Merge remote-tracking branch 'origin/x86/espfix' into x86/vdso

Merge x86/espfix into x86/vdso, due to changes in the vdso setup code
that otherwise cause conflicts.

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>

Documentation/devicetree/bindings/clock/at91-clock.txt

@@ -62,7 +62,7 @@ Required properties for PMC node:
 - interrupt-controller : tell that the PMC is an interrupt controller.
 - #interrupt-cells : must be set to 1. The first cell encodes the interrupt id,
 	and reflect the bit position in the PMC_ER/DR/SR registers.
-	You can use the dt macros defined in dt-bindings/clk/at91.h.
+	You can use the dt macros defined in dt-bindings/clock/at91.h.
 	0 (AT91_PMC_MOSCS) -> main oscillator ready
 	1 (AT91_PMC_LOCKA) -> PLL A ready
 	2 (AT91_PMC_LOCKB) -> PLL B ready

Documentation/devicetree/bindings/dma/ti-edma.txt

@@ -29,6 +29,6 @@ edma: edma@49000000 {
 	dma-channels = <64>;
 	ti,edma-regions = <4>;
 	ti,edma-slots = <256>;
-	ti,edma-xbar-event-map = <1 12
-				  2 13>;
+	ti,edma-xbar-event-map = /bits/ 16 <1 12
+					    2 13>;
 };

Documentation/devicetree/bindings/net/arc_emac.txt

@@ -4,11 +4,15 @@ Required properties:
 - compatible: Should be "snps,arc-emac"
 - reg: Address and length of the register set for the device
 - interrupts: Should contain the EMAC interrupts
-- clock-frequency: CPU frequency. It is needed to calculate and set polling
-period of EMAC.
 - max-speed: see ethernet.txt file in the same directory.
 - phy: see ethernet.txt file in the same directory.
 
+Clock handling:
+The clock frequency is needed to calculate and set polling period of EMAC.
+It must be provided by one of:
+- clock-frequency: CPU frequency.
+- clocks: reference to the clock supplying the EMAC.
+
 Child nodes of the driver are the individual PHY devices connected to the
 MDIO bus. They must have a "reg" property given the PHY address on the MDIO bus.
 
@@ -19,7 +23,11 @@ Examples:
 		reg = <0xc0fc2000 0x3c>;
 		interrupts = <6>;
 		mac-address = [ 00 11 22 33 44 55 ];
+
 		clock-frequency = <80000000>;
+		/* or */
+		clocks = <&emac_clock>;
+
 		max-speed = <100>;
 		phy = <&phy0>;
 

Documentation/input/elantech.txt

@@ -504,9 +504,12 @@ byte 5:
 * reg_10
 
    bit   7   6   5   4   3   2   1   0
-         0   0   0   0   0   0   0   A
+         0   0   0   0   R   F   T   A
 
          A: 1 = enable absolute tracking
+         T: 1 = enable two finger mode auto correct
+         F: 1 = disable ABS Position Filter
+         R: 1 = enable real hardware resolution
 
 6.2 Native absolute mode 6 byte packet format
     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Documentation/kernel-parameters.txt

@@ -2218,10 +2218,10 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 	noreplace-smp	[X86-32,SMP] Don't replace SMP instructions
 			with UP alternatives
 
-	nordrand	[X86] Disable the direct use of the RDRAND
-			instruction even if it is supported by the
-			processor.  RDRAND is still available to user
-			space applications.
+	nordrand	[X86] Disable kernel use of the RDRAND and
+			RDSEED instructions even if they are supported
+			by the processor.  RDRAND and RDSEED are still
+			available to user space applications.
 
 	noresume	[SWSUSP] Disables resume and restores original swap
 			space.

