---

yaml
---
r: 309562
b: refs/heads/master
c: 67e7ebc
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: c533f32e1ac440b8840159f89ece8c9cca2422b5
+refs/heads/master: 67e7ebc21ff5a5bbcb10c9a980896f0e253bcd40

trunk/Documentation/devicetree/bindings/arm/samsung/interrupt-combiner.txt

@@ -0,0 +1,52 @@
+* Samsung Exynos Interrupt Combiner Controller
+
+Samsung's Exynos4 architecture includes a interrupt combiner controller which
+can combine interrupt sources as a group and provide a single interrupt request
+for the group. The interrupt request from each group are connected to a parent
+interrupt controller, such as GIC in case of Exynos4210.
+
+The interrupt combiner controller consists of multiple combiners. Upto eight
+interrupt sources can be connected to a combiner. The combiner outputs one
+combined interrupt for its eight interrupt sources. The combined interrupt
+is usually connected to a parent interrupt controller.
+
+A single node in the device tree is used to describe the interrupt combiner
+controller module (which includes multiple combiners). A combiner in the
+interrupt controller module shares config/control registers with other
+combiners. For example, a 32-bit interrupt enable/disable config register
+can accommodate upto 4 interrupt combiners (with each combiner supporting
+upto 8 interrupt sources).
+
+Required properties:
+- compatible: should be "samsung,exynos4210-combiner".
+- interrupt-controller: Identifies the node as an interrupt controller.
+- #interrupt-cells: should be <2>. The meaning of the cells are
+	* First Cell: Combiner Group Number.
+	* Second Cell: Interrupt number within the group.
+- reg: Base address and size of interrupt combiner registers.
+- interrupts: The list of interrupts generated by the combiners which are then
+    connected to a parent interrupt controller. The format of the interrupt
+    specifier depends in the interrupt parent controller.
+
+Optional properties:
+- samsung,combiner-nr: The number of interrupt combiners supported. If this
+  property is not specified, the default number of combiners is assumed
+  to be 16.
+- interrupt-parent: pHandle of the parent interrupt controller, if not
+  inherited from the parent node.
+
+
+Example:
+
+	The following is a an example from the Exynos4210 SoC dtsi file.
+
+	combiner:interrupt-controller@10440000 {
+		compatible = "samsung,exynos4210-combiner";
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		reg = <0x10440000 0x1000>;
+		interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
+			     <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
+			     <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
+			     <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>;
+	};

trunk/arch/arm/Kconfig

@@ -1088,7 +1088,6 @@ source "arch/arm/mach-sa1100/Kconfig"
 
 source "arch/arm/plat-samsung/Kconfig"
 source "arch/arm/plat-s3c24xx/Kconfig"
-source "arch/arm/plat-s5p/Kconfig"
 
 source "arch/arm/plat-spear/Kconfig"
 

trunk/arch/arm/Makefile

@@ -209,7 +209,7 @@ plat-$(CONFIG_PLAT_NOMADIK)	:= nomadik
 plat-$(CONFIG_PLAT_ORION)	:= orion
 plat-$(CONFIG_PLAT_PXA)		:= pxa
 plat-$(CONFIG_PLAT_S3C24XX)	:= s3c24xx samsung
-plat-$(CONFIG_PLAT_S5P)		:= s5p samsung
+plat-$(CONFIG_PLAT_S5P)		:= samsung
 plat-$(CONFIG_PLAT_SPEAR)	:= spear
 plat-$(CONFIG_PLAT_VERSATILE)	:= versatile
 

trunk/arch/arm/boot/dts/exynos5250-smdk5250.dts

@@ -23,4 +23,52 @@
 	chosen {
 		bootargs = "root=/dev/ram0 rw ramdisk=8192 console=ttySAC1,115200";
 	};
+
+	i2c@12C60000 {
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-max-bus-freq = <20000>;
+		gpios = <&gpb3 0 2 3 0>,
+			<&gpb3 1 2 3 0>;
+
+		eeprom@50 {
+			compatible = "samsung,s524ad0xd1";
+			reg = <0x50>;
+		};
+	};
+
+	i2c@12C70000 {
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-max-bus-freq = <20000>;
+		gpios = <&gpb3 2 2 3 0>,
+			<&gpb3 3 2 3 0>;
+
+		eeprom@51 {
+			compatible = "samsung,s524ad0xd1";
+			reg = <0x51>;
+		};
+	};
+
+	i2c@12C80000 {
+		status = "disabled";
+	};
+
+	i2c@12C90000 {
+		status = "disabled";
+	};
+
+	i2c@12CA0000 {
+		status = "disabled";
+	};
+
+	i2c@12CB0000 {
+		status = "disabled";
+	};
+
+	i2c@12CC0000 {
+		status = "disabled";
+	};
+
+	i2c@12CD0000 {
+		status = "disabled";
+	};
 };

trunk/arch/arm/boot/dts/exynos5250.dtsi

@@ -23,11 +23,27 @@
 	compatible = "samsung,exynos5250";
 	interrupt-parent = <&gic>;
 
