Merge remote branch 'anholt/drm-intel-next' into drm-next

* anholt/drm-intel-next: (515 commits)
  drm/i915: Fix out of tree builds
  drm/i915: move fence lru to struct drm_i915_fence_reg
  drm/i915: don't allow tiling changes on pinned buffers v2
  drm/i915: Be extra careful about A/D matching for multifunction SDVO
  drm/i915: Fix DDC bus selection for multifunction SDVO
  drm/i915: cleanup mode setting before unmapping registers
  drm/i915: Make fbc control wrapper functions
  drm/i915: Wait for the GPU whilst shrinking, if truly desperate.
  drm/i915: Use spatio-temporal dithering on PCH
  [MTD] Remove zero-length files mtdbdi.c and internal.ho
  pata_pcmcia / ide-cs: Fix bad hashes for Transcend and kingston IDs
  libata: Fix several inaccuracies in developer's guide
  slub: Fix bad boundary check in init_kmem_cache_nodes()
  raid6: fix recovery performance regression
  KEYS: call_sbin_request_key() must write lock keyrings before modifying them
  KEYS: Use RCU dereference wrappers in keyring key type code
  KEYS: find_keyring_by_name() can gain access to a freed keyring
  ALSA: hda: Fix 0 dB for Packard Bell models using Conexant CX20549 (Venice)
  ALSA: hda - Add quirk for Dell Inspiron 19T using a Conexant CX20582
  ALSA: take tu->qlock with irqs disabled
  ...

Documentation/DocBook/libata.tmpl

@@ -107,10 +107,6 @@ void (*dev_config) (struct ata_port *, struct ata_device *);
 	issue of SET FEATURES - XFER MODE, and prior to operation.
 	</para>
 	<para>
-	Called by ata_device_add() after ata_dev_identify() determines
-	a device is present.
-	</para>
-	<para>
 	This entry may be specified as NULL in ata_port_operations.
 	</para>
 
@@ -154,8 +150,8 @@ unsigned int (*mode_filter) (struct ata_port *, struct ata_device *, unsigned in
 
 	<sect2><title>Taskfile read/write</title>
 	<programlisting>
-void (*tf_load) (struct ata_port *ap, struct ata_taskfile *tf);
-void (*tf_read) (struct ata_port *ap, struct ata_taskfile *tf);
+void (*sff_tf_load) (struct ata_port *ap, struct ata_taskfile *tf);
+void (*sff_tf_read) (struct ata_port *ap, struct ata_taskfile *tf);
 	</programlisting>
 
 	<para>
@@ -164,36 +160,35 @@ void (*tf_read) (struct ata_port *ap, struct ata_taskfile *tf);
 	hardware registers / DMA buffers, to obtain the current set of
 	taskfile register values.
 	Most drivers for taskfile-based hardware (PIO or MMIO) use
-	ata_tf_load() and ata_tf_read() for these hooks.
+	ata_sff_tf_load() and ata_sff_tf_read() for these hooks.
 	</para>
 
 	</sect2>
 
 	<sect2><title>PIO data read/write</title>
 	<programlisting>
-void (*data_xfer) (struct ata_device *, unsigned char *, unsigned int, int);
+void (*sff_data_xfer) (struct ata_device *, unsigned char *, unsigned int, int);
 	</programlisting>
 
 	<para>
 All bmdma-style drivers must implement this hook.  This is the low-level
 operation that actually copies the data bytes during a PIO data
 transfer.
-Typically the driver
-will choose one of ata_pio_data_xfer_noirq(), ata_pio_data_xfer(), or
-ata_mmio_data_xfer().
+Typically the driver will choose one of ata_sff_data_xfer_noirq(),
+ata_sff_data_xfer(), or ata_sff_data_xfer32().
 	</para>
 
 	</sect2>
 
 	<sect2><title>ATA command execute</title>
 	<programlisting>
-void (*exec_command)(struct ata_port *ap, struct ata_taskfile *tf);
+void (*sff_exec_command)(struct ata_port *ap, struct ata_taskfile *tf);
 	</programlisting>
 
 	<para>
 	causes an ATA command, previously loaded with
 	->tf_load(), to be initiated in hardware.
-	Most drivers for taskfile-based hardware use ata_exec_command()
+	Most drivers for taskfile-based hardware use ata_sff_exec_command()
 	for this hook.
 	</para>
 
@@ -218,29 +213,23 @@ command.
 