Documentation/networking/scaling.txt

@@ -429,7 +429,7 @@ RPS and RFS were introduced in kernel 2.6.35. XPS was incorporated into
 (therbert@google.com)
 
 Accelerated RFS was introduced in 2.6.35. Original patches were
-submitted by Ben Hutchings (bhutchings@solarflare.com)
+submitted by Ben Hutchings (bwh@kernel.org)
 
 Authors:
 Tom Herbert (therbert@google.com)

Documentation/x86/x86_64/mm.txt

@@ -12,6 +12,8 @@ ffffc90000000000 - ffffe8ffffffffff (=45 bits) vmalloc/ioremap space
 ffffe90000000000 - ffffe9ffffffffff (=40 bits) hole
 ffffea0000000000 - ffffeaffffffffff (=40 bits) virtual memory map (1TB)
 ... unused hole ...
+ffffff0000000000 - ffffff7fffffffff (=39 bits) %esp fixup stacks
+... unused hole ...
 ffffffff80000000 - ffffffffa0000000 (=512 MB)  kernel text mapping, from phys 0
 ffffffffa0000000 - ffffffffff5fffff (=1525 MB) module mapping space
 ffffffffff600000 - ffffffffffdfffff (=8 MB) vsyscalls

MAINTAINERS

@@ -1893,14 +1893,15 @@ L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/ethernet/broadcom/bnx2x/
 
-BROADCOM BCM281XX/BCM11XXX ARM ARCHITECTURE
+BROADCOM BCM281XX/BCM11XXX/BCM216XX ARM ARCHITECTURE
 M:	Christian Daudt <bcm@fixthebug.org>
 M:	Matt Porter <mporter@linaro.org>
 L:	bcm-kernel-feedback-list@broadcom.com
-T:	git git://git.github.com/broadcom/bcm11351
+T:	git git://github.com/broadcom/mach-bcm
 S:	Maintained
 F:	arch/arm/mach-bcm/
 F:	arch/arm/boot/dts/bcm113*
+F:	arch/arm/boot/dts/bcm216*
 F:	arch/arm/boot/dts/bcm281*
 F:	arch/arm/configs/bcm_defconfig
 F:	drivers/mmc/host/sdhci_bcm_kona.c
@@ -4818,6 +4819,14 @@ L:	linux-kernel@vger.kernel.org
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git irq/core
 F:	kernel/irq/
+
+IRQCHIP DRIVERS
+M:	Thomas Gleixner <tglx@linutronix.de>
+M:	Jason Cooper <jason@lakedaemon.net>
+L:	linux-kernel@vger.kernel.org
+S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git irq/core
+T:	git git://git.infradead.org/users/jcooper/linux.git irqchip/core
 F:	drivers/irqchip/
 
 IRQ DOMAINS (IRQ NUMBER MAPPING LIBRARY)
@@ -5490,15 +5499,15 @@ F:	Documentation/hwmon/ltc4261
 F:	drivers/hwmon/ltc4261.c
 
 LTP (Linux Test Project)
-M:	Shubham Goyal <shubham@linux.vnet.ibm.com>
 M:	Mike Frysinger <vapier@gentoo.org>
 M:	Cyril Hrubis <chrubis@suse.cz>
-M:	Caspar Zhang <caspar@casparzhang.com>
 M:	Wanlong Gao <gaowanlong@cn.fujitsu.com>
+M:	Jan Stancek <jstancek@redhat.com>
+M:	Stanislav Kholmanskikh <stanislav.kholmanskikh@oracle.com>
+M:	Alexey Kodanev <alexey.kodanev@oracle.com>
 L:	ltp-list@lists.sourceforge.net (subscribers-only)
-W:	http://ltp.sourceforge.net/
+W:	http://linux-test-project.github.io/
 T:	git git://github.com/linux-test-project/ltp.git
-T:	git git://ltp.git.sourceforge.net/gitroot/ltp/ltp-dev
 S:	Maintained
 
 M32R ARCHITECTURE
@@ -7288,7 +7297,6 @@ F:	drivers/video/aty/aty128fb.c
 RALINK RT2X00 WIRELESS LAN DRIVER
 P:	rt2x00 project
 M:	Ivo van Doorn <IvDoorn@gmail.com>
-M:	Gertjan van Wingerde <gwingerde@gmail.com>
 M:	Helmut Schaa <helmut.schaa@googlemail.com>
 L:	linux-wireless@vger.kernel.org
 L:	users@rt2x00.serialmonkey.com (moderated for non-subscribers)
@@ -7304,7 +7312,7 @@ F:	Documentation/blockdev/ramdisk.txt
 F:	drivers/block/brd.c
 
