---

yaml
---
r: 25040
b: refs/heads/master
c: 706c8c9
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 8df83028cf52e3bf68dfd35a4b1a044b326a4a99
+refs/heads/master: 706c8c93ba4865a19e981b9770151a7a63c15794

trunk/arch/powerpc/kernel/lparcfg.c

@@ -149,17 +149,17 @@ static void log_plpar_hcall_return(unsigned long rc, char *tag)
 	if (rc == 0)		/* success, return */
 		return;
 /* check for null tag ? */
-	if (rc == H_Hardware)
+	if (rc == H_HARDWARE)
 		printk(KERN_INFO
 		       "plpar-hcall (%s) failed with hardware fault\n", tag);
-	else if (rc == H_Function)
+	else if (rc == H_FUNCTION)
 		printk(KERN_INFO
 		       "plpar-hcall (%s) failed; function not allowed\n", tag);
-	else if (rc == H_Authority)
+	else if (rc == H_AUTHORITY)
 		printk(KERN_INFO
-		       "plpar-hcall (%s) failed; not authorized to this function\n",
-		       tag);
-	else if (rc == H_Parameter)
+		       "plpar-hcall (%s) failed; not authorized to this"
+		       " function\n", tag);
+	else if (rc == H_PARAMETER)
 		printk(KERN_INFO "plpar-hcall (%s) failed; Bad parameter(s)\n",
 		       tag);
 	else
@@ -209,7 +209,7 @@ static void h_pic(unsigned long *pool_idle_time, unsigned long *num_procs)
 	unsigned long dummy;
 	rc = plpar_hcall(H_PIC, 0, 0, 0, 0, pool_idle_time, num_procs, &dummy);
 
-	if (rc != H_Authority)
+	if (rc != H_AUTHORITY)
 		log_plpar_hcall_return(rc, "H_PIC");
 }
 
@@ -529,13 +529,13 @@ static ssize_t lparcfg_write(struct file *file, const char __user * buf,
 	retval = plpar_hcall_norets(H_SET_PPP, *new_entitled_ptr,
 				    *new_weight_ptr);
 
-	if (retval == H_Success || retval == H_Constrained) {
+	if (retval == H_SUCCESS || retval == H_CONSTRAINED) {
 		retval = count;
-	} else if (retval == H_Busy) {
+	} else if (retval == H_BUSY) {
 		retval = -EBUSY;
-	} else if (retval == H_Hardware) {
+	} else if (retval == H_HARDWARE) {
 		retval = -EIO;
-	} else if (retval == H_Parameter) {
+	} else if (retval == H_PARAMETER) {
 		retval = -EINVAL;
 	} else {
 		printk(KERN_WARNING "%s: received unknown hv return code %ld",

trunk/arch/powerpc/kernel/rtas.c

@@ -578,26 +578,26 @@ static void rtas_percpu_suspend_me(void *info)
 	 * We use "waiting" to indicate our state.  As long
 	 * as it is >0, we are still trying to all join up.
 	 * If it goes to 0, we have successfully joined up and
-	 * one thread got H_Continue.  If any error happens,
+	 * one thread got H_CONTINUE.  If any error happens,
 	 * we set it to <0.
 	 */
 	local_irq_save(flags);
 	do {
 		rc = plpar_hcall_norets(H_JOIN);
 		smp_rmb();
-	} while (rc == H_Success && data->waiting > 0);
-	if (rc == H_Success)
+	} while (rc == H_SUCCESS && data->waiting > 0);
+	if (rc == H_SUCCESS)
 		goto out;
 
-	if (rc == H_Continue) {
+	if (rc == H_CONTINUE) {
 		data->waiting = 0;
 		data->args->args[data->args->nargs] =
 			rtas_call(ibm_suspend_me_token, 0, 1, NULL);
 		for_each_possible_cpu(i)
 			plpar_hcall_norets(H_PROD,i);
 	} else {
 		data->waiting = -EBUSY;
-		printk(KERN_ERR "Error on H_Join hypervisor call\n");
+		printk(KERN_ERR "Error on H_JOIN hypervisor call\n");
 	}
 
 out:
@@ -624,7 +624,7 @@ static int rtas_ibm_suspend_me(struct rtas_args *args)
 		printk(KERN_ERR "Error doing global join\n");
 
