Merge git://github.com/agraf/linux-2.6.git kvm-ppc-next into queue

Documentation/virtual/kvm/api.txt

@@ -1792,6 +1792,23 @@ registers, find a list below:
   PPC   | KVM_REG_PPC_TSR	| 32
   PPC   | KVM_REG_PPC_OR_TSR	| 32
   PPC   | KVM_REG_PPC_CLEAR_TSR	| 32
+  PPC   | KVM_REG_PPC_MAS0	| 32
+  PPC   | KVM_REG_PPC_MAS1	| 32
+  PPC   | KVM_REG_PPC_MAS2	| 64
+  PPC   | KVM_REG_PPC_MAS7_3	| 64
+  PPC   | KVM_REG_PPC_MAS4	| 32
+  PPC   | KVM_REG_PPC_MAS6	| 32
+  PPC   | KVM_REG_PPC_MMUCFG	| 32
+  PPC   | KVM_REG_PPC_TLB0CFG	| 32
+  PPC   | KVM_REG_PPC_TLB1CFG	| 32
+  PPC   | KVM_REG_PPC_TLB2CFG	| 32
+  PPC   | KVM_REG_PPC_TLB3CFG	| 32
+  PPC   | KVM_REG_PPC_TLB0PS	| 32
+  PPC   | KVM_REG_PPC_TLB1PS	| 32
+  PPC   | KVM_REG_PPC_TLB2PS	| 32
+  PPC   | KVM_REG_PPC_TLB3PS	| 32
+  PPC   | KVM_REG_PPC_EPTCFG	| 32
+  PPC   | KVM_REG_PPC_ICP_STATE | 64
 
 ARM registers are mapped using the lower 32 bits.  The upper 16 of that
 is the register group type, or coprocessor number:
@@ -2173,6 +2190,76 @@ header; first `n_valid' valid entries with contents from the data
 written, then `n_invalid' invalid entries, invalidating any previously
 valid entries found.
 
+4.79 KVM_CREATE_DEVICE
+
+Capability: KVM_CAP_DEVICE_CTRL
+Type: vm ioctl
+Parameters: struct kvm_create_device (in/out)
+Returns: 0 on success, -1 on error
+Errors:
+  ENODEV: The device type is unknown or unsupported
+  EEXIST: Device already created, and this type of device may not
+          be instantiated multiple times
+
+  Other error conditions may be defined by individual device types or
+  have their standard meanings.
+
+Creates an emulated device in the kernel.  The file descriptor returned
+in fd can be used with KVM_SET/GET/HAS_DEVICE_ATTR.
+
+If the KVM_CREATE_DEVICE_TEST flag is set, only test whether the
+device type is supported (not necessarily whether it can be created
+in the current vm).
+
+Individual devices should not define flags.  Attributes should be used
+for specifying any behavior that is not implied by the device type
+number.
+
+struct kvm_create_device {
+	__u32	type;	/* in: KVM_DEV_TYPE_xxx */
+	__u32	fd;	/* out: device handle */
+	__u32	flags;	/* in: KVM_CREATE_DEVICE_xxx */
+};
+
+4.80 KVM_SET_DEVICE_ATTR/KVM_GET_DEVICE_ATTR
+
+Capability: KVM_CAP_DEVICE_CTRL
+Type: device ioctl
+Parameters: struct kvm_device_attr
+Returns: 0 on success, -1 on error
+Errors:
+  ENXIO:  The group or attribute is unknown/unsupported for this device
+  EPERM:  The attribute cannot (currently) be accessed this way
+          (e.g. read-only attribute, or attribute that only makes
+          sense when the device is in a different state)
+
+  Other error conditions may be defined by individual device types.
+
+Gets/sets a specified piece of device configuration and/or state.  The
+semantics are device-specific.  See individual device documentation in
+the "devices" directory.  As with ONE_REG, the size of the data
+transferred is defined by the particular attribute.
+
+struct kvm_device_attr {
+	__u32	flags;		/* no flags currently defined */
+	__u32	group;		/* device-defined */
+	__u64	attr;		/* group-defined */
+	__u64	addr;		/* userspace address of attr data */
+};
+
+4.81 KVM_HAS_DEVICE_ATTR
+
+Capability: KVM_CAP_DEVICE_CTRL
+Type: device ioctl
+Parameters: struct kvm_device_attr
+Returns: 0 on success, -1 on error
+Errors:
+  ENXIO:  The group or attribute is unknown/unsupported for this device
+
+Tests whether a device supports a particular attribute.  A successful
+return indicates the attribute is implemented.  It does not necessarily
+indicate that the attribute can be read or written in the device's
+current state.  "addr" is ignored.
 
 4.77 KVM_ARM_VCPU_INIT
 
@@ -2255,6 +2342,25 @@ and distributor interface, the ioctl must be called after calling
 KVM_CREATE_IRQCHIP, but before calling KVM_RUN on any of the VCPUs.  Calling
 this ioctl twice for any of the base addresses will return -EEXIST.
 
