Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/g…

…it/lenb/linux-acpi-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  ACPI / PM: Do not enable GPEs for system wakeup in advance
  ACPICA: Truncate I/O addresses to 16 bits for Windows compatibility
  ACPICA: Limit maximum time for Sleep() operator
  ACPICA: Fix namestring associated with AE_NO_HANDLER exception
  ACPI / ACPICA: Fix sysfs GPE interface
  ACPI / ACPICA: Fix GPE initialization
  ACPI / ACPICA: Avoid writing full enable masks to GPE registers
  ACPI / ACPICA: Fix low-level GPE manipulation code
  ACPI / ACPICA: Use helper function for computing GPE masks
  ACPI / ACPICA: Do not attempt to disable GPE when installing handler
  ACPI: Disable Vista compatibility for Sony VGN-NS50B_L
  ACPI: fan: fix unbalanced code block
  ACPI: Store NVS state even when entering suspend to RAM
  suspend: Move NVS save/restore code to generic suspend functionality
  ACPI: Do not try to set up acpi processor stuff on cores exceeding maxcpus=
  ACPI: acpi_pad: Don't needlessly mark LAPIC unstable

arch/x86/kernel/e820.c

@@ -729,7 +729,7 @@ static int __init e820_mark_nvs_memory(void)
 		struct e820entry *ei = &e820.map[i];
 
 		if (ei->type == E820_NVS)
-			hibernate_nvs_register(ei->addr, ei->size);
+			suspend_nvs_register(ei->addr, ei->size);
 	}
 
 	return 0;

drivers/acpi/acpi_pad.c

@@ -46,6 +46,8 @@ static unsigned long power_saving_mwait_eax;
 
 static unsigned char tsc_detected_unstable;
 static unsigned char tsc_marked_unstable;
+static unsigned char lapic_detected_unstable;
+static unsigned char lapic_marked_unstable;
 
 static void power_saving_mwait_init(void)
 {
@@ -75,9 +77,6 @@ static void power_saving_mwait_init(void)
 	power_saving_mwait_eax = (highest_cstate << MWAIT_SUBSTATE_SIZE) |
 		(highest_subcstate - 1);
 
-	for_each_online_cpu(i)
-		clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ON, &i);
-
 #if defined(CONFIG_GENERIC_TIME) && defined(CONFIG_X86)
 	switch (boot_cpu_data.x86_vendor) {
 	case X86_VENDOR_AMD:
@@ -86,13 +85,15 @@ static void power_saving_mwait_init(void)
 		 * AMD Fam10h TSC will tick in all
 		 * C/P/S0/S1 states when this bit is set.
 		 */
-		if (boot_cpu_has(X86_FEATURE_NONSTOP_TSC))
-			return;
-
-		/*FALL THROUGH*/
+		if (!boot_cpu_has(X86_FEATURE_NONSTOP_TSC))
+			tsc_detected_unstable = 1;
+		if (!boot_cpu_has(X86_FEATURE_ARAT))
+			lapic_detected_unstable = 1;
+		break;
 	default:
-		/* TSC could halt in idle */
+		/* TSC & LAPIC could halt in idle */
 		tsc_detected_unstable = 1;
+		lapic_detected_unstable = 1;
 	}
 #endif
 }
@@ -180,10 +181,20 @@ static int power_saving_thread(void *data)
 				mark_tsc_unstable("TSC halts in idle");
 				tsc_marked_unstable = 1;
 			}
+			if (lapic_detected_unstable && !lapic_marked_unstable) {
+				int i;
+				/* LAPIC could halt in idle, so notify users */
+				for_each_online_cpu(i)
+					clockevents_notify(
+						CLOCK_EVT_NOTIFY_BROADCAST_ON,
+						&i);
+				lapic_marked_unstable = 1;
+			}
 			local_irq_disable();
 			cpu = smp_processor_id();
-			clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER,
-				&cpu);
+			if (lapic_marked_unstable)
+				clockevents_notify(
+					CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu);
 			stop_critical_timings();
 
 			__monitor((void *)&current_thread_info()->flags, 0, 0);
@@ -192,8 +203,9 @@ static int power_saving_thread(void *data)
 				__mwait(power_saving_mwait_eax, 1);
 
 			start_critical_timings();
-			clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT,
-				&cpu);
+			if (lapic_marked_unstable)
+				clockevents_notify(
+					CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &cpu);
 			local_irq_enable();
 
 			if (jiffies > expire_time) {

drivers/acpi/acpica/acconfig.h

@@ -119,6 +119,10 @@
 
 #define ACPI_MAX_LOOP_ITERATIONS        0xFFFF
 
+/* Maximum sleep allowed via Sleep() operator */
+
+#define ACPI_MAX_SLEEP                  20000	/* Two seconds */
+
 /******************************************************************************
  *
  * ACPI Specification constants (Do not change unless the specification changes)

drivers/acpi/acpica/acevents.h

@@ -80,10 +80,6 @@ u32 acpi_ev_gpe_detect(struct acpi_gpe_xrupt_info *gpe_xrupt_list);
 acpi_status
 acpi_ev_update_gpe_enable_masks(struct acpi_gpe_event_info *gpe_event_info);
 