 	/* Prod each CPU.  This won't hurt, and will wake
-	 * anyone we successfully put to sleep with H_Join
+	 * anyone we successfully put to sleep with H_JOIN.
 	 */
 	for_each_possible_cpu(i)
 		plpar_hcall_norets(H_PROD, i);

trunk/arch/powerpc/platforms/pseries/hvconsole.c

@@ -41,7 +41,7 @@ int hvc_get_chars(uint32_t vtermno, char *buf, int count)
 	unsigned long got;
 
 	if (plpar_hcall(H_GET_TERM_CHAR, vtermno, 0, 0, 0, &got,
-		(unsigned long *)buf, (unsigned long *)buf+1) == H_Success)
+		(unsigned long *)buf, (unsigned long *)buf+1) == H_SUCCESS)
 		return got;
 	return 0;
 }
@@ -69,9 +69,9 @@ int hvc_put_chars(uint32_t vtermno, const char *buf, int count)
 
 	ret = plpar_hcall_norets(H_PUT_TERM_CHAR, vtermno, count, lbuf[0],
 				 lbuf[1]);
-	if (ret == H_Success)
+	if (ret == H_SUCCESS)
 		return count;
-	if (ret == H_Busy)
+	if (ret == H_BUSY)
 		return 0;
 	return -EIO;
 }

trunk/arch/powerpc/platforms/pseries/hvcserver.c

@@ -43,21 +43,21 @@ MODULE_VERSION(HVCS_ARCH_VERSION);
 static int hvcs_convert(long to_convert)
 {
 	switch (to_convert) {
-		case H_Success:
+		case H_SUCCESS:
 			return 0;
-		case H_Parameter:
+		case H_PARAMETER:
 			return -EINVAL;
-		case H_Hardware:
+		case H_HARDWARE:
 			return -EIO;
-		case H_Busy:
-		case H_LongBusyOrder1msec:
-		case H_LongBusyOrder10msec:
-		case H_LongBusyOrder100msec:
-		case H_LongBusyOrder1sec:
-		case H_LongBusyOrder10sec:
-		case H_LongBusyOrder100sec:
+		case H_BUSY:
+		case H_LONG_BUSY_ORDER_1_MSEC:
+		case H_LONG_BUSY_ORDER_10_MSEC:
+		case H_LONG_BUSY_ORDER_100_MSEC:
+		case H_LONG_BUSY_ORDER_1_SEC:
+		case H_LONG_BUSY_ORDER_10_SEC:
+		case H_LONG_BUSY_ORDER_100_SEC:
 			return -EBUSY;
-		case H_Function: /* fall through */
+		case H_FUNCTION: /* fall through */
 		default:
 			return -EPERM;
 	}

trunk/arch/powerpc/platforms/pseries/lpar.c

@@ -72,7 +72,7 @@ static void udbg_hvsi_putc(char c)
 
 	do {
 		rc = plpar_put_term_char(vtermno, sizeof(packet), packet);
-	} while (rc == H_Busy);
+	} while (rc == H_BUSY);
 }
 
 static long hvsi_udbg_buf_len;
@@ -85,7 +85,7 @@ static int udbg_hvsi_getc_poll(void)
 
 	if (hvsi_udbg_buf_len == 0) {
 		rc = plpar_get_term_char(vtermno, &hvsi_udbg_buf_len, hvsi_udbg_buf);
-		if (rc != H_Success || hvsi_udbg_buf[0] != 0xff) {
+		if (rc != H_SUCCESS || hvsi_udbg_buf[0] != 0xff) {
 			/* bad read or non-data packet */
 			hvsi_udbg_buf_len = 0;
 		} else {
@@ -139,7 +139,7 @@ static void udbg_putcLP(char c)
 	buf[0] = c;
 	do {
 		rc = plpar_put_term_char(vtermno, 1, buf);
-	} while(rc == H_Busy);
+	} while(rc == H_BUSY);
 }
 