-	gic:interrupt-controller@10490000 {
+	gic:interrupt-controller@10481000 {
 		compatible = "arm,cortex-a9-gic";
 		#interrupt-cells = <3>;
 		interrupt-controller;
-		reg = <0x10490000 0x1000>, <0x10480000 0x100>;
+		reg = <0x10481000 0x1000>, <0x10482000 0x2000>;
+	};
+
+	combiner:interrupt-controller@10440000 {
+		compatible = "samsung,exynos4210-combiner";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		samsung,combiner-nr = <32>;
+		reg = <0x10440000 0x1000>;
+		interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
+			     <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
+			     <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
+			     <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
+			     <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
+			     <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>,
+			     <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
+			     <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
 	};
 
 	watchdog {
@@ -42,30 +58,6 @@
 		interrupts = <0 43 0>, <0 44 0>;
 	};
 
-	sdhci@12200000 {
-		compatible = "samsung,exynos4210-sdhci";
-		reg = <0x12200000 0x100>;
-		interrupts = <0 75 0>;
-	};
-
-	sdhci@12210000 {
-		compatible = "samsung,exynos4210-sdhci";
-		reg = <0x12210000 0x100>;
-		interrupts = <0 76 0>;
-	};
-
-	sdhci@12220000 {
-		compatible = "samsung,exynos4210-sdhci";
-		reg = <0x12220000 0x100>;
-		interrupts = <0 77 0>;
-	};
-
-	sdhci@12230000 {
-		compatible = "samsung,exynos4210-sdhci";
-		reg = <0x12230000 0x100>;
-		interrupts = <0 78 0>;
-	};
-
 	serial@12C00000 {
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x12C00000 0x100>;
@@ -94,48 +86,64 @@
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x12C60000 0x100>;
 		interrupts = <0 56 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 	};
 
 	i2c@12C70000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x12C70000 0x100>;
 		interrupts = <0 57 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 	};
 
 	i2c@12C80000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x12C80000 0x100>;
 		interrupts = <0 58 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 	};
 
 	i2c@12C90000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x12C90000 0x100>;
 		interrupts = <0 59 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 	};
 
 	i2c@12CA0000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x12CA0000 0x100>;
 		interrupts = <0 60 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 	};
 
 	i2c@12CB0000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x12CB0000 0x100>;
 		interrupts = <0 61 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 	};
 
 	i2c@12CC0000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x12CC0000 0x100>;
 		interrupts = <0 62 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 	};
 
 	i2c@12CD0000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x12CD0000 0x100>;
 		interrupts = <0 63 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 	};
 
 	amba {
@@ -157,13 +165,13 @@
 			interrupts = <0 35 0>;
 		};
 
-		mdma0: pdma@10800000 {
+		mdma0: mdma@10800000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x10800000 0x1000>;
 			interrupts = <0 33 0>;
 		};
 
-		mdma1: pdma@11C10000 {
+		mdma1: mdma@11C10000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x11C10000 0x1000>;
 			interrupts = <0 124 0>;
@@ -242,6 +250,12 @@
 			#gpio-cells = <4>;
 		};
 
+		gpc4: gpio-controller@114002E0 {
+			compatible = "samsung,exynos4-gpio";
+			reg = <0x114002E0 0x20>;
+			#gpio-cells = <4>;
+		};
+
 		gpd0: gpio-controller@11400160 {
 			compatible = "samsung,exynos4-gpio";
 			reg = <0x11400160 0x20>;
@@ -388,19 +402,19 @@
 
 		gpv2: gpio-controller@10D10040 {
 			compatible = "samsung,exynos4-gpio";
-			reg = <0x10D10040 0x20>;
+			reg = <0x10D10060 0x20>;
 			#gpio-cells = <4>;
 		};
 
 		gpv3: gpio-controller@10D10060 {
 			compatible = "samsung,exynos4-gpio";
-			reg = <0x10D10060 0x20>;
+			reg = <0x10D10080 0x20>;
 			#gpio-cells = <4>;
 		};
 
 		gpv4: gpio-controller@10D10080 {
 			compatible = "samsung,exynos4-gpio";
-			reg = <0x10D10080 0x20>;
+			reg = <0x10D100C0 0x20>;
 			#gpio-cells = <4>;
 		};