+4.82 KVM_PPC_RTAS_DEFINE_TOKEN
+
+Capability: KVM_CAP_PPC_RTAS
+Architectures: ppc
+Type: vm ioctl
+Parameters: struct kvm_rtas_token_args
+Returns: 0 on success, -1 on error
+
+Defines a token value for a RTAS (Run Time Abstraction Services)
+service in order to allow it to be handled in the kernel.  The
+argument struct gives the name of the service, which must be the name
+of a service that has a kernel-side implementation.  If the token
+value is non-zero, it will be associated with that service, and
+subsequent RTAS calls by the guest specifying that token will be
+handled by the kernel.  If the token value is 0, then any token
+associated with the service will be forgotten, and subsequent RTAS
+calls by the guest for that service will be passed to userspace to be
+handled.
+
 
 5. The kvm_run structure
 ------------------------
@@ -2658,3 +2764,11 @@ to receive the topmost interrupt vector.
 When disabled (args[0] == 0), behavior is as if this facility is unsupported.
 
 When this capability is enabled, KVM_EXIT_EPR can occur.
+
+6.6 KVM_CAP_IRQ_MPIC
+
+Architectures: ppc
+Parameters: args[0] is the MPIC device fd
+            args[1] is the MPIC CPU number for this vcpu
+
+This capability connects the vcpu to an in-kernel MPIC device.

Documentation/virtual/kvm/devices/README

@@ -0,0 +1 @@
+This directory contains specific device bindings for KVM_CAP_DEVICE_CTRL.

Documentation/virtual/kvm/devices/mpic.txt

@@ -0,0 +1,56 @@
+MPIC interrupt controller
+=========================
+
+Device types supported:
+  KVM_DEV_TYPE_FSL_MPIC_20     Freescale MPIC v2.0
+  KVM_DEV_TYPE_FSL_MPIC_42     Freescale MPIC v4.2
+
+Only one MPIC instance, of any type, may be instantiated.  The created
+MPIC will act as the system interrupt controller, connecting to each
+vcpu's interrupt inputs.
+
+Groups:
+  KVM_DEV_MPIC_GRP_MISC
+  Attributes:
+    KVM_DEV_MPIC_BASE_ADDR (rw, 64-bit)
+      Base address of the 256 KiB MPIC register space.  Must be
+      naturally aligned.  A value of zero disables the mapping.
+      Reset value is zero.
+
+  KVM_DEV_MPIC_GRP_REGISTER (rw, 32-bit)
+    Access an MPIC register, as if the access were made from the guest.
+    "attr" is the byte offset into the MPIC register space.  Accesses
+    must be 4-byte aligned.
+
+    MSIs may be signaled by using this attribute group to write
+    to the relevant MSIIR.
+
+  KVM_DEV_MPIC_GRP_IRQ_ACTIVE (rw, 32-bit)
+    IRQ input line for each standard openpic source.  0 is inactive and 1
+    is active, regardless of interrupt sense.
+
+    For edge-triggered interrupts:  Writing 1 is considered an activating
+    edge, and writing 0 is ignored.  Reading returns 1 if a previously
+    signaled edge has not been acknowledged, and 0 otherwise.
+
+    "attr" is the IRQ number.  IRQ numbers for standard sources are the
+    byte offset of the relevant IVPR from EIVPR0, divided by 32.
+
+IRQ Routing:
+
+  The MPIC emulation supports IRQ routing. Only a single MPIC device can
+  be instantiated. Once that device has been created, it's available as
+  irqchip id 0.
+
+  This irqchip 0 has 256 interrupt pins, which expose the interrupts in
+  the main array of interrupt sources (a.k.a. "SRC" interrupts).
+
+  The numbering is the same as the MPIC device tree binding -- based on
+  the register offset from the beginning of the sources array, without
+  regard to any subdivisions in chip documentation such as "internal"
+  or "external" interrupts.
+
+  Default routes are established for these pins, with the GSI being equal
+  to the pin number.
+
+  Access to non-SRC interrupts is not implemented through IRQ routing mechanisms.