 /* Buffered chars getc */
@@ -158,7 +158,7 @@ static int udbg_getc_pollLP(void)
 		/* get some more chars. */
 		inbuflen = 0;
 		rc = plpar_get_term_char(vtermno, &inbuflen, buf);
-		if (rc != H_Success)
+		if (rc != H_SUCCESS)
 			inbuflen = 0;	/* otherwise inbuflen is garbage */
 	}
 	if (inbuflen <= 0 || inbuflen > 16) {
@@ -304,7 +304,7 @@ long pSeries_lpar_hpte_insert(unsigned long hpte_group,
 
 	lpar_rc = plpar_hcall(H_ENTER, flags, hpte_group, hpte_v,
 			      hpte_r, &slot, &dummy0, &dummy1);
-	if (unlikely(lpar_rc == H_PTEG_Full)) {
+	if (unlikely(lpar_rc == H_PTEG_FULL)) {
 		if (!(vflags & HPTE_V_BOLTED))
 			DBG_LOW(" full\n");
 		return -1;
@@ -315,7 +315,7 @@ long pSeries_lpar_hpte_insert(unsigned long hpte_group,
 	 * will fail. However we must catch the failure in hash_page
 	 * or we will loop forever, so return -2 in this case.
 	 */
-	if (unlikely(lpar_rc != H_Success)) {
+	if (unlikely(lpar_rc != H_SUCCESS)) {
 		if (!(vflags & HPTE_V_BOLTED))
 			DBG_LOW(" lpar err %d\n", lpar_rc);
 		return -2;
@@ -346,9 +346,9 @@ static long pSeries_lpar_hpte_remove(unsigned long hpte_group)
 		/* don't remove a bolted entry */
 		lpar_rc = plpar_pte_remove(H_ANDCOND, hpte_group + slot_offset,
 					   (0x1UL << 4), &dummy1, &dummy2);
-		if (lpar_rc == H_Success)
+		if (lpar_rc == H_SUCCESS)
 			return i;
-		BUG_ON(lpar_rc != H_Not_Found);
+		BUG_ON(lpar_rc != H_NOT_FOUND);
 
 		slot_offset++;
 		slot_offset &= 0x7;
@@ -391,14 +391,14 @@ static long pSeries_lpar_hpte_updatepp(unsigned long slot,
 
 	lpar_rc = plpar_pte_protect(flags, slot, want_v & HPTE_V_AVPN);
 
-	if (lpar_rc == H_Not_Found) {
+	if (lpar_rc == H_NOT_FOUND) {
 		DBG_LOW("not found !\n");
 		return -1;
 	}
 
 	DBG_LOW("ok\n");
 
-	BUG_ON(lpar_rc != H_Success);
+	BUG_ON(lpar_rc != H_SUCCESS);
 
 	return 0;
 }
@@ -417,7 +417,7 @@ static unsigned long pSeries_lpar_hpte_getword0(unsigned long slot)
 
 	lpar_rc = plpar_pte_read(flags, slot, &dword0, &dummy_word1);
 
-	BUG_ON(lpar_rc != H_Success);
+	BUG_ON(lpar_rc != H_SUCCESS);
 
 	return dword0;
 }
@@ -468,7 +468,7 @@ static void pSeries_lpar_hpte_updateboltedpp(unsigned long newpp,
 	flags = newpp & 7;
 	lpar_rc = plpar_pte_protect(flags, slot, 0);
 
-	BUG_ON(lpar_rc != H_Success);
+	BUG_ON(lpar_rc != H_SUCCESS);
 }
 
 static void pSeries_lpar_hpte_invalidate(unsigned long slot, unsigned long va,
@@ -484,10 +484,10 @@ static void pSeries_lpar_hpte_invalidate(unsigned long slot, unsigned long va,
 	want_v = hpte_encode_v(va, psize);
 	lpar_rc = plpar_pte_remove(H_AVPN, slot, want_v & HPTE_V_AVPN,
 				   &dummy1, &dummy2);
-	if (lpar_rc == H_Not_Found)
+	if (lpar_rc == H_NOT_FOUND)
 		return;
 
