---

yaml
---
r: 139320
b: refs/heads/master
c: b43d451
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: a52e2e3513d4beafe8fe8699f1519b021c2d05ba
+refs/heads/master: b43d451385ef833e0696032aac2629da04d46c59

trunk/drivers/pci/pcie/portdrv.h

@@ -25,6 +25,12 @@
 #define PCIE_CAPABILITIES_REG		0x2
 #define PCIE_SLOT_CAPABILITIES_REG	0x14
 #define PCIE_PORT_DEVICE_MAXSERVICES	4
+#define PCIE_PORT_MSI_VECTOR_MASK	0x1f
+/*
+ * According to the PCI Express Base Specification 2.0, the indices of the MSI-X
+ * table entires used by port services must not exceed 31
+ */
+#define PCIE_PORT_MAX_MSIX_ENTRIES	32
 
 #define get_descriptor_id(type, service) (((type - 4) << 4) | service)
 

trunk/drivers/pci/pcie/portdrv_core.c

@@ -30,6 +30,152 @@ static void release_pcie_device(struct device *dev)
 	kfree(to_pcie_device(dev));			
 }
 
+/**
+ * pcie_port_msix_add_entry - add entry to given array of MSI-X entries
+ * @entries: Array of MSI-X entries
+ * @new_entry: Index of the entry to add to the array
+ * @nr_entries: Number of entries aleady in the array
+ *
+ * Return value: Position of the added entry in the array
+ */
+static int pcie_port_msix_add_entry(
+	struct msix_entry *entries, int new_entry, int nr_entries)
+{
+	int j;
+
+	for (j = 0; j < nr_entries; j++)
+		if (entries[j].entry == new_entry)
+			return j;
+
+	entries[j].entry = new_entry;
+	return j;
+}
+
+/**
+ * pcie_port_enable_msix - try to set up MSI-X as interrupt mode for given port
+ * @dev: PCI Express port to handle
+ * @vectors: Array of interrupt vectors to populate
+ * @mask: Bitmask of port capabilities returned by get_port_device_capability()
+ *
+ * Return value: 0 on success, error code on failure
+ */
+static int pcie_port_enable_msix(struct pci_dev *dev, int *vectors, int mask)
+{
+	struct msix_entry *msix_entries;
+	int idx[PCIE_PORT_DEVICE_MAXSERVICES];
+	int nr_entries, status, pos, i, nvec;
+	u16 reg16;
+	u32 reg32;
+
+	nr_entries = pci_msix_table_size(dev);
+	if (!nr_entries)
+		return -EINVAL;
+	if (nr_entries > PCIE_PORT_MAX_MSIX_ENTRIES)
+		nr_entries = PCIE_PORT_MAX_MSIX_ENTRIES;
+
+	msix_entries = kzalloc(sizeof(*msix_entries) * nr_entries, GFP_KERNEL);
+	if (!msix_entries)
+		return -ENOMEM;
+
+	/*
+	 * Allocate as many entries as the port wants, so that we can check
+	 * which of them will be useful.  Moreover, if nr_entries is correctly
+	 * equal to the number of entries this port actually uses, we'll happily
+	 * go through without any tricks.
+	 */
+	for (i = 0; i < nr_entries; i++)
+		msix_entries[i].entry = i;
+
+	status = pci_enable_msix(dev, msix_entries, nr_entries);
+	if (status)
+		goto Exit;
+
+	for (i = 0; i < PCIE_PORT_DEVICE_MAXSERVICES; i++)
+		idx[i] = -1;
+	status = -EIO;
+	nvec = 0;
+
+	if (mask & (PCIE_PORT_SERVICE_PME | PCIE_PORT_SERVICE_HP)) {
+		int entry;
+
+		/*
+		 * The code below follows the PCI Express Base Specification 2.0
+		 * stating in Section 6.1.6 that "PME and Hot-Plug Event
+		 * interrupts (when both are implemented) always share the same
+		 * MSI or MSI-X vector, as indicated by the Interrupt Message
+		 * Number field in the PCI Express Capabilities register", where
+		 * according to Section 7.8.2 of the specification "For MSI-X,
+		 * the value in this field indicates which MSI-X Table entry is
+		 * used to generate the interrupt message."
+		 */
+		pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
+		pci_read_config_word(dev, pos + PCIE_CAPABILITIES_REG, &reg16);
+		entry = (reg16 >> 9) & PCIE_PORT_MSI_VECTOR_MASK;
+		if (entry >= nr_entries)
+			goto Error;
+
+		i = pcie_port_msix_add_entry(msix_entries, entry, nvec);
+		if (i == nvec)
+			nvec++;
+
+		idx[PCIE_PORT_SERVICE_PME_SHIFT] = i;
+		idx[PCIE_PORT_SERVICE_HP_SHIFT] = i;
+	}
+
+	if (mask & PCIE_PORT_SERVICE_AER) {
+		int entry;
+
+		/*
+		 * The code below follows Section 7.10.10 of the PCI Express
+		 * Base Specification 2.0 stating that bits 31-27 of the Root
+		 * Error Status Register contain a value indicating which of the
+		 * MSI/MSI-X vectors assigned to the port is going to be used
+		 * for AER, where "For MSI-X, the value in this register
+		 * indicates which MSI-X Table entry is used to generate the
+		 * interrupt message."
+		 */
+		pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
+		pci_read_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, &reg32);
+		entry = reg32 >> 27;
+		if (entry >= nr_entries)
+			goto Error;
+
+		i = pcie_port_msix_add_entry(msix_entries, entry, nvec);
+		if (i == nvec)
+			nvec++;
+
+		idx[PCIE_PORT_SERVICE_AER_SHIFT] = i;
+	}
+
+	/*
+	 * If nvec is equal to the allocated number of entries, we can just use
+	 * what we have.  Otherwise, the port has some extra entries not for the
+	 * services we know and we need to work around that.
+	 */
+	if (nvec == nr_entries) {
+		status = 0;
+	} else {
+		/* Drop the temporary MSI-X setup */
+		pci_disable_msix(dev);
+
+		/* Now allocate the MSI-X vectors for real */
+		status = pci_enable_msix(dev, msix_entries, nvec);
+		if (status)
+			goto Exit;
+	}
+
+	for (i = 0; i < PCIE_PORT_DEVICE_MAXSERVICES; i++)
+		vectors[i] = idx[i] >= 0 ? msix_entries[idx[i]].vector : -1;
+
+ Exit:
+	kfree(msix_entries);
+	return status;
+
+ Error:
+	pci_disable_msix(dev);
+	goto Exit;
+}
+
 /**
  * assign_interrupt_mode - choose interrupt mode for PCI Express port services
  *                         (INTx, MSI-X, MSI) and set up vectors
@@ -42,49 +188,31 @@ static void release_pcie_device(struct device *dev)
 static int assign_interrupt_mode(struct pci_dev *dev, int *vectors, int mask)
 {
 	struct pcie_port_data *port_data = pci_get_drvdata(dev);
-	int i, pos, nvec, status = -EINVAL;
-	int interrupt_mode = PCIE_PORT_NO_IRQ;
-
-	/* Set INTx as default */
-	for (i = 0, nvec = 0; i < PCIE_PORT_DEVICE_MAXSERVICES; i++) {
-		if (mask & (1 << i)) 
-			nvec++;
-		vectors[i] = dev->irq;
-	}
-	if (dev->pin)
-		interrupt_mode = PCIE_PORT_INTx_MODE;
+	int irq, interrupt_mode = PCIE_PORT_NO_IRQ;
+	int i;
 
