---

yaml
---
r: 215567
b: refs/heads/master
c: 0228db7
h: refs/heads/master
i:
  215565: df3d85e
  215563: 94900d8
  215559: b95bce7
  215551: ffc880f
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 2c6118e43040034d80894daeba41960bf0035b31
+refs/heads/master: 0228db70ce6afdcd14164ab8d18137fa319c76e8

trunk/Documentation/DocBook/device-drivers.tmpl

@@ -46,6 +46,7 @@
 
      <sect1><title>Atomic and pointer manipulation</title>
 !Iarch/x86/include/asm/atomic.h
+!Iarch/x86/include/asm/unaligned.h
      </sect1>
 
      <sect1><title>Delaying, scheduling, and timer routines</title>

trunk/Documentation/DocBook/kernel-api.tmpl

@@ -57,6 +57,7 @@
      </para>
 
      <sect1><title>String Conversions</title>
+!Ilib/vsprintf.c
 !Elib/vsprintf.c
      </sect1>
      <sect1><title>String Manipulation</title>

trunk/Documentation/DocBook/kernel-locking.tmpl

@@ -1922,12 +1922,9 @@ machines due to caching.
       <function>mutex_lock()</function>
       </para>
       <para>
-       There is a <function>mutex_trylock()</function> which does not
-       sleep.  Still, it must not be used inside interrupt context since
-       its implementation is not safe for that.
+       There is a <function>mutex_trylock()</function> which can be
+       used inside interrupt context, as it will not sleep.
        <function>mutex_unlock()</function> will also never sleep.
-       It cannot be used in interrupt context either since a mutex
-       must be released by the same task that acquired it.
       </para>
      </listitem>
     </itemizedlist>
@@ -1961,12 +1958,6 @@ machines due to caching.
    </sect1>
   </chapter>
 
-  <chapter id="apiref">
-   <title>Mutex API reference</title>
-!Iinclude/linux/mutex.h
-!Ekernel/mutex.c
-  </chapter>
-
   <chapter id="references">
    <title>Further reading</title>
 

trunk/Documentation/DocBook/tracepoint.tmpl

@@ -104,9 +104,4 @@
    <title>Block IO</title>
 !Iinclude/trace/events/block.h
   </chapter>
-
-  <chapter id="workqueue">
-   <title>Workqueue</title>
-!Iinclude/trace/events/workqueue.h
-  </chapter>
 </book>

trunk/Documentation/cgroups/blkio-controller.txt

@@ -217,7 +217,6 @@ Details of cgroup files
 CFQ sysfs tunable
 =================
 /sys/block/<disk>/queue/iosched/group_isolation
------------------------------------------------
 
 If group_isolation=1, it provides stronger isolation between groups at the
 expense of throughput. By default group_isolation is 0. In general that
@@ -244,33 +243,6 @@ By default one should run with group_isolation=0. If that is not sufficient
 and one wants stronger isolation between groups, then set group_isolation=1
 but this will come at cost of reduced throughput.
 
-/sys/block/<disk>/queue/iosched/slice_idle
-------------------------------------------
-On a faster hardware CFQ can be slow, especially with sequential workload.
-This happens because CFQ idles on a single queue and single queue might not
-drive deeper request queue depths to keep the storage busy. In such scenarios
-one can try setting slice_idle=0 and that would switch CFQ to IOPS
-(IO operations per second) mode on NCQ supporting hardware.
-
-That means CFQ will not idle between cfq queues of a cfq group and hence be
-able to driver higher queue depth and achieve better throughput. That also
-means that cfq provides fairness among groups in terms of IOPS and not in
-terms of disk time.
-
-/sys/block/<disk>/queue/iosched/group_idle
-------------------------------------------
-If one disables idling on individual cfq queues and cfq service trees by
-setting slice_idle=0, group_idle kicks in. That means CFQ will still idle
-on the group in an attempt to provide fairness among groups.
-
-By default group_idle is same as slice_idle and does not do anything if
-slice_idle is enabled.
-
-One can experience an overall throughput drop if you have created multiple
-groups and put applications in that group which are not driving enough
-IO to keep disk busy. In that case set group_idle=0, and CFQ will not idle
-on individual groups and throughput should improve.
-
 What works
 ==========
 - Currently only sync IO queues are support. All the buffered writes are

trunk/Documentation/gpio.txt

@@ -109,19 +109,17 @@ use numbers 2000-2063 to identify GPIOs in a bank of I2C GPIO expanders.
 