 	<sect2><title>Read specific ATA shadow registers</title>
 	<programlisting>
-u8   (*check_status)(struct ata_port *ap);
-u8   (*check_altstatus)(struct ata_port *ap);
+u8   (*sff_check_status)(struct ata_port *ap);
+u8   (*sff_check_altstatus)(struct ata_port *ap);
 	</programlisting>
 
 	<para>
 	Reads the Status/AltStatus ATA shadow register from
 	hardware.  On some hardware, reading the Status register has
 	the side effect of clearing the interrupt condition.
 	Most drivers for taskfile-based hardware use
-	ata_check_status() for this hook.
-	</para>
-	<para>
-	Note that because this is called from ata_device_add(), at
-	least a dummy function that clears device interrupts must be
-	provided for all drivers, even if the controller doesn't
-	actually have a taskfile status register.
+	ata_sff_check_status() for this hook.
 	</para>
 
 	</sect2>
 
 	<sect2><title>Select ATA device on bus</title>
 	<programlisting>
-void (*dev_select)(struct ata_port *ap, unsigned int device);
+void (*sff_dev_select)(struct ata_port *ap, unsigned int device);
 	</programlisting>
 
 	<para>
@@ -251,9 +240,7 @@ void (*dev_select)(struct ata_port *ap, unsigned int device);
 	</para>
 	<para>
 	Most drivers for taskfile-based hardware use
-	ata_std_dev_select() for this hook.  Controllers which do not
-	support second drives on a port (such as SATA contollers) will
-	use ata_noop_dev_select().
+	ata_sff_dev_select() for this hook.
 	</para>
 
 	</sect2>
@@ -441,13 +428,13 @@ void (*irq_clear) (struct ata_port *);
 	to struct ata_host_set.
 	</para>
 	<para>
-	Most legacy IDE drivers use ata_interrupt() for the
+	Most legacy IDE drivers use ata_sff_interrupt() for the
 	irq_handler hook, which scans all ports in the host_set,
 	determines which queued command was active (if any), and calls
-	ata_host_intr(ap,qc).
+	ata_sff_host_intr(ap,qc).
 	</para>
 	<para>
-	Most legacy IDE drivers use ata_bmdma_irq_clear() for the
+	Most legacy IDE drivers use ata_sff_irq_clear() for the
 	irq_clear() hook, which simply clears the interrupt and error
 	flags in the DMA status register.
 	</para>
@@ -496,10 +483,6 @@ void (*host_stop) (struct ata_host_set *host_set);
 	data from port at this time.
 	</para>
 	<para>
-	Many drivers use ata_port_stop() as this hook, which frees the
-	PRD table.
-	</para>
-	<para>
 	->host_stop() is called after all ->port_stop() calls
 have completed.  The hook must finalize hardware shutdown, release DMA
 and other resources, etc.

Documentation/HOWTO

@@ -234,7 +234,7 @@ process is as follows:
     Linus, usually the patches that have already been included in the
     -next kernel for a few weeks.  The preferred way to submit big changes
     is using git (the kernel's source management tool, more information
-    can be found at http://git.or.cz/) but plain patches are also just
+    can be found at http://git-scm.com/) but plain patches are also just
     fine.
   - After two weeks a -rc1 kernel is released it is now possible to push
     only patches that do not include new features that could affect the

Documentation/cgroups/cgroups.txt

@@ -235,8 +235,7 @@ containing the following files describing that cgroup:
  - cgroup.procs: list of tgids in the cgroup.  This list is not
    guaranteed to be sorted or free of duplicate tgids, and userspace
    should sort/uniquify the list if this property is required.
-   Writing a tgid into this file moves all threads with that tgid into
-   this cgroup.
+   This is a read-only file, for now.
  - notify_on_release flag: run the release agent on exit?
  - release_agent: the path to use for release notifications (this file
    exists in the top cgroup only)

Documentation/i2c/writing-clients

@@ -74,6 +74,11 @@ structure at all.  You should use this to keep device-specific data.
 	/* retrieve the value */
 	void *i2c_get_clientdata(const struct i2c_client *client);
 
+Note that starting with kernel 2.6.34, you don't have to set the `data' field
+to NULL in remove() or if probe() failed anymore. The i2c-core does this
+automatically on these occasions. Those are also the only times the core will
+touch this field.
+
 
 Accessing the client
 ====================

Documentation/input/elantech.txt

@@ -333,14 +333,14 @@ byte 0:
 byte 1:
 
    bit   7   6   5   4   3   2   1   0
-        x15 x14 x13 x12 x11 x10 x9  x8
+         .   .   .   .   .  x10 x9  x8
 
 byte 2:
 
    bit   7   6   5   4   3   2   1   0
         x7  x6  x5  x4  x4  x2  x1  x0
 
-         x15..x0 = absolute x value (horizontal)
+         x10..x0 = absolute x value (horizontal)
 
 byte 3:
 
