---

yaml
---
r: 145532
b: refs/heads/master
c: 947ca2e
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 6b4bfb87b638a4f114dfb6f72f4ac1be88a4ebe4
+refs/heads/master: 947ca2e983c7f46b49dbfb5bf51d39941d39f000

trunk/arch/arm/include/asm/cache.h

@@ -7,4 +7,20 @@
 #define L1_CACHE_SHIFT		5
 #define L1_CACHE_BYTES		(1 << L1_CACHE_SHIFT)
 
+/*
+ * Memory returned by kmalloc() may be used for DMA, so we must make
+ * sure that all such allocations are cache aligned. Otherwise,
+ * unrelated code may cause parts of the buffer to be read into the
+ * cache before the transfer is done, causing old data to be seen by
+ * the CPU.
+ */
+#define ARCH_KMALLOC_MINALIGN	L1_CACHE_BYTES
+
+/*
+ * With EABI on ARMv5 and above we must have 64-bit aligned slab pointers.
+ */
+#if defined(CONFIG_AEABI) && (__LINUX_ARM_ARCH__ >= 5)
+#define ARCH_SLAB_MINALIGN 8
+#endif
+
 #endif

trunk/arch/arm/include/asm/page.h

@@ -202,13 +202,6 @@ typedef struct page *pgtable_t;
 	(((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0) | \
 	 VM_READ | VM_WRITE | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
 
-/*
- * With EABI on ARMv5 and above we must have 64-bit aligned slab pointers.
- */
-#if defined(CONFIG_AEABI) && (__LINUX_ARM_ARCH__ >= 5)
-#define ARCH_SLAB_MINALIGN 8
-#endif
-
 #include <asm-generic/page.h>
 
 #endif

trunk/arch/arm/mm/proc-v7.S

@@ -184,23 +184,37 @@ __v7_setup:
 	stmia	r12, {r0-r5, r7, r9, r11, lr}
 	bl	v7_flush_dcache_all
 	ldmia	r12, {r0-r5, r7, r9, r11, lr}
+
+	mrc	p15, 0, r0, c0, c0, 0		@ read main ID register
+	and	r10, r0, #0xff000000		@ ARM?
+	teq	r10, #0x41000000
+	bne	2f
+	and	r5, r0, #0x00f00000		@ variant
+	and	r6, r0, #0x0000000f		@ revision
+	orr	r0, r6, r5, lsr #20-4		@ combine variant and revision
+
 #ifdef CONFIG_ARM_ERRATA_430973
-	mrc	p15, 0, r10, c1, c0, 1		@ read aux control register
-	orr	r10, r10, #(1 << 6)		@ set IBE to 1
-	mcr	p15, 0, r10, c1, c0, 1		@ write aux control register
+	teq	r5, #0x00100000			@ only present in r1p*
+	mrceq	p15, 0, r10, c1, c0, 1		@ read aux control register
+	orreq	r10, r10, #(1 << 6)		@ set IBE to 1
+	mcreq	p15, 0, r10, c1, c0, 1		@ write aux control register
 #endif
 #ifdef CONFIG_ARM_ERRATA_458693
-	mrc	p15, 0, r10, c1, c0, 1		@ read aux control register
-	orr	r10, r10, #(1 << 5)		@ set L1NEON to 1
-	orr	r10, r10, #(1 << 9)		@ set PLDNOP to 1
-	mcr	p15, 0, r10, c1, c0, 1		@ write aux control register
+	teq	r0, #0x20			@ only present in r2p0
+	mrceq	p15, 0, r10, c1, c0, 1		@ read aux control register
+	orreq	r10, r10, #(1 << 5)		@ set L1NEON to 1
+	orreq	r10, r10, #(1 << 9)		@ set PLDNOP to 1
+	mcreq	p15, 0, r10, c1, c0, 1		@ write aux control register
 #endif
 #ifdef CONFIG_ARM_ERRATA_460075
-	mrc	p15, 1, r10, c9, c0, 2		@ read L2 cache aux ctrl register
-	orr	r10, r10, #(1 << 22)		@ set the Write Allocate disable bit
-	mcr	p15, 1, r10, c9, c0, 2		@ write the L2 cache aux ctrl register
+	teq	r0, #0x20			@ only present in r2p0
+	mrceq	p15, 1, r10, c9, c0, 2		@ read L2 cache aux ctrl register
+	tsteq	r10, #1 << 22
+	orreq	r10, r10, #(1 << 22)		@ set the Write Allocate disable bit
+	mcreq	p15, 1, r10, c9, c0, 2		@ write the L2 cache aux ctrl register
 #endif
-	mov	r10, #0
+
+2:	mov	r10, #0
 #ifdef HARVARD_CACHE
 	mcr	p15, 0, r10, c7, c5, 0		@ I+BTB cache invalidate
 #endif