Merge tag 'asoc-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/g…

…it/broonie/sound into for-next

ASoC: Updates  for v3.14

Not a lot going on framework wise, partly due to Christmas at least in
the case of the work I've been doing, but there's been quite a lot of
cleanup activity going on and the usual trickle of new drivers:

 - Update to the generic DMA code to support deferred probe and managed
   resources.
 - New drivers for BCM2835 (used in Raspberry Pi), Tegra with MAX98090
   and Analog Devices AXI I2S and S/PDIF controller IPs.
 - Device tree support for the simple card, max98090 and cs42l52.
 - Conversion of the Samsung drivers to native dmaengine, making them
   multiplatform compatible and hopefully helping keep them more modern
   and up to date.
 - More regmap conversions, including a very welcome one for twl6040
   from Peter Ujfalusi.
 - A big overhaul of the DaVinci drivers also from Peter Ujfalusi.

Documentation/block/null_blk.txt

@@ -0,0 +1,72 @@
+Null block device driver
+================================================================================
+
+I. Overview
+
+The null block device (/dev/nullb*) is used for benchmarking the various
+block-layer implementations. It emulates a block device of X gigabytes in size.
+The following instances are possible:
+
+  Single-queue block-layer
+    - Request-based.
+    - Single submission queue per device.
+    - Implements IO scheduling algorithms (CFQ, Deadline, noop).
+  Multi-queue block-layer
+    - Request-based.
+    - Configurable submission queues per device.
+  No block-layer (Known as bio-based)
+    - Bio-based. IO requests are submitted directly to the device driver.
+    - Directly accepts bio data structure and returns them.
+
+All of them have a completion queue for each core in the system.
+
+II. Module parameters applicable for all instances:
+
+queue_mode=[0-2]: Default: 2-Multi-queue
+  Selects which block-layer the module should instantiate with.
+
+  0: Bio-based.
+  1: Single-queue.
+  2: Multi-queue.
+
+home_node=[0--nr_nodes]: Default: NUMA_NO_NODE
+  Selects what CPU node the data structures are allocated from.
+
+gb=[Size in GB]: Default: 250GB
+  The size of the device reported to the system.
+
+bs=[Block size (in bytes)]: Default: 512 bytes
+  The block size reported to the system.
+
+nr_devices=[Number of devices]: Default: 2
+  Number of block devices instantiated. They are instantiated as /dev/nullb0,
+  etc.
+
+irq_mode=[0-2]: Default: 1-Soft-irq
+  The completion mode used for completing IOs to the block-layer.
+
+  0: None.
+  1: Soft-irq. Uses IPI to complete IOs across CPU nodes. Simulates the overhead
+     when IOs are issued from another CPU node than the home the device is
+     connected to.
+  2: Timer: Waits a specific period (completion_nsec) for each IO before
+     completion.
+
+completion_nsec=[ns]: Default: 10.000ns
+  Combined with irq_mode=2 (timer). The time each completion event must wait.
+
+submit_queues=[0..nr_cpus]:
+  The number of submission queues attached to the device driver. If unset, it
+  defaults to 1 on single-queue and bio-based instances. For multi-queue,
+  it is ignored when use_per_node_hctx module parameter is 1.
+
+hw_queue_depth=[0..qdepth]: Default: 64
+  The hardware queue depth of the device.
+
+III: Multi-queue specific parameters
+
+use_per_node_hctx=[0/1]: Default: 0
+  0: The number of submit queues are set to the value of the submit_queues
+     parameter.
+  1: The multi-queue block layer is instantiated with a hardware dispatch
+     queue for each CPU node in the system.