 	/* Check MSI quirk */
 	if (port_data->port_type == PCIE_RC_PORT && pcie_mch_quirk)
-		return interrupt_mode;
+		goto Fallback;
+
+	/* Try to use MSI-X if supported */
+	if (!pcie_port_enable_msix(dev, vectors, mask))
+		return PCIE_PORT_MSIX_MODE;
+
+	/* We're not going to use MSI-X, so try MSI and fall back to INTx */
+	if (!pci_enable_msi(dev))
+		interrupt_mode = PCIE_PORT_MSI_MODE;
+
+ Fallback:
+	if (interrupt_mode == PCIE_PORT_NO_IRQ && dev->pin)
+		interrupt_mode = PCIE_PORT_INTx_MODE;
+
+	irq = interrupt_mode != PCIE_PORT_NO_IRQ ? dev->irq : -1;
+	for (i = 0; i < PCIE_PORT_DEVICE_MAXSERVICES; i++)
+		vectors[i] = irq;
+
+	vectors[PCIE_PORT_SERVICE_VC_SHIFT] = -1;
 
-	/* Select MSI-X over MSI if supported */		
-	pos = pci_find_capability(dev, PCI_CAP_ID_MSIX);
-	if (pos) {
-		struct msix_entry msix_entries[PCIE_PORT_DEVICE_MAXSERVICES] = 
-			{{0, 0}, {0, 1}, {0, 2}, {0, 3}};
-		status = pci_enable_msix(dev, msix_entries, nvec);
-		if (!status) {
-			int j = 0;
-
-			interrupt_mode = PCIE_PORT_MSIX_MODE;
-			for (i = 0; i < PCIE_PORT_DEVICE_MAXSERVICES; i++) {
-				if (mask & (1 << i)) 
-					vectors[i] = msix_entries[j++].vector;
-			}
-		}
-	} 
-	if (status) {
-		pos = pci_find_capability(dev, PCI_CAP_ID_MSI);
-		if (pos) {
-			status = pci_enable_msi(dev);
-			if (!status) {
-				interrupt_mode = PCIE_PORT_MSI_MODE;
-				for (i = 0;i < PCIE_PORT_DEVICE_MAXSERVICES;i++)
-					vectors[i] = dev->irq;
-			}
-		}
-	} 
 	return interrupt_mode;
 }
 

trunk/include/linux/pcieport_if.h

@@ -16,10 +16,14 @@
 #define PCIE_ANY_PORT			7
 
 /* Service Type */
-#define PCIE_PORT_SERVICE_PME		1	/* Power Management Event */
-#define PCIE_PORT_SERVICE_AER		2	/* Advanced Error Reporting */
-#define PCIE_PORT_SERVICE_HP		4	/* Native Hotplug */
-#define PCIE_PORT_SERVICE_VC		8	/* Virtual Channel */
+#define PCIE_PORT_SERVICE_PME_SHIFT	0	/* Power Management Event */
+#define PCIE_PORT_SERVICE_PME		(1 << PCIE_PORT_SERVICE_PME_SHIFT)
+#define PCIE_PORT_SERVICE_AER_SHIFT	1	/* Advanced Error Reporting */
+#define PCIE_PORT_SERVICE_AER		(1 << PCIE_PORT_SERVICE_AER_SHIFT)
+#define PCIE_PORT_SERVICE_HP_SHIFT	2	/* Native Hotplug */
+#define PCIE_PORT_SERVICE_HP		(1 << PCIE_PORT_SERVICE_HP_SHIFT)
+#define PCIE_PORT_SERVICE_VC_SHIFT	3	/* Virtual Channel */
+#define PCIE_PORT_SERVICE_VC		(1 << PCIE_PORT_SERVICE_VC_SHIFT)
 
 /* Root/Upstream/Downstream Port's Interrupt Mode */
 #define PCIE_PORT_NO_IRQ		(-1)