 If you want to initialize a structure with an invalid GPIO number, use
 some negative number (perhaps "-EINVAL"); that will never be valid.  To
-test if such number from such a structure could reference a GPIO, you
-may use this predicate:
+test if a number could reference a GPIO, you may use this predicate:
 
 	int gpio_is_valid(int number);
 
 A number that's not valid will be rejected by calls which may request
 or free GPIOs (see below).  Other numbers may also be rejected; for
-example, a number might be valid but temporarily unused on a given board.
+example, a number might be valid but unused on a given board.
+
+Whether a platform supports multiple GPIO controllers is currently a
+platform-specific implementation issue.
 
-Whether a platform supports multiple GPIO controllers is a platform-specific
-implementation issue, as are whether that support can leave "holes" in the space
-of GPIO numbers, and whether new controllers can be added at runtime.  Such issues
-can affect things including whether adjacent GPIO numbers are both valid.
 
 Using GPIOs
 -----------
@@ -482,16 +480,12 @@ To support this framework, a platform's Kconfig will "select" either
 ARCH_REQUIRE_GPIOLIB or ARCH_WANT_OPTIONAL_GPIOLIB
 and arrange that its <asm/gpio.h> includes <asm-generic/gpio.h> and defines
 three functions: gpio_get_value(), gpio_set_value(), and gpio_cansleep().
+They may also want to provide a custom value for ARCH_NR_GPIOS.
 
-It may also provide a custom value for ARCH_NR_GPIOS, so that it better
-reflects the number of GPIOs in actual use on that platform, without
-wasting static table space.  (It should count both built-in/SoC GPIOs and
-also ones on GPIO expanders.
-
-ARCH_REQUIRE_GPIOLIB means that the gpiolib code will always get compiled
+ARCH_REQUIRE_GPIOLIB means that the gpio-lib code will always get compiled
 into the kernel on that architecture.
 
-ARCH_WANT_OPTIONAL_GPIOLIB means the gpiolib code defaults to off and the user
+ARCH_WANT_OPTIONAL_GPIOLIB means the gpio-lib code defaults to off and the user
 can enable it and build it into the kernel optionally.
 
 If neither of these options are selected, the platform does not support

trunk/Documentation/hwmon/f71882fg

@@ -2,6 +2,10 @@ Kernel driver f71882fg
 ======================
 
 Supported chips:
+  * Fintek F71808E
+    Prefix: 'f71808fg'
+    Addresses scanned: none, address read from Super I/O config space
+    Datasheet: Not public
   * Fintek F71858FG
     Prefix: 'f71858fg'
     Addresses scanned: none, address read from Super I/O config space

trunk/Documentation/kernel-doc-nano-HOWTO.txt

@@ -345,10 +345,5 @@ documentation, in <filename>, for the functions listed.
 section titled <section title> from <filename>.
 Spaces are allowed in <section title>; do not quote the <section title>.
 
-!C<filename> is replaced by nothing, but makes the tools check that
-all DOC: sections and documented functions, symbols, etc. are used.
-This makes sense to use when you use !F/!P only and want to verify
-that all documentation is included.
-
 Tim.
 */ <twaugh@redhat.com>

trunk/Documentation/kernel-parameters.txt

@@ -1974,18 +1974,15 @@ and is between 256 and 4096 characters. It is defined in the file
 		force	Enable ASPM even on devices that claim not to support it.
 			WARNING: Forcing ASPM on may cause system lockups.
 
-	pcie_ports=	[PCIE] PCIe ports handling:
-		auto	Ask the BIOS whether or not to use native PCIe services
-			associated with PCIe ports (PME, hot-plug, AER).  Use
-			them only if that is allowed by the BIOS.
-		native	Use native PCIe services associated with PCIe ports
-			unconditionally.
-		compat	Treat PCIe ports as PCI-to-PCI bridges, disable the PCIe
-			ports driver.
-
 	pcie_pme=	[PCIE,PM] Native PCIe PME signaling options:
+			Format: {auto|force}[,nomsi]
+		auto	Use native PCIe PME signaling if the BIOS allows the
+			kernel to control PCIe config registers of root ports.
+		force	Use native PCIe PME signaling even if the BIOS refuses
+			to allow the kernel to control the relevant PCIe config
+			registers.
 		nomsi	Do not use MSI for native PCIe PME signaling (this makes
-			all PCIe root ports use INTx for all services).
+			all PCIe root ports use INTx for everything).
 