Documentation/devicetree/bindings/sound/adi,axi-i2s.txt

@@ -0,0 +1,31 @@
+ADI AXI-I2S controller
+
+Required properties:
+ - compatible : Must be "adi,axi-i2s-1.00.a"
+ - reg : Must contain I2S core's registers location and length
+ - clocks : Pairs of phandle and specifier referencing the controller's clocks.
+   The controller expects two clocks, the clock used for the AXI interface and
+   the clock used as the sampling rate reference clock sample.
+ - clock-names : "axi" for the clock to the AXI interface, "ref" for the sample
+   rate reference clock.
+ - dmas: Pairs of phandle and specifier for the DMA channels that are used by
+   the core. The core expects two dma channels, one for transmit and one for
+   receive.
+ - dma-names : "tx" for the transmit channel, "rx" for the receive channel.
+
+For more details on the 'dma', 'dma-names', 'clock' and 'clock-names' properties
+please check:
+	* resource-names.txt
+	* clock/clock-bindings.txt
+	* dma/dma.txt
+
+Example:
+
+	i2s: i2s@0x77600000 {
+		compatible = "adi,axi-i2s-1.00.a";
+		reg = <0x77600000 0x1000>;
+		clocks = <&clk 15>, <&audio_clock>;
+		clock-names = "axi", "ref";
+		dmas = <&ps7_dma 0>, <&ps7_dma 1>;
+		dma-names = "tx", "rx";
+	};

Documentation/devicetree/bindings/sound/adi,axi-spdif-tx.txt

@@ -0,0 +1,30 @@
+ADI AXI-SPDIF controller
+
+Required properties:
+ - compatible : Must be "adi,axi-spdif-1.00.a"
+ - reg : Must contain SPDIF core's registers location and length
+ - clocks : Pairs of phandle and specifier referencing the controller's clocks.
+   The controller expects two clocks, the clock used for the AXI interface and
+   the clock used as the sampling rate reference clock sample.
+ - clock-names: "axi" for the clock to the AXI interface, "ref" for the sample
+   rate reference clock.
+ - dmas: Pairs of phandle and specifier for the DMA channel that is used by
+   the core. The core expects one dma channel for transmit.
+ - dma-names : Must be "tx"
+
+For more details on the 'dma', 'dma-names', 'clock' and 'clock-names' properties
+please check:
+	* resource-names.txt
+	* clock/clock-bindings.txt
+	* dma/dma.txt
+
+Example:
+
+	spdif: spdif@0x77400000 {
+		compatible = "adi,axi-spdif-tx-1.00.a";
+		reg = <0x77600000 0x1000>;
+		clocks = <&clk 15>, <&audio_clock>;
+		clock-names = "axi", "ref";
+		dmas = <&ps7_dma 0>;
+		dma-names = "tx";
+	};

Documentation/devicetree/bindings/sound/bcm2835-i2s.txt

@@ -0,0 +1,25 @@
+* Broadcom BCM2835 SoC I2S/PCM module
+
+Required properties:
+- compatible: "brcm,bcm2835-i2s"
+- reg: A list of base address and size entries:
+	* The first entry should cover the PCM registers
+	* The second entry should cover the PCM clock registers
+- dmas: List of DMA controller phandle and DMA request line ordered pairs.
+- dma-names: Identifier string for each DMA request line in the dmas property.
+  These strings correspond 1:1 with the ordered pairs in dmas.
+
+  One of the DMA channels will be responsible for transmission (should be
+  named "tx") and one for reception (should be named "rx").
+
+Example:
+
+bcm2835_i2s: i2s@7e203000 {
+	compatible = "brcm,bcm2835-i2s";
+	reg = <0x7e203000 0x20>,
+	      <0x7e101098 0x02>;
+
+	dmas = <&dma 2>,
+	       <&dma 3>;
+	dma-names = "tx", "rx";
+};

