---

yaml --- r: 1375 b: refs/heads/master c: 5633684 h: refs/heads/master i: 1373: 8eb826b 1371: fe97180 1367: fc254a0 1359: dab2ce7 1343: 3949530 v: v3
git-mirror · May 13, 2005 · 02d330f · 02d330f
1 parent 996f614
commit 02d330f
Show file tree

Hide file tree

Showing 341 changed files with 7,328 additions and 14,516 deletions.
diff --git a/[refs] b/[refs]
@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 34812c9e188b47b1d6c9fff8ba530e6f2365ebc4
+refs/heads/master: 5633684d008b777ab169e8efcef39a898482f531
diff --git a/trunk/CREDITS b/trunk/CREDITS
@@ -882,12 +882,13 @@ S: Blacksburg, Virginia 24061
 S: USA
 
 N: Randy Dunlap
-E: rdunlap@xenotime.net
+E: rddunlap@osdl.org
 W: http://www.xenotime.net/linux/linux.html
 W: http://www.linux-usb.org
 D: Linux-USB subsystem, USB core/UHCI/printer/storage drivers
 D: x86 SMP, ACPI, bootflag hacking
-S: (ask for current address)
+S: 12725 SW Millikan Way, Suite 400
+S: Beaverton, Oregon 97005
 S: USA
 
 N: Bob Dunlop

diff --git a/trunk/Documentation/cpusets.txt b/trunk/Documentation/cpusets.txt
@@ -252,7 +252,8 @@ in a tasks processor placement.
 There is an exception to the above.  If hotplug funtionality is used
 to remove all the CPUs that are currently assigned to a cpuset,
 then the kernel will automatically update the cpus_allowed of all
-tasks attached to CPUs in that cpuset to allow all CPUs.  When memory
+tasks attached to CPUs in that cpuset with the online CPUs of the
+nearest parent cpuset that still has some CPUs online.  When memory
 hotplug functionality for removing Memory Nodes is available, a
 similar exception is expected to apply there as well.  In general,
 the kernel prefers to violate cpuset placement, over starving a task

diff --git a/trunk/Documentation/dvb/README.flexcop b/trunk/Documentation/dvb/README.flexcop
diff --git a/trunk/Documentation/dvb/bt8xx.txt b/trunk/Documentation/dvb/bt8xx.txt
@@ -17,53 +17,74 @@ Because of this, you need to enable
 "Device drivers" => "Multimedia devices"
   => "Video For Linux" => "BT848 Video For Linux"
 
-Furthermore you need to enable
-"Device drivers" => "Multimedia devices" => "Digital Video Broadcasting Devices"
-  => "DVB for Linux" "DVB Core Support" "Nebula/Pinnacle PCTV/TwinHan PCI Cards"
-
 2) Loading Modules
 ==================
 
 In general you need to load the bttv driver, which will handle the gpio and
-i2c communication for us, plus the common dvb-bt8xx device driver.
-The frontends for Nebula (nxt6000), Pinnacle PCTV (cx24110) and
-TwinHan (dst) are loaded automatically by the dvb-bt8xx device driver.
+i2c communication for us. Next you need the common dvb-bt8xx device driver
+and one frontend driver.
+
+The bttv driver will HANG YOUR SYSTEM IF YOU DO NOT SPECIFY THE CORRECT 
+CARD ID!
+
+(If you don't get your card running and you suspect that the card id you're
+using is wrong, have a look at "bttv-cards.c" for a list of possible card
+ids.)
+
+Pay attention to failures when you load the frontend drivers
+(e.g. dmesg, /var/log/messages).
 
 3a) Nebula / Pinnacle PCTV
 --------------------------
 
-   $ modprobe bttv (normally bttv is being loaded automatically by kmod)
-   $ modprobe dvb-bt8xx (or just place dvb-bt8xx in /etc/modules for automatic loading)
+   $ modprobe bttv i2c_hw=1 card=0x68
+   $ modprobe dvb-bt8xx
+
+For Nebula cards use the "nxt6000" frontend driver:
+   $ modprobe nxt6000
 
+For Pinnacle PCTV cards use the "cx24110" frontend driver:
+   $ modprobe cx24110
 
-3b) TwinHan and Clones
---------------------------
+3b) TwinHan
+-----------
 
    $ modprobe bttv i2c_hw=1 card=0x71
    $ modprobe dvb-bt8xx
    $ modprobe dst
 
-The value 0x71 will override the PCI type detection for dvb-bt8xx,
-which  is necessary for TwinHan cards.
+The value 0x71 will override the PCI type detection for dvb-bt8xx, which 
+is necessary for TwinHan cards.#
 
-If you're having an older card (blue color circuit) and card=0x71 locks
-your machine, try using 0x68, too. If that does not work, ask on the
-mailing list.
+If you're having an older card (blue color circuit) and card=0x71 locks your
+machine, try using 0x68, too. If that does not work, ask on the DVB mailing list.
 
-The DST module takes a couple of useful parameters.
+The DST module takes a couple of useful parameters, in case the
+dst drivers fails to detect your type of card correctly.
 
-verbose takes values 0 to 5. These values control the verbosity level.
+dst_type takes values 0 (satellite), 1 (terrestial TV), 2 (cable).
 
-debug takes values 0 and 1. You can either disable or enable debugging.
+dst_type_flags takes bit combined values:
+1 = new tuner type packets. You can use this if your card is detected
+    and you have debug and you continually see the tuner packets not
+    working (make sure not a basic problem like dish alignment etc.)
 
-dst_addons takes values 0 and 0x20. A value of 0 means it is a FTA card.
-0x20 means it has a Conditional Access slot.
+2 = TS 204. If your card tunes OK, but the picture is terrible, seemingly
+    breaking up in one half continually, and crc fails a lot, then
+    this is worth a try (or trying to turn off)
 
-The autodected values are determined bythe cards 'response
+4 = has symdiv. Some cards, mostly without new tuner packets, require
+    a symbol division algorithm. Doesn't apply to terrestial TV.
+
+You can also specify a value to have the autodetected values turned off
+(e.g. 0). The autodected values are determined bythe cards 'response
 string' which you can see in your logs e.g.
 
-dst_get_device_id: Recognise [DSTMCI]
+dst_check_ci: recognize DST-MOT
+
+or 
 
+dst_check_ci: unable to recognize DSTXCI or STXCI
 
 --
-Authors: Richard Walker, Jamie Honan, Michael Hunold, Manu Abraham
+Authors: Richard Walker, Jamie Honan, Michael Hunold