arch/ia64/include/asm/kvm_host.h

@@ -26,6 +26,7 @@
 #define KVM_USER_MEM_SLOTS 32
 
 #define KVM_COALESCED_MMIO_PAGE_OFFSET 1
+#define KVM_IRQCHIP_NUM_PINS  KVM_IOAPIC_NUM_PINS
 
 /* define exit reasons from vmm to kvm*/
 #define EXIT_REASON_VM_PANIC		0

arch/ia64/kvm/Kconfig

@@ -27,6 +27,7 @@ config KVM
 	select PREEMPT_NOTIFIERS
 	select ANON_INODES
 	select HAVE_KVM_IRQCHIP
+	select HAVE_KVM_IRQ_ROUTING
 	select KVM_APIC_ARCHITECTURE
 	select KVM_MMIO
 	---help---

arch/ia64/kvm/Makefile

@@ -49,7 +49,7 @@ ccflags-y := -Ivirt/kvm -Iarch/ia64/kvm/
 asflags-y := -Ivirt/kvm -Iarch/ia64/kvm/
 
 common-objs = $(addprefix ../../../virt/kvm/, kvm_main.o ioapic.o \
-		coalesced_mmio.o irq_comm.o assigned-dev.o)
+		coalesced_mmio.o irq_comm.o assigned-dev.o irqchip.o)
 
 ifeq ($(CONFIG_IOMMU_API),y)
 common-objs += $(addprefix ../../../virt/kvm/, iommu.o)

arch/powerpc/include/asm/hvcall.h

@@ -270,6 +270,9 @@
 #define H_SET_MODE		0x31C
 #define MAX_HCALL_OPCODE	H_SET_MODE
 
+/* Platform specific hcalls, used by KVM */
+#define H_RTAS			0xf000
+
 #ifndef __ASSEMBLY__
 
 /**

arch/powerpc/include/asm/kvm_book3s.h

@@ -142,6 +142,8 @@ extern int kvmppc_mmu_hv_init(void);
 extern int kvmppc_ld(struct kvm_vcpu *vcpu, ulong *eaddr, int size, void *ptr, bool data);
 extern int kvmppc_st(struct kvm_vcpu *vcpu, ulong *eaddr, int size, void *ptr, bool data);
 extern void kvmppc_book3s_queue_irqprio(struct kvm_vcpu *vcpu, unsigned int vec);
+extern void kvmppc_book3s_dequeue_irqprio(struct kvm_vcpu *vcpu,
+					  unsigned int vec);
 extern void kvmppc_inject_interrupt(struct kvm_vcpu *vcpu, int vec, u64 flags);
 extern void kvmppc_set_bat(struct kvm_vcpu *vcpu, struct kvmppc_bat *bat,
 			   bool upper, u32 val);
@@ -156,7 +158,8 @@ void kvmppc_clear_ref_hpte(struct kvm *kvm, unsigned long *hptep,
 			unsigned long pte_index);
 extern void *kvmppc_pin_guest_page(struct kvm *kvm, unsigned long addr,
 			unsigned long *nb_ret);
-extern void kvmppc_unpin_guest_page(struct kvm *kvm, void *addr);
+extern void kvmppc_unpin_guest_page(struct kvm *kvm, void *addr,
+			unsigned long gpa, bool dirty);
 extern long kvmppc_virtmode_h_enter(struct kvm_vcpu *vcpu, unsigned long flags,
 			long pte_index, unsigned long pteh, unsigned long ptel);
 extern long kvmppc_do_h_enter(struct kvm *kvm, unsigned long flags,

arch/powerpc/include/asm/kvm_book3s_64.h

@@ -268,4 +268,17 @@ static inline int is_vrma_hpte(unsigned long hpte_v)
 		(HPTE_V_1TB_SEG | (VRMA_VSID << (40 - 16)));
 }
 
+#ifdef CONFIG_KVM_BOOK3S_64_HV
+/*
+ * Note modification of an HPTE; set the HPTE modified bit
+ * if anyone is interested.
+ */
+static inline void note_hpte_modification(struct kvm *kvm,
+					  struct revmap_entry *rev)
+{
+	if (atomic_read(&kvm->arch.hpte_mod_interest))
+		rev->guest_rpte |= HPTE_GR_MODIFIED;
+}
+#endif /* CONFIG_KVM_BOOK3S_64_HV */
+
 #endif /* __ASM_KVM_BOOK3S_64_H__ */

arch/powerpc/include/asm/kvm_book3s_asm.h

@@ -20,6 +20,11 @@
 #ifndef __ASM_KVM_BOOK3S_ASM_H__
 #define __ASM_KVM_BOOK3S_ASM_H__
 
+/* XICS ICP register offsets */
+#define XICS_XIRR		4
+#define XICS_MFRR		0xc
+#define XICS_IPI		2	/* interrupt source # for IPIs */
+
 #ifdef __ASSEMBLY__
 
 #ifdef CONFIG_KVM_BOOK3S_HANDLER
@@ -81,10 +86,11 @@ struct kvmppc_host_state {
 #ifdef CONFIG_KVM_BOOK3S_64_HV
 	u8 hwthread_req;
 	u8 hwthread_state;
-
+	u8 host_ipi;
 	struct kvm_vcpu *kvm_vcpu;
 	struct kvmppc_vcore *kvm_vcore;
 	unsigned long xics_phys;
+	u32 saved_xirr;
 	u64 dabr;
 	u64 host_mmcr[3];
 	u32 host_pmc[8];