 RANDOM NUMBER DRIVER
-M:	Theodore Ts'o" <tytso@mit.edu>
+M:	"Theodore Ts'o" <tytso@mit.edu>
 S:	Maintained
 F:	drivers/char/random.c
 
@@ -7685,7 +7693,6 @@ F:	drivers/clk/samsung/
 SAMSUNG SXGBE DRIVERS
 M:	Byungho An <bh74.an@samsung.com>
 M:	Girish K S <ks.giri@samsung.com>
-M:	Siva Reddy Kallam <siva.kallam@samsung.com>
 M:	Vipul Pandya <vipul.pandya@samsung.com>
 S:	Supported
 L:	netdev@vger.kernel.org
@@ -9962,7 +9969,7 @@ F:	drivers/net/hamradio/*scc.c
 F:	drivers/net/hamradio/z8530.h
 
 ZBUD COMPRESSED PAGE ALLOCATOR
-M:	Seth Jennings <sjenning@linux.vnet.ibm.com>
+M:	Seth Jennings <sjennings@variantweb.net>
 L:	linux-mm@kvack.org
 S:	Maintained
 F:	mm/zbud.c
@@ -10007,7 +10014,7 @@ F:	mm/zsmalloc.c
 F:	include/linux/zsmalloc.h
 
 ZSWAP COMPRESSED SWAP CACHING
-M:	Seth Jennings <sjenning@linux.vnet.ibm.com>
+M:	Seth Jennings <sjennings@variantweb.net>
 L:	linux-mm@kvack.org
 S:	Maintained
 F:	mm/zswap.c

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 15
 SUBLEVEL = 0
-EXTRAVERSION = -rc4
+EXTRAVERSION = -rc5
 NAME = Shuffling Zombie Juror
 
 # *DOCUMENTATION*

arch/arm/boot/dts/am33xx.dtsi

@@ -144,7 +144,7 @@
 			compatible = "ti,edma3";
 			ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
 			reg =	<0x49000000 0x10000>,
-				<0x44e10f90 0x10>;
+				<0x44e10f90 0x40>;
 			interrupts = <12 13 14>;
 			#dma-cells = <1>;
 			dma-channels = <64>;

arch/arm/boot/dts/am3517.dtsi

@@ -62,5 +62,21 @@
 	};
 };
 
+&iva {
+	status = "disabled";
+};
+
+&mailbox {
+	status = "disabled";
+};
+
+&mmu_isp {
+	status = "disabled";
+};
+
+&smartreflex_mpu_iva {
+	status = "disabled";
+};
+
 /include/ "am35xx-clocks.dtsi"
 /include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"

arch/arm/boot/dts/am437x-gp-evm.dts

@@ -117,6 +117,11 @@
 	status = "okay";
 };
 
+&gpio5 {
+	status = "okay";
+	ti,no-reset-on-init;
+};
+
 &mmc1 {
 	status = "okay";
 	vmmc-supply = <&vmmcsd_fixed>;

arch/arm/boot/dts/armada-370-db.dts

@@ -67,6 +67,7 @@
 			i2c@11000 {
 				pinctrl-0 = <&i2c0_pins>;
 				pinctrl-names = "default";
+				clock-frequency = <100000>;
 				status = "okay";
 				audio_codec: audio-codec@4a {
 					compatible = "cirrus,cs42l51";

arch/arm/boot/dts/armada-375-db.dts

@@ -79,6 +79,11 @@
 				};
 			};
 