-	BUG_ON(lpar_rc != H_Success);
+	BUG_ON(lpar_rc != H_SUCCESS);
 }
 
 /*

trunk/arch/powerpc/platforms/pseries/setup.c

@@ -463,7 +463,7 @@ static void pseries_dedicated_idle_sleep(void)
 	 * very low priority.  The cede enables interrupts, which
 	 * doesn't matter here.
 	 */
-	if (!lppaca[cpu ^ 1].idle || poll_pending() == H_Pending)
+	if (!lppaca[cpu ^ 1].idle || poll_pending() == H_PENDING)
 		cede_processor();
 
 out:

trunk/arch/powerpc/platforms/pseries/vio.c

@@ -258,7 +258,7 @@ EXPORT_SYMBOL(vio_find_node);
 int vio_enable_interrupts(struct vio_dev *dev)
 {
 	int rc = h_vio_signal(dev->unit_address, VIO_IRQ_ENABLE);
-	if (rc != H_Success)
+	if (rc != H_SUCCESS)
 		printk(KERN_ERR "vio: Error 0x%x enabling interrupts\n", rc);
 	return rc;
 }
@@ -267,7 +267,7 @@ EXPORT_SYMBOL(vio_enable_interrupts);
 int vio_disable_interrupts(struct vio_dev *dev)
 {
 	int rc = h_vio_signal(dev->unit_address, VIO_IRQ_DISABLE);
-	if (rc != H_Success)
+	if (rc != H_SUCCESS)
 		printk(KERN_ERR "vio: Error 0x%x disabling interrupts\n", rc);
 	return rc;
 }

trunk/arch/powerpc/platforms/pseries/xics.c

@@ -168,7 +168,7 @@ static int pSeriesLP_xirr_info_get(int n_cpu)
 	unsigned long return_value;
 
 	lpar_rc = plpar_xirr(&return_value);
-	if (lpar_rc != H_Success)
+	if (lpar_rc != H_SUCCESS)
 		panic(" bad return code xirr - rc = %lx \n", lpar_rc);
 	return (int)return_value;
 }
@@ -179,7 +179,7 @@ static void pSeriesLP_xirr_info_set(int n_cpu, int value)
 	unsigned long val64 = value & 0xffffffff;
 
 	lpar_rc = plpar_eoi(val64);
-	if (lpar_rc != H_Success)
+	if (lpar_rc != H_SUCCESS)
 		panic("bad return code EOI - rc = %ld, value=%lx\n", lpar_rc,
 		      val64);
 }
@@ -189,7 +189,7 @@ void pSeriesLP_cppr_info(int n_cpu, u8 value)
 	unsigned long lpar_rc;
 
 	lpar_rc = plpar_cppr(value);
-	if (lpar_rc != H_Success)
+	if (lpar_rc != H_SUCCESS)
 		panic("bad return code cppr - rc = %lx\n", lpar_rc);
 }
 
@@ -198,7 +198,7 @@ static void pSeriesLP_qirr_info(int n_cpu , u8 value)
 	unsigned long lpar_rc;
 
 	lpar_rc = plpar_ipi(get_hard_smp_processor_id(n_cpu), value);
-	if (lpar_rc != H_Success)
+	if (lpar_rc != H_SUCCESS)
 		panic("bad return code qirr - rc = %lx\n", lpar_rc);
 }
 

trunk/drivers/char/hvcs.c

@@ -904,7 +904,7 @@ static int hvcs_enable_device(struct hvcs_struct *hvcsd, uint32_t unit_address,
 		 * It is possible the vty-server was removed after the irq was
 		 * requested but before we have time to enable interrupts.
 		 */
-		if (vio_enable_interrupts(vdev) == H_Success)
+		if (vio_enable_interrupts(vdev) == H_SUCCESS)
 			return 0;
 		else {
 			printk(KERN_ERR "HVCS: int enable failed for"