-acpi_status acpi_ev_enable_gpe(struct acpi_gpe_event_info *gpe_event_info);
-
-acpi_status acpi_ev_disable_gpe(struct acpi_gpe_event_info *gpe_event_info);
-
 struct acpi_gpe_event_info *acpi_ev_get_gpe_event_info(acpi_handle gpe_device,
 						       u32 gpe_number);
 

drivers/acpi/acpica/acglobal.h

@@ -125,6 +125,14 @@ u8 ACPI_INIT_GLOBAL(acpi_gbl_enable_aml_debug_object, FALSE);
  */
 u8 ACPI_INIT_GLOBAL(acpi_gbl_copy_dsdt_locally, FALSE);
 
+/*
+ * Optionally truncate I/O addresses to 16 bits. Provides compatibility
+ * with other ACPI implementations. NOTE: During ACPICA initialization,
+ * this value is set to TRUE if any Windows OSI strings have been
+ * requested by the BIOS.
+ */
+u8 ACPI_INIT_GLOBAL(acpi_gbl_truncate_io_addresses, FALSE);
+
 /* acpi_gbl_FADT is a local copy of the FADT, converted to a common format. */
 
 struct acpi_table_fadt acpi_gbl_FADT;

drivers/acpi/acpica/achware.h

@@ -90,7 +90,11 @@ acpi_status acpi_hw_write_port(acpi_io_address address, u32 value, u32 width);
 /*
  * hwgpe - GPE support
  */
-acpi_status acpi_hw_low_disable_gpe(struct acpi_gpe_event_info *gpe_event_info);
+u32 acpi_hw_gpe_register_bit(struct acpi_gpe_event_info *gpe_event_info,
+			     struct acpi_gpe_register_info *gpe_register_info);
+
+acpi_status
+acpi_hw_low_set_gpe(struct acpi_gpe_event_info *gpe_event_info, u8 action);
 
 acpi_status
 acpi_hw_write_gpe_enable_reg(struct acpi_gpe_event_info *gpe_event_info);

drivers/acpi/acpica/evgpe.c

@@ -69,7 +69,7 @@ acpi_status
 acpi_ev_update_gpe_enable_masks(struct acpi_gpe_event_info *gpe_event_info)
 {
 	struct acpi_gpe_register_info *gpe_register_info;
-	u8 register_bit;
+	u32 register_bit;
 
 	ACPI_FUNCTION_TRACE(ev_update_gpe_enable_masks);
 
@@ -78,9 +78,8 @@ acpi_ev_update_gpe_enable_masks(struct acpi_gpe_event_info *gpe_event_info)
 		return_ACPI_STATUS(AE_NOT_EXIST);
 	}
 
-	register_bit = (u8)
-	    (1 <<
-	     (gpe_event_info->gpe_number - gpe_register_info->base_gpe_number));
+	register_bit = acpi_hw_gpe_register_bit(gpe_event_info,
+						gpe_register_info);
 
 	/* Clear the wake/run bits up front */
 
@@ -100,106 +99,6 @@ acpi_ev_update_gpe_enable_masks(struct acpi_gpe_event_info *gpe_event_info)
 	return_ACPI_STATUS(AE_OK);
 }
 
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ev_enable_gpe
- *
- * PARAMETERS:  gpe_event_info          - GPE to enable
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Hardware-enable a GPE. Always enables the GPE, regardless
- *              of type or number of references.
- *
- * Note: The GPE lock should be already acquired when this function is called.
- *
- ******************************************************************************/
-
-acpi_status acpi_ev_enable_gpe(struct acpi_gpe_event_info *gpe_event_info)
-{
-	acpi_status status;
-
-
-	ACPI_FUNCTION_TRACE(ev_enable_gpe);
-
-
-	/*
-	 * We will only allow a GPE to be enabled if it has either an
-	 * associated method (_Lxx/_Exx) or a handler. Otherwise, the
-	 * GPE will be immediately disabled by acpi_ev_gpe_dispatch the
-	 * first time it fires.
-	 */
-	if (!(gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK)) {
-		return_ACPI_STATUS(AE_NO_HANDLER);
-	}
-
-	/* Ensure the HW enable masks are current */
-
-	status = acpi_ev_update_gpe_enable_masks(gpe_event_info);
-	if (ACPI_FAILURE(status)) {
-		return_ACPI_STATUS(status);
-	}
-
-	/* Clear the GPE (of stale events) */
-
-	status = acpi_hw_clear_gpe(gpe_event_info);
-	if (ACPI_FAILURE(status)) {
-		return_ACPI_STATUS(status);
-	}
-
-	/* Enable the requested GPE */
-
-	status = acpi_hw_write_gpe_enable_reg(gpe_event_info);
-	return_ACPI_STATUS(status);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ev_disable_gpe
- *
- * PARAMETERS:  gpe_event_info          - GPE to disable
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Hardware-disable a GPE. Always disables the requested GPE,
- *              regardless of the type or number of references.
- *
- * Note: The GPE lock should be already acquired when this function is called.
- *
- ******************************************************************************/
-
-acpi_status acpi_ev_disable_gpe(struct acpi_gpe_event_info *gpe_event_info)
-{
-	acpi_status status;
-
-	ACPI_FUNCTION_TRACE(ev_disable_gpe);
-
-
-	/*
-	 * Note: Always disable the GPE, even if we think that that it is already
-	 * disabled. It is possible that the AML or some other code has enabled
-	 * the GPE behind our back.
-	 */
-
-	/* Ensure the HW enable masks are current */
-
-	status = acpi_ev_update_gpe_enable_masks(gpe_event_info);
-	if (ACPI_FAILURE(status)) {
-		return_ACPI_STATUS(status);
-	}
-
-	/*
-	 * Always H/W disable this GPE, even if we don't know the GPE type.
-	 * Simply clear the enable bit for this particular GPE, but do not
-	 * write out the current GPE enable mask since this may inadvertently
-	 * enable GPEs too early. An example is a rogue GPE that has arrived
-	 * during ACPICA initialization - possibly because AML or other code
-	 * has enabled the GPE.
-	 */
-	status = acpi_hw_low_disable_gpe(gpe_event_info);
-	return_ACPI_STATUS(status);
-}
-
 
