hardware enabled bit in the interface, logs the initial state and any
changes in the switch (if debugging enabled), activates the LED to show the
state, and changes the periodic work handler to provide 1 second response
to switch changes and to account for changes in the periodic work specs.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/bcm43xx/bcm43xx.h

@@ -352,6 +352,10 @@
 #define BCM43xx_UCODEFLAG_UNKPACTRL	0x0040
 #define BCM43xx_UCODEFLAG_JAPAN		0x0080
 
+/* Hardware Radio Enable masks */
+#define BCM43xx_MMIO_RADIO_HWENABLED_HI_MASK (1 << 16)
+#define BCM43xx_MMIO_RADIO_HWENABLED_LO_MASK (1 << 4)
+
 /* Generic-Interrupt reasons. */
 #define BCM43xx_IRQ_READY		(1 << 0)
 #define BCM43xx_IRQ_BEACON		(1 << 1)
@@ -758,7 +762,8 @@ struct bcm43xx_private {
 	    bad_frames_preempt:1,	/* Use "Bad Frames Preemption" (default off) */
 	    reg124_set_0x4:1,		/* Some variable to keep track of IRQ stuff. */
 	    short_preamble:1,		/* TRUE, if short preamble is enabled. */
-	    firmware_norelease:1;	/* Do not release the firmware. Used on suspend. */
+	    firmware_norelease:1,	/* Do not release the firmware. Used on suspend. */
+	    radio_hw_enable:1;		/* TRUE if radio is hardware enabled */
 
 	struct bcm43xx_stats stats;
 

drivers/net/wireless/bcm43xx/bcm43xx_leds.c

@@ -26,6 +26,7 @@
 */
 
 #include "bcm43xx_leds.h"
+#include "bcm43xx_radio.h"
 #include "bcm43xx.h"
 
 #include <asm/bitops.h>
@@ -108,6 +109,7 @@ static void bcm43xx_led_init_hardcoded(struct bcm43xx_private *bcm,
 	switch (led_index) {
 	case 0:
 		led->behaviour = BCM43xx_LED_ACTIVITY;
+		led->activelow = 1;
 		if (bcm->board_vendor == PCI_VENDOR_ID_COMPAQ)
 			led->behaviour = BCM43xx_LED_RADIO_ALL;
 		break;
@@ -199,20 +201,21 @@ void bcm43xx_leds_update(struct bcm43xx_private *bcm, int activity)
 			turn_on = activity;
 			break;
 		case BCM43xx_LED_RADIO_ALL:
-			turn_on = radio->enabled;
+			turn_on = radio->enabled && bcm43xx_is_hw_radio_enabled(bcm);
 			break;
 		case BCM43xx_LED_RADIO_A:
 		case BCM43xx_LED_BCM4303_2:
-			turn_on = (radio->enabled && phy->type == BCM43xx_PHYTYPE_A);
+			turn_on = (radio->enabled && bcm43xx_is_hw_radio_enabled(bcm) &&
+				   phy->type == BCM43xx_PHYTYPE_A);
 			break;
 		case BCM43xx_LED_RADIO_B:
 		case BCM43xx_LED_BCM4303_1:
-			turn_on = (radio->enabled &&
+			turn_on = (radio->enabled && bcm43xx_is_hw_radio_enabled(bcm) &&
 				   (phy->type == BCM43xx_PHYTYPE_B ||
 				    phy->type == BCM43xx_PHYTYPE_G));
 			break;
 		case BCM43xx_LED_MODE_BG:
-			if (phy->type == BCM43xx_PHYTYPE_G &&
+			if (phy->type == BCM43xx_PHYTYPE_G && bcm43xx_is_hw_radio_enabled(bcm) &&
 			    1/*FIXME: using G rates.*/)
 				turn_on = 1;
 			break;

drivers/net/wireless/bcm43xx/bcm43xx_main.c

@@ -2441,6 +2441,9 @@ static int bcm43xx_chip_init(struct bcm43xx_private *bcm)
 	if (err)
 		goto err_gpio_cleanup;
 	bcm43xx_radio_turn_on(bcm);
+	bcm->radio_hw_enable = bcm43xx_is_hw_radio_enabled(bcm);
+	dprintk(KERN_INFO PFX "Radio %s by hardware\n",
+		(bcm->radio_hw_enable == 0) ? "disabled" : "enabled");
 
 	bcm43xx_write16(bcm, 0x03E6, 0x0000);
 	err = bcm43xx_phy_init(bcm);
@@ -3174,10 +3177,25 @@ static void bcm43xx_periodic_every30sec(struct bcm43xx_private *bcm)
 }
 
 static void bcm43xx_periodic_every15sec(struct bcm43xx_private *bcm)
+{
+	bcm43xx_phy_xmitpower(bcm); //FIXME: unless scanning?
+	//TODO for APHY (temperature?)
+}
+
+static void bcm43xx_periodic_every1sec(struct bcm43xx_private *bcm)
 {
 	struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm);
 	struct bcm43xx_radioinfo *radio = bcm43xx_current_radio(bcm);
+	int radio_hw_enable;
 