+			sata@a0000 {
+				status = "okay";
+				nr-ports = <2>;
+			};
+
 			nand: nand@d0000 {
 				pinctrl-0 = <&nand_pins>;
 				pinctrl-names = "default";

arch/arm/boot/dts/armada-xp-db.dts

@@ -49,7 +49,7 @@
 			/* Device Bus parameters are required */
 
 			/* Read parameters */
-			devbus,bus-width    = <8>;
+			devbus,bus-width    = <16>;
 			devbus,turn-off-ps  = <60000>;
 			devbus,badr-skew-ps = <0>;
 			devbus,acc-first-ps = <124000>;

arch/arm/boot/dts/armada-xp-gp.dts

@@ -59,7 +59,7 @@
 			/* Device Bus parameters are required */
 
 			/* Read parameters */
-			devbus,bus-width    = <8>;
+			devbus,bus-width    = <16>;
 			devbus,turn-off-ps  = <60000>;
 			devbus,badr-skew-ps = <0>;
 			devbus,acc-first-ps = <124000>;
@@ -146,22 +146,22 @@
 			ethernet@70000 {
 				status = "okay";
 				phy = <&phy0>;
-				phy-mode = "rgmii-id";
+				phy-mode = "qsgmii";
 			};
 			ethernet@74000 {
 				status = "okay";
 				phy = <&phy1>;
-				phy-mode = "rgmii-id";
+				phy-mode = "qsgmii";
 			};
 			ethernet@30000 {
 				status = "okay";
 				phy = <&phy2>;
-				phy-mode = "rgmii-id";
+				phy-mode = "qsgmii";
 			};
 			ethernet@34000 {
 				status = "okay";
 				phy = <&phy3>;
-				phy-mode = "rgmii-id";
+				phy-mode = "qsgmii";
 			};
 
 			/* Front-side USB slot */

arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts

@@ -39,7 +39,7 @@
 			/* Device Bus parameters are required */
 
 			/* Read parameters */
-			devbus,bus-width    = <8>;
+			devbus,bus-width    = <16>;
 			devbus,turn-off-ps  = <60000>;
 			devbus,badr-skew-ps = <0>;
 			devbus,acc-first-ps = <124000>;

arch/arm/boot/dts/at91-sama5d3_xplained.dts

@@ -34,7 +34,7 @@
 			};
 
 			spi0: spi@f0004000 {
-				cs-gpios = <&pioD 13 0>;
+				cs-gpios = <&pioD 13 0>, <0>, <0>, <&pioD 16 0>;
 				status = "okay";
 			};
 
@@ -79,7 +79,7 @@
 			};
 
 			spi1: spi@f8008000 {
-				cs-gpios = <&pioC 25 0>, <0>, <0>, <&pioD 16 0>;
+				cs-gpios = <&pioC 25 0>;
 				status = "okay";
 			};
 

arch/arm/boot/dts/at91sam9261.dtsi

@@ -10,7 +10,7 @@
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clk/at91.h>
+#include <dt-bindings/clock/at91.h>
 
 / {
 	model = "Atmel AT91SAM9261 family SoC";

arch/arm/boot/dts/at91sam9rl.dtsi

@@ -8,7 +8,7 @@
 
 #include "skeleton.dtsi"
 #include <dt-bindings/pinctrl/at91.h>
-#include <dt-bindings/clk/at91.h>
+#include <dt-bindings/clock/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 

arch/arm/boot/dts/imx53.dtsi

@@ -115,7 +115,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "fsl,imx53-ipu";
-			reg = <0x18000000 0x080000000>;
+			reg = <0x18000000 0x08000000>;
 			interrupts = <11 10>;
 			clocks = <&clks IMX5_CLK_IPU_GATE>,
 			         <&clks IMX5_CLK_IPU_DI0_GATE>,

arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts

@@ -30,6 +30,16 @@
 		bootargs = "console=ttyS0,115200n8 earlyprintk";
 	};
 
+	mbus {
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+        };
+
 	ocp@f1000000 {
 		pinctrl@10000 {
 			pmx_usb_led: pmx-usb-led {
@@ -73,14 +83,6 @@
 		ehci@50000 {
 			status = "okay";
 		};
-
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
 	};
 
 	gpio-leds {