 	pcmv=		[HW,PCMCIA] BadgePAD 4
 
@@ -2632,10 +2629,8 @@ and is between 256 and 4096 characters. It is defined in the file
 			aux-ide-disks -- unplug non-primary-master IDE devices
 			nics -- unplug network devices
 			all -- unplug all emulated devices (NICs and IDE disks)
-			unnecessary -- unplugging emulated devices is
-				unnecessary even if the host did not respond to
-				the unplug protocol
-			never -- do not unplug even if version check succeeds
+			ignore -- continue loading the Xen platform PCI driver even
+				if the version check failed
 
 	xirc2ps_cs=	[NET,PCMCIA]
 			Format:

trunk/Documentation/lguest/Makefile

@@ -1,6 +1,5 @@
 # This creates the demonstration utility "lguest" which runs a Linux guest.
-# Missing headers?  Add "-I../../include -I../../arch/x86/include"
-CFLAGS:=-m32 -Wall -Wmissing-declarations -Wmissing-prototypes -O3 -U_FORTIFY_SOURCE
+CFLAGS:=-m32 -Wall -Wmissing-declarations -Wmissing-prototypes -O3 -I../../include -I../../arch/x86/include -U_FORTIFY_SOURCE
 
 all: lguest
 

trunk/Documentation/lguest/lguest.c

@@ -39,14 +39,14 @@
 #include <limits.h>
 #include <stddef.h>
 #include <signal.h>
-#include <linux/virtio_config.h>
-#include <linux/virtio_net.h>
-#include <linux/virtio_blk.h>
-#include <linux/virtio_console.h>
-#include <linux/virtio_rng.h>
-#include <linux/virtio_ring.h>
-#include <asm/bootparam.h>
-#include "../../include/linux/lguest_launcher.h"
+#include "linux/lguest_launcher.h"
+#include "linux/virtio_config.h"
+#include "linux/virtio_net.h"
+#include "linux/virtio_blk.h"
+#include "linux/virtio_console.h"
+#include "linux/virtio_rng.h"
+#include "linux/virtio_ring.h"
+#include "asm/bootparam.h"
 /*L:110
  * We can ignore the 42 include files we need for this program, but I do want
  * to draw attention to the use of kernel-style types.
@@ -1447,15 +1447,14 @@ static void add_to_bridge(int fd, const char *if_name, const char *br_name)
 static void configure_device(int fd, const char *tapif, u32 ipaddr)
 {
 	struct ifreq ifr;
-	struct sockaddr_in sin;
+	struct sockaddr_in *sin = (struct sockaddr_in *)&ifr.ifr_addr;
 
 	memset(&ifr, 0, sizeof(ifr));
 	strcpy(ifr.ifr_name, tapif);
 
 	/* Don't read these incantations.  Just cut & paste them like I did! */
-	sin.sin_family = AF_INET;
-	sin.sin_addr.s_addr = htonl(ipaddr);
-	memcpy(&ifr.ifr_addr, &sin, sizeof(sin));
+	sin->sin_family = AF_INET;
+	sin->sin_addr.s_addr = htonl(ipaddr);
 	if (ioctl(fd, SIOCSIFADDR, &ifr) != 0)
 		err(1, "Setting %s interface address", tapif);
 	ifr.ifr_flags = IFF_UP;

trunk/Documentation/mutex-design.txt

@@ -9,7 +9,7 @@ firstly, there's nothing wrong with semaphores. But if the simpler
 mutex semantics are sufficient for your code, then there are a couple
 of advantages of mutexes:
 
- - 'struct mutex' is smaller on most architectures: E.g. on x86,
+ - 'struct mutex' is smaller on most architectures: .e.g on x86,
    'struct semaphore' is 20 bytes, 'struct mutex' is 16 bytes.
    A smaller structure size means less RAM footprint, and better
    CPU-cache utilization.
@@ -136,4 +136,3 @@ the APIs of 'struct mutex' have been streamlined:
  void mutex_lock_nested(struct mutex *lock, unsigned int subclass);
  int  mutex_lock_interruptible_nested(struct mutex *lock,
                                       unsigned int subclass);
- int atomic_dec_and_mutex_lock(atomic_t *cnt, struct mutex *lock);

trunk/Documentation/powerpc/hvcs.txt

@@ -560,7 +560,7 @@ The proper channel for reporting bugs is either through the Linux OS
 distribution company that provided your OS or by posting issues to the
 PowerPC development mailing list at:
 
-linuxppc-dev@lists.ozlabs.org
+linuxppc-dev@ozlabs.org
 
 This request is to provide a documented and searchable public exchange
 of the problems and solutions surrounding this driver for the benefit of

trunk/Documentation/sound/alsa/HD-Audio-Models.txt

@@ -296,7 +296,6 @@ Conexant 5051
 Conexant 5066
 =============
   laptop	Basic Laptop config (default)
-  hp-laptop	HP laptops, e g G60
   dell-laptop	Dell laptops
   dell-vostro	Dell Vostro
   olpc-xo-1_5	OLPC XO 1.5