+	/* check if radio hardware enabled status changed */
+	radio_hw_enable = bcm43xx_is_hw_radio_enabled(bcm);
+	if (unlikely(bcm->radio_hw_enable != radio_hw_enable)) {
+		bcm->radio_hw_enable = radio_hw_enable;
+		dprintk(KERN_INFO PFX "Radio hardware status changed to %s\n",
+		       (radio_hw_enable == 0) ? "disabled" : "enabled");
+		bcm43xx_leds_update(bcm, 0);
+	}
 	if (phy->type == BCM43xx_PHYTYPE_G) {
 		//TODO: update_aci_moving_average
 		if (radio->aci_enable && radio->aci_wlan_automatic) {
@@ -3201,21 +3219,21 @@ static void bcm43xx_periodic_every15sec(struct bcm43xx_private *bcm)
 			//TODO: implement rev1 workaround
 		}
 	}
-	bcm43xx_phy_xmitpower(bcm); //FIXME: unless scanning?
-	//TODO for APHY (temperature?)
 }
 
 static void do_periodic_work(struct bcm43xx_private *bcm)
 {
-	if (bcm->periodic_state % 8 == 0)
+	if (bcm->periodic_state % 120 == 0)
 		bcm43xx_periodic_every120sec(bcm);
-	if (bcm->periodic_state % 4 == 0)
+	if (bcm->periodic_state % 60 == 0)
 		bcm43xx_periodic_every60sec(bcm);
-	if (bcm->periodic_state % 2 == 0)
+	if (bcm->periodic_state % 30 == 0)
 		bcm43xx_periodic_every30sec(bcm);
-	bcm43xx_periodic_every15sec(bcm);
+	if (bcm->periodic_state % 15 == 0)
+		bcm43xx_periodic_every15sec(bcm);
+	bcm43xx_periodic_every1sec(bcm);
 
-	schedule_delayed_work(&bcm->periodic_work, HZ * 15);
+	schedule_delayed_work(&bcm->periodic_work, HZ);
 }
 
 static void bcm43xx_periodic_work_handler(struct work_struct *work)
@@ -3228,7 +3246,7 @@ static void bcm43xx_periodic_work_handler(struct work_struct *work)
 	unsigned long orig_trans_start = 0;
 
 	mutex_lock(&bcm->mutex);
-	if (unlikely(bcm->periodic_state % 4 == 0)) {
+	if (unlikely(bcm->periodic_state % 60 == 0)) {
 		/* Periodic work will take a long time, so we want it to
 		 * be preemtible.
 		 */
@@ -3260,7 +3278,7 @@ static void bcm43xx_periodic_work_handler(struct work_struct *work)
 
 	do_periodic_work(bcm);
 
-	if (unlikely(bcm->periodic_state % 4 == 0)) {
+	if (unlikely(bcm->periodic_state % 60 == 0)) {
 		spin_lock_irqsave(&bcm->irq_lock, flags);
 		tasklet_enable(&bcm->isr_tasklet);
 		bcm43xx_interrupt_enable(bcm, savedirqs);

drivers/net/wireless/bcm43xx/bcm43xx_radio.c

@@ -1981,6 +1981,7 @@ void bcm43xx_radio_turn_on(struct bcm43xx_private *bcm)
 	}
 	radio->enabled = 1;
 	dprintk(KERN_INFO PFX "Radio turned on\n");
+	bcm43xx_leds_update(bcm, 0);
 }
 
 void bcm43xx_radio_turn_off(struct bcm43xx_private *bcm)
@@ -2001,6 +2002,7 @@ void bcm43xx_radio_turn_off(struct bcm43xx_private *bcm)
 		bcm43xx_phy_write(bcm, 0x0015, 0xAA00);
 	radio->enabled = 0;
 	dprintk(KERN_INFO PFX "Radio turned off\n");
+	bcm43xx_leds_update(bcm, 0);
 }
 
 void bcm43xx_radio_clear_tssi(struct bcm43xx_private *bcm)

drivers/net/wireless/bcm43xx/bcm43xx_radio.h

@@ -65,6 +65,22 @@ void bcm43xx_radio_init2060(struct bcm43xx_private *bcm);
 void bcm43xx_radio_turn_on(struct bcm43xx_private *bcm);
 void bcm43xx_radio_turn_off(struct bcm43xx_private *bcm);
 
+static inline
+int bcm43xx_is_hw_radio_enabled(struct bcm43xx_private *bcm)
+{
+	/* function to return state of hardware enable of radio
+	 * returns 0 if radio disabled, 1 if radio enabled
+	 */
+	if (bcm->current_core->rev >= 3)
+		return ((bcm43xx_read32(bcm, BCM43xx_MMIO_RADIO_HWENABLED_HI)
+					& BCM43xx_MMIO_RADIO_HWENABLED_HI_MASK)
+					== 0) ? 1 : 0;
+	else
+		return ((bcm43xx_read16(bcm, BCM43xx_MMIO_RADIO_HWENABLED_LO)
+					& BCM43xx_MMIO_RADIO_HWENABLED_LO_MASK)
+					== 0) ? 0 : 1;
+}
+
 int bcm43xx_radio_selectchannel(struct bcm43xx_private *bcm, u8 channel,
 				int synthetic_pu_workaround);