Documentation/devicetree/bindings/sound/cs42l52.txt

@@ -0,0 +1,46 @@
+CS42L52 audio CODEC
+
+Required properties:
+
+  - compatible : "cirrus,cs42l52"
+
+  - reg : the I2C address of the device for I2C
+
+Optional properties:
+
+  - cirrus,reset-gpio : GPIO controller's phandle and the number
+  of the GPIO used to reset the codec.
+
+  - cirrus,chgfreq-divisor : Values used to set the Charge Pump Frequency.
+  Allowable values of 0x00 through 0x0F. These are raw values written to the
+  register, not the actual frequency. The frequency is determined by the following.
+  Frequency = (64xFs)/(N+2)
+  N = chgfreq_val
+  Fs = Sample Rate (variable)
+
+  - cirrus,mica-differential-cfg : boolean, If present, then the MICA input is configured
+  as a differential input. If not present then the MICA input is configured as
+  Single-ended input. Single-ended mode allows for MIC1 or MIC2 muxing for input.
+
+  - cirrus,micb-differential-cfg : boolean, If present, then the MICB input is configured
+  as a differential input. If not present then the MICB input is configured as
+  Single-ended input. Single-ended mode allows for MIC1 or MIC2 muxing for input.
+
+  - cirrus,micbias-lvl: Set the output voltage level on the MICBIAS Pin
+  0 = 0.5 x VA
+  1 = 0.6 x VA
+  2 = 0.7 x VA
+  3 = 0.8 x VA
+  4 = 0.83 x VA
+  5 = 0.91 x VA
+
+Example:
+
+codec: codec@4a {
+	compatible = "cirrus,cs42l52";
+	reg = <0x4a>;
+	reset-gpio = <&gpio 10 0>;
+	cirrus,chgfreq-divisor = <0x05>;
+	cirrus.mica-differential-cfg;
+	cirrus,micbias-lvl = <5>;
+};

Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt

@@ -4,7 +4,8 @@ Required properties:
 - compatible :
 	"ti,dm646x-mcasp-audio"	: for DM646x platforms
 	"ti,da830-mcasp-audio"	: for both DA830 & DA850 platforms
-	"ti,am33xx-mcasp-audio"	: for AM33xx platforms (AM33xx, TI81xx)
+	"ti,am33xx-mcasp-audio"	: for AM33xx platforms (AM33xx, AM43xx, TI81xx)
+	"ti,dra7-mcasp-audio"	: for DRA7xx platforms
 
 - reg : Should contain reg specifiers for the entries in the reg-names property.
 - reg-names : Should contain:
@@ -36,7 +37,8 @@ Optional properties:
 - pinctrl-0: Should specify pin control group used for this controller.
 - pinctrl-names: Should contain only one value - "default", for more details
   		 please refer to pinctrl-bindings.txt
-
+- fck_parent : Should contain a valid clock name which will be used as parent
+	       for the McASP fck
 
 Example:
 

Documentation/devicetree/bindings/sound/fsl-sai.txt

@@ -0,0 +1,40 @@
+Freescale Synchronous Audio Interface (SAI).
+
+The SAI is based on I2S module that used communicating with audio codecs,
+which provides a synchronous audio interface that supports fullduplex
+serial interfaces with frame synchronization such as I2S, AC97, TDM, and
+codec/DSP interfaces.
+
+
+Required properties:
+- compatible: Compatible list, contains "fsl,vf610-sai".
+- reg: Offset and length of the register set for the device.
+- clocks: Must contain an entry for each entry in clock-names.
+- clock-names : Must include the "sai" entry.
+- dmas : Generic dma devicetree binding as described in
+  Documentation/devicetree/bindings/dma/dma.txt.
+- dma-names : Two dmas have to be defined, "tx" and "rx".
+- pinctrl-names: Must contain a "default" entry.
+- pinctrl-NNN: One property must exist for each entry in pinctrl-names.
+  See ../pinctrl/pinctrl-bindings.txt for details of the property values.
+- big-endian-regs: If this property is absent, the little endian mode will
+  be in use as default, or the big endian mode will be in use for all the
+  device registers.
+- big-endian-data: If this property is absent, the little endian mode will
+  be in use as default, or the big endian mode will be in use for all the
+  fifo data.
+
+Example:
+sai2: sai@40031000 {
+	      compatible = "fsl,vf610-sai";
+	      reg = <0x40031000 0x1000>;
+	      pinctrl-names = "default";
+	      pinctrl-0 = <&pinctrl_sai2_1>;
+	      clocks = <&clks VF610_CLK_SAI2>;
+	      clock-names = "sai";
+	      dma-names = "tx", "rx";
+	      dmas = <&edma0 0 VF610_EDMA_MUXID0_SAI2_TX>,
+		   <&edma0 0 VF610_EDMA_MUXID0_SAI2_RX>;
+	      big-endian-regs;
+	      big-endian-data;
+};