@@ -350,14 +350,14 @@ byte 3:
 byte 4:
 
    bit   7   6   5   4   3   2   1   0
-        y15 y14 y13 y12 y11 y10 y8  y8
+         .   .   .   .   .   .  y9  y8
 
 byte 5:
 
    bit   7   6   5   4   3   2   1   0
         y7  y6  y5  y4  y3  y2  y1  y0
 
-         y15..y0 = absolute y value (vertical)
+         y9..y0 = absolute y value (vertical)
 
 
 4.2.2 Two finger touch

Documentation/kernel-parameters.txt

@@ -1194,7 +1194,7 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	libata.force=	[LIBATA] Force configurations.  The format is comma
 			separated list of "[ID:]VAL" where ID is
-			PORT[:DEVICE].  PORT and DEVICE are decimal numbers
+			PORT[.DEVICE].  PORT and DEVICE are decimal numbers
 			matching port, link or device.  Basically, it matches
 			the ATA ID string printed on console by libata.  If
 			the whole ID part is omitted, the last PORT and DEVICE

Documentation/spi/spidev_test.c

@@ -58,7 +58,7 @@ static void transfer(int fd)
 	};
 
 	ret = ioctl(fd, SPI_IOC_MESSAGE(1), &tr);
-	if (ret == 1)
+	if (ret < 1)
 		pabort("can't send spi message");
 
 	for (ret = 0; ret < ARRAY_SIZE(tx); ret++) {

Documentation/stable_kernel_rules.txt

@@ -18,16 +18,15 @@ Rules on what kind of patches are accepted, and which ones are not, into the
  - It cannot contain any "trivial" fixes in it (spelling changes,
    whitespace cleanups, etc).
  - It must follow the Documentation/SubmittingPatches rules.
- - It or an equivalent fix must already exist in Linus' tree.  Quote the
-   respective commit ID in Linus' tree in your patch submission to -stable.
+ - It or an equivalent fix must already exist in Linus' tree (upstream).
 
 
 Procedure for submitting patches to the -stable tree:
 
  - Send the patch, after verifying that it follows the above rules, to
-   stable@kernel.org.
- - To have the patch automatically included in the stable tree, add the
-   the tag
+   stable@kernel.org.  You must note the upstream commit ID in the changelog
+   of your submission.
+ - To have the patch automatically included in the stable tree, add the tag
      Cc: stable@kernel.org
    in the sign-off area. Once the patch is merged it will be applied to
    the stable tree without anything else needing to be done by the author

MAINTAINERS

@@ -1960,7 +1960,7 @@ F:	lib/kobj*
 
 DRM DRIVERS
 M:	David Airlie <airlied@linux.ie>
-L:	dri-devel@lists.sourceforge.net
+L:	dri-devel@lists.freedesktop.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6.git
 S:	Maintained
 F:	drivers/gpu/drm/
@@ -4482,17 +4482,17 @@ S:	Maintained
 F:	drivers/ata/sata_promise.*
 
 PS3 NETWORK SUPPORT
-M:	Geoff Levand <geoffrey.levand@am.sony.com>
+M:	Geoff Levand <geoff@infradead.org>
 L:	netdev@vger.kernel.org
 L:	cbe-oss-dev@ozlabs.org
-S:	Supported
+S:	Maintained
 F:	drivers/net/ps3_gelic_net.*
 
 PS3 PLATFORM SUPPORT
-M:	Geoff Levand <geoffrey.levand@am.sony.com>
+M:	Geoff Levand <geoff@infradead.org>
 L:	linuxppc-dev@ozlabs.org
 L:	cbe-oss-dev@ozlabs.org
-S:	Supported
+S:	Maintained
 F:	arch/powerpc/boot/ps3*
 F:	arch/powerpc/include/asm/lv1call.h
 F:	arch/powerpc/include/asm/ps3*.h
@@ -4791,12 +4791,11 @@ F:	drivers/s390/crypto/
 
 S390 ZFCP DRIVER
 M:	Christof Schmitt <christof.schmitt@de.ibm.com>
-M:	Martin Peschke <mp3@de.ibm.com>
+M:	Swen Schillig <swen@vnet.ibm.com>
 M:	linux390@de.ibm.com
 L:	linux-s390@vger.kernel.org
 W:	http://www.ibm.com/developerworks/linux/linux390/
 S:	Supported
-F:	Documentation/s390/zfcpdump.txt
 F:	drivers/s390/scsi/zfcp_*
 
 S390 IUCV NETWORK LAYER

Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 34
-EXTRAVERSION = -rc5
+EXTRAVERSION = -rc6
 NAME = Sheep on Meth
 
 # *DOCUMENTATION*

arch/arm/Kconfig

@@ -253,6 +253,7 @@ config ARCH_REALVIEW
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select ARCH_WANT_OPTIONAL_GPIOLIB
+	select GPIO_PL061 if GPIOLIB
 	help
 	  This enables support for ARM Ltd RealView boards.