 /*******************************************************************************
  *
@@ -451,10 +350,6 @@ static void ACPI_SYSTEM_XFACE acpi_ev_asynch_execute_gpe_method(void *context)
 		return_VOID;
 	}
 
-	/* Update the GPE register masks for return to enabled state */
-
-	(void)acpi_ev_update_gpe_enable_masks(gpe_event_info);
-
 	/*
 	 * Take a snapshot of the GPE info for this level - we copy the info to
 	 * prevent a race condition with remove_handler/remove_block.
@@ -607,7 +502,7 @@ acpi_ev_gpe_dispatch(struct acpi_gpe_event_info *gpe_event_info, u32 gpe_number)
 		 * Disable the GPE, so it doesn't keep firing before the method has a
 		 * chance to run (it runs asynchronously with interrupts enabled).
 		 */
-		status = acpi_ev_disable_gpe(gpe_event_info);
+		status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_DISABLE);
 		if (ACPI_FAILURE(status)) {
 			ACPI_EXCEPTION((AE_INFO, status,
 					"Unable to disable GPE[0x%2X]",
@@ -644,7 +539,7 @@ acpi_ev_gpe_dispatch(struct acpi_gpe_event_info *gpe_event_info, u32 gpe_number)
 		 * Disable the GPE. The GPE will remain disabled a handler
 		 * is installed or ACPICA is restarted.
 		 */
-		status = acpi_ev_disable_gpe(gpe_event_info);
+		status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_DISABLE);
 		if (ACPI_FAILURE(status)) {
 			ACPI_EXCEPTION((AE_INFO, status,
 					"Unable to disable GPE[0x%2X]",

drivers/acpi/acpica/evgpeblk.c

@@ -500,6 +500,19 @@ acpi_ev_initialize_gpe_block(struct acpi_namespace_node *gpe_device,
 
 			gpe_index = (i * ACPI_GPE_REGISTER_WIDTH) + j;
 			gpe_event_info = &gpe_block->event_info[gpe_index];
+			gpe_number = gpe_index + gpe_block->block_base_number;
+
+			/*
+			 * If the GPE has already been enabled for runtime
+			 * signaling, make sure it remains enabled, but do not
+			 * increment its reference counter.
+			 */
+			if (gpe_event_info->runtime_count) {
+				acpi_set_gpe(gpe_device, gpe_number,
+						ACPI_GPE_ENABLE);
+				gpe_enabled_count++;
+				continue;
+			}
 
 			if (gpe_event_info->flags & ACPI_GPE_CAN_WAKE) {
 				wake_gpe_count++;
@@ -516,7 +529,6 @@ acpi_ev_initialize_gpe_block(struct acpi_namespace_node *gpe_device,
 
 			/* Enable this GPE */
 
-			gpe_number = gpe_index + gpe_block->block_base_number;
 			status = acpi_enable_gpe(gpe_device, gpe_number,
 						 ACPI_GPE_TYPE_RUNTIME);
 			if (ACPI_FAILURE(status)) {

drivers/acpi/acpica/evxface.c

@@ -719,13 +719,6 @@ acpi_install_gpe_handler(acpi_handle gpe_device,
 	handler->context = context;
 	handler->method_node = gpe_event_info->dispatch.method_node;
 
-	/* Disable the GPE before installing the handler */
-
-	status = acpi_ev_disable_gpe(gpe_event_info);
-	if (ACPI_FAILURE (status)) {
-		goto unlock_and_exit;
-	}
-
 	/* Install the handler */
 
 	flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);