Documentation/devicetree/bindings/sound/hdmi.txt

@@ -0,0 +1,17 @@
+Device-Tree bindings for dummy HDMI codec
+
+Required properties:
+	- compatible: should be "linux,hdmi-audio".
+
+CODEC output pins:
+  * TX
+
+CODEC input pins:
+  * RX
+
+Example node:
+
+	hdmi_audio: hdmi_audio@0 {
+		compatible = "linux,hdmi-audio";
+		status = "okay";
+	};

Documentation/devicetree/bindings/sound/max98090.txt

@@ -0,0 +1,43 @@
+MAX98090 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+- compatible : "maxim,max98090".
+
+- reg : The I2C address of the device.
+
+- interrupts : The CODEC's interrupt output.
+
+Pins on the device (for linking into audio routes):
+
+  * MIC1
+  * MIC2
+  * DMICL
+  * DMICR
+  * IN1
+  * IN2
+  * IN3
+  * IN4
+  * IN5
+  * IN6
+  * IN12
+  * IN34
+  * IN56
+  * HPL
+  * HPR
+  * SPKL
+  * SPKR
+  * RCVL
+  * RCVR
+  * MICBIAS
+
+Example:
+
+audio-codec@10 {
+	compatible = "maxim,max98090";
+	reg = <0x10>;
+	interrupt-parent = <&gpio>;
+	interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>;
+};

Documentation/devicetree/bindings/sound/nvidia,tegra-audio-max98090.txt

@@ -0,0 +1,51 @@
+NVIDIA Tegra audio complex, with MAX98090 CODEC
+
+Required properties:
+- compatible : "nvidia,tegra-audio-max98090"
+- clocks : Must contain an entry for each entry in clock-names.
+  See ../clocks/clock-bindings.txt for details.
+- clock-names : Must include the following entries:
+  - pll_a
+  - pll_a_out0
+  - mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
+- nvidia,model : The user-visible name of this sound complex.
+- nvidia,audio-routing : A list of the connections between audio components.
+  Each entry is a pair of strings, the first being the connection's sink,
+  the second being the connection's source. Valid names for sources and
+  sinks are the MAX98090's pins (as documented in its binding), and the jacks
+  on the board:
+
+  * Headphones
+  * Speakers
+  * Mic Jack
+
+- nvidia,i2s-controller : The phandle of the Tegra I2S controller that's
+  connected to the CODEC.
+- nvidia,audio-codec : The phandle of the MAX98090 audio codec.
+
+Optional properties:
+- nvidia,hp-det-gpios : The GPIO that detect headphones are plugged in
+
+Example:
+
+sound {
+	compatible = "nvidia,tegra-audio-max98090-venice2",
+		     "nvidia,tegra-audio-max98090";
+	nvidia,model = "NVIDIA Tegra Venice2";
+
+	nvidia,audio-routing =
+		"Headphones", "HPR",
+		"Headphones", "HPL",
+		"Speakers", "SPKR",
+		"Speakers", "SPKL",
+		"Mic Jack", "MICBIAS",
+		"IN34", "Mic Jack";
+
+	nvidia,i2s-controller = <&tegra_i2s1>;
+	nvidia,audio-codec = <&acodec>;
+
+	clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
+		 <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
+		 <&tegra_car TEGRA124_CLK_EXTERN1>;
+	clock-names = "pll_a", "pll_a_out0", "mclk";
+};